What is the smallest height needed to make a wave?
A.6 feet
B.90 millimeters
C.20 millimeters
D.any height

No, kinetic energy is not always increasing. In some cases, the kinetic energy of an object can decrease or remain constant.

For example, when an object is moving and collides with another object or a surface, the kinetic energy of the object can be transferred to the other object or converted into different energy forms, including sound or heat. As a result, the kinetic energy of the first object can decrease or be completely converted into other forms of energy. Additionally, if an object is moving and is acted upon by an opposing force, such as friction or air resistance, the kinetic energy of the object can decrease as it slows down. If an object is moving at a constant velocity, the kinetic energy of the object will also be constant. So kinetic energy is not always increasing, it can change depending on the forces acting upon an object and the object's motion.

To know more about kinetic energy please refer: https://brainly.com/question/26472013

#SPJ4

The required longest time you can stop for dinner when you travel at 65 mi/h is calculated to be 4.62 hours.

Given that,

Distance travelled is 402 mi in 10.8 h.

Time in which same distance can be travelled with 65 mi/h = ?

We know the speed can be written as,

Speed = Distance/ Time

Speed = 402/10.8 = 37.22 mi/h

The longest time you can stop for dinner when you travel at 65 mi/h is given as,

65 = 402/t

Time t = 402/65 = 6.185 hours

Required time = 10.8 h - 6.185 h = 4.62 h

Thus, the required longest time you can stop for dinner when you travel at 65 mi/h is calculated to be 4.62 hours.

To know more about time:

https://brainly.com/question/10710402

#SPJ4

The solar arrays collect energy from the Sun, generating power for all of Hubble's systems.

All of Hubble's systems are powered by the energy that the solar arrays harvest from the Sun. Each of Hubble's two battery modules holds three batteries. The six batteries have a combined storage capacity of 528 amp-hours, or up to 88 amp-hours per battery. The Hubble Space Telescope depends on electricity to power its scientific equipment, computers, heaters, transmitters, and other electronic gear. Hubble's electrical power system generates, stores, manages, and disperses electrical energy for the whole spaceship in order to meet this need. The solar panels, batteries, power control unit, power distribution unit, and their supporting electronics make up the majority of the electrical power system. Hubble has two solar arrays that resemble wings that gather solar energy and turn it into electricity. Since its 1990 debut, Hubble has had three different configurations of solar arrays.

Learn more about Hubble's systems.

brainly.com/question/29766816

#SPJ4

The complete table are:

Variable Changed : outcome

In regards to the question, It's important to note that these predictions are based on basic physics principles and assumptions, and actual results may vary depending on the specific materials and measurements used in Darnell's bell design.

Additionally, other variables such as the shape and thickness of the bell may also affect the loudness of the ring, so Darnell may want to consider these factors as well when making changes to his design.

Learn more about Variable from

https://brainly.com/question/25223322

#SPJ1

like blade runner and Fahrenheit 451 crossword clue, the answer is: DYSTOPIAN.

Crossword clues are hints that the problem solver must interpret in order to discover the solution, which is subsequently typed into the puzzle grid. Clues can include puns, anagrams, and other wordplay; they don't always contain dictionary definitions.

The benefit of doing a crossword puzzle is that it compels students to go through the clues, remember and review the subject matter, and engage in conversation with their peers to dispel any misunderstandings about the subject matter.

To know more about crossword clue refer to:

https://brainly.com/question/19127865

#SPJ4

The magnitude of (a−b) is 5 units, and the direction is to the north.

What is magnitude?

To learn more about magnitude here

brainly.com/question/29758181

#SPJ4

For full question, refer the image.

The weight of an object and its mass are directly proportional. For a given gravitational field strength, the greater the mass of the object, the greater its weight.

To learn more about gravitational force refers to:

brainly.com/question/72250

#SPJ1

The values of the two charges which are 2.0 cm apart and have a total charge of 30nC are 4×10⁻⁸ C and −1×10^⁻⁸ C.

The electric potential energy between two charged particles is inversely proportional to the separation between the two charges and is proportional to the product of one charge and another. The SI unit of the electric potential energy is Joule.

The electric potential energy V between two point charges p and q are given byV=kpq/r² where k is proportionality constant and its value is k=8.99×x10⁹ N⋅m2/C2, total charge = (p+q=3×10⁻⁸C) and the distance between the two charges, r = 0.02m. We know that V = −180μJ.  Substitute q=(3×10⁻⁸-p) into the above equation, and we have p²−3×10⁻⁸xp−4×10⁻¹⁶=0. Solving for p, we have the charges of 4×10⁻⁸ C and −1×10⁻⁸ C.

For further learning about electric potential energy, follow the link:

https://brainly.com/question/12645463

#SPJ4

In order to call a death a homicide, we must find the following facts to be true, a human being who was once alive is now dead, and, the death was caused by the act of another human being.

If a human being who was once alive is now dead, but the death was not caused by the act of another human being, the death is not a homicide. Although it is not ordinarily difficult to determine that a homicide victim was a human being and was once alive, certain circumstances can complicate the determination.

The criminal law does not recognize fetuses as human beings for purposes of criminal homicide (since the death of a fetus is the subject matter of the law of abortion and feticide).

To know more about homicide here

https://brainly.com/question/6228473

#SPJ4

The speed of the osprey approaching you can be calculated by finding the difference between the frequencies of the two calls and then dividing it by the time it takes for the sound to travel.

The speed of sound is approximately 343 meters per second, so the speed of the osprey can be calculated as follows:

(2300 Hz - 2200 Hz)/(1/343) = 343 m/s.

This means that the osprey is approaching you at a speed of 343 meters per second.

The osprey’s call is a distinct whistle at 2200 Hz which is clearly audible to humans, and this frequency can be used to determine how far away the osprey is from you. The difference between the two calls, 2200 Hz and 2300 Hz, can be used to calculate the speed of the osprey as it dives towards you.

Learn more about The speed of the osprey:

https://brainly.com/question/9357108

#SPJ4

Torque can be calculated using the cross product of Lever Arm and Fy. In terms of math, torque τ = |r| |F| sinθ

In mechanics, they have slightly different meanings but the same meaning in physics. The moment is a static force, whereas the torque is a moving force, even though they both have the same unit, N-m. Torque is utilised when there is rotation, whereas moment is used when there isn't.

The formula for torque is =|r| |F| sinθ = | r | | F | sinθ, where |r| is the size of the lever arm, |F| is the size of the force vector, and is the angle created between the two vectors.

To know more about torque:

https://brainly.com/question/30187142

#SPJ4

Carbohydrates come in three primary forms: sugars (found in fruits, vegetables, and milk), starches (found in some vegetables, such potatoes), and fiber (found in many foods that come from plants, including fruits, vegetables, nuts, seeds, beans, and whole grains)

Starches are a type of complex carbohydrate that can be a source of several vitamins and minerals. Complex carbohydrates are more difficult for the body to metabolize. Therefore, blood sugar levels are maintained and fullness is extended.

Fiber is a good example of a complex carbohydrate. In addition to preventing highs and lows in blood sugar and cholesterol, fiber also helps you feel full for longer.

Sugars are a simple carbohydrate. Your body quickly metabolizes simple carbs. Because of this, there is a rapid increase in blood sugar followed by a sharp decline. Sugary foods can give you a temporary boost of energy, but then they'll likely leave you feeling tired. Naturally occurring sugars can be found in foods including fruit, vegetables, and milk.

To learn more about carbohydrates, click here:

https://brainly.com/question/29775112

#SPJ4

Refresh is the process of reloading an entire page or a portion of a web page. Smart refresh, on the other hand, is a method used to update a web page without having to reload the entire page.

Refresh is the action of updating or renewing something. This can be done in a variety of ways, such as refreshing a web page to show new content, refreshing a computer system to reinstall certain software, or refreshing a database to make sure all information is up to date. Refresh is used to make sure that everything is in the most current state, and can be a great way to make sure all data is accurate.

Refresh It is most commonly used to update content on a web page, usually to ensure that the most current version of the page is displayed. Refresh is often used by web developers to check for any changes made to the page and to ensure that the page is up to date.

Smart refresh, on the other hand, is a method used to update a web page without having to reload the entire page. This method requires the browser to identify and reload only the content that has changed since the last refresh. Smart refresh offers a much faster way to update a web page, as only the necessary changes are downloaded and applied. This can save both time and bandwidth while keeping the page up to date. Smart refresh is also more efficient than a traditional refresh as it reduces the load on the server, allowing for faster loading times.

To know more about refresh click-
https://brainly.com/question/25718868
#SPJ4

The volume of air inside a rubber ball with radius r can be found using the function   radios 5/7 and the function represents the volume of the sphere.

On comparing with the formula of volume of sphere, Radius comes out to be 5/17. A sphere is the set of all points in space equidistant from a given point. This point is called the center of the sphere. A radius of a sphere is a segment from the center to a point on the sphere.

It is known that, V (r) = 4/3π r2

and the total feet is 5/7.

V(r) =  5/7.  = 4/3π r2

Thus, radious will be equal to the 5/7 feet.

A chord of a sphere is a segment whose endpoints are on the sphere. A diameter of a sphere is a chord that contains the center.

To know more about volume here

https://brainly.com/question/463363

#SPJ4

The journey of the chicken takes 30 minutes at a speed of 9.3 miles per hour. It traveled 4.65 miles in this amount of time and at this speed. Choice B is correct as a result.

Speed is a term used in physical science to describe how far a moving body may travel in a given amount of time. It is the ratio of time to distance in mathematics.

It is assumed that the chicken moves at a speed of 9.3 miles per hour (mph). With this speed, a distance may be covered in 30 minutes. 60 minutes make up an hour. So, 30 minutes equals 30/60, or 0.5 hours.

Then the distance is calculated as follows:

distance = speed × time

= 9.3 mph × 0.5 hr

= 4.65 miles.

Hence, the distance covered by the chicken is 4.65 miles.

To know more about speed visit:-

https://brainly.com/question/28224010

#SPJ1

Interstellar medium is a combination of carbon and silicates that are thinly spread in space.

The substance that fills the space between stars is known as the interstellar medium, to put it simply. The interstellar medium is 99% gas, primarily hydrogen, while the remaining 1% is dust. Although the interstellar medium is extremely low in density, it is enormous and expansive in area.

Throughout a galaxy's interstellar space, which is the area between its stars, are clouds of gas and dust. The primordial leftovers from the galaxy's birth, star debris, and the building blocks for upcoming stars and planets can all be found in the interstellar medium.

To know more about Interstellar medium visit :

https://brainly.com/question/29770890

#SPJ4

When each particle is then given an additional charge +Q and their separation is increased to 2d, the force becomes an attractive force of F/4 that acts between the two particles.

Coulomb’s Lаw gives the force of аttrаction or repulsion between two point chаrges. If two-point chаrges q1 аnd q2 аre sepаrаted by а distаnce r then the mаgnitude of the force of repulsion or аttrаction between them is

F = k[tex]\frac{q_{1}.q_{2} }{r^{2} }[/tex] where k =  8.9876 × [tex]10^{9}[/tex] [tex]\frac{N.m^{2} }{C^{2} }[/tex]

This is the mаgnitude of the force which eаch chаrge exerts on the other chаrge (recаll Newton’s 3rd lаw). The symbol k аs used here hаs to do with electricаl forces. If the chаrges q1 аnd q2 аre of the sаme sign (both positive or both negаtive) then the force is mutuаlly repulsive аnd the force on eаch chаrge points аwаy from the other chаrge. If the chаrges аre of opposite signs (one positive, one negаtive) then the force is mutuаlly аttrаctive аnd the force on eаch chаrge points towаrd the other one.

Thus, two charged particles exert an electrostatic force, F, on each other and then each particle is then given an additional charge +Q and their separation is increased to 2d, the force that acts between the two particles is an attractive force of F/4.

Your question is incomplete, but your full question can be seen in the Attachment.

For more information about Coulomb’s Lаw refer to the link:

https://brainly.com/question/506926

#SPJ4

They do switch places, and yes. The northern/southern lights are made by the electric field.

The minimum potential energy that the particle can have is 8J.

Potential energy is energy stored in an object due to its position or configuration. It is energy that is waiting to be released and can be converted into other forms of energy. Examples of potential energy include the energy stored in a compressed spring, the energy of a raised weight, the energy of an object at the top of a hill, and the energy of a charged battery. Potential energy can be converted into kinetic energy, which is the energy of motion.

This is because, for positive values of x,

the smallest value of x = 1.

Thus, when

x = 1, the formula for potential energy,

u of x = 2x + 8/x,

becomes

u of x = 2 × 1 + 8/1 =  8 J

To know more about potential energy click-

brainly.com/question/24933254

#SPJ4

Answer:

Explanation:

Standards are based on observable reproducible natural phenomena is one of the main benefits of having an international system of units (SI). This allows for measurements to be made consistently and accurately across different locations, cultures, and time periods.

Nuclear decay that can be stopped by skin or paper. [FALSE]

Most types of nuclear decay, such as alpha and beta decay, cannot be stopped by skin or paper.

 Radioactive decay is a diverse group of states in which an unstable atomic nucleus emits subatomic particles (radiation particles). Decay occurs in a parent nucleus and produces a daughter nucleus. This is a "random" process (random) so it is difficult to predict the decay of an atom.

The international unit for measuring radioactive decay is the becquerel (Bq). If a radioactive material produces 1 decay event every 1 second, then it is said that the material has a method of 1 Bq. Because in general a sample of radiactive material contains many atoms, 1 becquerel will appear to a low level of activity; The units commonly used are on the order of gigabecquerels.

Learn more about nuclear decay at https://brainly.com/question/12224278.

#SPJ4

The person would suffer a shock in becomes part of an electrical circuit.

When a person becomes part of an electrical circuit, they can suffer a shock if the voltage of the circuit is high enough to cause injury. This occurs when the electrical current passes through the person's body, causing disruption of their normal body functions.

The severity of the shock depends on the amount of current passing through their body and its duration. In some cases, the person may experience temporary or long-term memory loss due to the shock.

When a person becomes part of an electrical circuit, it is important to take proper safety precautions to prevent injury.

Learn more about shock in people:

https://brainly.com/question/9791509

#SPJ4

The traveler will be 50 miles south of his starting point when he reaches the opposite bank.

Velocity is a measure of the rate at which an object moves through space and time. It is expressed in terms of the speed and direction of an object's movement and is typically measured in meters per second (m/s). Velocity can also be used to describe the rate at which a function or process changes over time, such as the velocity of a company's growth or the velocity of a stock price change.

To answer this question, we need to know the starting point, the opposite bank, the velocity of the traveler, and the time it will take to travel from the starting point to the opposite bank. Assuming the traveler is moving at a constant velocity, the distance he will travel will be the velocity multiplied by the travel time.

For example, if the starting point is 0 miles from the opposite bank, and the traveler is moving at a velocity of 50 miles per hour, and it takes him 1 hour to get to the opposite bank, then the distance he will travel is 50 miles. Therefore, the traveler will be 50 miles south of his starting point when he reaches the opposite bank.

To know more about velocity click-
https://brainly.com/question/24445340
#SPJ4

First class and Second class of levers are possible to increase the force by changing its magnitude and direction.

The levers that increase the force are first-class and second-class levers. An example where the first-class lever is applied is to lift a large rock. An example where the second-class lever is used is that of a wheelbarrow. In the case of this wheelbarrow, the fulcrum is the wheel. The wheelbarrow is used to lift and transport a very heavy load.

Lever increases force by decreasing the distance. Hence by increasing the force of a lever, the load gets applied with a huge force than it is actually supplied by the effort. Therefore it becomes much easier to carry very huge loads. In a second-class lever, in between the effort and the fulcrum, the load acts on it. Second-class levers don't change the direction of the force. Both the effort and the load move in the same direction.

For further learning about the lever, refer to the link:

https://brainly.com/question/18937757

#SPJ4

The statement that best describes the future generations of these bacteria is they will be produced by asexual reproduction and will be more resistant to the antibiotic. The correct option is B.

When the body develops a resistance to antibiotics, antibiotic resistance happens.

Because antibiotics are unable to combat bacteria, the bacteria grow and produce illnesses that can result in life-threatening infections, incapacity, or even death.

Therefore, the correct option is B) They will be produced by asexual reproduction and will be more resistant to the antibiotic.

To learn more about resistance, refer to the link:

https://brainly.com/question/10868637

#SPJ1

The scales on the x-axis and y-axis are set to 1 cm = 10, allowing for clear and easy interpretation of the graph. So the value that point more than cumulative ogive will start c. 10.

An ogive, also known as a cumulative frequency curve, is a graph that shows the cumulative frequency of a data set on the y-axis, and the upper limit of each class interval on the x-axis. Frequency refers to the number of times a particular value or set of values appears in a data set. It is a measure of how often something occurs. In statistics, frequency is used to describe the distribution of a set of data and can be represented in a frequency table or a histogram. The frequency of a value can be represented by counting the number of times that value appears in the data set, or by calculating the proportion of the total data set that the value represents.

From the question we are informed that:

Marks 0−10 10−20 20−30 30−40 40−50

Students 6 21 16 32 10

Class interval 0−10 10−20 20−30 30−40 40−50

Frequency 6 21 16 32 10

Cumulative frequency 6 27 43 75 85

The process involves plotting the cumulative frequency against the upper limit of each class interval and joining these points with a smooth curve to create the ogive. The scales on the x-axis and y-axis is 1 cm = 10.

Learn more about frequency, here https://brainly.com/question/5102661

#SPJ4

Mortgage company would be the least likely place for Tom and Mary to obtain a loan.

A mortgage is a loan used to finance the acquisition or upkeep of real estate, vacant land, or other kinds of rental properties. The borrower and lender both agree to repay the loan over a period of time, typically in a series of consistent instalments that are separated into principal and interest. For loans, the property acts as insurance.

Borrowers should submit loan applications to their preferred lenders and meet a number of requirements, such as minimum credit ratings and prepayment history.

Learn more about Mortgage here:

https://brainly.com/question/13447700

#SPJ1

A 2500-lb vehicle has a drag coefficient of 0.31 and a frontal area of 20 ft2, and the minimum tractive effort  = 214.051 lb.

To find the minimum tractive effort,

Vehicle weight  is 2500 lb

Drag coefficient is 0.31

Frontal area 20 ft^2

Vehicle speed is 50 mi/hr = 73.33 ft/sec

Gradient - 5%

Air density = 0.002045 slugs/ft^3

Drag force is a type of fluid force that opposes the motion of an object moving through a fluid (liquid or gas). It is a frictional force that acts in the direction opposite to the velocity of the object.

The magnitude of the drag force depends on several factors, including the velocity of the object, the density of the fluid, the cross-sectional area of the object, and the shape of the object.

In aerodynamics, drag force is a major factor in the design and performance of aircraft, as it can significantly affect the lift-to-drag ratio, fuel efficiency, and overall speed of the aircraft.

Drag force is given as,

Fd = 1/2CdρAV²

=  0.5× 0.31 × 0.002045× 20× 88²

= 49.093 lb.

Force due to vehicle weight,

Fw = 0.01 ( 1+ υ/147)W

= 0.01 ( 1 + 88/147) 2500

= 39.965 lb.

Force due to gradient

Fg = W × g

= 2500 × 0.05

= 125 lb

Minimum tractive effort

F = Fd + Fw +Fg

= 49.093 + 39.965 + 125

= 214.051 lb

Therefore, A 2500-lb vehicle has a drag coefficient of 0.31 and a frontal area of 20 ft2, and the minimum tractive effort  = 214.051 lb.

To know more about drag force refer to:

brainly.com/question/13512865

#SPJ4

In US usage, nickel is a five cent coin, struck by the United States Mint.

It is composed of 75% copper, and 25% nickel, and is issued since 1866.

It has a diameter of 21.21mm or 0.835 inch, and a thickness of 1.95mm or 0.077inch.

To make a bunch of coins, tall 100 inches, we'll need 1299 coins, when it's the case, with five cents coins.

Quarter, for example, has different dimensions, as well as thickness, so the number of coins will be different.

Nickel is a metal element that occurs naturally and has shiny characteristics and a silvery white color.

Nickel is one of the five most common metallic elements, especially in the earth's crust. Because it is included in this type of metal, nickel is a fairly good conductor or conductor of electricity and heat.

In nature, 60% of nickel resources are in the form of laterite and 40% in the form of sulfide deposits. US Geological Survey data also states that currently there are around 74 million metric tons of available nickel reserves.

Until now, most of the nickel produced in Indonesia is exported to other countries, such as China, Japan, Europe and America. The nickel products exported include nickel ore, matte nickel, ferronickel and nickel pg iron (NPI).

Learn more about nickel at https://brainly.com/question/3542561.

#SPJ4