Which of the following power systems is the best option to provide enough force to turn a rudder and steer a ship in the desired direction?
fluid power system
pneumatic power system
liquid power system
hydraulic power system
Answers
Answer:
hydraulic power system
Explanation:
I'm a heavy equipment mechanic
Related Questions
Technician A says to check the operation of the throttle valve boost, you do not need to disconnect the vacuum hose on a vacuum modulator and attach a vacuum pump to vary the line pressure. Technician B says to check the operation of the throttle valve boost, you need to connect a pressure gauge to the transmission line pressure test port. Who is correct
Answers
Answer:
Technician B you need to connect a pressure gauge to the transmission line pressure test port.
Describe the greatest power in design according to Aravena?
Answers
The greatest power in design according to Aravena is "the power of synthesis”.
Hope that helps!
Which option identifies the type of device the engineer will develop in the following scenario?
An engineer is designing a system to automatically fill a pool when the water level drops too low. He needs to develop a device that can start, stop, and otherwise control the flow of the fluid.
piston
torque
valve
actuator
Answers
Answer:
Valve
Explanation:
Valves control the flow of a fluid
a "Float valve" or an electric valve controlled by a "liquid/gas" switch would be perfect
8. When building a structure, square and
plumb mean the same thing.
a. True
b. False
Answers
Natural ventilation uses primarily
Answers
Natural ventilation unlike fan forced ventilation uses the natural forces of wind and buoyancy to deliver fresh air into buildings
Calculate the change in storm water runoff in cubic feet per second caused by building a house on the Noblesville, IN lot assuming the following conditions. Use these tables and type only the number in the field below. (43,560 ft2/acre)
Ø Pre-development
o a 100 year, 1 hour design storm. Rainfall intensity – 3.05 in/hr
o Assume that 90% of the 0.5 acre lot is concrete pavement and 10% is grass lawn (flat, well drained, sandy soil)
o Use average values for pre-development coefficients
Ø Post development
o Plans include a two story house with a 1500 sq. ft. foot print and about 500 sq. ft. of concrete driveway, deck, and sidewalk.
o The remainder of the lot will be planted with grass lawn (flat, well drained, sandy soil).
o Use worst case coefficients for impervious developed surfaces and average values for other surfaces.
Answers
Use worst case coefficients for impervious developed surfaces and average values for other surfaces.
what unit contains a hold-in winding and pull-in winding a. field coil b. armature c. starter solenoid d. ignition switch
Answers
Answer:
C. starter solenoid
Explanation:
The pull-in coil moves the starter solenoid plunger, a rod that moves the pinion gear toward the ring gear on the flywheel. Positioned next to it, the hold-in coil serves to control the movement of the pull-in coil. The starter solenoid is a powerful device.
When actions that squeeze or push on a rock are stronger in some directions than others, we call this Group of answer choices differential stress. pressure. shear stress. weathering
Answers
Differential Stress are known to be actions that squeeze or push on a rock are stronger in some directions than others.
What is Differential Stress?Differential stress is known to be a kind of difference that do exist between the greatest and the least compressive stress that is experienced by a specific object.
The term is used in geological and civil engineering and it is known to be the greatest compressive stress as Differential Stress are known to be actions that squeeze or push on a rock are stronger in some directions than others.
Learn more about Differential Stress from
https://brainly.com/question/4902351
Describe the greatest power in design according to Aravena?
What are the three problems with global urbanization?
Describe the first case where the power of synthesis was used to solve design problems.
Describe the second case where the power of synthesis was used to solve design problems.
How could you use synthesis in your life to solve problems?
Answers
Answer: Describe the greatest power in design according to Aravena? The subject of Aravena’s recent Futuna Lecture Series in New Zealand was ‘the power of design,’ which he described as ultimately being “the power of synthesis” because, increasingly, architects are dealing with complex issues and problems.
What are the three problems with global urbanization? 1. Degraded Environmental Quality ...
2. Overcrowding ...
3. Housing Problems ...
4. Unemployment ...
5. Development of Slums...
How could you use synthesis in your life to solve problems? Hence, synthesis is often not a one-time process of solution design but is used in combination with problem understanding and solution analysis to progress towards a more complete understanding of problems and solutions over time (see Applying the Systems Approach topic for a more complete discussion of the dynamics of this aspect of the approach).
I got all three answers
When high head pressure in a hermetic system causes oil and refrigerant breakdown, the presence of moisture or dirt can result in ____ forming.
Answers
Answer:
Acids, sludge, carbon
Explanation:
For installations where the nonlinear load is huge, most consulting engineers will specify ____-rated transformers.
Answers
Answer:
K
Explanation:
For installations where the nonlinear load is huge, most consulting engineers will specify K-rated transformers.
If trolence adds 1 crayon to 5 boxes, how many goats does he have in his lawn?
Answers
Answer: uhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
what is a beta testing ?
Answers
Hope this helps :)
Petroleum engineers work almost exclusively with dry materials.
False
True
Answers
PLEASE HELP I NEED IT NOW
What usually causes damage to the diode and decreases the efficiency of filters?
A. Large current
B. Small current
C. Large voltage
D. Small voltage
Answers
Answer:
I think it's C. Large voltage
Explanation:
Hope this is right, If so then....
Pls, choose me as brainliest!
Which of the following uses pressure and flow to transmit power from one location to another?
acoustics
propulsion
pumps
fluid power
Answers
Answer:
fluid power
Explanation:
fluids commonly used in fluid power are Oil, Water, Air, CO², and Nitrogen gas, fluid power is commonly confused with hydraulic power, which only uses liquids, fluid power uses either liquids or gases
1. Quindlen, Lincoln and King all allude to the same line in The Declaration of Independence. That line is:. Single choice.
(4 Points)
"E pluribus unum"
"A house divided against itself cannot stand"
"All men are created equal"
"Four score and seven years ago"
Answers
A construction company got a project to a build a hotel in a sand desert area where the temperature often exceeds 130° F. Which structural element should they use so that the hotel sustains its structure in such extreme weather conditions?
A.
beam
B.
column
C.
truss
D.
plate
E.
arch
Answers
I believe the answer would be the plate
Hope that helps!
In the example of adrenaline signaling, which steps represent an amplification of the signal?.
Answers
Answer:
The mechanism to activate an immune cell to make an antibody involves signal transduction using tyrosine kinases. Place in order the following series of steps to activate this function. (1) The activated receptor phosphorylates cytoplasmic proteins. (2) Conformational change occurs in the receptor tyrosine kinase. (3) Cytoplasmic protein crosses the nuclear membrane to activate genes. (4) An immune hormone signals the immune cell. (5) Activation of protein kinase site(s) adds phosphates to the receptor to activate it. a. 2,1,4,3,5 b. 5,3,4,2,1 c. 4,1,5,2,3 d. 4,2,5,1,3 e. 2,5,3,4,1
Explanation:
hope it helps you
Which of the following distinguishes a reservoir from an accumulator?
Reservoirs often contain contaminants.
Reservoirs do not usually have a set temperature.
Reservoirs usually have zero pressure.
Reservoirs are used for temporary storage.
Answers
Answer:
Reservoirs usually have zero pressure
Explanation:
accumulators are controlled by pressure valves while reservoirs are not
accumulators "accumulate" pressure while reservoirs are used to store "overflow" fluids for later use if needed
Answer:
Reservoirs usually have zero pressure
Explanation:
Two common types of glue
Answers
Answer:
white craft glue
yellow wood glue
Explanation:
the answer is this!
was it correct?sir!?
Answer:
epoxy
silicone
Explanation:
hope this helps
Match the job titles to the tasks.
aeronautical engineer
animator
webpage designer
commercial photographer
creates storyboards based on clients
needs
assesses proposals for airplane designs
to determine if they meet standards
uses special equipment and techniques
to capture images
creates software code, graphics, and
multimedia elements for websites
Answers
Answer:
creates storyboards based on clients’ needs- Animator
assesses proposals for airplane designs to determine if they meet standards- Aeronautical engineer
uses special equipment and techniques to capture images- Commercial Photographer
creates software code, graphics, and multimedia elements for websites- Webpage designer
Hope it helps!!!brainliest pls!!I tried my besthow to make a building like Burj Khalifa?
Answers
Answer:
Total cost of construction: $1.5 billion
Explanation:
Which instrument would help you to draw arcs?
O A. protractor
OB. compass
OC. triangle
OD.French curve
Answers
Answer:
the answer is b compass.
Which of the following statements is not true of a ladder diagram?
o It arranges wires in orderly rows.
O It can have more than one output device on each rung.
It can have more than one input device on each rung.
o It shows input devices on the left side.
Answers
Answer:
It can have more than one output device on each rung.
Explanation:
Answer:
O It can have more than one output device on each rung.
Explanation:
There cannot be more than one output device on each rung of a ladder diagram. So the answer is:
O It can have more than one output device on each rung.
Suzanne Brett wants to borrow $55,000 from the bank. The interest rate is 6.5% and the term is for 5 years.
What is the monthly payment amount?
$2,343.00
$5,857.50
$1214.58
$11,715
Answers
Answer: $14575
$55000
6.5%
5 years
Total Payment Amount: $72875
Yearly payment :$72875/5= $14575
Which packet-forwarding method does a router use to make switching decisions when it is using a forwarding information base and an adjacency table?.
Answers
Why are civil engineers often employed by the government?
Civil engineers must first gain experience working for the government in order to be accredited.
Governments are usually responsible for building and maintaining the built environment.
Governments must hire civil engineers because they cannot contract with civil engineers directly.
Private businesses often do not have the resources to pay civil engineers’ salaries.
Answers
Answer:
(b) Governments are usually responsible for building and maintaining the built environment.
Explanation:
Public works, which are the responsibility of Government, generally have a considerable civil engineering content. Government employs civil engineers to propose, design, and oversee the construction of such projects.
In some cases, the government employee simply needs to be knowledgeable enough to understand the work done by the contractor's engineers. In other cases, the government employee must make sure the contractor's engineering work is accurate and complete, makes use of appropriate technology, and is in compliance with appropriate regulations and standards. That can require educating the contractor--more than simple oversight.
The next question #5 in the assessment Javier is well versed in computer-aided design and is adept at spatial reasoning. What other skill would be most important to employers if he were applying for a job as a civil engineer?
Answer:
surveying and cartography is the correct
The primary of an ideal transformer has 400 turns and its secondary has 200 turns. Neglecting electrical losses, if the power input is 200 W (average) and 240 V (rms), we can expect the output of the secondary to be
Answers
Answer:
A.C. Voltage (transformers only work with A.C.) from input (primary) to output (secondary) is purely a function of the turns ratio.
Explanation:
Cost and benefit, environmental effects, ethical or legal implications, health and safety considerations, and
sustainability are the five main categories of which of the following options?
Answers
The five main categories are: Cost and benefit, environmental effects, ethical or legal implications, health and safety considerations, and sustainability are typically considered as the five main categories of impact assessment or analysis.
What is assessment?Impact assessment or analysis is a process of evaluating the potential consequences of a proposed action or decision. The five main categories listed, cost and benefit, environmental effects, ethical or legal implications, health and safety considerations, and sustainability, are commonly used to help organizations understand and weigh the positive and negative consequences of their choices.
Therefore, Cost and benefit analysis evaluates the financial or economic impacts of a proposed action, including the costs of implementation, maintenance, and any potential return on investment.
Learn more about assessment from
https://brainly.com/question/24690729
#SPJ1