Answer:
Electrons
Explanation:
Isotopes are atoms which have the same number of protons and electrons but a different number of neutrons. This is also the reason why there are no other changes in the atom but the mass of the specific atom changes.
Hope this helps :)
Merry Christmas. Have fun.
Why do some atoms form chemical bonds while others do not?
Answer:
Atoms of these elements have full outer electron shells. These atoms are stable and very rarely form bonds with other atoms. If the electronegativity values between two atoms are comparable, they may still form chemical bonds to increase the stability of their valence electron shell
Explanation:
Which atom has the largest atomic radius? *
1.Cl
2.F
3.I
Answer: 2
Explanation:I think
Fill in the blank:
A correctly written hypothesis uses an ____ ______ statement
Answer:
a theory of a experiment and the experiment acts like a judge determining if the hypothesis is right or wrong from the final test result
Explanation:
The barometric pressure in Breckenridge, Colorado (elevation 9600 ft) is 580 mmHg. How many kPa is this?
Answer:
1 atmospheric pressure = 760.0 mm Hg
Thus 580 mm Hg = (580 mm Hg/(760 mm Hg/atm))
= 0.763 atm
Why do trees not yet colonize the island?
how many grams of baf2 are dissolved in 75.0 ml of a saturated solution of baf2? ksp = 1.00 x 10-6
Using the solubility product of the saturated solution, the mass of BaF2 dissolved is 0.083 g.
The equation of the reaction is obtained from;
BaF2(s) ⇄ Ba^+(aq) + F^-(aq)
The concentration of the substance can be obtained from the Ksp as follows;
Ksp = [Ba^2+] [2F^-]^2
Ksp = 4x^3
x = ∛Ksp/4
x = ∛ 1.00 x 10-6/4
x = 6.3 x 10^-3 M
Given that;
mass/molar mass = concentration x volume
molar mass = 175 g/mol
concentration = 6.3 x 10^-3 M
volume = 75.0 ml or 0.075 L
Mass = ?
Mass = concentration x volume x molar mass
Mass = 6.3 x 10^-3 M x 0.075 L x 175 g/mol
Mass = 0.083 g
Learn more about solubility product: https://brainly.com/question/857770
How long is a sunflower seed? Select the best estimate.
15 meters
15 kilometers
15 millilmeters
15 centimeters
Answer:
15 millimeters
Explanation:
the other answer choices are too large.
Answer:
15 millimeters
Explanation:
The other options are too long.
What is the relationship between layering of fluids and density?
Density of a liquid determines how it will layer (heaviest to lightest). If the liquid is least dense it will float to the bottom. Layers will remain separated because each liquid is actually floating on top of the more dense liquid beneath it.
What is the purpose of an indicator in a titration.
Answer:
The role of indicator in titration is to detect the endpoint of the titration. When the colour of the solution changes, it indicates that the concentration of the chemical specie has reached a critical range. This change in colour is possible with the help of indicators.
Explanation:
hope it helps
#carry on learning and keep safe
correct me if I'm wrong and if correct brainliest me please
What is the chemical reaction by which organisms break down food
molecules for energy?
Answer:
cellular respiration
Explanation:
hope this helps :)
brainliest plzzzzzzz
BRAINLIEST TO FIRST RIGHT ANSWER
Students were investigating heat transfer by conduction and they set up the simple experiment you see here. They utilized three spoons made of different materials: the specific heat capacity of each material was recorded in the students' data table. Each spoon was placed in a pot of hot (90°C) water and a pat of butter was placed on the handle of each spoon. The butter melted first on the tin spoon and in about the same amount of time on the plastic and wood spoons. Based on the data table and the experimental results select ALL of the conclusions that are appropriate.
A) Conduction occurred more readily in the tin due to its lower specific heat
capacity
B) Heat transfer via conduction occurred from the hot water to the spoons
and then to the butter,
C) When in contact with hot water, there was no transfer of kinetic energy
through the wood or plastic
D) The atoms in the tin spoon vibrated and collided at a greater rate thon
those in the wood or plastic spoons
E) In all three cases energy s transferred from the faster moving hot water
molecules to the slower moving molecules in the spoon
Answer:
the Answer is A B D
Explanation:
the cunduction in the spoons are equal to all the following answers
Conduction occurred more readily in the tin due to its lower specific heat capacity, Heat transfer via conduction occurred from the hot water to the spoons and then to the butter, The atoms in the tin spoon vibrated and collided at a greater rate thon those in the wood or plastic spoons. Thus option A,B, D are correct.
What is specific heat ?
Specific heat can be measured as the quantity of heat required to increase the temperature of one gram of a substance by one degree Celsius.
The units of specific heat are represented as calories or joules per gram per Celsius degree such as the specific heat of water is 1 calorie per gram per Celsius degree
Specific heat capacity= Heat quantity/ mass × change in temperature.
If Q is the quantity of heat in joules, M is the mass of substance heated,
If ∆O is the change in temperature in Kelvin, Then Q= MC∆O, C is a constant called Specific heat capacity. Therefore, making C the subject of formula:
C= Q /M∆O
Thus option A,B, D are correct.
Learn more about specific heat, here:
https://brainly.com/question/15177263
#SPJ2
Do cells have atoms?
Answer:
Ye? everything is made up of atoms so sure
Part A
What question is being asked through this scientific investigation?
(I didn’t know what subject so sorry, also only answer if u have an answer.)
Answer:
How will the ingredients effect the fermentation of each bottle? What will happen to the bottles and balloons when fermentation occurs?
Explanation:
What are the most of the elements in the periodic table
Answer:
Most of the elements in the periodic table are metals.
Hope that helps. x
Answer:
Here is your answer,mate!
Explanation:
Metals are the most of the elements in the periodic table.
Which subatomic particles have a positive charge and are located in the nucleus?
a. neutrons
b. atoms
c. electrons
d. protons
Answer: protons
Explanation:
a) Neutrons are located in the nucleus but have a negative charge.
b) Atoms are not subatomic particles but are rather made of subatomic particles.
c) Electrons are subatomic particles with a negative charge that are located outside of the nucleus.
d) Protons are subatomic particles that are located in the nucleus and have a positive charge.
Jane made this picture to represent a chemical reaction:
Two circles, one white and the other gray are shown on the left. A small portion of the two circles overlap and the label below the circles is XY. An arrow pointing right is shown on the right of the overlapping circles. There are two circles on the right of the arrow, one white and the other gray, and there is a plus sign between them. The white circle is labeled X and the gray circle is labeled Y.
Which of the following statements best explains the type of chemical reaction represented by Jane's picture? (5 points)
It represents a synthesis reaction because one combined reactant forms multiple products.
It represents a synthesis reaction because the same atoms are present in the reactants and products.
It represents a decomposition reaction because one reactant breaks apart and forms two products.
It represents a decomposition reaction because the total mass of the products is less than the mass of the reactant.
The reaction represents a decomposition reaction because XY is broken into its constituents.
A decomposition reaction is one in which the reactant is broken up into its constituents. In this case, the reactant is XY. The reactant is shown in the left hand side. The reactant is broken up to yield the products. X and Y.
Since the reactant was broken up into the one white and one gray circles labelled X and Y, then the reaction is a decomposition reaction.
Learn more about decomposition: https://brainly.com/question/24936069
Answer:
C if your answers are different!
Explanation:
Question 13 (2 points)
Given the following images, choose the one that most likely represents an M-class star. (2 points)
A
B
с
D
Оа
A
Oь в
Ос
О с с
Od D
Answer:
b. because its Rigel star
Explanation:
hope itsattachments
A 24.81-g sample of a gaseous compound containing only carbon, oxygen, and chlorine is determined to contain 3.01 g C, 4.00 g O, and 17.81
g Cl. What is this compound's percent composition?
Explanation:
getting the empirical formula
For carbon
3.01/12 = 0.2508
For oxygen
4/16 = 0.25
For Cl
17.81/35.5= 0.501
0.2508 ÷ 0.25 = 1.0032
0.25 ÷ 0.25 = 1
0.501 ÷ 0.25 = 2.004
Empirical formula of the compound = CCl20
Molar mass = (1×12) + (2×35.5) + (1×16)
= 12 + 71 + 16
= 99g/mol
percentage composition= 24.81/99 × 100
= 25.06%
A 24.81-g sample of a gaseous compound containing only carbon, oxygen, and chlorine is determined to contain 3.01 g C, 4.00 g O, and 17.81 g Cl. the compound's percent composition is 25.06%.
What are the application of carbon ?The impure form of carbon is Amorphous which is used for the manufacture of car batteries and dry cells, ink and paints; So the majority element of carbon is present in charcoal, so these are used as fuel.
Graphite is derivative form of carbon used as a lubricant in heavy industrial machinery, making pencil leads, these carbon are used in the production of steel.
The empirical formula, For carbon 3.01/12 = 0.2508
For oxygen 4/16 = 0.25, For Cl 17.81/35.5= 0.501, 0.2508 ÷ 0.25 = 1.0032
0.25 ÷ 0.25 = 1
0.501 ÷ 0.25 = 2.004
Empirical formula of the compound = CCl20
Then the Molar mass = (1×12) + (2×35.5) + (1×16)
= 12 + 71 + 16
= 99g/mol
percentage composition= 24.81/99 × 100
= 25.06%
Learn more about carbon, here:
https://brainly.com/question/3049557
#SPJ6
the method of mass production that developed during the nineteenth century was a process that
Answer:
Relied on the use of power driven machinery
Explanation:
Its because the machines would increase the mass productivity of goods
a. Write thepossible isomers of C4 HgBr4
The four isomers of C4H9OH are
As refer to IMAGE 01- Butan−1−ol
As refer to IMAGE 02- Butan−2−ol
As refer to IMAGE 03- 2−methylpropan−2−ol
As refer to IMAGE 04- 2−methylpropan−1−ol
solution
https://www.toppr.com/ask/en-gb/question/write-down-all-isomers-of-c4-h9oh/
any process that results in the formation of an ion
The energy required to cause a gaseous atom or ion to release a electron is what?
Answer:
Ionization is the process by which ions are formed by gain or loss of an electron from an atom or molecule.
21. Which of the following is the best way to clean up an acid spill?
A. Wash down the acid spill with plenty of water.
B. Wipe up the acid spill with paper towel.
C. Spread sawdust on the acid spill to absorb it.
D. Neutralize the acid spill with a base; then wash it with plenty of water.
T1
How does an introduced species affect an ecosystem? Give 2 examples of positive ways
and 2 examples of negative ways.
Answer:
1+ it can help create balance among the ecosystem, particularly by controlling invasive species
2+ can help restore native ecosystems on degraded land
1- can become an invasive species
2- can cause an imbalance among native species
Explanation:
Which substances will make a salt when combined?
Vinegar and tea
Soda and wine
Soda and ammonia
Fertilizer and detergent
Answer:
Soda and wine is the answer to your question.
Explanation:
yo make salt you need a base and an acid. in this case the base is soda and the wine is acid. hope that helps :)
what is the formula of trinitrogen tetrabromide
The formula of trinitrogen tetrabromide is N3Br4
How to determine the molecular formulaTrinitrogen features three molecules of nitrogen, N3
Tetrabromide features four molecules of bromide = Br4
Thus, the formula of trinitrogen tetrabromide is N3Br4
Learn more about molecular formula here:
https://brainly.com/question/17405634
#SPJ1
(1) What is the history of renewable energy in the United States?
(2)What are the advantages and
disadvantages of renewable energy?
(3)What can you do to help forsee a sustainable energy future
in the United States?
You must address all of these
questions in a minimum 2 paragraphs.
Answer:
Historically, wood was the main source of U.S. energy until the mid-1800s and was the only commercial-scale renewable source of energy in the United States until the first hydropower plants began producing electricity in the 1880s.
The Advantages of Renewable Energy Resources-A Fuel Supply That Never Runs Out.Zero Carbon Emissions.Cleaner Air and Water.Disadvantages of Renewable Energy-he Electricity Generation Capacity is Still Not Large Enough.Renewable Energy Can be Unreliable.
First, we need to take advantage of the world's abundant natural gas resources and reduce coal consumption;
Second, governments must support development of carbon capture and storage technology to make fossil fuel use cleaner;
Explanation:
why do the noble gases have relatively low electron affinities?
Answer:
Because noble gases have a full octet, their ionization energies are actually quite high. Electron affinity is the amount of energy released when an electron is added to a neutral atom. Because noble gases have stable electron configurations, they have very low electron affinities.
Explanation:
Answer:
Noble gases have a stable outer shell
Explanation:
Choose all of the examples that show a chemical change.
A) A woodpecker digs in the bark.
B) A dead tree rots on the ground.
C) A forest fire burns a lot of trees.
D) A farmer is cutting logs with an axe.
E) A tree drops rainwater from its leaves.
Answer:
B and C
Explanation:
Answer:
B) A dead tree rots on the ground.
C) A forest fire burns a lot of trees.
Explanation:
It cannot return the the state it was in before or have the same composition it had before.
Identify the subatomic particles in strontium-82 and rubidium-82. Then, explain what type of nuclear decay is most likely to convert strontium-82 to rubidium-82.
We can convert strontium-82 to rubidium-82 by positron emission.
The three main fundamental subatomic particles in an atom are;
ProtonsNeutronsElectronsIn a neutral atom, the number of protons is always equal to the number of electrons.
In strontium-82, there are 44 neutrons, 38 electrons and 38 protons. In rubidium-82, there are 45 neutrons, 37 electrons and 37 protons. We can convert strontium-82 to rubidium-82 by positron emission.
Learn more about positron emission: https://brainly.com/question/11594309
The reactant side of a balanced chemical equation is shown below,
PC15 + 4H20 →
How many hydrogen atoms should there be on the product side in the equation? (5 points)
8
6
4
2
Answer:
do u still need the answer..
Explanation: