under standard conditions, what is the pressure of the carbon dioxide and the ph of the water? at 1 atm

Among the following, the most probable questions that could ask to the farming community are options 1 and 4. These questions addresses the issue and advantages of a crop field.

Farming is way of growing plant or animal varieties cultivating for food and sail. Better planning and designing of farm field gives benefits for farmers.

Farmers should aware of each varieties of their crop and its growth conditions and disadvantages also. Hence the probable questions that could ask to a farming community are does this plan take into consideration damage to the crops caused by extreme weather events

And the fourth option also will this plan increase our farming communities access to new varieties of seeds?

To refer more on farming, search here:

https://brainly.com/question/12586721

#SPJ1

The number of protons, electrons, and neutrons are 55 p+ 55 e- 55 n. They are subatomic particles in the element. They can be calculated from the atomic number and the mass number.

Every element has a mass number and an atomic number. The number of protons, electrons, and neutrons can be calculated from the mass number and the atomic number.

If given

How many protons, electrons, and neutrons?

Number of protons

= atomic number

= 55

Number of electrons

= atomic number - ion

= 55 - 0

= 55

Number of neutron

= mass number - atomic number

= 110 - 55

= 55

Hence, the number of protons, electrons, and neutrons are 55 p+ 55 e- 55 n.

Learn more about subatomic particles here:

brainly.com/question/13303285

#SPJ4

The correct numbers of subatomic particles for a neutral atom of helium are C)  Two protons, two neutrons, four electrons

What are subatomic particles ?

Any of the multiple self-contained units of matter or energy that are the building blocks of all matter are considered subatomic particles, also known as elementary particles. They include the heavier constituents of the small but extremely dense atom's nucleus, the positively charged protons and the electrically neutral neutrons, as well as the electrons, the negatively charged, nearly massless particles that still make up the majority of the atom's size. The only known subatomic particles, however, are not these fundamental atomic building blocks.

These particles are frequently referred to as subatomic particles since they are the building blocks of atoms. There are protons, neutrons, and electrons, three types of subatomic particles. Protons and electrons, two of the subatomic particles, each have an electrical charge of one or the other.

To know more about subatomic particle from the link

https://brainly.com/question/16847839

#SPJ1

A concept can help you translate solutions and related data into basic themes is a false statement.

Basic Concepts are those nouns, verbs, and prepositions that let us understand and describe the world. In the context of the home, kindergarten, and school, these ideas are typically learnt as an essential component of the process of language acquisition.

Therefore, note that Action research is the process of carrying out research and turning the results into useful information that practitioners can use to solve issues and boost organizational effectiveness.

Learn more about concept  from

https://brainly.com/question/27064002
#SPJ1

See full question below

A concept can help you translate solutions and related data into basic themes. True or false

The root mean square speed of O₂ gas molecules under the same conditions is 521.04ms⁻²

Kinetic energy is the energy an object has because of its motion

Here given data is

He gas = 6950 j/mol

We have to find root mean square = ?

So the formula is to find root mean square is

Vrms = √RT/m

Vrms = RMS velocity of the gas

T = absolute temprature of the gas

M = molar mass of the gas

R = universal gas constant

So, average molar kinetic energy of gas

E = 1/2 mv²rms = 1/2 RT

This equation reveal that molar KE is independent of the nature of the gas and it only depends on temprature as ideal behavior is concerned and so both He and O₂ will have same KE = 6950 j/mol and under the same condition of temprature

So for O₂

1/2 m O₂ V²rmsO₂ = 6950 j/mol

Taking atomic mass of O₂ = 16g/mol

V²rmsO₂ = 6950 × 2/2×16g/mol

VrmsO₂ = √69500000/16g/mol

VrmsO₂ = 521.04ms⁻²

Root mean square speed of O₂ gas molecules is 521.04ms⁻²

Know more about kinetic energy

https://brainly.com/question/13200809

#SPJ4

The petal of rose has different kinds of pigments like anthocyanins, carotenoids which give them the colors.

What are Anthocyanins?

Anthocyanins are the pigment that produces red color in the roses. They belong to Flavonoids family.

The pigments in a rose's petals give it its color. These pigments mostly consist of carotenoids and anthocyanins. Bright yellow, orange, and red pigments like those in lemons, oranges, and tomatoes are made by carotenoids. They are contained in structures called plastids, which are a component of the cytoplasm of plant cells. They are therefore steady and largely unaffected by the environment or the health of the plant. Deep red, magenta, purple, and blue colors are made of anthocyanins. They are transported via the sap of the plant and are water soluble. They are far less stable and more susceptible to external variables because they are in a fluid environment.

According to research, a bloom's anthocyanin content and sap pH fluctuate as a flower develops from a bud to a bloom. The pH of the sap increases with bloom aging and anthocyanin content decreases. As those who grow hydrangeas are aware, more acidic conditions prefer the pink/red end of the color spectrum while high alkaline levels produce blue colorations. As a result, as your rose bloom ages and its pH rises, the red will tend to lean toward the darker, bluer side of the spectrum. When a flower is in bloom, anthocyanin levels are still high, but they start to drop off swiftly as the blossom fades.

To know more about anthocyanin, click the following link

https://brainly.com/question/15609513

#SPJ9

Initially, the Flack is the flask filled with water and weighed to find may of water + flask Afla that the Flask is empty flack in noted. emptied and mars ofMass of water in the beaker. calculated by is mars of the flask from. subtracting from this volume of a mass of water + flask.

Flask is calculated using the standard density of water at that ten pleasure. If the flask is not a day from outside at that time, the mass of water will be More than the actual. This results. the higher calculated volume of the flask. As Molar mass. M- MRT PV mass of volatile where Mina's liquid.

Analysis of total nitrogen in organic matrices can be performed using the Dumas method. This ensures the complete combustion of the matrix under oxygen. The resulting gas is reduced with copper and dried with CO2 trapped. Next, quantify nitrogen using a universal detector. Use a thin glass flask with a long neck.

Learn more about Flask here:-https://brainly.com/question/19053646

#SPJ4

1s²2s²2p⁷3s²3p⁴ two of the following electronic configurations (in quantum mechanical notation) are not reasonable.

The correct option is B.

Using subshell labels, the electronic structure of an atom is described. These labels include the subshell name, which is determined by the azimuth and elevation quantum number, the shell number, which is determined by the main quantum number, and the total quantity of electrons in the subshell, which is indicated in superscript.

An atom's electron configuration describes how its electrons are dispersed across its orbits (shells) and subshells. An atom's electron configuration is crucial because it aids in predicting a substance's chemical, physiological, electrical, and magnetic characteristics.

To know more about electronic configurations visit:

https://brainly.com/question/13497372

#SPJ4

The original pH of the gastric juice sample is 3.43

pH serves as a measure to calculate the acidity/alkalinity of a solution. It's ranges is between 0 - 14, with 7 being neutral. A pH below 7 indicates acidity and a pH above 7 indicates basicity. pH is actually a measure of the relative amounts of free hydrogen and hydroxyl ions in water.

As we know:

M₁V₁ = M₂V₂

For the given question:

M₁ = Concentration of gastric juice

V₁ = Volume of gastric juice (20 ml)

M₂ =  Concentration of NaOH (0.0011 M)

V₂ = Volume of NaOH (6.7 ml)

So, M₁ = M₂V₂ / V₁

M₁ = 0.0011 × 6.7/20

M₁ = 0.000365

For pH:

pH = -log [H⁺]

pH = -log [0.000365]

pH = 3.43

To know more about pH visit:

https://brainly.com/question/2288405

#SPJ4

The elements that has the quantum numbers shown are;

The quantum number is used to be able to identify the electron in an atom. We know that the orbital is a region in space where electrons could be fond and electrons are identified in the orbitals where they are found by the use of quantum numbers.

Now we have to use the quantum numbers as shown to be able to identify the elements that have them. This is so because the kind of element can be known from the quantum numbers that its electrons posses.

Learn more about quantum numbers:https://brainly.com/question/16977590

#SPJ1

Answer:

31.2 moles of O2

Explanation:

You have to do stoichiometry to convert moles of NaClO4 to moles of O2.

You have 15.6 moles of NaClO4, you need these to cancel out so you use your coefficient from the equation. Since you are trying to find moles of O2 you put your coefficient of oxygen in the numerator. Multiply across the top & divide by the bottom to get 31.2 moles of O2.

[tex]\frac{15.6 mol NaClO4}{1} * \frac{4 mol O2}{2 mol NaClO4}[/tex]

Answer:

1.water  2. air 3.aluminum  4.steel 5.iron  6.silver 7.gold

Explanation:

The density of iron is = 7.86 g/mL

The density of gold is  = 19.3 g/mL

The density of steel  is = 7.8 g/mL

The density of water is  = 1.00 g/mL

The density of air  is = 1.29 g/mL

The density of silver is = 10.5 g/mL

The density of aluminium is  = 2.70 g/mL

so..

water < air < aluminum < steel < iron < silver < gold

This is an example of positive feedback regulation.

A change in a particular direction causes an additional change in the same direction. For example, if the concentration of a substance increases, a feedback of continuously increasing concentration will occur.

A positive feedback loop occurs in nature when a product of a reaction leads to an increase in that reaction. Considering a system in homeostasis, a positive feedback loop pushes the system away from the goal of equilibrium.

Example of Positive Feedback Loops

The feedback loop possess two major forms: (1) positive feedback and (2) negative feedback. They work simultaneously to maintain body equilibrium under different conditions.

To know more about positive feedback regulation visit:

https://brainly.com/question/14451901

#SPJ4

The mass of hydrogen necessary to react with 50.0g of nitrogen in the reaction of ammonia is 10.8g.

What is ammonia?

Ammonia is a colorless gas which when dissolved in water readily gives ammonium hydroxide which causes irritation. It can also be used as cleaning agent also it is a pungent gas composed of hydrogen and nitrogen.

According to the given equation of ammonia formation,

N2 + 3H2 -------> 2NH3

there is 1 mole of nitrogen reacting with 3 moles of hydrogen to give 2 moles of ammonia. In terms of mass, 28.01g of nitrogen needs 3 moles of hydrogen that is 6.048g of hydrogen.

We can say that,

28.01g of N2 requires 6.048g of hydrogen,

1g of N2 requires = 6.048 / 28.01 = 0.048g

50g of N2 requires = 0.048 x 50.0 = 10.8g of H2.

Therefore, 10.8g of H2 is required to react with 50.0 g of N2 to make ammonia.

To learn more about ammonia click on the given link https://brainly.com/question/14445062

#SPJ9

Answer:

its a

Explanation:

10.8 g H2

Potassium is the element that has the ground state electronic configuration, 1s22s22p63s23p64s1.

The electronic configuration describes the distribution of electrons in their atomic orbital. In an electronic Configuration, subshells that contain electrons, and the total number of electrons in each of the subshells are written in a sequence.

It is used to find out the valency of an element, Predict the properties of a group of elements and Interpret atomic spectra.

The subshells are s, p, d, and f and the total number of electrons that they can hold is 2, 6, 10, and 14 respectively.

If you need to learn more about electronic configuration, click here

https://brainly.com/question/2554526?referrer=searchResults

#SPJ4

the mole fraction of the total ions in an aqueous solution prepared by dissolving 0.400 moles of caf2 in 850.0 g of water. is 0.00840 moles

The calculation of the mole fraction is as follow:

As we know that

Molar mass = Number of grams ÷ number of moles

Or

number of moles = Number of grams ÷ molar mass

from the question

Number of moles of CaI2 = 0.400

And, Molar mass of water = 18.0 g/mol

Now we can calculate  the  moles of water is

= 850.0 g ÷ 18.0 g/mol

= 47.22 mol

And, Total number of moles is

= 0.400 + 47.22

= 47.62

So, Mole fraction of CaI2 is

= 0.400 ÷ 47.62

= 0.00840 mole

hence, the mole fraction of the total ions in an aqueous solution prepared by dissolving 0.400 moles of caf2 in 850.0 g of water. is 0.00840 moles

learn more about mole fraction at https://brainly.com/question/2060778

#SPJ4

Answer:

2Li3PO4(aq) + 3Ca(C2H3O2)2(aq)

- - - > Ca2(PO4)2(s) + 6LiC2H3O2(aq)

The net ionic equation for the reaction that occurs NO2-  + H3O+ = HNO2 + H2O

If HCl is added, then it reacts with the conjugate base of HNO2 means NaNO2.

The ionic equation via breaking all the soluble ionic compounds (the ones marked with an (aq)) into their respective ions. every ion has to be shown with its price and an (aq) to reveal that its miles are present inside the answer. Use coefficients to reveal the variety of every ion present.

A molecular equation is an equation wherein the formulation of the compounds is written as though all materials exist as molecules. An ionic equation is one wherein dissolved ionic compounds are proven as loose ions. Examples of molecular and ionic equations are proven.

Ionic equations and internet ionic equations are usually written most effectively for reactions that arise in answer and strive to show how the ions present are reacting.

If NaOH is added then it must react with the weak acid HNO2.

Thus, the net reaction contains NaNO2.

NaNO2 + HCl =  HNO2 + NaCl

The ionic equation will be:

NO2-  + H3O+ = HNO2 + H2O

(because it is given to use H3O+ instead of H+)

Learn more about ionic equations here:-https://brainly.com/question/13879496

#SPJ4

HCl can be added to separate benzylamine from the toluene mixture.

A widely used method of separating two liquids from each other or popularly called liquid-liquid extraction is being implemented here.

The knowledge of pH values helps in treating the contents of the solution that is to be extracted and their subsequent isolation as well Here, the concept of acid-base extraction is applied to understand that the separation of benzylamine which is an organic base can be done by extracting it by adding HCl to the solution. The addition of hydrochloric acid leads to the formation of a corresponding ammonium salt, the amine can be later recovered by adding a base thereby converting the formed compound back to benzylamine.

To learn more about acid-base extractions visit:

https://brainly.com/question/15061850

#SPJ4

If a gas had an initial temperature od 20.65 C and a final temperature of 41.77 C, its initial volume would be 7.979.

The volume of any solid in three dimensions is equal to the area it occupy. These solids include shapes like a cube, cuboid, conical, cylinder, and sphere. The form affects how much volume there is.

The space occupied by the gaseous particles under typical pressure and temperature circumstances is referred to as the volume of gas. It has the symbol "V." The symbol for volume in the SI is "liters," or "L". When the gas is at normal temperature, a mole has a volume of 24 m3, or 24 000 cm3. The molar volume of a gas is this quantity.

To know more about volume visit:

https://brainly.com/question/24086520

#SPJ13

According to the given statement 1.96 L  is the new volume assuming temperature is constant.

An volume of a gas is just one where there were no intermolecular attraction forces and all collisions involving atoms or molecules are entirely elastic. It can be seen as a group of perfectly spherical particles that collide but do not otherwise interact with one another.

Initial pressure (P₁): 0.98 atm

Initial volume (V₁): 1.0 L

Final pressure (P₂): 0.50 atm

Final volume (V₂): ?

Boyle's law provides an expression for this for an ideal gas that experiences an isothermal change.

P₁×V₁ = P₂×V₂

V₂ = P₁×V₁ / P₂

V₂ = 0.98 atm * 1.0 l / 0.50 atm

V₂ = 1.96 L

To know more about Ideal gas visit:

https://brainly.com/question/28257995

#SPJ4

The summary of the paragraph is that if you live on a high latitude there would be greater seasonal variation.

The equator is said to be that imaginary line that does divide the earth into the Northern and the southern Hemispheres. This implies that the equator is the line that divides the earth into to halves and the two haves of the earth are responsible for the variations in many things on earth such as the day and night experience.

We can see from the passage that if you are living in a position that is closer to the equator then it follows that the variation of day and night would have less difference as well as less of seasonal differences.

Learn more about equator:https://brainly.com/question/10822895

#SPJ1

The idea that younger rock layers are deposited on top of older rock layers in an undisturbed section of sedimentary rock can best be explained by the principle of superposition.

Principle of superposition is the major principle of geography. The oldest layer of the rock is consider as a base rock. after the oldest layer the layered formed are in ascending order of younger layer. so, from this principle we can younger and older one.

Thus, The idea that younger rock layers are deposited on top of older rock layers in an undisturbed section of sedimentary rock can best be explained by the principle of superposition.

To learn more about principle of superposition here

https://brainly.com/question/2699638

#SPJ1

It  is true about free radicals. a. they are unstable and highly reactive molecules.

Hydrogen peroxide and hydroxyl ions are two examples of oxygen-containing molecules with an unbalanced number of electrons. The unequal distribution of electrons makes it simple for them to interact with other molecules. To combat free radicals, use antioxidants. Heart disease and cancer are caused by free radicals. an unstable molecule type produced by typical cell metabolism The physiological metabolism produces some of these reactive molecule species (RMS), also known as "Hydrogen peroxide and hydroxyl ions are two examples of oxygen-containing molecules with an unbalanced number of electrons. The unequal distribution of electrons makes it simple for them to interact with other molecules. To combat free radicals, use antioxidants. Heart disease and cancer are caused by free radicals. an unstable molecule type produced by typical cell metabolism The physiological metabolism produces some of these reactive molecules species (RMS), also known as "free radicals" or "oxidants." Cell compartments and cells are hurt or destroyed when RMS concentrations go above a certain free radicals" or "oxidants." Cell compartments and cells are hurt or destroyed when RMS concentrations go above a certain point. These reactive molecules species (RMS), also known as "free radicals" or "oxidants," are a by-product of some physiological processes.

Learn more about free radicals here:

https://brainly.com/question/11631123

#SPJ4

The mass number is always the number of protons and neutrons together

Ex: 1 protons and 3 neutrons

Mass number: 4

Atomic number (number of protons): 1

Answer:

mass= volume x density

Explanation:

weight is the measure gravitational force acting on a mass

The volume (in ml) would we expect to use for our third trial with 2.0453 g of KHP will be 33.0 ml

Molarity of NaOH = 0.30 molar

Mass of KHP = 2.0353 G

Molar mass of KHP = 204.2 g/mol

Volume of NaOH = ?

First we will find out the number moles of KHP

number of moles = mass / molar mass

number of moles of KHP = 2.0453 g / 204.2 g/mol

number of moles of KHP = 0.010 mol

Now we will find out the volume of NaOH

volume = number of moles / molarity

volume of NaOH = 0.010 mol / 0.30 M

volume of NaOH = 0.033 L

Conver L to ml

volume of NaOH = 0.33 L * 1000

volume of NaOH = 33.0 ml

You can also learn about molarity from the following question:

https://brainly.com/question/8732513

#SPJ4

The solubility product of the copper(II) iodate is 1.25 * 10^-7

The term solubility has to do with the amount of a substance that is dissolved in water. The solubility product is the equilibrium constant that shows the extent to which a substance is dissolved in water.

We have to convert the solubility of the  copper(II) iodate from g/mL to molarity and we have;

Number of moles = 0.13 g/413 g/mol = 3.15 * 10^-4 moles

Volume of the solution = 100 mL or 0.1 L

Molarity =  3.15 * 10^-4 moles/0.1 L

= 3.15 * 10^-3 M

We now have;

Ksp = [x] [2x]^2

Ksp = 4x^3

Ksp = 4( 3.15 * 10^-3 )^3

Ksp = 1.25 * 10^-7

Learn more about solubility:https://brainly.com/question/28170449

#SPJ1