Which gas will have the most collisions between its particles?

Explanation:

The mass of bromine is 79.904, and since there are two of them in the Calcium Bromide molecule, we'll multiply it by 2 to get 159.808. Dividing that by the full mass of the molecule then multiply it by 100 will give you the answer.

Based on a pH scale, the chemical compound which is classified as an acid is: A. Hydrogen fluoride (HF).

A pH scale can be defined as a tool that is designed and developed for the measurement of the molar concentration of hydrogen ions (H⁺) in both acidic and alkaline (basic) solutions.

This ultimately implies that, a pH scale can be used to measure and specify the acidity, neutrality or basicity of any chemical solution.

In this scenario, the pH of each of the given chemical compound are as follows:

Read more on pH here: brainly.com/question/24233266

Answer:

H₂O

Explanation:

Two molecules of Hydrogen and one molecules of Oxygen, when mixed, create H₂O, or water. There is no scientific name for H₂O due to it's common name. It is just refereed to as "water" or H₂O.

Answer:

b. 0°C and 1 bar

Explanation:

Hello,

In this case, the STP conditions are standard temperature and pressure sets of conditions for experimental measurements to be established to allow comparisons to be made between different sets of data, it means that a specific pressure and temperature is assigned to analyze the properties of a substance. Such conditions are strictly 0°C and 1 bar because a large number of physical, chemical and thermodynamic properties are measured at them, therefore the standard entropy of a substance refers to its entropy at: b. 0°C and 1 bar.

Best regards.

Answer:

All of the above processes have a ΔS < 0.

Explanation:

ΔS represents change in entropy of a system. Entropy refers to the degree of disorderliness of a system.

The question requests us to identify the process that has a negative change of entropy.

carbon dioxide(g) → carbon dioxide(s)

There is  a change in state from gas to solid. Solid particles are more ordered than gas particles so this is a negative change in entropy.

water freezes

There is  a change in state from liquid to solid. Solid particles are more ordered than liquid particles so this is a negative change in entropy.

propanol (g, at 555 K) → propanol (g, at 400 K)

Temperature is directly proportional to entropy, this means higher temperature leads t higher entropy.

This reaction highlights a drop in temperature which means a negative change in entropy.

methyl alcohol condenses

Condensation is the change in state from gas to liquid. Liquid particles are more ordered than gas particles so this is a negative change in entropy.

Answer:

Empirical formulae is NO2

Molecular Formulae is NO2

The question is missing. Here is the complete question.

Which balanced redox reaction is ocurring in the voltaic cell represented by the notation of [tex]Al_{(s)}|Al^{3+}_{(aq)}||Pb^{2+}_{(aq)}|Pb_{(s)}[/tex]?

(a) [tex]Al_{(s)}+Pb^{2+}_{(aq)} ->Al^{3+}_{(aq)}+Pb_{(s)}[/tex]

(b) [tex]2Al^{3+}_{(aq)}+3Pb_{(s)} -> 2Al_{(s)}+3Pb^{2+}_{(aq)}[/tex]

(c)[tex]Al^{3+}_{(aq)}+Pb_{(s)} ->Al_{(s)}+Pb^{2+}_{(aq)}[/tex]

(d) [tex]2Al_{(s)}+3Pb^{2+}_{(aq)} -> 2Al^{3+}_{(aq)}+3Pb_{(s)}[/tex]

Answer: (d) [tex]2Al_{(s)}+3Pb^{2+}_{(aq)} -> 2Al^{3+}_{(aq)}+3Pb_{(s)}[/tex]

Explanation: Redox Reaction is an oxidation-reduction reaction that happens in the reagents. In this type of reaction, reagent changes its oxidation state: when it loses an electron, oxidation state increases, so it is oxidized; when receives an electron, oxidation state decreases, then it is reduced.

Redox reactions can be represented in shorthand form called cell notation, formed by: left side of the salt bridge (||), which is always the anode, i.e., its half-equation is as an oxidation and right side, which is always the cathode, i.e., its half-equation is always a reduction.

For the cell notation: [tex]Al_{(s)}|Al^{3+}_{(aq)}||Pb^{2+}_{(aq)}|Pb_{(s)}[/tex]

Aluminum's half-equation is oxidation:

[tex]Al_{(s)} -> Al^{3+}_{(aq)}+3e^{-}[/tex]

For Lead, half-equation is reduction:

[tex]Pb^{2+}_{(aq)}+2e^{-} -> Pb_{(s)}[/tex]

Multiply first half-equation for 2 and second half-equation by 3:

[tex]2Al_{(s)} -> 2Al^{3+}_{(aq)}+6e^{-}[/tex]

[tex]3Pb^{2+}_{(aq)}+6e^{-} -> 3Pb_{(s)}[/tex]

Adding them:

[tex]2Al_{(s)}+3Pb^{2+}_{(aq)} -> 2Al^{3+}_{(aq)}+3Pb_{(s)}[/tex]

The balanced redox reaction with cell notation [tex]Al_{(s)}|Al^{3+}_{(aq)}||Pb^{2+}_{(aq)}|Pb_{(s)}[/tex] is

[tex]2Al_{(s)}+3Pb^{2+}_{(aq)} -> 2Al^{3+}_{(aq)}+3Pb_{(s)}[/tex]

Answer:

0.0583g

Explanation:

The equation of the reaction is;

2HNO3(aq) + Mg(OH)2(aq) -------> Mg(NO3)2(aq) + 2H2O(l)

From the question, number of moles of HNO3 reacted= concentration × volume

Concentration of HNO3= 0.100 M

Volume of HNO3 = 20.00mL

Number of moles of HNO3= 0.100 × 20/1000

Number of moles of HNO3 = 2×10^-3 moles

From the reaction equation;

2 moles of HNO3 reacts with 1 mole of Mg(OH)2

2×10^-3 moles reacts with 2×10^-3 moles ×1/2 = 1 ×10^-3 moles of Mg(OH)2

But

n= m/M

Where;

n= number of moles of Mg(OH)2

m= mass of Mg(OH)2

M= molar mass of Mg(OH)2

m= n×M

m= 1×10^-3 moles × 58.3 gmol-1

m = 0.0583g

Answer: So other scientist can replicate the experiment and see if they get the same results in other words, test reliability.

Explanation:

Answer:

a.

[tex]m_K=8.056gK\\ \\m_{Cl_2}=4.028gCl_2[/tex]

b.

[tex]m_{Cr}=10.51gCr\\ \\m_{O_2}=4.851gO_2[/tex]

c.

[tex]m_{Sr}=13.88gSr\\\\m_{N_2}=1.479gN_2[/tex]

Explanation:

Hello,

In this case, we proceed via stoichiometry in order to compute the masses of all the reactants as shown below:

a. [tex]2K+Cl_2\rightarrow 2KCl[/tex]

[tex]m_K=15.36gKCl*\frac{1molKCl}{74.55gKCl}*\frac{2molK}{2molKCl}* \frac{39.1gK}{1molK}=8.056gK\\ \\m_{Cl_2}=15.36gKCl*\frac{1molKCl}{74.55gKCl}*\frac{1molCl_2}{2molKCl}* \frac{70.9gCl_2}{1molCl_2}=4.028gCl_2[/tex]

b. [tex]4Cr+ 3O_2\rightarrow 2Cr_2O_3[/tex]

[tex]m_{Cr}=15.36gCr_2O_3*\frac{1molCr_2O_3}{152gCr_2O_3l}*\frac{4molCr}{2molCr_2O_3}* \frac{52gCr}{1molCr_2O_3}=10.51gCr\\ \\m_{O_2}=15.36gCr_2O_3*\frac{1molCr_2O_3}{152gCr_2O_3l}*\frac{3molO_2}{2molCr_2O_3}* \frac{32gO_2}{1molCr_2O_3}=4.851gO_2[/tex]

c. [tex]3Sr(s) + N_2(g) \rightarrow Sr_3N_2[/tex]

[tex]m_{Sr}=15.36gSr_3N_2*\frac{1molSr_3N_2}{290.86gSr_3N_2}*\frac{3molSr}{1molSr_3N_2}* \frac{87.62gSr}{1molSr}=13.88gSr\\\\m_{N_2}=15.36gSr_3N_2*\frac{1molSr_3N_2}{290.86gSr_3N_2}*\frac{1molN_2}{1molSr_3N_2}* \frac{28gN_2}{1molN_2}=1.479gN_2[/tex]

Regards.

Answer:

A precipitate will form, BaCO₃

Explanation:

When Ba²⁺ and CO₃²⁻ ions are in an aqueous media, BaCO₃(s), a precipitate, is produced following its Ksp expression:

Ksp = 5.1x10⁻⁹ = [Ba²⁺] [CO₃²⁻]

Where the concentrations of the ions are the concentrations in equilibrium

For actual concentrations of a solution, you can define Q, reaction quotient, as:

Q = [Ba²⁺] [CO₃²⁻]

If Q > Ksp, the ions will react producing BaCO₃, if not, no precipitate will form.

Actual concentrations of Ba²⁺ and CO₃²⁻ are:

[Ba²⁺] = [Ba(NO₃)₂] = 1.1x10⁻³ × (20.0mL / 100.0mL) = 2.2x10⁻⁴M

[CO₃²⁻] = [Na₂CO₃] = 8.4x10⁻⁴ × (80.0mL / 100.0mL) = 6.72x10⁻⁴M

100.0mL is the volume of the mixture of the solutions

Replacing in Q expression:

Q = [Ba²⁺] [CO₃²⁻]

Q = [2.2x10⁻⁴M] [6.72x10⁻⁴M]

Q = 1.5x10⁻⁷

As Q > Ksp

Answer:

Table salt: answer salt

Tea: answer acidic

Carbonated drinks: answer acidic

Baking powder: answer acid and base

Detergent: answer acid and basic

Alum: answer acidic

Explanation:

I hope this helps. Enjoy your day!

Answer:

1. oxidation

2. reduction

3. oxidation

4. oxidation

Explanation:

Oxidation and Reduction in terms of hydrogen

Oxidation and Reduction in terms of Oxygen

Answer:

A

Explanation:

Absorbing moisture to protect goods from damage. Hence, option A is correct.

Silica gel is a desiccant, or drying agent, that manufacturers often place in little packets to keep moisture from damaging certain food and commercial products.

Silica Gel is a good drying agent for preventing corrosion, contamination, spoilage, and mould growth in many commodities and products due to its physical properties.

Learn more about silica gel here:

https://brainly.com/question/18723447

#SPJ2

Answer:

To calculate the [OH-] in the solution we must first find the pOH

That's

pH + pOH = 14

pOH = 14 - pH

First to find the pH we use the formula

From the question

[H3O+]= 2.6 × 10^-8 M

pH = - log 2.6 × 10^-8

pH = 7.6

pH = 8

So we pOH is

pOH = 14 - 8 = 6

To find the [OH-] we use the formula

6 = - log [OH-]

Find antilog of both sides

The solution is slightly basic since it's pH is in the basic region and slightly above the neutral point 7

Hope this helps you

Answer:

[tex][N_2]_{eq}=[H_2]_{eq}=0.09899M[/tex]

[tex][NO]_{eq}=0.00202M[/tex]

Explanation:

Hello,

In this case, for the given chemical reaction:

[tex]2NO\rightleftharpoons N_2+O_2[/tex]

We know the equilibrium constant and equilibrium expression:

[tex]Kc=2.4x10^3=\frac{[N_2][O_2]}{[NO]^2}[/tex]

That in terms of the reaction extent [tex]x[/tex] (ICE procedure) we can write:

[tex]2.4x10^3=\frac{x*x}{(0.2M-2*x)^2}[/tex]

In such a way, solving for [tex]x[/tex] by using a quadratic equation or solver, we obtain:

[tex]x_1=0.09899M\\x_2=0.1010M[/tex]

Clearly the solution is 0.09899M since the other value will result in a negative equilibrium concentration of NO. In such a way, the equilibrium concentrations of all the species are:

[tex][N_2]_{eq}=[H_2]_{eq}=x=0.09899M[/tex]

[tex][NO]_{eq}=0.2M-2*0.09899M=0.00202M[/tex]

Regards.

Answer:

Higher frequency than visible light -  Ultraviolet light, X-rays, and Gamma rays

Lower frequency than visible light - Infrared radiation, microwaves, and Radio waves

Explanation:

The frequencies of electromagnetic radiations vary according to their wavelengths. The relationship between the frequency and wavelength of the waves is expressed such that:

      λ = c/f, where λ = wavelength, c = speed of light, and f = frequency.

Thus, there is an inverse relationship between the wavelength and the frequency of electromagnetic waves.

The order of the electromagnetic waves based on their frequency from the lowest to the highest is radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma-rays

Hence, electromagnetic waves with higher frequencies than visible light include ultraviolet light, X-rays, and Gamma rays while those with lower frequencies include Infrared radiation, microwaves, and Radio waves.

Answer:

need points

Explanation:

Answer:

0 g.

Explanation:

Hello,

In this case, since the reaction between methane and oxygen is:

[tex]CH_4+2O_2\rightarrow CO_2+2H_2O[/tex]

If 0.963 g of methane react with 7.5 g of oxygen the first step is to identify the limiting reactant for which we compute the available moles of methane and the moles of methane consumed by the 7.5 g of oxygen:

[tex]n_{CH_4}=0.963gCH_4*\frac{1molCH_4}{16gCH_4}=0.0602molCH_4\\ \\n_{CH_4}^{consumed}=7.5gO_2*\frac{1molO_2}{32gO_2}*\frac{1molCH_4}{2molO_2} =0.117molCH_4[/tex]

Thus, since oxygen theoretically consumes more methane than the available, we conclude the methane is the limiting reactant, for which it will be completely consumed, therefore, no remaining methane will be left over.

[tex]left\ over=0g[/tex]

Regards.

Answer:

W = -120 KJ

Explanation:

Since the piston–cylinder assembly undergoes an isothermal process, then the temperature is constant.

Thus; T1 = T2 = 400K

change in entropy; ΔS = −0.3 kJ/K

Formula for change in entropy is written as;

ΔS = Q/T

Where Q is amount of heat transferred.

Thus;

Q = ΔS × T

Q = -0.3 × 400

Q = -120 KJ

From the first law of thermodynamics, we can find the workdone from;

Q = ΔU + W

Where;

ΔU is Change in the internal energy

W = Work done

Now, since it's an ideal gas model, the change in internal energy is expressed as;

ΔU = m•C_v•ΔT

Where;

m is mass

C_v is heat capacity at constant volume

ΔT is change in temperature

Now, since it's an isothermal process where temperature is constant, then;

ΔT = T2 - T1 = 0

Thus;

ΔU = m•C_v•ΔT = 0

ΔU = 0

From earlier;

Q = ΔU + W

Thus;

-120 = 0+ W

W = -120 KJ

Answer:

X₅Y₂Z₃

Explanation:

The formula of a compound is determined as the whole number ratio between moles of each element present in the molecule.

The molecule is made from X, Y and Z. To fin the ratio we will divide the given moles in the moles of Y (0.197 moles), because is the element with the low number of moles.

X = 0.492 moles / 0.197 moles = 2.5

Y = 0.197 moles / 0.197 moles = 1

Z = 0.295 moles / 0.197 moles = 1.5

But, as the formula is given just with whole numbers, if we multiply each number twice:

X = 2.5*2 = 5

Y = 1*2 = 2

Z = 1.5*2 = 3

The formula is:

Answer:

ethyl 4-bromobenzoate

Explanation:

In this question, we can start with the Index of Hydrogen Deficiency (I.H.D):

[tex]I.H.D=\frac{2C+2+N-H-X}{2}=\frac{(2*9)+2+0-9-1}{2}~=~5[/tex]

This indicates, that we can have a benzene ring (I.H.D = 4) and a carbonyl group (I.H.D = 1), for a total of 5.

Additionally, in the 1H-NMR info, we have a triplet 1.39 (3H) followed by a doublet 4.38 (2H), this indicates the presence of an ethyl group ([tex]CH_3-CH_2-[/tex]). Also, in the formula, we have 2 oxygens if we have carbonyl group with 2 oxygens we have a high probability to have an ester group.

[tex]O=C-O-CH_2-CH_3[/tex]

Now, if we add this to the benzene ring and the "Br" atom that we have in the formula, we will have ethyl 4-bromobenzoate.

See figures 1 and 2 to further explanations.

I hope it helps!

Answer:

the mas is .291 g

Explanation:

the mass of a object does not change. so when added the substance the beaker. you had the mass of both objects together. you know the mass of the beaker and you know the mass of both. since mass does not change. the beakers mass is still 74.605g. the mass of both objects is 74.896. all you have to do is subtract the mass of the beaker from the total mass. 74.896 - 74.605 equals .291g. so the mass of the unknown substance Is .291g

Answer:

A. tungsten

Explanation:

Tungsten is a material which high melting point ie. does not melt easily incase of high temperature

Answer:

option(A):Tungsten

Explanation:

tungsten has highest melting point.

Answer:

NO3 has 3 atoms of oxygen in it per molecule (indicated by the subscript of 3) and (NO3)2 means you have 2 NO3 molecules, meaning you double the subscript to get 6 oxygen atoms.

Explanation:

Answer:

a. Methanol remains the same

b. Methanol decreases

c. Methanol increases

d. Methanol remains the same

e. Methanol increases

Explanation:

Methanol is produced by the reaction of carbon monoxide and hydrogen in the presence of a catalyst as follows; 2H2+CO→CH3OH.

a) The presence or absence of a catalyst makes no difference on the equilibrium position of the system hence the methanol remains constant.

b) The amount of methanol decreases because the equilibrium position shifts towards the left and more reactants are formed since the reaction is exothermic.

c) If the volume is decreased, there will be more methanol in the system because the equilibrium position will shift towards the right hand side.

d) Addition of helium gas has no effect on the equilibrium position since it does not participate in the reaction system.

e) if more CO is added the amount of methanol increases since the equilibrium position will shift towards the right hand side.

Answer:

A. mm,cm,m,Km

B. mg, g, Kg

C. mL,L

D. ms, s, min, h

Explanation:

Answer

Iridium(IV)Nitrite

The correct IUPAC name of the Ir(NO₂)₄ compound is Iridium(IV)Nitrite.

Whether it's in a continuous chain or just a ring, the largest chain of carbons joined by a single bond serves as the basis for IUPAC nomenclature.

A chemical compound would seem to be a substance that contains numerous similar molecules made of atoms from different elements joined by chemical bonds.

The given compound is Ir(NO₂)₄. It can be seen that 4 nitro group is attached with Ir and its coordination number is 4. Hence, the IUPAC name will be Iridium(IV)Nitrite.

To know more about  IUPAC nomenclature.

https://brainly.com/question/16631447

#SPJ2

Answer

A

Explanation:

Beta radiation is only very dangerous when it is ingested or if there is nothing in the way. The steel should protect you.

Yes, it was beta radiation and the steel was enough to block it. Hence, option A is correct.

Beta radiation is a current of electrons released at a rate exceeding the speed of light, with kinetic energy between 0.2 MeV and 3.2 MeV. Due to their lower mass which is approximately 5.5×[tex]10^{-4}[/tex] amu (9.130×[tex]10^(-24)[/tex], interactions between β-particles and the atoms of pass-through materials are much less frequent than the interactions between 5-007-particles: less than 200 ion pairs are typically formed in each centimetre of the air passage.

When we are working in a lab when radiation alarms go off and we are able to hide inside a steel cabinet, whose sides are about 1.5 inches thick, until the alarm goes off.

Preliminary reports show that the radiation was weakly ionizing and negatively charged. Yes, it was beta radiation and the steel was enough to block it.

Hence, option A is correct.

Learn more about beta radiation here:

https://brainly.com/question/16645044

#SPJ5