Answer:
Those aspects which are something a village needs are specified beneath.
Explanation:
Things being equally necessary to make living simpler and therefore more enjoyable. The government has promised to continue providing basic facilities to either an unpopulated location, including such roads, drinkable water, as well as electric power. Therefore, throughout the village, certain things accessible with maximum variety and quality that have become the basic requirements for this human existence.what do y’all do when y’all brainly says “locked” and won’t show anymore answers !???
Answer:
Create a new account as the thing you're experiencing now is due to the fact that Brainly had blocked your account.
Which among the following mixtures will show tyndal effect?
i) copper sulphate solution
ii) sand in water.
iii) milk.
iv) starch solution
Answer:
milk and starch solution are the colloids, hence these will show the tyndall effect
Answer:
milk and starch solution
Explanation:
Tyndall effect is shown by colloidal solutions. It is not shown by true solutions or suspensions.
Milk and starch solution are colloidal solutions. They show tyndall effect. On the other hand, common salt and copper sulphate solution are true solutions. They do not show tyndall effect.
Explain why the reaction between lead oxide and carbon is called a redox reaction.....
Answer:
Explanation:
It's called a Redbox reaction because when a change in oxidation number occurs in a reaction, with both an increase in number and a decrease in number, then the reaction is classified as redox. If this doesn't occur, then the reaction is non- redox.
Mark as brainliest if useful
5) O etanol C2H6O, combustível produzido em grande escala no Brasil, pode ser obtido pela fermentação da sacarose C12H22O11 encontrada na cana-de-açúcar. Esse processo consiste na degradação por enzimas de micro-organismos da sacarose. Um técnico de laboratório preparou uma solução aquosa misturando 33 g de sacarose em 200 mL de água. Ao final, a solução ficou com um volume de 220 mL. Qual a concentração em g/l desta solução sabendo que a formula é C=Mg /VL a) 0,15 b) 0,165 c) 66 d) 15 e) 150
Answer:
a) 0.15
Explanation:
A concentração de sacarose é 0,15 g / l no etanol. O Brasil está produzindo etanol em grandes quantidades que é usado como combustível em veículos e indústrias. Este etanol é produzido a partir da cultura da cana-de-açúcar e o Brasil é o segundo maior produtor mundial com cerca de 34,45 bilhões de litros em 2019. Os Estados Unidos da América e o Brasil produzem cerca de 84% do etanol mundial.
what is the molarity of a 0.478 mole substance whose volume is 6L
Answer:
Molarity is 0.08 M
Explanation:
Molarity is the number of moles in 1 litre of solution.
[tex]{ \tt{6 \: litres \: = \: 0.478 \: moles}} \\ { \tt{1 \: litre = ( \frac{1}{6} \times 0.478) \: moles}} \\ \\ { \tt{molarity = 0.08 \: mol \: {l}^{ - 1} }}[/tex]
[tex]{ \underline{ \sf{ \blue{christ \: † \: alone}}}}[/tex]
Which is a correct statement of what occurs at a turbine during electricity
production?
A. They are burned by fossil fuels.
B. They are turned by workers,
C. They are melted by heating.
O D. They are turned using steam.
Answer:
I think option(D) is more appropriate but not sure.
The correct statement of what occurs at a turbine during electricity production is they are turned using steam. The correct option is D.
What is a turbine?A turbine is a fan-like structure that runs by hydro or air power that generates electricity. Turbines that produce electricity are huge structures made of iron or heavy metal.
Electricity is a form of energy that converts thermal energy into electrical energy, which leads to burning the light or running fans and other machines. It is an important form of energy because all machines and power run by electricity.
Turbines run by using steam. They convert steam or fluid or air into mechanical energy. The water run over the turbines and when turbines move it produces electricity and energy.
Thus, the correct option is D. They are turned using steam.
To learn more about turbines, refer to the link:
https://brainly.com/question/2223578
#SPJ5
Define physical and chemical properties, provide three examples of each, discuss their reversibility, and explain the fundamental differences between them.
Answer:
Physical properties are defined as the properties which can be observed without changing their chemical composition.
For example, color, volume, and molecular weight.
Chemical properties can be defined as, a properties that can be seen only after changing the substance's chemical identity.
For example, reactivity, toxicity, and flammability.
The fundamental differences between physical and chemical properties are as follows:
Chemical properties are related to chemical bonds of the substance, while physical properties are not.
In chemical properties, the chemical identity of substance changes while physical properties does not have any change.
Chemical properties predict the reaction of a substance, while physical properties only describe the appearance of the substance.
Explanation:
In common speech, some people may use the terms hypothesis and theory interchangeably. In science, however, the terms have different meanings. What do you think is an important difference between a hypothesis and a theory?
Answer: In science, a hypothesis is a possible explanation for an observation, while a theory is an explanation that is supported by a large body of evidence.
Explanation: exact answer
I need help!!!! please
6.94 is much more closet to 7.016, so Li 7 is more abundant
Question 4 of 20:
Select the best answer for the question
4. Which of the following is a design theory from the 1980s that uses mathematics to guide computer-aided design
O A. C-K Theory
O B. General Design Theory
O C. ASE
O D. TRIZ
general design theory
It is, general design theory introduced in 1980s that uses mathematics to guide computer - aided design. Hence, option B is correct.
What is general design theory ?A variety of new design theories were developed in the 1980s as a result of technology developments like computer-aided design (CAD). The 1981 article "General design theory and a CAD system" by Hiroyuki Yoshikawa contains one of the early references to GDT.
Yoshikawa's theory "ultimately aims at elucidating the human capacity for designing in a scientific fashion, while simultaneously producing the practical information about design technique.
Many different approaches and interpretations of design theory have been made, ranging from personal statements of design principles made by designers, to philosophical conceptions of design, to a search for a design science using advanced mathematics. Hence, option B is correct.
Find more on general design theory:
https://brainly.com/question/14165397
#SPJ7
what is filtration? ㅜㅜ ㅜㅜ
Answer:
filtration is the process of using a filter to remove solids from liquids or gasses.
Example:
an example of this is tea.
3. An atom
OF
elemente A has mass number 39 and 19 protons
Write the electron arrangement of the atom
Answer:
Explanation:
Potassium (K) atom has 19 electrons. The full electron configuration of Potassium (K) is 1s22s22p63s23p64s1
Principal energy level
Quantum number: n
1
2
3
4
5
6
Sublevels
availableQuantum number: l
1s
2s 2p
3s 3p 3d
4s 4p 4d 4f
5s 5p 5d 5f 5g
6s 6p 6d 6f 6g 6h
best way to separate a solid from a liquid what separation technique is needed
Answer:
Filtiration technique
Explanation:
Which fact was most likely discovered between the time of Mendeleev’s table and the time of Moseley’s table that helped Moseley develop his version?
Answer:
The number of protons in an atom is different than the atom’s total mass.
Explanation:
Mendeleev knew only that, with some anomalies, the properties of elements varied periodically with their atomic masses.
Moseley's X-ray experiments enabled him to remove these anomalies and to show that the properties of elements varied with their atomic numbers.
Chadwick later discovered that the mass differences were caused by the presence of neutrons.
career in chemistry list ten
Explanation:
Chemistry Teacher.
Chemical Engineer.
Forensic Scientist.
Geochemist.
Biochemists
Pharmacologist
Analytical Chemist
Envionmental chemist
Water Chemist
Catalysis
c. CaCl2 can be melted to produce calcium metal and give off chlorine gas. The equation for this
is CaCl2()→ Ca(s) + Cl2(g). If 277.45 g CaCl2 were melted, how many grams of Ca(s) would
be formed? (10 points)
HELP MEEEEE PLEASE
Answer:
Total gram of Ca = 99.26 g
Explanation:
Given:
Mass of CaCl₂ = 277.45 g
Find:
Mass of Ca
Computation:
Ca = 40 g/mol
Cl₂ = 2 (35.5) g/mol = 71 g/mol
Total CaCl₂ = 111 g/mol
Total gram of Ca = [40 / 111] 277.45 g
Total gram of Ca = 99.26 g
(30 points) alright so there’s this girl I’m ab to slide in her dms I just need a pickup line but nothing inappropriate bc I don’t like to slide in thirsty so if anyone has a completely hydrated cute pickup line help a simp out
Answer:
Are you a fruit, because honeydew you know how beautiful you look right now?
or maybe
I hear you’re good at algebra…..Will you replace my eX without asking Y?
or maybe
On a scale of one to ten you’re a nine… Because I’m the one left that you need.
Explanation:
Hope these help you.
What name is given to a non-metal when it forms an ion, and what type of charge does it have?
Answer:
Anions name is given to a non-metal when it forms an ion, and it has negative charge.
Answer:
Non metals form negative ions and negatively charged ions are called anions.
Hope I'm correct!!
A scientist wants to know: "If salt is added to water, would the
solution still boil at the same temperature?"
torcses
Answer:
no, the sollution will boil at a higher temperature because the density of the sollution will increase when salt is added to it
What group is calcium and sodium in?
Answer:
Calcium: Alkaline Earth
Sodium: Alkali Metal
Hope it helps!
Answer:
Calcium is in Alkaline Earth
Sodium is in Alkali Metal
what is plasma in chemistry
Explanation:
Plasma is an ionized gas, a distinct fourth state of matter. “Ionized” means that at least one electron is not bound to an atom or molecule, converting the atoms or molecules into positively charged ions.but plasma is present in human body too in a liquid form.
hope this helps you
have a nice day
3. why are fire tornadoes rare ?
pls balance the following chemical equation asap; Ca(OH)2 +CO2 = CaCO3+ H2O pls make it step by step
Answer:
Explanation:
Start by writing water as HOH
Ca(OH)2 +CO2 = CaCO3+ HOH
Next pay attention to the CO2 going to CO3
We need an oxygen.
Fortunately that is provided by the (OH)2
Now we have
Ca(OH)2 + CO2 ==> CaCO3 + HOH
and believe it or not, that is balanced as it is
The left side has 1 Ca. So does the right side
The Left side has 1 C. So does the right side.
The left side has 2 H. So does the right side
The left side has 2 oxygens (in Ca(OH2)) + 2 oxygens in CO2
So the equation is balanced.
phương trình nào sau đây không đúng
Mg(OH)2 (t°)→ MgO+H2O
Fe(OH)2 (t°,chân không)→FeO+H2O
2Fe(OH)3 (t°)→Fe2O3+3H2O
2NaOH (t°)→Na2O+H2O
Phương trình NaOH sai nha
Find the density of a cube on Earth that weighs 1.5 kg and has a side-length of 10 cm.
Answer:
1500kg/m^3
Explanation:
Formula:
d=m/v
Given:
m=1.5kg
v=1000cm^3
(The side length of a cube is always equal to the others)
Required:
d=?
Solution:
d=m/v
d=1.5kg/1000cm^3
d=1.5kg/0.001m^3
d=1500kg/m^3
Hope this helps ;) ❤❤❤
18. If the pH of a strong acid solution is known to be 3.25, what is the [H+)?
(b) what is the pOH of this solution?
Select the correct answer from each drop-down menu. At chemical equilibrium, the amount of because .
Answer:
The answer that completes the question are in BOLD:
At chemical equilibrium, the amount of PRODUCT AND REACTANT REMAIN CONSTANT because the RATES OF THE FORWARD AND REVERSE REACTIONS ARE EQUAL.
Explanation:
In a reversible chemical reaction, an equilibrium is said to be achieved when the rates of the forward reaction is equal to that of the reverse reaction. A reversible reaction is one in which products are formed from reactants simultaneously with the formation of reactants from products.
The combination of two or more substances called REACTANTS gives rise to another substance called PRODUCT, which can in turn give rise to Reactants again. With time, the rate at which the reactants give rise the products, which is called the FORWARD REACTION will be equal to the rate at which the products give rise to the reactants, which is called REVERSE REACTION. At this point, the chemical reaction is said to be in a STATE OF EQUILIBRIUM.
When the rate at which both reaction occurs becomes equal i.e. at an equilibrium state, the concentration of both the reactants and the products becomes constant i.e. no longer changes. Hence, the amount of the reactants forming the products is the same as the amount of products forming the reactants.
N.B: At chemical equilibrium, the amount of the reactants and products does not necessarily equals zero (0). It simply means that there is no net change in the concentration/amount of both reactants and products.
Drag each tile to the correct image. Match each hydrocarbon class to its structure. carboxylic acid amine halocarbon alcohol
Answer:
1. Amine.
2. Alcohol.
3. Carboxylic Acid.
4. Halocarbon.
Explanation:
The correct answer according to the tile are Amine, Alcohol, Carboxylic acid, Halocarbon.
How can hydrocarbons be classified based on their structure?
Hydrocarbons can be classified as either aromatic or aliphatic compounds, depending on the presence of a benzene ring.
What is the most common classification of hydrocarbons?
Alkanes are hydrocarbons in which all of the bonds are single bonds. Alkenes are hydrocarbons that contain a carbon-carbon double bond.
Learn more about hydrocarbon here : brainly.com/question/490217
#SPJ2
Levi decides to examine the effect of fertilizer on the growth of tomato plants. He chooses four plants for his experiment and applies varying amounts of fertilizer to three of them. He does not apply fertilizer to one plant. Over a 15-day period, the plants receive fertilizer on Days 1, 4, 7, 10, and 13. Levi measures the height of all of his plants with a meter stick on days 3, 6, 9, 12, and 15. He also makes sure to hold all experimental factors constant except for the fertilizer.
Where should the independent and dependent variables of Levi's experiment be placed when graphed?
Select all that apply.
the amount of fertilizer;y-axis
plant height;x-axis
the amount of fertilizer;x-axis
plant height; y-axis
Answer:
the amount of fertilizer; x-axis
plant height; y-axis
Explanation:
The independent and dependent variables of Levi's experiment placed when graphed are the amount of fertilizer and the y-axis. Option B is correct.
What are independent and dependent variables?The independent variables are those which are not dependent on other factors for their working or cannot be influenced by any other factor and the dependent variable is just the opposite of this one.
The experiment depends on the height of the plant but the fertilizer is independent of to work of the plant and fertilizer is independent and high and depends on other factors.
Therefore, Option B is correct. independent and dependent variables of Levi's experiment placed when graphed are the amount of fertilizer and the y-axis.
Learn more about independent and dependent variables, here;
https://brainly.com/question/1479694
#SPJ2
Answer the question in attachment and can I ask from which country you are.
I am new on this app.
✌️✌️☺️☺️
Answer:
1: exothermic
2:hydrated iron (III) oxide
3:reactants
4:precipitate
5: hydrogen gas
Answer:1.exothermic
2.hydrated iron (III) oxide
3.reactants
4.precipitate
5. hydrogen gas