) Water flows through the system shown below. Estimate the volumetric flow rate if friction
losses are negligible.

) Water Flows Through The System Shown Below. Estimate The Volumetric Flow Rate If Frictionlosses Are

Answers

Answer 1

The volumetric flow rate if friction is negligible = 0.00197 m³/sec

Given data :

P₁ = 7 atm  =  709.275 kPa

P₂ = 1.5 atm = 151.988 kPa

d₁  = 0.74 cm = 0.0074 m

d₂ = 1.20 cm  = 0.0120 m

h = 82 m

density of water ( p ) = 1000 kJ/m³

Estimate the volumetric flow rate

given that friction losses are negligible

V₁² - V₂² = [tex]\frac{2(P_{2} - P_{1}) }{p} + 2g(h )[/tex]

             = 2( 151.988 - 709.275 )  + 2 * 9.81 * 82

             = 2 ( - 557.287 ) + 1608.84

             = - 1114.574 + 1608.84  =  494.266

V₁² - V₂² =  494.266 ----- ( 1 )

Also given that:

volumetric flow rate ( Q ) = A₁V₁ = A₂V₂

                                          = π / 4 ( 0.0074 )² * V₁   =   π / 4 ( 0.0120 )² * V₂

                                          = 0.000043 V₁ = 0.000113 V₂

∴ V₁ = 2.63 V₂

Back to equation ( 1 )

( 2.63 v₂ )² - V₂² = 494.266

V₂² = ( 494.266 ) / 1.63

∴ V₂ = √303.23 = 17.41  m/sec

Therefore the volumetric flow rate ( Q )

Q = A₂V₂

   =  π / 4  * ( 0.0120 )² * 17.41

   = 0.00197 m³/sec

Learn more about volumetric flow rate : https://brainly.com/question/24356835


Related Questions


17. The shape of a river is determined by which of the following? (Choose all that
apply)
A Erosion
B. Deposition
C. Weathering
D. water speed

Answers

Answer:

Water speed Plays a key role In determining The shape of it

A 1500 kg car has the same momentum as a 2500 kg truck moving at 25 m/s. How fast is the car moving in m/s

Answers

Answer:

41.6m/s

Explanation:

P=mv

2500kg × 25m/s = 62500kgm/s

62500kgm/s ÷ 1500 kg = 41.6m/s

a
A soccer player kicks a ball horizontally and it travels 150 m. The ball was kicked off of a cliff that was 75 m
high. What speed was the ball kicked at?

Answers

The ball was kicked with a speed of 38.4 m/s.

Using s = ut + 1/2gt², we find the time it takes the ball to reach the ground. Where

s = height of cliff = 75 mu = initial vertical velocity of ball = 0 m/s(since it is kicked horizontally)g = acceleration due to gravity = 9.8 m/s²t = time taken for ball to reach the ground.

Substituting the values of the variables into the equation, we have

s = ut + 1/2gt²

75 m = (0 m/s)t + 1/2 × 9.8 m/s² × t²

75 m = 0 m + (4.9 m/s²) t²

75 m = (4.9 m/s²)t²

Dividing both sides by 4.9, we have

t² = 75 m/4.9 m/s²

t² = 15.306 s²

Taking square-root of both sides, we have

t = √15.306 s²

t = 3.91 s

The horizontal distance covered by the ball d = vt where

v = horizontal speed of ball and, t = time taken for the ball to reach the ground.

Since we require v, we make it subject of the formula.

So, v = d/t

Given that d = 150 m and t = 3.91 s, substituting these into v, we have

v = d/t

v = 150 m/3.91 s

v = 38.4 m/s

So, the ball was kicked with a speed of 38.4 m/s.

Learn more about motion under gravity here:

https://brainly.com/question/25271752

A 4.0 ohm resistor has a current of 3.0 A for 5.0 min. How many electrons pass through the resistor during this time interval?

a. 7.5 x 10^21
b. 3.8 x 10^21
c. 8.4 x 10^21
d. 2.1 x 10^21
e. 5.6 x 10^21

Answers

Answer:

e. 5.6 x 10^21 electrons.

Explanation:

In order to calculate the charge Q passing through the resistor for in a definite amount of time is

[tex]Q \ (\mathrm{coulombs}) \ = \ I \ (\mathrm{amperes}) \ \times \ t \ (\mathrm{seconds}) \\ \\ \-\hspace{2.22cm} = \ 3.0 \ \mathrm{A} \ \times \ 5.0 \ \mathrm{min} \ \times \ \displaystyle\frac{60 \ \mathrm{sec}}{1 \ \mathrm{min}} \\ \\ \-\hspace{2.22cm} = \ 900 \ \mathrm{C}[/tex]

Thus, using the law of quantization of electric charge, the number of electrons passing through the resistor during this time interval can be calculated.

[tex]Q \ = \ n \times e \\ \\ n \-\hspace{0.18cm} = \ \displaystyle\frac{Q}{e} \\ \\ n \-\hspace{0.18cm} = \displaystyle\frac{900 \ \mathrm{C}}{1.6 \times 10^{-19} \ \mathrm{C}} \\ \\ n \-\hspace{0.18cm} = 5.6 \times 10^{21} \ \ \mathrm{electrons}[/tex], where n denotes the number of electrons and e is the unit charge of an electron ([tex]1.6 \times 10^{-19} \ \mathrm{C}[/tex]).

a 2000kg car initially traveling at a speed of 15 m/s is accelerated by a constant force of 10000 n for 3 seconds. the new speed of the car is

Answers

Mass of the car (m) = 2000 KgInitial velocity (u) = 15 m/sForce (F) = 10000 NTime (t) = 3 sLet the acceleration be a.By using the formula, F = ma, we get,10000 N = 2000 Kg × aor, a = 10000 N ÷ 2000 Kgor, a = 5 m/s^2Let the final velocity be v.By using the formula, v = u + at, we get,v = 15 m/s + 5 m/s^2 × 3 sor, v = 15 m/s + 15 m/sor, v = 30 m/s

Answer:

The new speed of the car is 30 m/s.

Hope you could get an idea from here.

Doubt clarification - use comment section.

True or False. When Isaac’s father was a 100 God changed his name from Abram to Abraham.

Answers

I believe this is false

The degree of coldness or hotness is different for different objects. Explain with an example

Answers

Answer:

Explanation:

The degree of hotness and coldness of air is known as temperature and is measured with a thermometer in degrees-Fahrenheit or degrees-Celsius. Mercury is the only one in the liquid state at room temperature. It is used in thermometers because it has a high coefficient of expansion. The flow of heat will be always from higher to lower temperature.

PLS MARK ME WITH BRAINLEST

please answer it I will mark it brainliest​

Answers

Explanation:

1) If you spot something you think might be hazardous in your workplace, report it to your employer and safety rep straight away. Your employer should then decide what harm the hazard could cause and take action to eliminate, prevent or reduce that harm. Read more about risk assessments .

2) Complex hazards are understood as various combinations of sources of hazards that lead to the accident occurrences. ... The term "natural-technological" applies to both human-induced intensification of natural risks and any accidents in the technosphere triggered by natural processes or phenomena.

3)Risk Evaluation : To determine who may be harmed. Risk Control : Taking preventive measures to control the impact of risk.

In general, to do an assessment, you should:

Identify hazards.

Determine the likelihood of harm, such as an injury or illness occurring, and its severity. ...

Identify actions necessary to eliminate the hazard, or control the risk using the hierarchy of risk control methods.

A hazard is something that can cause harm, e.g. electricity, chemicals, working up a ladder, noise, a keyboard, a bully at work, stress, etc. A risk is the chance, high or low, that any hazard will actually cause somebody harm.



Risk Identification : It is a process of characterizing hazards. Risk Analysis : A process of determining the impact of risk. Risk Evaluation : To determine who may be harmed.

Identify the types of motion:-
the movement of the snail on the ground
the strings of the guitar
the whirling of stone tied with a thread

Answers

Answer:

the movement of snail on the ground is in random motion.

the strings of the guitar is in oscillatory motion.

the whirling of stone tied with a thread is in circular motion.

A rifle is aimed horizontally at a target 47 m away. The bullet hits the target 2.3 cm below the aim point.

Answers

Answer:

Is your question asking for the muzzle velocity of the bullet?

Explanation:

I will assume it does

The bullet travels horizontally to the target in the same amount of time it falls 2.3 cm from vertical rest

s = ½at²

t = √(2s/g) = √(2(0.023) / 9.8) = 0.0685118...s

v = d/t = 47/0.0685118 = 686.01242...

v = 690 m/s

What is force? And tell it's unit

Answers

Answer:

force is simply a push or a pull in a particular direction. The unit is N (newton)

Explanation:

hope this helped

Answer:

In physics force is an influence which changes the motion of an object which has mass

Its unit is N or kgms/2

Write down the condition required for the thermonuclear fusion.​

Answers

Answer:

The main condition necessary for a controlled thermonuclear fusion:

The ions must be held together in close proximity at high temperature with a confinement time long enough to avoid cooling.

At liftoff, the space shuttle Discovery has a constant acceleration of 16.4 ft/s/s with an initial velocity of 1,341 ft/s due to the rotation of the Earth. How long does it take to travel 100,000 ft?

Answers

From orbital speed formula which is the ratio of the circumference of the earth and the period of time, it will take 6097.6 seconds to travel 100,000 ft

Given that the space shuttle Discovery has a constant acceleration of 16.4 ft/s with an initial velocity of 1,341 ft/s due to the rotation of the Earth.

The period of time T it will require to travel round the a distance 100,000 ft can be calculated by using the formula below.

V = 2πr / T

Where 2πr = 100,000 ft

V = 16.4 ft/s

Substitute both in the formula above.

16.4 = 100000 / T

T = 100000 / 16.4

T = 6097.6 seconds

Therefore, it will take 6097.6 seconds to travel 100,000 ft

Learn more about orbital speed here: https://brainly.com/question/855117

The motor in a hairdryer is attached to a 3V battery. A current of 0.8A flows through the motor for 3 minutes. Calculate the total charge in this time.

Answers

The total charge in this time is equal to 144 Coulomb.

Given the following data:

Voltage = 3 VoltsCurrent = 0.8 AmperesTime = 3 minutes.

To calculate the total charge in this time:

First of all, we would convert the value of time in minutes to seconds.

Conversion:

1 minute = 60 seconds

3 minutes = 180 seconds

Formula for quantity of charge.

Mathematically, the quantity of charge is given by this formula:

[tex]Q=It[/tex]

Where:

Q is the quantity of charge.I is the current.t is the time measured in seconds.

Substituting the given parameters into the formula, we have;

[tex]Q = 0.8 \times 180[/tex]

Quantity of charge, Q = 144 Coulomb.

Read more on charges here: https://brainly.com/question/4313738

Answer:

960 watts

Explanation:

What are the symmetry operations of molecule AB4, where the molecule b lies at the center of the square and A lies at the center of the square and is not coplaner with B atoms. How to find the multiplication table

Answers

The symmetry operations of molecule AB₄ is tetrahedral  and they are :

E : Identity4C₃ : axis of rotation 3C₂ : axis of rotation3S₄ : Rotation-reflection axis 6бd  

To find the multiplication table we have to apply the multiplication table for Td symmetry ( attached below )

Given that molecule B lies at the corners of the square and molecule A lie at the center and is not coplanar with molecule B the symmetry operations of the molecules AB₄ will belong to a tetrahedral symmetry group which contains :

E : Identity4C₃ : axis of rotation 3C₂ : axis of rotation3S₄ : Rotation-reflection axis 6бd

Learn more about tetrahedral symmetry group : https://brainly.com/question/1968705

Which of the following changes would decrease the force between two charged particles by a factor of 9? A. Decreasing the distance between the particles by a factor of 3 B. Increasing the distance between the particles by a factor of 3 C. Increasing the amount of charge on each particle by a factor of 9 D. Decreasing the amount of charge on one of the particles by a factor of 3​

Answers

Option B is correct.Increasing the distance between the particles by a factor of 3 decrease the force between two charged particles by a factor of 9.

What is electric force?

The electric force between the two charges is directly proportional to the product of the charge and inversely proportional to the square of the distance between them.

The electric force is found as;

[tex]\rm F = \frac{K q_1q_2}{r^2}[/tex]

The electric force between the two charges is directly proportional to the product of the charge.

The electric force is inversely proportional to the square of the distance between them.

Increasing the distance between the particles by a factor of 3 decreases the force between two charged particles by a factor of 9

Hence, option B is correct.

To learn more about the electric force, refer to the link;

https://brainly.com/question/1076352

#SPJ2

Assume each trial ( roll of cubes) represents 1000 years. Imagine that you found a rock sample was 25% Lokium and 75% DOL, how would the rock sample be given the half-life you figured out? Show your work

Answers

Assuming each trial represents 1000years, and rock samples were found, the rock sample will be given half-life of

The rock sample will be [tex]2000years[/tex] old

Isotope

We know that the parent Isotope remaining is given by the expression

[tex]\frac{1}{2}^n[/tex]

where,

n = number of half lives passed

lokium Isotope

From the question, the parent Isotope remaining is [tex]25\%[/tex] lokium

[tex]0.25 = \frac{1}{4} = \frac{1}{2^2} = \frac{1}{2}^2[/tex]

Therefore,

[tex]\frac{1}{2}^2[/tex] means 2 half lives have passed.

If from the question,

1 half life = 1000years

Rock age

Therefore,

The rock sample's age = [tex]2*1000 = 2000years[/tex]

For more information on rock samples such as lokium and DOL , visit

https://brainly.com/subject/chemistry

In what way does Isaac represent us?

Answers

Answer:

I believe The Knowledge that we apply everyday or based on these methods and discoveries may represent us

Explanation:

What is the significance of Isaac's name?

Answers

Answer:

ghgivjgifigo ra together aigig disgust u hoodie

A block of mass m=10 kg at rest slides down a rough incline plane of θ=30° and length l=5 m. The coefficient of kinetic friction between the block and the incline is μ_k=0.1. At the bottom of the plane the block continues to slide on a frictionless surface and hits a spring with spring constant k=100 N/m.

Answers

The speed of the block at point B = 6.36 m/s

Given data :

Mass ( m ) = 10 kg

Angle of inclination ( θ ) = 30°

Length of incline = 5 m

Determine the speed of the block at a point B on the incline

First step : Calculate the work done by frictional force

given that there is no friction on the horizontal plane. Vinclined = Vhorizontal

∴ Work done by frictional force ( Wf ) = F * L cos 180

                                                              = - ( μ_k * N ) L

                                                              = - (0.1 * 84.86   ) * 5  = - 42.4 Joule

where N = mg cos 30°

              = 10 * 9.8 * 0.866 = 84.86

Next step : Calculate the speed of the block at point B

applying work energy theorem

Wf = ΔK.E + ΔP.E

     = ( 1/2 mv² - 0 ) + ( 0 - mgh )

∴ - 42.48  = 1/2 mv² - mgh

1/2 mv² = mgh - 42.48

            = 10 * 9.8 * 5 sin 30° - 42.4

       v²  = 40.52

V ( speed of the block at point B ) = 6.36 m/s

Hence we can conclude that the speed of the block at point B = 6.36 m/s

Learn more about speed on frictionless surface : https://brainly.com/question/9968388

Attached below is the complete question related to your question

imagine that you have an electric car and all of the recaptured energy is put back into the battery that powers your car what speed could your car cheat from rest by using only the recaptured energy from part B

Answers

Answer:

Moving vehicles have a lot of kinetic energy, and when brakes are applied to slow a vehicle, all of that kinetic energy has to go somewhere.

Explanation:

Hey guys can you help me with this problem it's giving me a headache. "If 2500 kg roller coaster car begins its descent from 500m above above the first hill. What is its kinetic energy at the bottom of the hill."

Answers

The kinetic energy of the roller coaster at the bottom of the hill is 12250000 J

To answer this question, we must understand that the energy of a system is always conserved as explained by the law of conservation of energy.

The kinetic energy of the roller coaster will be equivalent to the potential energy of the roller coaster.

The kinetic energy of the roller coaster can be obtained as follow:

Mass (m) = 2500 KgHeight (h) = 500 mAcceleration due to gravity (g) = 9.8 m/s²Kinetic energy (KE) =?

Kinetic energy = Potential energy

KE = mgh

KE = 2500 × 9.8 × 500

KE = 12250000 J

Therefore, the kinetic energy of the roller coaster is 12250000 J

Learn more about kinetic energy: https://brainly.com/question/14449170

PLEASE ASP HELP THIS WILL GIVE 50 POINT AND BRAINLIEST!!!!!!
In introductory physics, a typical cavendish balance for measuring the gravitational constant G use metal masses 2.39kg and 16g whose center are separated by 6.81cm calculate the gravitation force between these forces, treating each as a point mass located at the center of the sphere.

gravitational constant =6.67259 × 10⁻¹¹N·m²/kg²

Answers

Answer:

Explanation:

F = GMm/d²

F = 6.67259 x 10⁻¹¹(2.39)(0.016) / 0.0681²

F = 5.5019685...x 10⁻¹⁰ N

round as appropriate, probably no more than 3 significant figures.

Value of G seems low, but well within the 3 significant figures of the other numerals. I typically see G = 6.674 x 10⁻¹¹

The force as a function of displacement of a moving object is presented by the graph. How much work is done when the object moves from 5 m to 8 m? *

Answers

Answer:

Explanation:

Work is the area under the curve between the limits

W = ½(5)(8 - 5) = 7.5 J

The work done when an object moves from 5 m to 8 m is 7.5 J.

Work done

The work done in moving an object from one point to another is equal to the product of force and displacement of the object.

W = Fs

Area under a curve

The work done on an object is equal to area under the curve

The area between point 5 m and 8 m = ¹/₂ x (8 - 5) x 5 = 7.5 J

Thus, the work done when an object moves from 5 m to 8 m is 7.5 J.

Learn more about work done here: https://brainly.com/question/8119756

state all kinds of errors ​

Answers

Answer:

Instrumental error

Environmental error

Observational error

Theoritical error

Find the magnitude of the potential difference between two points located 1.2 m apart in a uniform 700 N/C electric field, if a line between the points is parallel to the field. Express your answer in volts.

Answers

The magnitude of the potential difference between the two points is 840 V

To solve the problem above, we need to use the formula of Potential difference as related to distance and electric field.

Potential difference: This can be defined as the work required to move a unit charge from a point to another in an electric field.

⇒ Formula:

 V = E×d.................. Equation 1

⇒ Where:

V = Potential differenceE = Electric Fieldd = Distance

From the question,

⇒ Given:

E = 700 N/Cd = 1.2 m

⇒ Substitute these values into equation 1

V = 700(1.2)V = 840 V

Hence, The magnitude of the potential difference between the two points is 840 V

Learn more about Electric Field here: https://brainly.com/question/11509296

American Football originated from which two sports?

A) Soccer and Rugby


B) Rugby and Basketball


C) Cricket and Soccer


D) Soccer and Volleyball

Answers

Answer:

b rugby and basketball

Explanation:

basket ball was made by a white man

American Football originated from Soccer and Rugby. Hence, option (A) is correct.

What is American Football?

American football, sometimes known as gridiron, is a team sport played by two teams of eleven players on a rectangular field with goalposts at each end. It is known simply as football in the United States and Canada. The defense, the team without the ball, seeks to halt the offense's movement and seize control of the ball for themselves.

The offence, the team in possession of the oval-shaped football, attempts to advance down the field by running with the ball or throwing it. The offence is awarded a new set of four downs to resume the drive if they successfully gain at least 10 yards in four downs or plays. If they fail, they forfeit the ball to the defense.

Learn more about Football here:

https://brainly.com/question/15504525

#SPJ2

You are pulling a sled with a constant velocity using a rope held horizontally in
the snow. Using a spring scale attached to the rope, you measure the tension
to be 0.96 N. The sled's mass is 0.58 kg. Write the surface force the ground
exerts on the sled in component form, and determine its magnitude.

Answers

Answer:

Explanation:

if you are pulling in the positive direction and Upward is also positive.

F = -0.96i + 0.58(9.8)j

F = -0.96i + 5.7j

F = √(-0.96² + 5.7²) = 5.8 N

You are pulling a sled with constant velocity by using a rope then the surface force the ground exerts on the sled will be 5.8 N.

What is tension?

The pulling force conveyed axially by a string, cable, chain, or another analogous object, or by either end of a rod, truss member, or another such three-dimensional object, is referred to as tension in physics. Another way to think of tension is as the action-reaction pair of forces acting at each end of the previous elements. Perhaps tension is the polar opposite of compression.

A restoring force may cause what is also referred to as tension when atoms or molecules are torn apart from one another at the atomic level and build up potential energy.

If you are moving upward and pushing in a positive way,

F = -0.96 i + 0.58(9.8) j

F = -0.96 i + 5.7 j

F = [tex]\sqrt{(-0.96^2 + 5.7^2)}[/tex]

F= 5.8 N

To get more information about Tension :

https://brainly.com/question/15880959

#SPJ5

For a wave, the _____ the amplitude, the _____ energy the wave carries.
Multiple choice question.

A)
larger, more

B)
smaller, more

C)
larger, less

D)
smaller, same

Answers

Answer:

HIGHER & MORE OR LARGER OR MORE

HENCE, THE ANSWER IS A. :)

Explanation:

#CARRYONLEARNING

BRAINLIEST PLEASE I REALLY NEED IT

E
D
С
B
A
Column
Column
1.
Electron Cloud
B
2
Nucleus
b. A
3.
Electron
CD
4.
Neutron
d.
5.
Proton
ec

Answers

Answer:

1. D electron cloud

2. A nucleus

3. E electron

4. B neutron

5. C proton

Explanation:

electrons are located outside the nucleus. The nucleus holds the protons and neutrons. Protons have a positive symbol (+). electron cloud holds the electrons.

Explanation:

Electron cloud : D

Nucleus : A

Electron : E

Neutron : B

Proton : C

hope this helps you.

Other Questions
Which of these men controlled the steel industry?A Cornelius VanderbiltB. John RockefellerO C. Andrew CarnegieGO D.B Benjamin Harrison Describe how total job benefits and total employee compensation differ If you were an astrobiologist, what would you do to search for life? Calculate the average speed of an airplane, in miles per hour, if it travels 1,000 miles in 22 1 2hours. pls someone help me. Read the two passages and answer the question.Passage 1[1]Nothing that comes from the desert expresses its extremes better than the unhappy growth of thetree yuccas.Tormented, thin forests of it stalk drearily in the high mesas, particularly in thattriangular slip that fans out eastward from the meeting of the Sierras and coastwise hills. Theyucca bristles with bayonet-pointed leaves, dull green, growing shaggy with age like an old[5] man's tangled gray beard, tipped with panicles of foul, greenish blooms. After its death, which isslow, the ghostly hollow network of its woody skeleton, with hardly power to rot, makes eventhe moonlight fearful. But it isn't always this way. Before the yucca has come to flower, whileyet its bloom is a luxurious, creamy, cone-shaped bud of the size of a small cabbage, full ofsugary sap, the Indians twist it deftly out of its fence of daggers and roast the prize for their[10] own delectation.Passage 2[1]I wandered lonely as a cloudThat floats on high o'er vales and hills,When all at once I saw a crowd,A host, of golden daffodils;[5]Beside the lake, beneath the trees,Fluttering and dancing in the breeze.Continuous as the stars that shineAnd twinkle on the milky way,They stretched in never-ending line[10]Along the margin of a bay:Ten thousand saw I at a glance,Tossing their heads in sprightly dance.The waves beside them danced; but theyOut-did the sparkling waves in glee:[15]A poet could not but be gay,In such a jocund company:I gazedand gazedbut little thoughtWhat wealth the show to me had brought:For oft, when on my couch I lie[20]In vacant or in pensive mood,They flash upon that inward eyeWhich is the bliss of solitude;And then my heart with pleasure fills,And dances with the daffodils.Both passages describe a plant. The yucca tree "stalks drearily" while the daffodil "dances." What does this word choice reveal about how the two passages view nature? Passage 1 views nature as boring while Passage 2 views natures as exciting. Passage 1 views nature as enlightening while Passage 2 views nature as depressing. Passage 1 views nature as harsh while Passage 2 views nature as delightful. Passage 1 views nature as intense while Passage 2 views nature as relaxing. ______the rain stopped, we ran outside to play Capture the Flag. Do you think this wing is from the left side or the right side of the chickens body? Explain your answer find the slope of the line that passes through (3,1) (4,9) can someone help me rc :) At Buffalo Wild Wings, you order a meal that costs $15.86. You leave an 18% tip (on the pre-tax amount).The sales tax is 8%. What is the total cost of the meal? Why did Spain not invade France while France and England were fighting? Ellen held a substance that is comprised of elements that have been chemically joined. The substance now has different properties than the elements that were joined to make it. Ellen is most likely holding a a. compound b. water molecule c. single atom d. mixture 2x+3x-5=0 what role did terrorism play in reconstruction? please help this is for a presentation.. Is the spongy parenchyma cell unicellular or multicellular? yooo i have not been on here for like a year or so. whats poppin 100 points, help yo boi out in Science, Giving brainy to best answer!!!!Question 1 :In one to two sentences, explain why low-pressure systems are associated with bad weather?Question 2:In 12 sentences, explain what biome comprises most of Antarctica and why the continent is described as being part of this biome. if A and B are non zero vectors, is it possible for vector Avector B and vector A.vector B both to be zero? Justify your answer of all leadership variables, _____ leadership is the one most universally endorsed across cultures.