The student collected data in the mass of each artificial cell the student predicted that the cell in the beaker with 25% auger solution would have the greatest change in mass after 24 hours would his predictions be correct support you answer

Peroxides species shows the correct charge of the oxide ion.

As predicted by the two partially filled outer orbitals, oxygen assumes a negative oxidation state in all of its molecules. The oxide ion O2 is produced when electron transport fills these orbitals. It is thought that each oxygen in peroxides (species that contain the ion O2 2) has a charge of 1.

The carbon and hydrogen atoms have a slight positive charge, while the oxygen atom has a slight negative charge.

There are six valence electrons in the atom of oxygen. The oxygen atom requires two additional electrons in order to complete its valence shell. Adding two more electrons gives the oxygen ion a charge of two because each electron has a single negative charge.

To know about oxide ion

https://brainly.com/question/10931958

#SPJ4

A 5-carbon sugar, a phosphate group, and a nitrogenous base make form a nucleic acid monomer known as An ​Nucleotide

A nucleotide is the initial building step of nucleic acids (RNA and DNA). A sugar molecule (either ribose in RNA or deoxyribose in DNA), a phosphate group, and a base containing nitrogen make up a nucleotide. DNA uses the nucleotides adenine (A), cytosine (C), guanine (G), and thymine (T).

Biopolymers and macromolecules called nucleic acids are necessary for all known forms of life. They are constructed of monomers called nucleotides, which are composed of a nitrogenous base, a phosphate group, and a 5-carbon sugar.

To learn more about ​Nucleic acids :

https://brainly.com/question/30038685

#SPJ4

It will take 130 minutes for 750 mg of lidocaine to be administered if the rate is set at 5 ml/min.

To calculate this, first, we have to convert the 750 mg of lidocaine to mL. Since each 150 mL contains 500 mg of the drug lidocaine, 750 mg is equivalent to 1.5 mL. Then, divide 1.5 mL by the rate of 5 mL/min to get the total time in minutes. Therefore,

1.5 mL/5 mL/min = 0.3 minutes,

and 0.3 minutes x 60 minutes/1 minute = 30 minutes.

Since 750 mg of lidocaine is equivalent to 1.5 mL, it will take 130 minutes to administer 750 mg of lidocaine at a rate of 5 mL/min.

Learn more about lidocaine:

https://brainly.com/question/30209250

#SPJ4

There are 0.231 moles of ¹³C in 3.00 grams of ¹³C. This can be calculated using the molar mass and dimensional analysis concepts of chemistry.

¹³C is an isotope of carbon with a mass number of 13 grams. It is a natural, stable isotope of carbon with a nucleus containing 6 protons and 7 neutrons that is why it is a heavy isotope.

Molar mass is a fundamental concept in chemistry that is used to convert various quantities such as masses, moles, and the number of atoms/molecules in an element. Dimensional analysis is used to convert one quantity to another, with molar mass serving as a conversion factor.

1 mol = 6.022 X 10²³ atoms (Avogadro's Number)

In the question asked above,

Given the mass number of ¹³C (13 grams),

the molar mass of ¹³C = 13 g ¹³C / 1 mol ¹³C = 13 g then,

moles of  ¹³C = 3.00g ¹³C X (1 mol  ¹³C / 13 g  ¹³C )

                     = 0.231 moles of  ¹³C in 3.00 g of  ¹³C

Meanwhile, there are 6.022 X 10²³ atoms in 1 mole of ¹³C .

Thus,

number of ¹³C atoms = 0.23 mole of ¹³C  X (6.022 X 10²³ atoms ¹³C/ 1mol¹³C ).

                                   = 1.40 X 10²³ ¹³C atoms in 3gms of ¹³C.

Learn more about Avogadro's Number here:

https://brainly.com/question/3994829

#SPJ4

Answer:

Ideal Gas Law?

Explanation:

PV = nRT

V is proportional to T thus at constant P it should increase with T

Answer:

The law that states that volume increases with temperature (at constant pressure) is known as Gay-Lussac's Law or the pressure-volume law. It states that the volume of a gas is directly proportional to its temperature, when the pressure is kept constant. This means that if the temperature of a gas is increased, its volume will also increase, and if the temperature is decreased, the volume will decrease. This law is a part of the ideal gas laws, which describe the behavior of gases under various conditions.

Hope this helps! Enjoy Learning!<3

The first step in a research project is to think about the purpose of the research project. This helps to guide the focus and direction of the project, making it easier to formulate a clear and concise thesis statement. From there, the next step would be to consult resources and gather all the research needed to support the project's purpose.

To support your research, you will need to collect data or information that is relevant and credible to your research question. The type of data you collect will depend on the research method you choose to use, such as qualitative or quantitative research. In qualitative research, data may include observations, interviews, or focus groups. In quantitative research, data may include numerical data, survey results, or experimental results. You may also need to collect secondary data from sources such as academic journals, books, or government reports to support your research. It is important to ensure that the data you collect is reliable and valid, so you may need to triangulate sources or use multiple methods to collect data.

To know more about Research visit: https://brainly.com/question/18723483

#SPJ4

Answer:

0.458 moles

Explanation:

In this case, the number of moles of sulphuric acid will be 45.0 grams, divided by molar mass 98.08 grams per mole and we obtain 0.458 moles.

If no specific instructions for disposing of waste chemicals are given, you should dispose of all liquids and solutions into a designated waste container in accordance with local, state, and federal regulations.

It is important to check with local authorities to determine the proper disposal methods for hazardous materials. For example, some chemicals may require special treatment such as neutralization, incineration, or containment for disposal.

Additionally, some chemicals must be disposed of in specific containers, such as heavy-duty plastic bags, to prevent contamination of the environment.

Learn more about disposal of chemical waste:

https://brainly.com/question/14638617

#SPJ4

Avogadro's number is the number of atoms in one mole of atoms. It is also called Avogadro's constant.

Moles is the the measure of quantities of atoms, particles, or molecules in units. Moles are based on a number called the Avogadro constant. one can say that one mole of hydrogen atoms have 6.02214076 × 1023 hydrogen atoms. If it has two moles of oxygen molecules then it has  have 2 × 6.02214076 × 1023 = 1.20442815 × 1024 oxygen molecules. if we say that we have 9.853 moles of methane molecules, we know that we have 9.853 × 6.02214076 × 1023 = 5.93361529 × 1024 methane molecules. mole is just another quantity. Just like a pair means two, or half a dozen means six, a mole means 6.02214076 x 1023.

To learn more about Avogadro's Number please visit:

https://brainly.com/question/1513182

#SPJ4

According to Charle's law, temperature outside the piston of a volume of 5 liters is -60.99 °C or 212.16 K. Appropriate clothing for the weather is woollen clothes.

Charles law is an experimental gas law  which provides description about the behavior of gases  which tend to expand on heating.It states that, at constant pressure, the temperature  is in direct proportion  with the volume that is,V∝T or V₁/T₁=V₂/T₂.The relation between volume and temperature is linear as the temperature increases volume also increases.

The graph of volume versus temperature is a straight line passing through the origin.

On substitution of values in the above formula,

V₁/T₁=V₂/T₂

30/1273=5/T₂

T₂=1273×5/30

=212.16 K or -60.99°C.

Thus ,the temperature of the gas at 5 liter volume is -60.99°C.

Your question is incomplete most probably your full question was

I have made a thermometer which measures temperature by the compressing and expanding of gas in a piston. I have measured that at 1000 C the volume of the piston is 30 L. What is the temperature outside if the piston has a volume of 5 L? What would be appropriate clothing for the weather? I

this is about boyle’s and charles law :))

To look more about charles law click here

brainly.com/question/16927784

#SPJ4

An atom with more neutrons and more electrons than protons can be expected to have no net charge. This statement is False.

Matter atoms are electrically neutral because their nuclei have the same amount of protons as electrons around them. The separation of part of the negative charge of neutral atoms is involved in electric current and charged objects. Neutrons do not have a negative or positive charge. As a result, they have no net electric charge.

An atom is made up of a positively charged nucleus surrounded by one or more negatively charged electrons. Because the positive and negative charges are equal, the atom has no overall charge; it is electrically neutral.

To learn more about charge on atoms, here

https://brainly.com/question/14548352

#SPJ4

1 mole of BF3 is needed to produce 48.35 moles of NaF.

Given data :

The molecule of boron trifluoride is 1.5×1016 molecules

moles of NaF = 0.023816230233136  

48 NaF = 1.15x10^16 molecules

So, 1 mole of BF3 is needed to produce 48.35 moles of NaF.

Learn more about boron trifluoride gas refer to ;

https://brainly.com/question/16888536

#SPJ1

The molarity of HCL will be 2.45M.

In order to calculate the molarity of an unknown HCl solution based on titration results, the following equation must be used:

Molarity of HCl = (mass of THAM used / volume of THAM solution) / (volume of HCl used /total volume)

In this particular case, the mass of THAM used is 613 g, the volume of THAM solution is 250 mL, the volume of HCl used is 38.58 mL, and the total volume is 288.58 mL. Therefore, the calculation would be:

Molarity of HCl = (613 g /250 mL) / (38.58 mL /288.58 mL)

= 2.45 M

To learn more about molarity, click here:

https://brainly.com/question/14469428

#SPJ4

The molarity equation is as follows: Molarity is defined as moles of solute/liters of solution.

You can calculate the number of moles of solute if you know the molarity (concentration) of a solution and the total volume of the solution (be sure it is in liters). Afterward, you might need to convert the solute's moles to grams.

By percent by mass is another way for estimating the solute concentration in a solution. To do this, an equation of the form

The formula for mass percent is (mass of solute/mass of solution) X 100.

Percent by volume is a third technique for estimating the solute concentration in a solution. The formula for this is:

(Volume of Solute/Volume of Solution) X 100% is the formula for percent by volume.

Learn more about Molarity here:

brainly.com/question/29568864

#SPJ4

No, oxygen and phosphorus do not form an ionic bond. A metal and a nonmetal can establish ionic connections.

The metal loses one or more electrons to form a positive ion and the nonmetal gains those electrons to form a negative ion. Oxygen and phosphorus are both nonmetals, so they do not form ions, thus they cannot form an ionic bond. When Oxygen and Phosphorus react, they form covalent bonds, which are formed by the sharing of electrons between atoms. Covalent bonds are typically formed between nonmetals and can be found in compounds such as phosphoric acid (H3PO4) and phosphorous acid (H3PO3) which are covalent compounds. It is important to note that the classification of elements as metals or nonmetals is based on their physical and chemical properties, and some elements may exhibit characteristics of both. However, in general, Oxygen and Phosphorus are considered as nonmetals and they form covalent compounds, not ionic ones.

To know more about oxygen please refer: https://brainly.com/question/13370320

#SPJ4

Yes, Oxygen and sodium have an ionic bond.

Ionic bonding, a type of chemical bonding that involves the electrostatic attraction between two atoms or ions with radically different electronegativities, is the primary interaction occurring in ionic compounds.

Since sodium is a component of an alkali and oxygen is merely a non-metal and a gas, an ionic connection is created. As an example, the reaction between sodium and oxygen can produce sodium oxide. Sodium atoms are converted into sodium ions to produce the ionic compound sodium oxide. Atoms of sodium undergo oxidation, which results in the loss of electrons.

Na + O2 → NaO2 or 4Na + O2 → 2Na2O (s).

To learn more about ionic bond visit,

https://brainly.com/question/977324

#SPJ4

The mass of the isotope that will remain after seven half-lives is 2.69 grams.

Half -life of a substance is defined as the time which is required for half of the quantity of a radioactive substance to get decayed.It is a term which is used in nuclear chemistry for describing how quickly unstable atoms undergo radioactive decay into other nuclear species by emitting particles or the time which is required for number of disintegrations per second of radioactive material to decrease by one half of its initial value.

After 1 st half life:345/2=172.5 g

After 2 nd half life:172.5/2=86.25 g

After 3 rd half life:86.25/2=43.12 g

After 4 th half life:43.12/2=21.56 g

After 5 th half life:21.56/2=10.78 g

After 6th half life:10.78/2=5.39 g

After 7th half life:5.39/2=2.69 g

Thus, the mass of the isotope that will remain after seven half-lives is 2.69 grams.

Learn more about half life,here:

https://brainly.com/question/24710827

#SPJ1

The metal that becomes the isoelectronic with the krypton is strontium as it becomes Sr²⁺. They both have same number of the electrons.

The isoelectronic species is the species which have the same number of the electrons. The atomic number of the krypton is 36. The krypton is the element placed in the period 4 and the group 18. The number of the electrons krypton has 36 electrons. The strontium is a metal. The atomic number of the strontium is 38.

The number of electron in strontium , Sr = 38 electrons

The number of the electrons in Sr²⁺ = 36 electrons.

Thus, the krypton , Kr and the strontium, Sr²⁺ both are the isoelectronic species.

To learn more isoelectronic here

https://brainly.com/question/19333372

#SPJ4

The approximate concentration of solutes present in blood with an osmotic pressure of 7 atm is 0.135 M.

The osmotic pressure of a solution is directly proportional to the concentration of solutes in the solution. The relationship between osmotic pressure and concentration can be described using Van't Hoff equation: Π = iCRT where,

To find the approximate concentration of solutes in blood with an osmotic pressure of 7 atm, we can use the above equation and rearrange it to solve for C:

C = Π / (iRT)

Plugging in the known values and assuming a temperature of 37°C (310 K), we get:

C = 7 / (2 * 0.0821 * 310)

C = approximately 0.135 M

So the approximate concentration of solutes present in blood with an osmotic pressure of 7 atm is 0.135 M.

Learn more about osmotic pressure here:

https://brainly.com/question/25904085

#SPJ4

The diagram that showing a balanced force represents the stopped elevator on a floor. Thus, diagram A represents the stopped elevator.

Force is an external agent actin on an object to change its motion or to deform it. There are various kinds of forces such as frictional force, gravitational force, magnetic force etc.

If two or more same or different forces acting on an object from the same side they will add up in magnitude. If two forces with same magnitude are acting from opposite direction of the object, then they will cancel each other and the net force will become zero. This situation is called the balanced force.

If two unequal force acts from opposite direction, the net force is the substracted value of their magnitudes and the situation is called unbalanced force.

A balanced force does not make a displacement of the body. In situation A, normal force of 3N get cancelled by 3 N by gravity. Similarly 5N to the right gets cancelled by 5N to the left. Therefore, the elevator is not moving and it is stopped on floor.

Find more on balanced force:

https://brainly.com/question/29268601

#SPJ1

0.5 * x + 0.9 * y = 0.6 * is the equation that represents the total liters of acid that are needed.

What is an equation?

An equation is a mathematical statement that asserts the equality of two expressions. It uses an equal sign (=) to show that the expressions on either side of the sign have the same value. Equations are typically used to solve problems by finding the unknown values of certain variables.

The total amount of acid in the 50% solution can be represented as 0.5 * x liters.

The total amount of acid in the 90% solution can be represented as 0.9 * y liters.

The total amount of acid in the mixture of the two solutions should equal to 0.6 * liters, which is equal to the desired 60% solution.

So, the equation representing the total liters of acid needed is:

0.5 * x + 0.9 * y = 0.6 *

This equation represents the relationship between the liters of the two solutions used and the total amount of acid in the solution.

Therefore, 0.5 * x + 0.9 * y = 0.6 * is the equation.

To learn more about equation from the link

https://brainly.com/question/1284310

#SPJ4

"A nucleus for whom the chemical shift must have been reduced due to the addition of electron density, magnetic induction, or even other effects," according to the definition.

As electrons orbit the nucleus, they significantly change the magnetic field that even the nucleus experiences, which modifies the difference among energy levels, culminating in the spectrum. However, these adjustments are based on a specific reference as well as hence are relative.

Electron shielding is the nucleus's inhibition of valence shell electron attraction due to the existence of inner-shell electrons. Due to the spherical form of the s orbital, electrons inside an s orbital can shelter p electrons with the same energy level.

To know more about chemical shift

https://brainly.com/question/14788457

#SPJ4

Lithium metal does not react with oxygen gas (O2) under normal conditions. However, when lithium is heated to high temperatures or is exposed to a strong oxidizing agent, it can react with oxygen to form lithium oxide (Li2O).

Lithium metal is a highly reactive, soft, and silver-white metal. It is the lightest metal and the least dense solid element. Lithium has the atomic number 3 and is represented by the symbol Li. It is primarily used in batteries for portable electronic devices and electric vehicles. It is also used in the production of certain types of glass and ceramics, as well as in the aerospace industry for lightweight alloys. Due to its high reactivity, lithium metal must be stored in a dry, airtight container to prevent oxidation.

To know more about lithium metal please refer:

https://brainly.com/question/17086478

#SPJ4

Answer: It's 50.69% abundant

Explanation:

Answer:

Electrically neutral atoms simply possess the same number of electrons as protons.

Explanation:

This gives the objects a balance of both type of charge. There are 11 electrons and 10 protons.

The statement is True. Electrically neutral atoms have an equal number of electrons and protons, balancing out the atomic charges and making the atom neutral.

The statement 'Electrically neutral atoms have equal numbers of electrons and protons' is True. In an electrically neutral atom, the number of protons in the nucleus is exactly balanced by the number of electrons surrounding the nucleus. This is due to the fact that the proton has a positive charge, and the electron has an equivalent but negative charge. So, when the number of protons equals the number of electrons, these charges cancel each other out and the atom as a whole is neutral.

https://brainly.com/question/33440812

#SPJ6

The number 6.02 x 10^23 is known as Avogadro's number, named after the Italian scientist Amedeo Avogadro. It is the number of atoms, molecules, or other entities in one mole of a substance.

The definition of a mole is based on the number of atoms in a sample of an element. It is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are in 12 grams of pure carbon-12. Since carbon-12 is the most common isotope of carbon and has a precisely known number of atoms, it was chosen as the reference element to define the mole.

Avogadro discovered that the number of atoms in 12 grams of carbon-12 is 6.02 x 10^23. This number is known as Avogadro's number and is now widely accepted as the number of atoms or entities in one mole of a substance.

Therefore, the mole is defined as 6.02 x 10^23 atoms, molecules or other entities and is used as a convenient way to express the large numbers of atoms, molecules or other entities found in most samples of matter in chemistry.

Learn more about Avogadro's number here: https://brainly.com/question/11907018

#SPJ4

41.8 g of water will change its temperature by 3 °C when 525 J of heat is added to it.

According to question:-

Change in temperature(ΔT) = 3.0 °C

Heat absorbed(Q) = 525 J

Formula to be used : Q = m.c. ΔT

where, m = mass of given substance and since value of c (specific heat capacity of substance) is not given in the question, I'm going to use the value : c = 4.184 J/g°C

Specific heat capacity is the amount of heat absorbed to increase the temperature of 1kg of substance by 1 °C (or 1 kelvin).

Putting the values in the formula, we get:-

525 J = m × 4.184 J/g °C  × 3.0°C

525 J = m × 12.552 J/g

m =  525 J/ 12.552 J/g

m = 41.8 g

To know more about specific heat capacity, click here: https://brainly.com/question/27991746

#SPJ4

The valence shell of carbon contains four electrons. Each of these electrons are shared with a hydrogen atom. Consequently, the carbon and hydrogen atoms in the methane (CH4) molecule share four electron pairs.

The CH4 molecule does not contain an unshared pair of electrons.Due to the fact that carbon has a valence of 4, it can only make a maximum of 4 bonds with other atoms. Since the hydrogen only has one electron, it can only create one bond. Here, one electron from each hydrogen atom and each of the four valence electrons of carbon are shared, generating four sigma covalent connections. As a result, all of the valence electrons on carbon and hydrogen participate in the creation of the bond and no unshared pair of electrons is left.

Learn more about electrons here:

https://brainly.com/question/1255220

#SPJ4

47.1 ml of acetone has a mass of 37.2 g when the density is 0.7899 g/ml.

As stated in the question,

the density of acetone = 0.7899 g/ml

as we know, the mass of a substance per unit of volume is its density which means 0.7899 g ( mass) is present in 1 ml (volume). Hence, by the unitary method:

0.7899 g -> 1ml

1g-> 1/0.7899 ml

37.2 g -> 37.2/0.7899 ml = 47.1 ml

47.1 ml of acetone has a mass of 37.2 g.

To learn more about the 'unitary method ' try the:

https://brainly.com/question/24587372

#SPJ4