What is the mole fraction of urea, CO(NH2)2, in a solution prepared by dissolving 4.0 g of urea in 32.0 g of methanol, CH3OH

Answer:

The correct answer is CaO > LiBr > KI.

Explanation:

Lattice energy is directly proportional to the charge and is inversely proportional to the size. The compound LiBr comprises Li+ and Br- ions, KI comprises K+ and I- ions, and CaO comprise Ca²⁺ and O²⁻ ions.  

With the increase in the charge, there will be an increase in lattice energy. In the given case, the lattice energy of CaO will be the highest due to the presence of +2 and -2 ions. K⁺ ions are larger than Li⁺ ion, and I⁻ ions are larger than Br⁻ ion.  

The distance between Li⁺ and Br⁻ ions in LiBr is less in comparison to the distance between K⁺ and I⁻ ions in KI. As a consequence, the lattice energy of LiBr is greater than KI. Therefore, CaO exhibits the largest lattice energy, while KI the smallest.  

Arranging the chemical compounds in order of decreasing magnitude of lattice energy, we have:

c. CaO.

a. LiBr

b. KI

Lattice energy can be defined as a measure of the energy required to dissociate one (1) mole of an ionic compound into its constituent anions and cations, in the gaseous state.

Hence, it is typically used to measure the bond strength of ionic compounds.

Generally, lattice energy is inversely proportional to the size of the ions and directly proportional to their electric charges.

Lithium bromide (LiBr) comprises the following ions:

Potassium iodide (KI) comprises the following ions:

Calcium oxide (CaO) comprises the following ions:

From the above, we can deduce that there is an increase in the charge possessed by the ionic chemical compounds and as such this would result in an increase in the lattice energy.

In order of decreasing magnitude of lattice energy, the chemical compounds are arranged as:

I. CaO.

II. KI.

III. LiBr.

Read more: https://brainly.com/question/24605723

Answer:

Animals whose certain organs closely match those of humans or have similar genetic makeup are used in vaccine tests because the results can closely resemble those same results on humans.

Explanation:

Answer:

they use them to test the effectiveness of the vaccine.

Explanation:

Answer:

a) NH3/NH4Cl (pKa = 9.25)

b) [tex]\frac{[Base]}{[Acid]} =0.708[/tex]

c)

Explanation:

Hello,

a) In this case, for a buffering capacity, if we want to select the best buffer, we should ensure that the buffer's pKa approaches the desired pH, therefore, since the buffer NH3/NH4Cl has a pKa of 9.25 that is very close to the desired pH of 9.10, we can pick it as the best choice.

b) In this case, we use the Henderson-Hasselbach equation in order to compute the molar ratio:

[tex]pH=pKa+log(\frac{[Base]}{[Acid]} )\\\\log(\frac{[Base]}{[Acid]} )=9.10-9.25=-0.15\\\\\frac{[Base]}{[Acid]} =10^{-0.15}\\\\\frac{[Base]}{[Acid]} =0.708[/tex]

c) Finally, for the ratio of masses, we use the molar mass of both ammonia as the base (17 g/mol) and ammonium chloride as the acid (53.45 g/mol) to compute it, assuming 1.00 L as the volume of the solution:

[tex]\frac{m_{Base}}{m_{Acid}} =0.708\frac{molBase}{molAcid}*\frac{17gBase}{1molBase} *\frac{1molAcid}{53.45gAcid}\\ \\\frac{m_{Base}}{m_{Acid}} =0.225[/tex]

Regards.

The best choice to create a buffer with pH 9.10 is NH₃/NH₄Cl (pKa=9.25), ratio of molarities and masses for NH₃/NH₄Cl are 0.708 & 0.225 respectively.

pH of buffer solution will be calculated by using the Henderson Hasselbalch equation as:

pH = pKa + log([base]/[acid])

        log([NH₃]/[NH₄Cl]) = 9.10 - 9.25 =

        log([NH₃]/[NH₄Cl]) = -0.15

       [NH₃]/[NH₄Cl] = [tex]10^{-0.15}[/tex] = 0.708

        M = n/V, where

        M = molarity

        V = volume = 1L

        n = moles = W(mass) / M(molar mass)

        Mass(NH₃)/Mass(NH₄Cl) = 0.708 {(mol of NH₃×17g of NH₃NH₃) /          

                                                              (mol of NH₄Cl×53.45g of NH₄Cl)

       Mass(NH₃)/Mass(NH₄Cl) = 0.225

Hence required values are calculated above.

To know more about Henderson Hasselbalch equation, visit the below link:
https://brainly.com/question/13651361

Answer:

0.0002949 moles

Explanation:

Concentration = 2.02×10−2 M

Volume = 14.6 mL = 0.0146 L (Upon converting to litres)

Number of moles = ?

These variables are related by the fllowing equation;

Concentration = Number of moles / Volume

Number of moles = Concentration * Volume

Number of moles = 2.02×10−2 * 0.0146 = 0.0002949 moles

Answer:

there is one atom of oxygen and two atoms of hydrogen

Explanation:

Answer:

pH = 13.7

Explanation:

A strong acid (HCl) reacts with a strong base Sr(OH)₂ producing water and a salt, thus:

2HCl + Sr(OH)₂ → 2H₂O + SrCl₂

To solve this problem, we need to find initial moles of both reactants and, with the chemical equation find limiting reactant and moles in excess to find pH as follows:

The initial moles of HCl and Sr(OH)₂ are:

100mL = 0.1L ₓ (1.0mol / L) = 0.100 moles of both HCl and Sr(OH)₂

As 2 moles of HCl reacts per mole of Sr(OH)₂, moles of Sr(OH)₂ that reacts with 0.100 moles of HCl are:

0.100 moles HCl ₓ (1 mol Sr(OH)₂ / 2 mol HCl) = 0.050 moles Sr(OH)₂

That means HCl is limiting reactant and after reaction will remain in solution:

0.100 mol - 0.050mol =

0.050 moles of Sr(OH)₂

Find pH:

1 mole of Sr(OH)₂ contains 2 moles of OH⁻, 0.050 moles contains 0.050×2 = 0.100 moles of OH⁻. In 200mL = 0.2L:, molar concentration of OH⁻ is:

0.100 moles / 0.2L =

[OH⁻] = 0.5M

As pOH of a solution is -log[OH⁻],

pOH = -log 0.5M

pOH = 0.301

And knowing:

pH = 14 - pOH

pH = 14 - 0.301

Answer:

Matter can neither be created nor destroyed

Explanation:

Mark me. as brainliest

Answer: 1.2 millimoles will be left after 2250 years

Explanation:

Expression for rate law for first order kinetics is given by:

[tex]t=\frac{2.303}{k}\log\frac{a}{a-x}[/tex]

where,

k = rate constant

t = age of sample

a = let initial amount of the reactant

a - x = amount left after decay process  

a) for completion of half life:

Half life is the amount of time taken by a radioactive material to decay to half of its original value.

[tex]t_{\frac{1}{2}}=\frac{0.693}{k}[/tex]

[tex]k=\frac{0.693}{5730}=0.00012years^{-1}[/tex]

b) Amount left after 2250 years

[tex]2250=\frac{2.303}{k}\log\frac{1.6}{a-x}[/tex]

[tex]2250=\frac{2.303}{0.00012}\log\frac{1.6}{a-x}[/tex]

[tex]\log\frac{1.6}{a-x}=0.117[/tex]

[tex]\frac{1.6}{a-x}=1.31[/tex]

[tex]{a-x}=\frac{1.6}{1.31}=1.2[/tex]

Thus 1.2 millimoles will be left after 2250 years

Answer:

Explanation:

The ionic lattices would have the highest melting point Potassium oxide. option A is correct.

An ionic compound is a giant structure of ions. The ions have a regular, repeating arrangement called an ionic lattice. The lattice is formed because the ions attract each other and form a regular pattern with oppositely charged ions next to each other.

Ionic compounds are held together by electrostatic forces between oppositely charged ions.

These forces are usually referred to as the ionic lattice contains such a large number of ions, that a lot of energy is needed to overcome this ionic bonding so ionic compounds have high melting and boiling points.

therefore, sodium oxide has the highest melting point. option A is correct

Learn more about ionic lattice here:

https://brainly.com/question/27549049

#SPJ2

Answer:

d. HF(g)

Explanation:

Hello,

In this case, the standard entropy S° could be predicted by looking at the amount of bonds the compound has, thus, the fewer the number bonds, the lower the standard entropy, it means that d. HF(g) has lowest value as it has one bond only whereas methane has four bonds, water two bonds and ammonia three bonds.

Best regards.

Answer:

True

Explanation:

The percentage by mass of a substance in a solution can be calculated by dividing the mass of the substance dissolved in the solution by the total mass of the solution. This can be expressed mathematically as:

Percentage by mass = mass of substance in solution/mass of solution x 100

In this case;

mass of KBr = 4.34 grams

mass of water = 17.4 grams

mass of solution = mass of KBr + mass of water = 4.34 + 17.4 = 21.74

Percentage by mass of KBr = 4.34/21.74 x 100

                                              = 19.96 %

19.96 is approximately 20%.

Hence, the statement is true.

The correct answer is C. square planar

According to the Valence Shell Electron Pair Repulsion Theory(VSEPR), The shape of a molecule depends on the number of electron pairs in the molecule.

VSEPR theory was first coined by Gillespie  and Nyhlom in 1957 as an improvement over the Sidgwick - Powell theory.

According to this theory, the shape of a molecule is determined by the number of electron pairs that surround the valence shell of the central atom in the molecule.  The electron pairs are positioned as far apart in space as possible to minimize repulsion of electron pairs.

However, the presence of lone pairs distorts the shape anticipated for the molecule on the basis of VSEPR.

For a molecule having six electron pairs, an octahedral geometry is expected(electron domain geometry). However, the presence of two lone pairs which are positioned at opposite side of the four single bonds leads to an observed square planar molecular geometry.

https://brainly.com/question/13591921

Answer:

square planar

Explanation:

Answer:

30.12 mL.

Explanation:

We'll begin by calculating the molarity of the phosphoric acid. This can be obtained as follow:

Phosphoric acid H3PO4 will dissociate in water as follow:

H3PO4(aq) <==> 3H^2+(aq) + PO4^3-(aq)

From the balanced equation above,

1 mole of H3PO4 produces 3 moles of H+.

Therefore, XM H3PO4 will produce 8.70 M H+ i.e

XM H3PO4 = 8.70/3

XM H3PO4 = 2.9 M.

Therefore, the molarity of the acid solution, H3PO4 is 2.9 M.

Next, we shall write the balanced equation for the reaction. This is illustrated below:

2H3PO4 + 3Ba(OH)2 —> Ba3(PO4)2 + 6H2O

From the balanced equation above, we obtained the following:

Mole ratio of the acid, H3PO4 (nA) = 2

Mole ratio of the base, Ba(OH)2 (nB) = 3

Data obtained from the question include the following:

Molarity of base, Ba(OH)2 (Mb) = 6.50 M

Volume of base, Ba(OH)2 (Vb) =.?

Molarity of acid, H3PO4 (Ma) = 2.9 M

Volume of acid, H3PO4 (Va) = 45 mL

The volume of the base, Ba(OH)2 Needed for the reaction can be obtained as follow:

MaVa /MbVb = nA/nB

2.9 x 45 / 6.5 x Vb = 2/3

Cross multiply

2 x 6.5 x Vb = 2.9 x 45 x 3

Divide both side by 2 x 6.5

Vb = (2.9 x 45 x 3) /(2 x 6.5)

Vb = 30.12 mL

Therefore, the volume of the base, Ba(OH)2 needed for the reaction is 30.12 mL

Answer:

there are 37,8541 liters in 10 gallons

Answer:

The correct answer is 2.2 mL.

Explanation:

Given:

Average: 2.9 mL

SD: 0.71 mL

We can define a 1 SD range in which the value of volume (in mL) will be comprised:

Volume (mL) = Average ± SD = (2.9 ± 0.7) mL

Maximum value= Average + SD= 2.9 + 0.7 mL = 3.6 mL

Minimum value= Average - SD = 2.9 - 0.7 mL = 2.2 mL

Thus, the minimum value within a 1 SD range of the average is 2.2 mL

The minimum value within 1 SD is 2.19 mL

The z score is used to determine by how many standard deviations the raw score is above or below the mean. The z score is given by:

[tex]z=\frac{x-\mu}{\sigma} \\\\where\ x\ is\ raw\ score, \mu=mean,\sigma=standard\ deviation[/tex]

Given that μ = 2.9 mL, σ = 0.71 mL; hence:

The minimum value within 1 SD range = μ ± σ = 2.9 ± 0.71 = (2.19, 3.61)

Therefore the minimum value within 1 SD is 2.19 mL

Find out more at: https://brainly.com/question/23907081

Answer:

Gay lussacs law

Explanation:

Answer:

Reaction of Chlorine with Hydrogen Chlorine and Hydrogen mixed together explodes when exposed to sunlight, which produces Hydrogen Chloride. In the dark away from sunlight, no reaction occurs, so light energy is required for a reaction. Cl2 + H2 = 2 HCl Reaction of Chlorine with Non-Metals Chlorine directly combines with most non-metals.

Explanation:

I hope this helps bro

Answer:

Number of mole in Oxygen = 2.24 mol

Explanation:

Given:

Amount of carbon dioxide (CO₂) = 49.2 gram

Find:

Number of moles in Oxygen

Computation:

Molecular weight of CO₂ = 44 gram (Approx)

Number of mole in CO₂ = 49.2 / 44

Number of mole in CO₂ = 1.11818182 mol

CO₂ has 2 mole of Oxygen,

So,

Number of mole in Oxygen = 2 × 1.11818182

Number of mole in Oxygen = 2.23636364

Number of mole in Oxygen = 2.24 mol

Answer:

Bakelite is a polymer made up of the monomers phenol and formaldehyde. This phenol-formaldehyde resin is a thermosetting polymer.

Answer: The monomers of bakelite are formaldehyde and phenol

Explanation:

Answer:

D. Baking bread

Explanation:

In this process, energy is absorbed and in an endothermic process energy is absorbed too.

Baking bread is an example of an endothermic process, therefore option (d) is correct .

Endothermic reactions are chemical processes in which the reactants absorb heat from the environment to produce products.

An endothermic reaction is  accompanied by an absorption of heat.

Endothermic  reactions cause a cooling effect by lowering the temperature of the surrounding environment.

A decrease in temperature can be observed with the progression of the reaction. The reaction is non-spontaneous in endothermic reactions .

Baking bread is an example of an endothermic process, hence  option (d) is correct .

Learn more about endothermic process ,here:

https://brainly.com/question/23184814

#SPJ5

Answer:

C.

Explanation:

In warm air, stuff expands, and in cold air, things condense, or decrease in size.

Answer:

The correct answer is 1) 56 ml and 2) 0.314 M

Explanation:

1. The reaction taking place in the given case is,  

HClO₃ + KOH ⇒ KClO₃ + H2O, the molarity of HClO₃ given is 0.100 M, the molarity of KOH given is 0.140 M and the volume of KOH given is 40 ml, there is a need to find the volume of HClO₃.  

Therefore, the mole of HClO₃ = mole of KOH

= MHClO₃ × VHClO₃ = MKOH × VKOH

= 0.100 M × VHClO₃ = 0.140 M × 40 ml

VHClO₃ = 0.140 M × 40 ml/0.100 M

VHClO₃ = 56 ml.  

2. The reaction taking place is,  

2HNO₃ + Ba(OH)₂ ⇒ Ba(NO₃)₂ + 2H₂O

The volume of HNO₃ given is 25 ml, the molarity of Ba(OH)2 is 0.250 M, the volume of Ba(OH)2 is 15.7 ml, the n or the number of moles of HNO₃ is 2, and the n of Ba(OH)2 is 1, the concentration or M of HNO₃ is,  

M₁V₁/n₁ = M₂V₂/n₂

M₁ × 25/ 2 = 0.25 × 15.7/1

M₁ or molarity of HNO₃ = 0.314 M

1. The volume of HClO₃ required to neutralize the KOH is 56.0 mL

2. The concentration of the original HNO₃ solution is 0.314 M

1.

First, we will write a balanced chemical equation for the reaction

The balanced chemical equation for the reaction is

HClO₃ + KOH → KClO₃ + H₂O

This means,

1 mole of HClO₃ is required to neutralize 1 mole of KOH

From the titration formula

[tex]\frac{C_{A}V_{A} }{C_{B}V_{B}} = \frac{n_{A}}{n_{B}}[/tex]

Where

[tex]C_{A}[/tex] is the concentration of acid

[tex]C_{B}[/tex] is the concentration of base

[tex]V_{A}[/tex] is the volume of acid

[tex]V_{B}[/tex] is the volume of base

[tex]n_{A}[/tex] is the mole ratio of acid

[tex]n_{B}[/tex] is the mole ratio of base

From the given information,

[tex]C_{A} = 0.100 \ M[/tex]

[tex]C_{B} = 0.140 \ M[/tex]

[tex]V_{B} = 40.0 \ mL[/tex]

From the balanced chemical equation

[tex]n_{A} = 1[/tex]

[tex]n_{B} =1[/tex]

Putting the values into the formula, we get

[tex]\frac{0.100 \times V_{A} }{0.140 \times 40.0} = \frac{1}{1}[/tex]

∴ [tex]0.100 \times V_{A} = 0.140 \times 40.0[/tex]

[tex]V_{A}=\frac{0.140\times 40.0}{0.100}[/tex]

[tex]V_{A}=\frac{5.60}{0.100}[/tex]

[tex]V_{A}=56.0 \ mL[/tex]

Hence, the volume of HClO₃ required to neutralize the KOH is 56.0 mL

2.

First, we will write the balanced chemical equation for the reaction

The balanced chemical equation for the reaction is

2HNO₃ + Ba(OH)₂ → Ba(NO₃)₂ + 2H₂O

This means, 2 mole of HNO₃ is required to neutralize 1 mole Ba(OH)₂  

From the given information,

[tex]V_{A} = 25.0\ mL[/tex]

[tex]C_{B} = 0.250 \ M[/tex]

[tex]V_{B} = 15.7 \ mL[/tex]

From the balanced chemical equation

[tex]n_{A} = 2[/tex]

[tex]n_{B} =1[/tex]

Also, Using the titration formula

[tex]\frac{C_{A}V_{A} }{C_{B}V_{B}} = \frac{n_{A}}{n_{B}}[/tex]

We get

[tex]\frac{C_{A} \times 25.0 }{0.250 \times 15.7} = \frac{2}{1}[/tex]

Then,

[tex]C_{A} = \frac{2\times 0.250 \times 15.7} {1 \times 25.0}[/tex]

[tex]C_{A} =\frac{7.85}{25.0}[/tex]

[tex]C_{A} =0.314 \ M[/tex]

Hence, the concentration of the original HNO₃ solution is 0.314 M

Learn more here: https://brainly.com/question/16870772

Answer:

A. as an agglomeration metal

B. as a native metal

D. in sulfide ore minerals

Explanation:

Copper is a metal with symbol Cu and atomic number 29. It has a pinkish-orange color and is malleable, ductile and has a high thermal and electrical conductivity. This is why it is often used in electrical appliances.

Copper exists as an agglomeration metal, as a native metal or in sulfide ore minerals such as Cu2S.

The examples of copper deposits are  agglomeration metal, as a native metal or in sulfide ore minerals. Option A, B, and D are correct.

Copper is a metal with high thermal and electrical conductivity. hence, it is often used in electrical appliances.

Copper found as an agglomeration metal, as a native metal or in sulfide ore minerals such as [tex]\bold { Cu_2S.}[/tex]

Therefore, the examples of copper deposits are  agglomeration metal, as a native metal or in sulfide ore minerals. Option A, B, and D are correct.

To know more about agglomeration metal,

https://brainly.com/question/17191919

Answer:

[Ag⁺] = 5.0x10⁻¹⁴M

Explanation:

The product solubility constant, Ksp, of the insoluble salts PbI₂ and AgI is defined as follows:

Ksp(PbI₂) = [Pb²⁺] [I⁻]² = 1.4x10⁻⁸

Ksp(AgI) = [Ag⁺] [I⁻] = 8.3x10⁻¹⁷

The PbI₂ just begin to precipitate when the product  [Pb²⁺] [I⁻]² = 1.4x10⁻⁸

As the initial [Pb²⁺] = 0.0050M:

[Pb²⁺] [I⁻]² = 1.4x10⁻⁸

[0.0050] [I⁻]² = 1.4x10⁻⁸

[I⁻]² = 1.4x10⁻⁸ / 0.0050

[I⁻]² = 2.8x10⁻⁶

So, as the [I⁻] concentration is also in the expression of Ksp of AgI and you know concentration in solution of I⁻ = 1.67x10⁻³M:

[Ag⁺] [I⁻] = 8.3x10⁻¹⁷

[Ag⁺] [1.67x10⁻³] = 8.3x10⁻¹⁷

Answer:

The correct answer is : option D. The test was inconclusive because he forgot to add heat.

Explanation:

Benedict's test is a test that is used to confirm the presence of the simple carbohydrates (mono saccharides and some disaccharides). It is a reagent made by mixture of solution of CuSO4 with sodium citrate and Na2CO3.

Benedict's reagent is added to the substance to test and then heated if it turns yellow to orange or red the presence of simple sugar is confirmed.

Thus, the correct answer is : option D. The test was inconclusive because he forgot to add heat.

Answer:

The test was inconclusive because the student forgot to add heat.

Explanation:

If the test revealed it was not glucose, then the student could run these tests. The student, however, does not need these substances to run the glucose test properly.

Answer:

b. the amount of heat given off or absorbed

Explanation:

Hello,

In this case, we should take into account a formal definition of enthalpy change such as an energetic change that occurs in a system when matter is transformed by a given chemical reaction from reactants to products. Thus, such energetic change is macroscopically exhibited and it is related with either a temperature increase or decrease; it means that if a reaction exhibits a temperature increase, we say that heat was given off and if the temperature exhibits a decrease, we say that heat is absorbed. For that reason, answer is b. the amount of heat given off or absorbed.

Regards.

Answer:

length

Explanation:

edge 2020

hope this helps!

Answer:

A.) Density

Explanation:

Correct on edge.

Answer:

The frequency of the photon is 7.41*10¹⁶ Hz

Explanation:

Planck states that light is made up of photons, whose energy is directly proportional to the frequency of radiation, according to a constant of proportionality, h, which is called Planck's constant. This is expressed by:

E = h*v

where E is the energy, h the Planck constant (whose value is 6.63*10⁻³⁴ J.s) and v the frequency (Hz or s⁻¹).

So the frequency will be:

[tex]v=\frac{E}{h}[/tex]

Being E= 4.91*10⁻¹⁷ J and replacing:

[tex]v=\frac{4.91*10^{-17} J}{6.63*10^{-34} J.s}[/tex]

You can get:

v= 7.41*10¹⁶ [tex]\frac{1}{s}[/tex]= 7.41*10¹⁶ Hz

The frequency of the photon is 7.41*10¹⁶ Hz

Answer:

CH4 < CH3CH3 < CH3CH2CH3

Explanation:

Alkanes are saturated aliphatic hydrocarbons that undergoes intermolecular Van der waals forces. Van der waals forces are the attractive forces which make it possible for non-polar molecules to form liquids and solids.

Van der waals force are described as intermolecular forces arising from induced fluctuating dipoles in atoms and molecules brought about by movement of electrons around the atomic nucleus.

An example of the Van der waals force is the  london dispersion force that occurs in the alkane family. It is the weakest of all electrical forces that act between atoms and molecules, These forces are responsible for liquefaction or solidification of non-polar substances at low temperature.

The strength of the intermolecular forces is based on the number of electrons surrounding the molecule and the surface area of the molecule. SO, in alkanes, the longer the carbon chain, the more stronger the intermolecular forces.

Explanation:

the difference between temperature and thermal energy are as follow ,

• The thermal energy, or heat, of an object is obtained by adding up the kinetic energy of all the molecules within it. Temperature is the average kinetic energy of the molecules.