-142.4°C is the freezing point of a solution of 498mL of water (solute) dissolved in 2. 50 L of ethanol (solvent), [tex]C_{2}[/tex][tex]H_{5}[/tex]OH .
A liquid transforms into a solid at the freezing point. Similar to the melting point, the freezing point typically rises with increasing pressure. Combinations and some organic matters, such as lipids, have such a freezing point that is lower than their melting points.
This exercise deals with the concept of cooperative characteristics, specifically freezing point depression.
ΔT = Kf . m . I
Where T = Solution Freezing T° - Solvent Freezing T°
Cryoscopic constant is Kf.
[tex]\frac{mol}{kg}[/tex] = m (molality)
I = The number of dissolved ions.
As water is not ionic, I equals 1.
Let's investigate m.
We calculate water mass using density.
1 g/mL x 498 ml = 498 g
We convert 498 g of water's mass to moles. [tex]\frac{1mol}{18g}[/tex] = 27.6 moles.
We calculate the solvent's mass using density.
1500 mL x 0.789 g/mL = 1972.5 g
Note that in order to cancel units, we have to convert L to mL.
1 cm³ = 1 mL
We convert mass in the range 1972 from g to kg.
5 g . [tex]\frac{1kg}{1000g}[/tex] = 1.97kg
We discover that m = mol/kg = 13.9 m = 27.6 mol / 1.97 kg.
ethanol's Kf is 1.99 °C/m.
For ethanol, the freezing point is -114.6°C.
We substitute at formula: 114.6 ° C - Freezing T ° solution = 1.99 ° C/m. 13.9 m.
Freezing T° solution = 27.8 °C at 114.6 °C.
- The freezing point solution is 27.8°C plus 114.6°C.
Solution for Freezing T° = -142.4 °C
For such more questions on Freezing point:
brainly.com/question/1550397
#SPJ4
What is the product of C3H8 and o2?
C3H8 and o2 produces CO2 + H2O, which is an example of a combustion process. Carbon dioxide and water are produced when propane completely burns when there is too much oxygen present.
When two atoms share electron pairs, a covalent link is created. They fall into three categories: single, double, and triple.
In a combustion process, a chemical interacts with oxygen gas to release energy in the form of heat and light. O2 must be a reactant in all combustion processes. Water vapour is created when hydrogen gas is burned.
An accident occurred when the Hindenberg, an airship loaded with hydrogen, tried to land in New Jersey in 1937. 36 persons were killed when the airship was destroyed and the hydrogen instantly exploded in a massive explosion. The chemical process was straightforward: water was created when hydrogen and oxygen combined.
Learn more about Combustion here:
https://brainly.com/question/13153771
#SPJ
are the following materials (a) pure substances, (b) homogenous mixtures, or (c) heterogenous mixtrues?
A substance or combination of substances that makes up an object is called the material.
Pure substances typically only include one type of atom or molecule and are homogeneous in nature.
A mixture is said to be homogenous if its composition is constant throughout. Because the dissolved salt is evenly distributed throughout the whole salt water sample, the salt water described above is homogenous.
A combination is said to be heterogeneous if its composition is not constant throughout. Vegetable soup is a complex concoction. Each mouthful of soup will have differing percentages of the various veggies and other ingredients.
To know more about mixture
https://brainly.com/question/24898889
#SPJ4
What Type of Eye Protection Should I Wear for Various Hazards? Chemicals Hazardous* dry chemicals and small amounts of hazardous liquid chemicals Safety glasses Eye protection is required when working with chemicals on the bench or in a fume hood Hazardous* chemicals that pose a splash hazard Chemical splash goggles Cryogenic liquids Chemical splash goggles and a face shield Highly reactive or explosive materials Chemical splash goggles and a face shield Blast shield recommended Pyrophoric solids or liquids Chemicals splash goggles Biological Material Potentially infectious materials, including BSL2 microorganisms and viruses, human and non-human primate material, outside of a biosafety cabinet Safety glasses plus mask or face shield Eye protection is typically not required when working in a biosafety cabinet, except if other hazardous materials are being handled in the lab. Eye protection may be needed when removing items from the biosafety cabinet. Radiation Unsealed radioactive materials, liquid or powder Safety glasses Lasers Eyewear is dependent on wavelength and energy/power of laser Contact Laser Safety Officer at 8-6271 Open ultraviolet light source Face shield with UV protection Infrared emitting equipment Shaded goggles Machining and Physical Hazards Soldering, spatter of flux or hot metal Safety glasses or chemical splash goggles Furnaces, molten metal or glass, heat, sparks, glare Dust goggles, reflectivce face shield Chips, particles, dust, glass shards Safety glasses Glassware under pressure Safety glasses or chemical splash goggles Cutting/connecting glass tubing Safety glasses Welding and brazing operations See OSHA Factsheet - Eye Protection During Welding(link is external) Changing out compressed gas cylinders, affixing regulator to cylinder Safety glasses Use of compressed air for cleaning equipment Dust goggles Use of compressed air for personal cleaning is prohibited
They are goggles, safety glasses, and face shields. Safety Glasses: Safety glasses have side shields and lenses composed of plastics like propionate or polycarbonate that are shatter-resistant.
They are designed to stop objects like wood chips and other heavy, dangerous objects from damaging your eyes. Protection from collision, dust, and chemical splashes is provided by goggles. Like safety glasses, safety goggles are very impact resistant. They also provide a secure barrier around the entire eye, protecting it from threats coming from all directions. Side protection is required. Direct ventilated goggles, commonly referred to as dust goggles, are a form-fitting style of eye protection designed to keep large particles out of the goggles. When handling hazardous substances, wear protective goggles or glasses at all times.
To learn more about polycarbonate click here https://brainly.com/question/20760323
#SPJ4
PLEASE HELP NOW!!!!!!!!!
The light energy is converted to chemical energy in the grass (option C).
What is a food chain?A food chain is the feeding relationships between species in a biotic community. Living organisms feed on one another to obtain energy.
According to this question, a food chain is given involving the following animals in order of energy transfer:
Sun, grass, grasshopper, frog, bird
The producer in the food chain is responsible for creating the chemical energy that is transferred from one organism to another via the process of photosynthesis.
According to this question, grass is the producer in the food chain, hence, will convert light to chemical energy.
Learn more about food chain at: https://brainly.com/question/16065961
#SPJ1
What is the equivalent mass of carbon in CH4?
The equivalent mass of the CH4 will be 16 gram.
Acids, bases, as well as salts have the following corresponding masses: Acid equivalent mass = molecular mass of both the acid/basicity. A base's equivalent mass is equal to its molecular mass divided by its acidity. The equivalent mass of such a salt is equal to the molecular mass of both the salt divided by the total positive valency of such metal atoms.
The given compound is CH4.
The molar mass of C = 12 g.
The molar mass of H = 1 g.
The equivalent mass = 12+(1)4 = 16 g.
In chemistry, equivalent weight was defined as the mass of one equivalent, or even the mass of a given material that would combine with others or displace a specified amount of another substance.
To know more about equivalent mass
https://brainly.com/question/20366679
#SPJ4
4Ni+3O2 —> 2Ni2O3
how many grams of nickle (iii) oxide is formed if 121.1g of nicklel reacts with 50.7 L of oxygen gas?
The mass of the oxide produced is 190g.
What is the mass of the Nickel formed?
We have to look at the equation of the reaction and this can now be able to give us an idea of the stoichiometry of the reaction and that would help the calculations that we want to make.
We have that;
Number of moles of the Ni = 121.1/59 g/mol
= 2.1 moles
Number of moles of the oxygen = 50.7 L * 1 mole/22.4 L
= 2.3 moles
If 4 moles of the Ni reacts with 3 moles of the oxygen
2.1 moles of the Ni reacts with 2.1 * 3/4
= 1.6 moles
Then the Ni is the limiting reactant
4 moles of the Ni produces 2 moles of the oxide
2.3 moles of the Ni would produce 2.3 * 2/4
= 1.15 moles
Mass of the oxide = 1.15 moles * 165 g/mol
= 190g
Learn more about mass:https://brainly.com/question/19694949
#SPJ1
The mitochondrion provides energy to the cell. The mitochondrion is to the cell as the _________________ is to the human body. (Hint: What human body system provides energy to the body?)
A. Digestive system
B. Nervous system
C. Immune system
D. Excretory system
Answer:
I think it's the immune system
Consider Ihe structures of substituted cyclohexane rings, and identify the == depicted position of the red methyl substituents CH Choose, Choose. CH, Choose_ CHa Choose H;C- choo; CHa Snoos Ac CH;
In the first structure, the red methyl substituent (CH3) is in the equatorial position.
In the second structure, the red methyl substituent is in the axial position.
In the third structure, the red methyl substituent is in the trans-3 position.
In the fourth structure, the red methyl substituent is in the axial position.
In the fifth structure, the red methyl substituent is in the equatorial position.
In cyclohexane, the ring flip can change the position of the substituents from axial to equatorial and vice versa. The stability of the cyclohexane conformation depends on the position of the substituents, the equatorial position is more stable than the axial position due to fewer steric interactions. In the given structures, the red methyl substituents are in different positions, and the position is described as axial or equatorial.
The position of the substituents in cyclohexane can be trans or cis, and it affects the stability of the conformation.
Read more about Organic chemistry:
https://brainly.com/question/704297
#SPJ4
Which chemical in vaping aerosol can cause popcorn lung?
Answer:
oxygebn
Explanation:
bc
What is the mass of 1.00 mole of carbon atoms?
Carbon atoms weigh 12.01g/mol in a mole.
12 grams of pure carbon-12 contain exactly one mole's worth of atoms (C-12). 12g of C-12 is equal to 1 mole, or 6.022 10²³ atoms.
On Earth, a compound's molar mass, which is also known as its molecular weight, is just the total mass of its constituent elements. The amount of matter in a substance or an object is measured by its mass. The kilogram (kg) is the fundamental SI unit of mass, while lower masses can also be measured in grams (g).
A substance's mole is equivalent to 6.022 x 10²³ of that material (such as atoms, molecules, or ions). The term "Avogadro's number" or "Avogadro's constant" refers to the number 6.022 10²³ .
To know more about carbon click here
https://brainly.com/question/22530423
#SPJ4
what would happen to your calculated molar mass if you did not clean your piece of metal and it had some non-reactive surface contaminant? likewise, what would happen to your calculated molar mass if you touched the piece of metal with your bare fingers between cleaning it and taking it to be weighed
If you did not clean the piece of metal and it had some non-reactive surface contaminant, the calculated molar mass would be higher than the actual molar mass because the contaminant would add additional mass to the metal.
If you touched the piece of metal with your bare fingers between cleaning it and taking it to be weighed, the calculated molar mass would be lower than the actual molar mass because the oils and salts on your skin would add additional mass to the metal.
The molar mass of a substance is the mass of one mole of the substance and is calculated by adding up the number of atoms of each element in the substance and multiplying this by the atomic mass of each element. Therefore, any additional mass added to the substance will result in a higher or lower molar mass depending on the amount of mass added.
If the piece of metal is not cleaned and has some non-reactive surface contaminant, then this contaminant would add additional mass to the metal, resulting in a higher calculated molar mass than the actual molar mass. Similarly, if the piece of metal is touched with bare fingers between cleaning it and taking it to be weighed, then the oils and salts on the skin will add additional mass to the metal, resulting in a lower calculated molar mass than the actual molar mass.
Learn more about The molar mass of a substance:
https://brainly.com/question/837939
#SPJ4
How does an increase in temperature affect the solubility of each compound in 100 g H2O?
Each chemical's solubility in 100 g of water varies depending on the solute, and vice versa: a rise in temperature also makes the solute. Most solid materials become more soluble as the temperature rises.
But the effect is erratic and varies widely from one solute to another. The temperature dependency of solubility can be seen using a solubility curve. A solid becomes increasingly water soluble as the temperature rises. The solubility of gases decreases with increasing temperature. A solution is made up of one or more solutes mixed uniformly in a solvent. Adding sugar cubes to a cup of tea or coffee is a common illustration. Each chemical's solubility in 100 g of water varies depending on the solute, and vice versa
Learn more about solvent here
https://brainly.com/question/14797683
#SPJ4
he hydrogen ion concentration of a solution can be represented as the ph value. the ph of a solution is defined as the negative log10 of the hydrogen ion concentration. what is the ph of pure water?
The logarithmic value of the hydrogen ion activity's opposite is the pH value. Since hydrogen ion concentrations are frequently very low, ion activity is seen as being equal to hydrogen ion concentrations. The hydrogen ion concentration is then the inverse logarithm of the pH.
What pH is related to hydrogen ion concentration?Since hydrogen ion concentrations are frequently very low, ion activity is seen as being equal to hydrogen ion concentrations.
The pH level is the opposite of hydrogen ion activity. Ion activity is thought to be equal to hydrogen ion concentrations because hydrogen ion concentrations are frequently quite low.
Therefore, The hydrogen ion concentration is then the inverse logarithm of the pH. pH = –log10[a H+] the activity. The acidity increases with increasing concentration.
Learn more about pH here:
https://brainly.com/question/491373
#SPJ4
What type of bond is H2O and CO2?
The bond in water (H2O) and CO2 is a covalent bond. A covalent bond is a type of chemical bond that forms when two atoms share electrons.
In the case of water, the two hydrogen atoms share electrons with the oxygen atom to form a covalent bond. The bond in carbon dioxide (CO2) is also a covalent bond. In CO2, the carbon atom shares electrons with two oxygen atoms to form a covalent bond. Covalent bonds are typically formed between nonmetal atoms, and they are relatively stable and strong bonds. Covalent compounds, like H2O and CO2, are typically gases, liquids, or solids at room temperature, and they have low melting and boiling points. It's important to note that covalent compounds can also exist in different forms, like H2O can exist as a solid, liquid, or gas depending on the temperature and pressure, and CO2 can exist as a solid, liquid, or gas as well.
To know more about CO2 please refer: https://brainly.com/question/15469104
#SPJ4
the molecular mass of a compound is 88 g and has the percent composition 54.5%c, 9.15%h, and 36.3%o. what is the molecular formula of this compound?
The molecular mass of a compound is 88 g and has the percent composition 54.5%C, 9.15%H, and 36.3% O. The molecular formula of this compound would be C₄H₈O₂
To begin with, we can use the relation to get the number of moles (n) of each component.
we asume 100 % = 100 grams
moles = mass/atomic mass,
mol C = mass/(atomic mass) = (54.5 g)/(12.0 g/mol) = 4.54 mol.
mol H = mass/(atomic mass) = (9.15 g)/(1.0 g/mol) = 9.15 mol.
mol O = mass/(atomic mass) = (36.3 g)/(16.0 g/mol) = 2.26 mol.
The empirical formula is obtained by dividing by the smallest number of moles (2.26 mol) of oxygen:
C: H: O = (4.54 mol/2.26 mol) : (9.3 mol/2.26 mol) : (2.26 mol/2.26 mol) = 2: 4: 1.
Empirical formula mass of (C₂H₄O) = 2(atomic mass of C) + 4(atomic mass of H) + 1(atomic mass of O)
= 2(12.0 g/mol) + 4(1.0 g/mol) + (16.0 g/mol) = 44.0 g/mol.
Number of times empirical mass goes into molecular mass = (88.0 g/mol)/(44.0 g/mol) = 2.0 times.
The molecular formula is, 2(C₂H₄O) = C₄H₈O₂
learn more about molecular formula at https://brainly.com/question/20274712
#SPJ4
How many moles of carbon atoms are in 1 mole of CO2?
One mole of CO₂ contains 6.022 x 10²³ of the substance's elementary entities. This number is popularly known as the Avogadro's number (NA). It represents the number of atoms and molecules present in one mole of a substance.
Moles are also defined as quantities that cannot be quantified using units such as grams or milligrams. Thus, a mole is the number of atoms, ions, or molecules. One mole of Carbon dioxide contains one mole of Carbon and one mole of oxygen.
Carbon (s) + Oxygen (g) = CO₂ (g)
One mole of Carbon contains 6.022 x 10²³ atoms.One mole of Oxygen contains 6.022 x 10²³ atoms.One mole of CO₂ contains 6.022 x 10²³ molecules.Learn more about atoms and molecules here:
https://brainly.com/question/7013021
#SPJ4
Is a fruit orchard a nonrenewable energy source?
No fruit orchard is not a source of non-renewable energy.
Oil, natural gas, coal, and nuclear energy are the four main categories of nonrenewable energy. Fossil fuels are a term that refers to coal, natural gas, and oil combined. The term "fossil fuels" refers to the fossilised remains of plants and animals that were formed deep within the Earth over millions of years. Non-renewable resources are those that cannot be immediately replenished after being used up. Fossil fuels like coal, oil, and natural gas are examples of non-renewable resources, as are rare minerals that are typically found in meteorites. The sources of non-renewable energy will deplete or not be replenished within our lifetimes, or even within many, many lifetimes. Coal, oil, and natural gas are the main fossil fuels used as non-renewable energy sources. The primary component of fossil fuels is carbon.
To learn more about energy click here:
https://brainly.com/question/5144470
#SPJ4
what type of bond is Uranium and Iodine?
Covalent type of bond is formed between Uranium and Iodine atoms.
Does iodine bond with uranium?Iodine unites readily with most metals and some nonmetals to form iodides; for sample, silver, and aluminum easily change into their respective iodides, It is a salt of uranium in an oxidation shape+4, and iodine and white phosphorus unites gladly with iodine. The iodide ion is a strong reducing agent; that is, it willingly gives up one electron.
Uranium is a corresponding reactive element. It is together with nonmetals such as oxygen, sulfur, chlorine, fluorine, iodide phosphorus, and bromine. It also dissolves in acids and behaves with water. It forms many blends that tend to have yellowish or greenish colors.
So we can conclude that uranium has thirty-seven different isotopes, involving uranium-235 and uranium-238. of iodine
Learn more about iodine here: https://brainly.com/question/2064871
#SPJ1
How do you write 1 mole?
We write 1 Mole as equal to 6.02214076×10^23 elementary entities. Hence, 1 mole of any substance is equal to 6.022×10^23 units.
What is Mole?The International System of Units uses the term mole (symbol: mol) as the unit of material quantity. How many elementary entities of a particular substance are present in an object or sample is determined by the quantity of that material. It is specified that the mole contains exactly 6.02214076 *1023 elementary entities.Elementary entities:A particle or specific set of particles may be an atom, a molecule, an ion, an electron, or any other elementary entity. Based on a specified, the mole's definition has been updated. number of fundamental components, usually atoms or molecules, and is independent of the definition of the.
To know more about Mole visit
https://brainly.com/question/26416088
#SPJ4
How do you combine oxidation and reduction half reactions?
Oxidation–reduction (redox) reactions involve a transfer of electrons between two chemical species. To combine the two half-reactions, the number of electrons must be balanced.
This is done by multiplying the number of electrons in the oxidation half-reaction by a factor, so that it is equal to the number of electrons in the reduction half-reaction. The factor is then multiplied by the coefficients of the chemical species involved in the reaction.
The products from each half-reaction are then combined, and any spectator ions (ions that are not involved in the reaction) are removed. The overall equation for the reaction can then be written.
Learn more about Oxidation–reduction:
https://brainly.com/question/21851295
#SPJ4
urea is used as a chemical fertilizer. is it an organic or inorganic compound?
The urea is used as a chemical fertilizer and it is an organic compound. The chemical formula is CO(NH₂)₂.
The urea is an organic compound. The urea is also called as carbamide. The chemical formula for the urea is CO(NH₂)₂. The two amino group of amide is -NH₂ joined by the carbonyl group -C=O. It is the simplest carbamic acid. The urea is the waste product of the living organism. Urea is the major component of the urine of human. The urea belongs to the organic compounds known as ureas.
Thus, the Urea is an organic compound and uses as a chemical fertilizer.
To learn more about urea here
https://brainly.com/question/12984032
#SPJ4
The lattice energy of CsOH is -724 kJ/mol, and the enthalpy of hydration of one mole of gaseous Cs+ and one mole of gaseous OH- ions is -796 kJ/mol. Calculate the enthalpy of solution per mole of solid CsOH.
The enthalpy of solution per mole of [tex]$\mathrm{NaCl}$[/tex] is [tex]$+3 \mathrm{~kJ}$[/tex].
What is Enthalpy of Solution?When a specific amount of a solute dissolves in a specific amount of solvent at constant pressure, heat is either emitted or absorbed, and this is known as the enthalpy of solution (H soln). The measurement of energy in a thermodynamic system is called enthalpy. The amount of enthalpy is the entire amount of heat contained in a system, which is equal to the sum of the system's internal energy and the product of volume and pressure.It is possible to think of the generation of aqueous ions from a solid as the breakage of its crystal lattice followed by hydration. If the Born-Haber cycle is used to determine the other two processes, the enthalpy of any one of the three processes can be determined.Lattice energy (NaCl solid) = -786 kJ/mol
Hydration enthalpy (sodium and chloride ions) = -783 kJ/mol
The Born-Haber cycle for NaCl dissolution can be given as follows:
Where,
[tex]- $\Delta_{\text {soln }} \mathrm{H}$[/tex] - solution enthalpy-energy changes when[tex]$1 \mathrm{~mol}$[/tex]solid salt is converted to corresponding aqueous ions.
[tex]- $\mathrm{U}_1$[/tex]- lattice energy- energy released during solid lattice formation (negative of lattice energy is taken because here, the lattice is ruptured).
[tex]- $\Delta_{\text {hyd }} \mathrm{H}$[/tex] - hydration enthalpy- energy changes when gaseous ions of a solid salt are hydrated.
The formation of aqueous sodium and chloride ions from [tex]$\mathrm{NaCl}(\mathrm{s})$[/tex]involves the rupture of lattice and hydration. Therefore,
[tex]$$\Delta_{\text {soln }} \mathrm{H}(\mathrm{NaCl})=-\mathrm{U}_1(\mathrm{NaCl})+\Delta_{\mathrm{hyd}} \mathrm{H}\left(\mathrm{Na}^{+}\right)+\Delta_{\mathrm{hyd}} \mathrm{H}\left(\mathrm{Cl}^{-}\right)$$[/tex]
The hydration energy of sodium and chloride ions together is given as [tex]$-783 \mathrm{~kJ} / \mathrm{mol}$[/tex], and the[tex]$\mathrm{NaCl}$[/tex] lattice energy is [tex]$-786 \mathrm{~kJ} / \mathrm{mol}$[/tex].
Therefore,
[tex]\Delta_{\text {soln }} \mathrm{H} & =-(-786 \mathrm{~kJ} / \mathrm{mol})+(-783 \mathrm{~kJ} / \mathrm{mol}) \\& =+3 \mathrm{~kJ} / \mathrm{mol}[/tex]
Hence, the enthalpy of solution per mole of [tex]$\mathrm{NaCl}$[/tex] is [tex]$+3 \mathrm{~kJ}$[/tex].
The complete question is,
The lattice energy of[tex]$\mathrm{NaCl}$ is $-786 \mathrm{~kJ} / \mathrm{mol}$[/tex], and the enthalpy of hydration of 1 mole of gaseous [tex]$\mathrm{Na}^{+}$[/tex]and 1 mole of gaseous [tex]$\mathrm{Cl}^{-}$[/tex]ions is[tex]$-783 \mathrm{~kJ} / \mathrm{mol}$[/tex]. Calculate the enthalpy of solution per mole of solid [tex]$\mathrm{NaCl}$[/tex].
To learn more about Enthalpy of Solution refer to:
https://brainly.com/question/26954829
#SPJ1
if 4.00 ml m l of vinegar needs 43.5 ml m l of 0.150 m m naoh n a o h to reach the equivalence point in a titration, how many grams of acetic acid are in a 1.30 qt q t sample of this vinegar?
If 4.00 mL of vinegar needs 43.5 mL of 0.150 m NaOH to reach the equivalence point in a titration, The grams of the acetic acid is 119.9 g.
Given that :
The molarity of NaOH = 0.150 M
The volume of NaOH = 43.5 mL = 0.0435 L
The moles = molarity × volume
= 0.150 × 0.0435
= 0.0065 mol
At equivalence point ,
Moles of CH₃COOH = moles of NaOH
The molarity of the CH₃COOH = moles / volume
= 0.0065 / 0.004
= 1.625 mol
Volume of CH₃COOH = 1.50 × 0.946353
= 1.230 L
The mass of the Acetic acid = 1.625 × 1.230 × 60
= 119.9 g
To learn more about equivalence point here
https://brainly.com/question/29033775
#SPJ4
What type of reaction is o2 o3?
The reaction between oxygen (O2) and ozone (O3) is an oxidation-reduction reaction. It also know by the name of redox reactions.
In this reaction, O2 is oxidized, meaning it loses electrons and becomes O3. O3, on the other hand, is reduced, meaning it gains electrons and becomes O2. The electrons are transferred from O2 to O3, and this transfer of electrons is what makes this a redox reaction.
The general equation for this reaction is:
O2 + hv → O3
The "hv" in this equation represents the energy from light, typically from the sun, that causes the oxygen molecule to dissociate, or break apart, and form ozone. The reaction is not a simple one, as O3 is formed from O2 in the presence of UV radiation, and O3 can be converted back to O2 by different ways, such as chemical reactions or photodissociation by UV radiation. It is important to note that O3 is an important component of the Earth's atmosphere because it acts as a shield against harmful ultraviolet radiation from the sun. However, when O3 is present in high concentrations in the lower atmosphere, it can be harmful to human health and the environment.
To know more about O3 please refer: https://brainly.com/question/30077103
#SPJ4
Can anyone help me please?!!
A.) Come plate and balance the following double displacement reaction. Make sure to include the states of the products
LiOH(aq) + MgCl(aq) -> ? + ?
B.) write the net ionic equation for the above reaction
Net ionic equation is 2LiOH(aq)+MgCl2(aq)
What is double displacement reaction?A double displacement is a reaction in which the positive and negative ions of two ionic compounds exchange places to form two new compounds. The double-displacement reaction generally takes the form of AB + CD → AD + CB where A and C are positively-charged cations, while B and D are negatively-charged anionsA kind of reaction called a double displacement reaction involves the exchange of ions between two reactants to create two new molecules. Ionic chemicals that are dissolved in water undergo several double displacement reactions with one another.A double-displacement reaction occurs when the positive and negative ions of two ionic compounds switch places to form two entirely new compounds in an aqueous solution. These compounds can come in the form of precipitates, gasses, or molecular compounds.To learn more about double displacement reaction refers to:
brainly.com/question/26413416
#SPJ1
In which type of reaction do two simple elements combine together to form a more complex compound?
A more complex chemical is produced when two simple components are combined in a direct combination reaction or synthesis process. These chemical reactions are among the most frequent ones.
When two or more chemical species combine in a synthesis reaction, the result is A + B => AB. This form makes it easy to spot synthesis reactions because there are more reactants than products. A more complex chemical is produced when two simple components are combined in a direct combination reaction or synthesis process. From the food our bodies digest to the way the sunlight we receive is created, chemical processes occur all around us. Understanding physical and chemical changes is essential before beginning chemical processes.
Learn more about chemical reactions here
https://brainly.com/question/29039149
#SPJ4
What is the ph of an aqueous solution of 300 mm hcl?
The pH of an aqueous solution of 300mM HCl is 0.52. To solve for pH, we first need to:
convert the concentration of HCl to molar (M) instead of millimolar (mM) by dividing the millimolar concentration by 1000.
300mM (1M / 1000mM) = 0.3M
2. Now, we can use this value as the concentration in the equation for pH:
pH=−log[H+]
pH=−log[0.3]=0.52
3. Thus, the pH of this solution is 0.52, making it very acidic.
What is pHpH (Potential of Hydrogen) is the degree of acidity which is used to express the level of acidity or alkalinity of a solution. It is defined as the collarithm of the activity of dissolved hydrogen ions (H+). The hydrogen ion activity coefficient cannot be measured experimentally, so its value is based on theoretical calculations. The pH scale is not an absolute scale. It is relative to a set of standard solutions whose pH is determined based on international agreements.[1]
Learn more about pH at https://brainly.com/question/15289741.
#SPJ4
Determine the molecular formula of a compound with an empirical formula of NH2 and a molar mass of 32.06 g/mol.
The molecular formula of the compound is N2H4
What is the molecular formula?A molecular formula is a concise way of expressing the composition of a molecule, representing the number and type of atoms present in it. It shows the type of elements present in a molecule and the ratio of atoms of each element. The molecular formula is represented as symbols of the constituent elements with subscripts to indicate the number of each type of atom.
No we know that;
[14 + 2(1)]n = 32
n = 32/16
n = 2
The molecular formula of the compound is N2H4
Learn more about molecular formula:https://brainly.com/question/28647690
#SPJ1
rank the boxes in order of decreasing magnitude of the force static friction between them and the surface.
The static friction is the type of the friction in which it keeps an object at rest. Like paper on a table.
The friction is the force that resist the motion. The types of friction is given as:
Lubricated frictionFluid friction Static friction Skin frictionInternal frictionKinetic frictionWhen an individual try to move the stationary object on the surface and without triggering the relative motion between the surface and the body. The examples of the static friction is given as :
1) Paper on table
2) A towel hanging on rack
3) A car parked on hall
4) book mark in book
The question is incomplete, I gave the general answer according to my knowledge.
To learn more about static friction here
https://brainly.com/question/13657707
#SPJ4