What affect does doubling the net force have on the acceleration of the object (when
the mass of the object stays the same)? Identify a set of two trials that support your answer to question 1
===========================================================
Explanation:
Consider a mass of 10 kg, so m = 10
Let's say we apply a net force of 20 newtons, so F = 20
The acceleration 'a' is...
F = ma
20 = 10a
20/10 = a
2 = a
a = 2
The acceleration is 2 m/s^2. Every second, the velocity increases by 10 m/s.
---------------
Now let's double the net force on the object
F = 20 goes to F = 40
m = 10 stays the same
F = ma
40 = 10a
10a = 40
a = 40/10
a = 4
The acceleration has also doubled since earlier it was a = 2, but now it's a = 4.
---------------
In summary, if you double the net force applied to the object, then the acceleration doubles as well.
Acceleration is directly proportional to the net force on an object, and inversely proportional to its mass.
So if an object's mass stays the same while the net force on it doubles, then its acceleration will also double.
We don't know anything about the "trials". This sounds like it might be a follow-up to a lab experiment that was performed when we weren't there.
We also don't know anything about "question 1".
Using only one management style with all people is the most effective leadership technique for any organization.
Answer:
False
Explanation:
More than one management style with all people is the most effective leadership technique for any organization. So, the given statement is False.
What is Leadership technique?Leadership styles are defined as those adopted by company leaders to increase efficiency, satisfaction, growth and advancement in all positions in the organization. It requires a different style in different situations and each leader needs to know when to show a special behavior.
These strategies define every leader's personal leadership style. Some effective leadership Techniques are as follows:
Understanding the objectives clearlyGet to know the teamAlways be a learnerListen.Learn to delegate.Thus, more than one management style with all people is the most effective leadership technique for any organization. So, the given statement is False.
Learn more about Marketing techniques, here:
https://brainly.com/question/29843697
#SPJ2
a student pushes a book with a force of 5 N to the east.which statement
describes the reaction force?
Answer:
5N westward, acting on the student
Explanation:
Answer: 5N westward, acting on the student
Explanation:
A ball of mass 200 g rolls along the ground at a speed of 5.2 m/s. Calculate the kinetic energy of the ball.
Answer:
We have a mass of 200g (0.2kg) moving at 20m/s
Kinetic Energy KE = ½ mv^2 where m is mass and v is velocity
Actually, v is a vector quantity, so KE = ½ mv•v
The dot product of 2 vectors a and b is abCosθ where θ is the angle between the vectors.
Obviously v•v = v^2 Cos0 = v^2
In this case, we have KE = ½ (0.2)(20^2) = 40kg-m^2/s^2 = 40J
So we have kinetic energy in the amount of 40 Joules.
Explanation:
The right answer is "2.7 J"
Answer explanation:
Remember to convert grams to kilograms first by dividing by 1000.
Kinetic energy
= 1/2 × mass × speed2
= 1/2 × 0.2 kg × (5.2 m/s)^2
= 2.7 J (to 2 sig. fig.)
Hope it helps ✨✨
The mining-resource cycle determines the use of ore materials. Which step is not part of the cycle?
A)
exploring and extracting ores
B)
refining ores and creating products from ore materials
C)
marketing and selling products that use ore materials
D)
recycling and disposing of wastes from the steps and the products
Answer:
c) marketing and selling products that use ore materials
what is measurement ?
Answer: Measurement is the assignment of a number to a characteristic of an object or event, which can be compared with other objects or events. The scope and application of measurement are dependent on the context and discipline. In the natural sciences and engineering, measurements do not apply to nominal properties of objects or events, which is consistent with the guidelines of the International vocabulary of metrology published by the International Bureau of Weights and Measures. However, in other fields such as statistics as well as the social and behavioural sciences, measurements can have multiple levels, which would include nominal, ordinal, interval and ratio scales.
Explanation:
The force of gravity depends on the mass of objects and the distance between them. TRUE OR FALSE?
The force of gravity depends on the mass of objects and the distance between them. This is true statement.
What is force?Physics defines force as the push or pull that modifies the velocity of a massed object.
The ability to change a body's resting or moving condition is referred to as an external force. There is a magnitude and a direction to it.
You may determine the Force using a spring balance. The SI's measure of force is the Newton.
The force of gravity between two objects is directly proportional to the mass of the object and inversely proportional to the square of the distance between them.
Hence, the force of gravity depends on the mass of objects and the distance between them. This is true statement.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ2
I WILL GIVE BRAINLIEST A battery contains two metals that have different tendencies to attract electrons. If one is lithium with an electron affinity of −3.05, and the other is zinc with an electron affinity of −0.76, describe how the electrons will flow. Then, describe how you could make this an even stronger battery. (4 points)
Answer:
electrons will flow from lower (lithium) to higher (zinc)
You can make a stronger battery by having a larger electron affinity difference.
Hope this helps \(-._.-)/
Covert 1 mile to feet. Then convert to inches. Then covert to centimeters. How many centimeters are in a mile?
Answer:
160,934.4 cm or in other words *160,934*
Explanation:
1 mile = 5280 ft.
5280 ft. = 63360 in.
63360 in. = 160934.4
a meteor Falls towards Earth's surface given that the acceleration due to gravity is 9.8 m/s^2 what is the meteors potential energy if it has a mass of 20kg at an altitude of 500
Answer: It’s 98,000
Explanation: Just did it on apex
Polymetrics can help a person maintain cardiorespitory fitness T or F
Answer:
True
Explanation:
The term 'plyometrics' is used interchangeably with the term 'jump training'. The technique can be used for training in sports that require explosive movements.
how many apples are in 29 trees if each tree has 45 apples?
Answer:
1305 I think but not sure
HELP ME PLEASE. i need to turn this in by tomorrow, also pls use the words above^ thank you i’ll mark u the brainliest.
Answer:
the corrdct answer is core
Given 1 inch ≡ 2.54 cm and 1 foot ≡
12 inches, how many square centimeters are
in 3.22 ft2
?
Answer:
2991.47 [cm^2]
Explanation:
To solve this problem we must perform a dimensional analysis and use the corresponding conversion values:
[tex]3.22[ft^{2}]*\frac{12^{2}in^{2} }{1^{2}ft^{2}} *\frac{2.54^{2}cm^{2} }{1^{2}in^{2} } \\2991.47[cm^{2}][/tex]
What is a scientific theory?
Answer:
Scientific theories are explanations of some aspect of the natural world based on repeated observations.
Hope this helps!!!!
Answer:
The way that scientists use the word 'theory' is a little different than how it is commonly used in the lay public," said Jaime Tanner, a professor of biology at Marlboro College. "Most people use the word 'theory' to mean an idea or hunch that someone has, but in science the word 'theory' refers to the way that we interpret facts.
Explanation:
I need help with this physics question
A 2000 kg car moves along a horizontal road at speed vo
15.9 m/s. The road is
wet, so the static friction coefficient between
the tires and the road is only pls 0.105 and
the kinetic friction coefficient is even lower,
= 0.0735.
The acceleration of gravity is 9.8 m/s2.
What is the shortest possible stopping dis-
tance for the car under such conditions? Use
g= 9.8 m/s² and neglect the reaction time of
the driver.
Answer in units of m.
Answer:
The shortest possible stopping distance of the car is 175.319 meters.
Explanation:
In this case we see that driver use the brakes to stop the car by means of kinetic friction force. Deceleration of the car is directly proportional to kinetic friction coefficient and can be determined by Second Newton's Law:
[tex]\Sigma F_{x} = -\mu_{k}\cdot N = m \cdot a[/tex] (Eq. 1)
[tex]\Sigma F_{y} = N-m\cdot g = 0[/tex] (Eq. 2)
After quick handling, we get that deceleration experimented by the car is equal to:
[tex]a = -\mu_{k}\cdot g[/tex] (Eq. 3)
Where:
[tex]a[/tex] - Deceleration of the car, measured in meters per square second.
[tex]\mu_{k}[/tex] - Kinetic coefficient of friction, dimensionless.
[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.
If we know that [tex]\mu_{k} = 0.0735[/tex] and [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], then deceleration of the car is:
[tex]a = -(0.0735)\cdot (9.807\,\frac{m}{s^{2}} )[/tex]
[tex]a = -0.721\,\frac{m}{s^{2}}[/tex]
The stopping distance of the car ([tex]\Delta s[/tex]), measured in meters, is determined from the following kinematic expression:
[tex]\Delta s = \frac{v^{2}-v_{o}^{2}}{2\cdot a}[/tex] (Eq. 4)
Where:
[tex]v_{o}[/tex] - Initial speed of the car, measured in meters per second.
[tex]v[/tex] - Final speed of the car, measured in meters per second.
If we know that [tex]v_{o} = 15.9\,\frac{m}{s}[/tex], [tex]v = 0\,\frac{m}{s}[/tex] and [tex]a = -0.721\,\frac{m}{s^{2}}[/tex], stopping distance of the car is:
[tex]\Delta s = \frac{\left(0\,\frac{m}{s} \right)^{2}-\left(15.9\,\frac{m}{s} \right)^{2}}{2\cdot \left(-0.721\,\frac{m}{s^{2}} \right)}[/tex]
[tex]\Delta s = 175.319\,m[/tex]
The shortest possible stopping distance of the car is 175.319 meters.
PLEASE HURRYYYYYY:
Students had two batteries and two different resistors. During four trials, they build four different circuits and plan to measure the circuit’s current in Amps according to the following table.
Trial Number
Voltage (V)
Resistance (Ω)
Current (A)
1
1.5
200
2
1.5
100
3
3.0
200
4
3.0
100
For which trial would the students measure the smallest current in the circuit?
Answer: C. Trial 3
Explanation:
Trial 1 and 2 equal 1.5, Trial 3 equals 1 and Trial 4 equals 3. Trial 3 is the smallest current .
The trial for which the students would measure the smallest current is the circuit is trial 2 and trial 3.
To know the trial which generates the smallest current, we need to determine the current in each trial.
Since current I = V/R where V = voltage and R = resistance.
For trial 1, V = 1.5 V and R = 200 Ω
So, I = 1.5 V/200 Ω
= 0.0075 A
= 7.5 mA
For trial 2, V = 1.5 V and R = 100 Ω
So, I = 1.5 V/100 Ω
= 0.015 A
= 15 mA
For trial 3, V = 3 V and R = 200 Ω
So, I = 3 V/200 Ω
= 0.015 A
= 15 mA
For trial 4, V = 3 V and R = 100 Ω
So, I = 3 V/100 Ω
= 0.03 A
= 3 mA
Trial 2 and trial 3 both produce a the smallest current of 15 mA.
So, the trial for which the students would measure the smallest current is the circuit is trial 2 and trial 3.
Learn more about current here:
https://brainly.com/question/996480
A battery of emf 24v and terminal resistance 4 ohms is connected to a resistor of 32 ohms. What is the terminal pd of the battery?
Answer:
21.3V
Explanation:
Explanation
E = V + Ir
V = E- Ir
V = 24 - {(24/36) x 4}
V = 21.3V
Fy is the reaction force from Plate Y. What Statement best describes the action and reaction forces on the plates? Tectonic plates
Answer:
According to Newton's third law of motion, the reaction force is equal to the action force.
Explanation:
Newton's third law of motion states that for every action there is an equal and opposite reaction. This means that if one object exerts a force on a second object, the second object exerts an equal force in the opposite direction. When Plate X pushes on Plate Y with the action force (Fx), Plate Y must push back with an equal force (Fy).
Therefore, the best explanation is that according to Newton's third law of motion, the reaction force is equal to the action force.
For every action, there has equal and opposite reaction - this statement best describes the action and reaction forces on the plates.
What is Newton's 3rd law of motion?As a result of this interaction, there are two forces: one from plate X and one from plate Y. The third law of motion of Newton deals with these two forces, which are referred to as action and reaction forces. Newton's third law is officially expressed as follows: There is an equal and opposite reaction to every action.
The implication of the statement is that there are always two forces acting on the two interacting objects. The force acting on the first object is equal in size to the force acting on the second. The force acting on the first object is acting in the opposite direction to the force acting on the second object. Force pairs—equal and opposing action-reaction force pairs—always exist in pairs.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ5
a car travels 200m in 30 s and 400m in the next 90s. Whats the average speed?
Answer:
300m per minute or 5m per second
Can you pls answer the 2 questions
Answer:
1) False, since constant speed means constant velocity, but with constant direction as well. Velocity is speed with direction. When you move in a circle, there are boundaries which means that a constant moving speed will cause the object to veer(move in different directions) to maintain movement, If it doesn't veer, the object will deflect(rebound) off the surface due to friction, and impact force or depending on its physical bond of malleability or density.
2a) Create position vectors by drawing a ray from the center(origin) of the circle to each of your desired points, it's magnitude will be the radius(how convenient). Both of these vectors go from the center of the circle to the position on the circle. In general, the distance from the origin to a point is called the radius vector.
2b)
A book with a mass of 1kg is dropped from a height of 3m . What is the potential energy of th book when it reaches the floor?
Answer:
30 J
Explanation:
height = 3 m
mass = 1kg
acceleration due to gravity = 10m/s²
Potential Energy = mass× gravity × height
= 1kg ×10m/s²× 3m
= 30 J
A tree is turned into sawdust is that physical change or chemical change?
Answer:
Physical change
Explanation:
A physical change can be reversible where the original form of the matter can be restored, or irreversible where the original form cannot be restored. Therefore, sawdust is a physical change.
does anyone know how to do this
If a hypothesis is.......
additional tests should be done to ensure accurate results.
a. correct
b.incorrect
c. unknown
d. inconclusive
Answer:
a correct
Explanation:
a hypothesis is a supposition made of a basis of limited evidence
What is a good question for a Science Fair (7th grade advanced) also im an online student so nothing really physical something that can really explain thru pictures. I just want suggestions thank you.
How do you calculate the radius of a planets orbit with mass and time ?
Answer:
By observing the time between transits, we know the orbital period. Kepler's Third law can be used to determine the orbital radius of the planet if the mass of the orbiting star is known (R3=T2−Mstar/Msun, the radius is in AU and the period is in earth years).
Explanation:
hope this helps!
What does Newton's third law describe?
A. Equal and opposite forces
B. How the amount of mass influences the amount of force needed
to move an object
C. The tendency of moving objects to stay in motion
D. The attractive force between two objects due to their masses
A loaf of bread bakes in an oven. The bread is on a rack about one foot above the heat source. However, the top of the bread cooks just as fast as the bottom. How is heat being added to the bread?
Answer:
the bread is getting heated from top and bottom because the oven is heated all over and the particles from the oven makes the bread's particles heat up and the bread will be done
Explanation:
i have the same answer
Answer:
The air is heated by the heat source in the oven. The hot air rises, surrounds the bread, and heats the bread on all sides.
Explanation: