Which option explains why this amino acid can act
both an acid and a base?
(1 point)
It contains both an amino functional group and a carboxyl functional group. In a solution, the amino group can
increase acidity, while the carboxyl group can decrease acidity
It contains both an amino functional group and a methyl functional group. In a solution, the amino group can
increase acidity, while the methyl group can decrease acidity
It contains both an amino functional group and a carboxyl functional group. In a solution, the amino group can
decrease acidity, while the carboxyl group can increase acidity
It contains both an amino functional group and a methyl functional group. In a solution, the amino group can
decrease acidity, while the methyl group can increase acidity

Answer:

Solids do not undergo diffusion because it has a fixed structure (vibrates in a fixed position) and it also cannot be compressed.

Hoped this helped in any way

Have a nice day

Answer:

Well a human bein is a complex organism with pain and emotion.

There is a very very complex brain that recives and sends sis also faster than the eye can see.

Thats why when you touch a hot surface a lighting fast signal is sent from the hand to the brain and the brain sends a signal back to the hand to tell it what to do and this all happens a faster than a second.

A human is made out of millions, billions, trillions, and quadrillions if cells working together to perform special tasks like eating, walking, and talking.

Answer:

Humans are the only known species that are able to think as complexly as we do. For example, animals are not able to have thoughts about their thoughts. Animals are not able to ponder the existence of our universe, develop calculus, chemical solutions, etc. There are many other intelligent species- like chimpanzees and octopi. However, both of those species are limited in the type of communication, emotion, and complex thinking skills that they possess compared to human beings.

Explanation:

Explanation:

If you bring an unopened bag of potato chips aboard an airplane you'll notice that the bag puffs up as the plane ascends to a higher altitude explain why this happens using the information and terminology you learned in this module

Using Gay Lussac's Law

[tex]\boxed{\sf \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}}[/tex]

[tex]\\ \sf\longmapsto \dfrac{30}{27}=\dfrac{90}{T_1}[/tex]

[tex]\\ \sf\longmapsto T_1=\dfrac{90\times 27}{30}[/tex]

[tex]\\ \sf\longmapsto T_1=81°C[/tex]

Gay Lussac's Law:-

It states that at constant volume (V),The pressure(P) of fixed amount of gas caries directly with its absolute temperature(T).

[tex]\\ \sf\longmapsto P\propto T[/tex]

[tex]\\ \sf\longmapsto \dfrac{P}{T}=Constant[/tex]

[tex]\\ \sf\longmapsto \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}[/tex]

[tex]\\ \sf\longmapsto P_1T_2=P_2T_1[/tex]

The final temperature of the gases with 90 lbs/in² is equal to 627°C assuming the volume is constant.

Gay-Lussac's law can be described as if the volume (V) of the gas remains constant then the pressure (P) is directly proportional to the absolute temperature (T) of the gas.

Gay Lussca's law in mathematical expression can be represented as:

P/T = k

It can be also represented as the pressure (P) being directly proportional to the temperature (T).

P ∝ T                            ( V of gas is constant)

or,    P₁/T₁ = P₂/T₂

Given, the initial temperature of the gas, T₁ = 27°C = 27 + 273 = 300 K

The initial pressure of the gas, P₁ = 30 lbs/in²

The final pressure of the gas,  P₂ = 90 lbs/in²

The final temperature of the gases in a hair spray can be determined as:

[tex]{\displaystyle \frac{P_1}{T_1} =\frac{P_2}{T_2}[/tex]

[tex]{\displaystyle T_2 =\frac{P_2\times T_1}{P_1}[/tex]

[tex]{\displaystyle T_2 =\frac{90\times 300}{30}[/tex]

T₂ = 900 K = 900 - 273

T₂ = 627°C

Learn more about Gay Lussac's law, here:

brainly.com/question/11387781

#SPJ2

Answer:

0.35 g.

Explanation:

We'll begin by calculating the number of mole of Fe(NO3)3 in 35 mL of 0.250 M Fe(NO3)3 solution.

This is illustrated below:

Molarity of Fe(NO3)3 = 0.250 M

Volume = 35 mL = 35/1000 = 0.035 L

Mole of Fe(NO3)3 =?

Molarity = mole /Volume

0.250 = mole of Fe(NO3)3 / 0.035

Cross multiply

Mole of Fe(NO3)3 = 0.25 x 0.035

Mole of Fe(NO3)3 = 8.75×10¯³ mole

Next, we shall determine the number of mole of KOH in 55 mL of 0.180 M

KOH solution. This is illustrated below:

Molarity of KOH = 0.180 M

Volume = 55 mL = 55/1000 = 0.055 L

Mole of KOH =.?

Molarity = mole /Volume

0.180 = mole of KOH /0.055

Cross multiply

Mole of KOH = 0.180 x 0.055

Mole of KOH = 9.9×10¯³ mole.

Next, we shall write the balanced equation for the reaction. This is given below:

3KOH + Fe(NO3)3 —> Fe(OH)3 + 3KNO3

From the balanced equation above,

3 moles of KOH reacted with 1 mole of Fe(NO3)3 to produce 1 mole of Fe(OH)3.

Next, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above,

3 moles of KOH reacted with 1 mole of Fe(NO3)3.

Therefore, 9.9×10¯³ mole of KOH will react with = (9.9×10¯³ x 1)/3 = 3.3×10¯³ mole of Fe(NO3)3.

From the above illustration, we can see that only 3.3×10¯³ mole out of 8.75×10¯³ mole of Fe(NO3)3 given is needed to react completely with 9.9×10¯³ mole of KOH.

Therefore, KOH is the limiting reactant and Fe(NO3)3 is the excess reactant.

Next, we shall determine the number of mole of Fe(OH)3 produced from the reaction.

In this case, we shall use the limiting reactant because it will give the maximum yield of Fe(OH)3 as all of it is consumed in the reaction.

The limiting reactant is KOH and the mole of Fe(OH)3 produce can be obtained as follow:

From the balanced equation above,

3 moles of KOH reacted to produce 1 mole of Fe(OH)3.

Therefore, 9.9×10¯³ mole of KOH will react to produce = (9.9×10¯³ x 1)/3 = 3.3×10¯³ mole of Fe(OH)3.

Finally, we shall convert 3.3×10¯³ mole of Fe(OH)3 to grams. This can be obtained as follow:

Molar mass of Fe(OH)3 = 56 + 3(16 + 1) = 56 + 3(17) = 107 g/mol

Mole of Fe(OH)3 = 3.3×10¯³ mole

Mass of Fe(OH)3 =?

Mole = mass /Molar mass

3.3×10¯³ = Mass of Fe(OH)3 / 107

Cross multiply

Mass of Fe(OH)3 = 3.3×10¯³ x 107

Mass of Fe(OH)3 = 0.3531 ≈ 0.35 g.

Therefore, 0.35 g of Fe(OH)3 was produced from the reaction.

Answer:

solid

Explanation:

Answer:

physical

Explanation:

The change is physical.

A physical change involves a reversible change to the physical properties of substances, whereas a chemical change involves an irreversible change to the chemical properties of substances through a chemical reaction.

The dissolution of common salt is a physical change because the common salt can be retrieved by evaporating off the water. This is what was manifested by the deposition of common salt crystals on the wick.

aqueous Magnesium Chloride reacts with liquid Bromide to form aqueous Magnesium Bromide and Chlorine gas

Answer:

1) electron=19 Proton=19 Neutron=39-19=20

2) 1

3) in pic

Answer:

(i)electrons = 19; Protons = 19 Neutrons =39-19=20

(ii) 1

(iii) 2,8,8,1

Hope this helps.

Please mark me as Brainliest:))

Answer:

I think it's positive charge

Answer is D

Explanation:

Answer:

B. Neutral

Explanation:

When there is a ionic bond,  one element steals or takes away an electron from the other element.

An example is NaCl

In this compound, Chlorine atom steals an extra electron from Sodium to fill its outer shell. So, this is a Ionic bond. Since, the Sodium compound gives away an atom, it is positively charged. Since, Chlorine steals an atom, it is negatively charged. Opposite charges attract, so they become a compound.

When positive and negative mix, it becomes neutral.

Answer:

Answer is 10.398(approx.)

Explanation:

NaOH ⇄ Na⁺ + OH⁻

pOH = -log[OH⁻]= -log(2.5×10⁻⁴) = 3.602

∴pH = 14 - pOH = 10.3989(approx.)

pls mark it as brainliest

Answer:

The volume at 0.860 atm and 15°C will be 56.638 L

Explanation:

Gay Lussac's law explains the variation in the pressure of a gas by modifying its temperature, keeping the volume constant: it determines that pressure and temperature are directly proportional quantities. In other words, Gay-Lussac's law states that when a gas undergoes a constant volume transformation, the ratio of the pressure exerted by the temperature of the gas remains constant:

[tex]\frac{P}{T}=k[/tex]

On the other hand, Boyle's law determines that the pressure exerted by a gas is inversely proportional to its volume at constant temperature. This is expressed mathematically as:

P*V=k

Finally, Charles's law says that at constant pressure, the volume of an ideal gas is directly proportional to its absolute temperature and is expressed mathematically as:

[tex]\frac{V}{T}=k[/tex]

Combined law equation is the combination of three gas laws called Boyle's, Charles's and Gay-Lussac's law:

[tex]\frac{P*V}{T}=k[/tex]

When you want to study two different states, an initial one and a final one of a gas, you use:

[tex]\frac{P1*V1}{T1}=\frac{P2*V2}{T2}[/tex]

In this case:

Replacing:

[tex]\frac{1.05 atm*48 L}{298 K}=\frac{0.86atm*V2}{288 K}[/tex]

and solving:

[tex]V2=\frac{288 K}{0.86 atm} *\frac{1.05 atm*48 L}{298 K}[/tex]

you get:

V2= 56.638 L

The volume at 0.860 atm and 15°C will be 56.638 L

This question is incomplete, here´s the complete question.  

How does the percentage of monounsaturated and polyunsaturated fatty acids in olive oil compare to that of canola oil? Match the words in the left column to the appropriate blanks in the sentences on the right.

Olive oil has about ____ monounsaturated fats, while canola oil has about ___.

Olive oil has about ___ polyunsaturated fats, while canola oil has about ___.

6%

10%

30%

84%

5%

65%

Answer:

Olive oil has about 84% monounsaturated fats, while canola oil has about 65%.

Olive oil has about 5% polyunsaturated fats, while canola oil has about 30%.

Explanation:

Olive and canola oil are the major sources of monounsaturated fatty acids. Although vegetable oils usually have high concentrations of polyunsaturated fatty acids and less monounsaturated fats, olive and canola oils have comparatively less polyunsaturated fatty acids, and more monounsaturated fatty acids.

Answer:

1.Chemistry is the scientific discipline involved with elements and compounds composed of atoms, molecules and ions: their composition, structure, properties, behavior and the changes they undergo during a reaction with other substances.

2.The scientific method is an empirical method of acquiring knowledge that has characterized the development of science since at least the 17th century. It involves careful observation, applying rigorous skepticism about what is observed, given that cognitive assumptions can distort how one interprets the observations.

Answer:

A = Base x Height, Volume = Length x Width x Height

Answer:

blended is better than synthetic fibre. because blended fabrics have quality of synthetic and natural fibres so they are more better than fabrics. For example terrycot. Blended Fibres are considered better than individual synthetic fibres because they show the advantages of 2 or more fibres.

There would be an increase in the concentration of carbonic acid - this is how an increase in carbon dioxide concentration influences the system.

In chemistry, a dynamic equilibrium lives once a reversible reaction occurs. Substances transition between the reactants and products at equal rates, indicating there is no net change. Reactants and products exist formed at such a rate that the concentration of neither changes. It is a precise example of a system in a steady state. After a time, a reversible reaction in a closed system can get what we call a dynamic equilibrium.

The correct answer is option D.

To learn more about dynamic equilibrium refer to:

https://brainly.com/question/12920261

#SPJ2

Answer:

Noble gases are the least reactive of all known elements. Their outer energy levels are full because they each have eight valence electrons. ... As a result, noble gases cannot become more stable by reacting with other elements and gaining or losing valence electrons.

Explanation:

Noble gases have complete valence shells so they do not participate in the reactions while the other elements in the main group have incomplete valence shells so they participate in the reaction to complete it.

Noble gases can be described as the six elements that belong to the 18th  group of the modern periodic table. The elements of group 18 are Helium, Neon, Argon, Krypton, Xenon, and Radon.

Under normal temperature and pressure conditions, all noble gases exist in the gaseous state and exhibit low chemical reactivity hence they are also referred to as inert gas.  All noble gases possess stable electronic configurations because their valence shell is fully filled.

Noble gases are generally found as mono-atomic gases. The general electronic configuration group 18 elements can be written as ‘ns²np⁶’ where n is the principal quantum number.

Therefore, the reactivity of the noble gases can be distinguished from other elements in the main group.

Learn more about noble gases, here:

brainly.com/question/11764545

#SPJ2

Answer:

Explanation:

100 miles * [ 5280 feet / 1 mile] * 12 inches / 1 foot]

100 * 5280 * 12 inches

6336000 inches in 100 miles

Answer:

BIOHEAT is a biodiesel mix that can be utilized (without equipment changes) in most home heaters. BIOHEAT promptly diminishes various hurtful discharges from heater use (up to 80% contingent upon blend used) and the oil is made from nearby feedstocks like utilized cooking oil

Answer:

1.43 mol

Explanation:

Answer:

to make them react to each other to form a compound

Explanation:

mark me as brainliest pls

Answer:

An element is a material that consists of a single type of atom. Each atom type contains the same number of protons. Chemical bonds link elements together to form more complex molecules called compounds. A compound consists of two or more types of elements held together by covalent or ionic bonds.

Answer: B

Explanation: Apex

An electron configuration be used to predict relative atomic size because the larger the highest energy level number, the larger the atomic

radius.

The electron configuration of an element shows the arrangement of electrons in atoms of that element.

As more sublevels are added, repulsion between electrons occupying shells increases causing a greater shielding and consequent increase in the size of the atom.

Hence, the larger the highest energy level number, the larger the atomic

radius.

Learn more: https://brainly.com/question/238050

Answer:On a hot dry day humidity will be less.when humidity decreases rate of evaporation increases

Answer:

The water that evaporates from a desert cooler takes in energy from the environment for filling up for the loss of energy during EVAPORATION making the environment cold.

Therefore, on a hot dry day, the Evaporation is more which means the environment will be colder.

Explanation:

I hope it is okay.

I learnt it last year, so I went back to my book and explained it better in my own way.

Thanks.

Answer:

The volume occupied by 2.34 grams of CO2 gas at STP   is 1.18  L

Answer:

C.

Explanation:

I believe C is the correct answer.