Answer:
White light contains seven colors, which are separated by the prism.
White light reacts with chemicals in the air to produce seven colors.
Explanation:
It was first observed by Sir Issac Newton, that when white light is passed through a prism, an elongated, coloured patch of light is obtained on a screen placed behind the prism. The seven colours obtained constitute the spectrum of white light.
In nature, white light is separated into its constituent wavelengths when white light interacts with substances in the atmosphere.
Answer:
The correct answer is “color is an impurity added to white light by the prism.”
and
“White light contains seven colors, which are separated by the prism
Explanation:
What is the approximate pressure of a storage cylinder of recovered R-404A that does not contain any non-condensable impurities and is stored in a room where the temperature is 80°F?A. 68 psigB. 72 psigC. 174psigD. 288 psig
Answer:
D. 288 psig
Explanation:
The storage cylinder of recovered R-404A is a mixture of R-125, R-143 and R-134. The refrigeration sector has low temperatures for installation. The pressure of cylinder at 80 F will be 288 psig. The pure refrigerants have inside a container have saturation temperature which is equal to ambient temperature.
Please help me. I need this in a few hours.
Answer:
A) The population of prey is greater than that of predator
A long, straight, horizontal wire carries a left-to-right current of 40 A. If the wire is placed in a uniform magnetic field of magnitude 3.7 ✕ 10−5 T that is directed vertically downward, what is the resultant magnitude of the magnetic field 22 cm above the wire (in T)?
Answer:
The magnitude of the resultant of the magnetic field is [tex]4.11\times10^{-5}\ T[/tex]
Explanation:
Given that,
Current = 40 A
Magnetic field [tex]B=3.7\times10^{-5}\ T[/tex]
Distance = 22 cm
We need to calculate the magnetic field
Using formula of magnetic field
[tex]B'=\dfrac{\mu_{0}I}{2\pi r}[/tex]
Where, r = distance
I = current
Put the value into the formula
[tex]B'=\dfrac{4\pi\times10^{-7}\times20}{2\pi\times0.22}[/tex]
[tex]B'=1.8\times10^{-5}\ T[/tex]
We need to calculate the magnitude of the resultant of the magnetic field
Using formula of resultant
[tex]B''=\sqrt{B^2+B'^2}[/tex]
Put the value into the formula
[tex]B''=\sqrt{(3.7\times10^{-5})^2+(1.8\times10^{-5})^2}[/tex]
[tex]B''=4.11\times10^{-5}\ T[/tex]
Hence, The magnitude of the resultant of the magnetic field is [tex]4.11\times10^{-5}\ T[/tex]
What is the observation and what is the inference in the following text. Explain.
The chimpanzee climbed the tall tree. The chimpanzee must be very strong,
Observation: The chimpanzee climbed the tall tree.
Inference: The chimpanzee must be very strong,
Explanation:
An inference differs from an observation because an inference is a guess or possible explanation about a phenomenon. On the other hand, an observation is a statement based on evidence gathered through the senses. In this context, the sentence that is an observation is "The chimpanzee climbed the tall tree" because this statement is based on visual evidence. Moreover, the inference is "The chimpanzee must be very strong" because this is just a guess to explain how the chimpanzee climbed up the tree.
The distance from the Earth to the Sun equals 1 AU. Neptune is 30 AU from the Sun. How far is Neptune from the Earth? AU
Answer:
The answer is 29 AU
Hoped I helped
mark me as brainliest
Answer:
29
Explanation:
a metre rod on wedge is example of unstable equilibrium.why
Answer:
because it has no balance
Seje
A burning electric bulb is a good example of a(an)... object.
2 points
illuminated
luminous
translucent
transparent
Clear selection
Can you help me answer this pls
Answer:
luminous bcz they emits light by their own and don't need other resources to emit light
famous comparative and superlative form
Answer:
comparative----more famous, superlative----- most famous
[tex]\huge{\fbox{\red{Answer:}}}[/tex]
Word Given :Famous
___________________✍
Comparative Form : more famous
Superlative Form : most famous
Hope you understand❣
What benefits does preforming this investigation in the physical world have over the computer simulation?
Please help!!
Explanation:
Can be safer and cheaper than the real world. Able to test a product or system works before building it. Can use it to find unexpected problems. Can speed things up or slow them down to see changes over long or short periods of time.
.
.
.
.
Answer:
"Performing this experiment in the physical world gives you more control over which parameters you can adjust. You also gain experience with scientific equipment and procedures. In addition, there may be flaws in the computer model, since no model is perfect."
Explanation:
edmentum
Identifying Energy Transformations
What is one energy transformation that is taking place when a plant is growing?
radiant energy to thermal energy
thermal energy to nuclear energy
O chemical energy to thermal energy
O radiant energy to chemical energy
Answer:
My answer is radiant energy to chemical energy because it uses the sun which is a form of solar energy and then converts the food to chemical energy for the plant itself
Answer: Radiant energy to chemical energy
Explanation: Right on edge2021
mot o to ro ben luc 6h voi van toc toc 40 km/h
Answer:
? có thể cụ thể hơn ko
Explanation:
1Dyne = How many Newtons??
Answer:
answer to this question
1 × 10-5 newton
hope it helps:)
Answer:
I dyne= 1×10^-5 newtons
Explanation:
hope it will help you
Hess's law states that:
A. Energy cannot be created nor destroyed, it can only change form.
B. The enthalpy change when 1 mole of a substance undergoes complete combustion under standard conditions is equal to molar masses of the compounds.
C. When the enthalpy changes under standard conditions, 1 mole of a substance is formed from its elements.
D. The overall enthalpy change for a reaction is independent of the route the reaction takes.
Answer:
D. The overall enthalpy change for a reaction is independent of the route the reaction takes.
Answer: Hess's law states that the overall enthalpy change for a reaction is independent of the route the reaction takes. Option D is correct.
It is given Hess's law.
It is required to state the Hess's law.
What is Hess's law ?Thermochemical equations can be manipulated to give the data chemical reactions. We find exactly how much energy will be absorbed or released by the reaction because we may face various explosions.
There are mainly two ways to calculate ΔH of any reaction. First If the reaction has ΔH then the reverse of the reaction will have opposite ΔH and the second is if double the ΔH of the substances, double the ΔH.
Therefore Hess's law states that the overall enthalpy change for a reaction is independent of the route the reaction takes.
Learn more about Hess's law states here:
https://brainly.com/question/14561923
#SPJ5
I have this question where I think the answer is "directed north of east," but apparently it is not. Can someone explain: vectors v1 andv2 shown below have equal magnitudes. the vectors represent the velocities of an object at times t1, and t2, respectively. the average acceleration of the object between time t1 and t2 was...
Answer:
North of west
Explanation:
Acceleration is the change in velocity over change in time.
a = Δv / Δt
The x component of the acceleration is:
aₓ = (0 − v₁ₓ) / (t₂ − t₁)
aₓ = -v₁ₓ / (t₂ − t₁)
aₓ < 0
The y component of the acceleration is:
aᵧ = (v₂ − v₁ᵧ) / (t₂ − t₁)
aᵧ > 0
Therefore, the acceleration points northwest.
The average acceleration of the object between time t1 and t2 was directed north of west.
What is Vector?
A quantity that has both magnitude and direction. It is typically represented by an arrow whose direction is the same as that of the quantity and whose length is proportional to the quantity's magnitude.Here , the velocities are V1 and V2.V1 has two components , one in X direction Vx and other is in Y direction Vy.Now . acceleration = change in velocity with respect to time , i.e.a = v/t
Now, The x component of the acceleration is:
aₓ = (V2 − V1x) / (t2 − t1)
aₓ = -V1x/ (t2 − t1)
Because the x component of V2 is 0.
aₓ < 0
Similarly, The y component of the acceleration is:
aᵧ = (v₂ − v₁ᵧ) / (t₂ − t₁)
aᵧ > 0
Thus, The average acceleration of the object between time t1 and t2 was directed north of west.
Learn more about vector quantities and scalar quantities here -
https://brainly.com/question/356987
#SPJ2
Find out the name of metals which can be obtained from the following .a) argentite b)hematite c)chalcopryite d)bauxite e)calverite
Answer:
a). Silver, Ag
b). Iron, Fe
c). Copper, Cu
d). Aluminium, Al
e). Gold, Au
A copper-nickel alloy of composition 50 wt% Ni-50 wt% Cu is slowly heated from a temperature of 1200°C (2190 °F). (a) At what temperature does the first liquid phase form? (b) What is the composition of this liquid phase? (c) At what temperature does complete melting of the alloy occur? (d) What is the composition of the last solid remaining prior to complete melting?
Answer:
HELLO BELOW IS THE ATTACHED DIAGRAM USED TO ANSWER YOUR QUESTION AS IT WAS MISSING
A) 1270⁰c
B) 65%
C) 1320⁰c
D) 62%
Explanation:
Nickel alloy composition : 50 wt% Ni - 50 wt%
initial temperature = 1200⁰c = 2190⁰F
A) The temperature at which the first liquid phase form
from the attached diagram the temperature at which the first liquid if formed is 1270⁰c ( at point 2 )
B ) The composition of this liquid phase ( THE FIRST LIQUID )
the composition is found at point 3
wt % of Nickel = 35%, wt% of copper = 100 - 35 = 65%
C ) The temperature at which the alloy melts completely
from the attached diagram the temperature = 1320⁰c ( point 4 )
D) The composition of the last solid remaining prior to complete melting
this can be gotten at point 5 and calculated as
wt % of Ni = 62%
wt % of Cu = 100 - 62 = 38%
what do you mean by 5meter length
Answer:
h, nzk SC j AZ hsbzkzjx NM s in xbxnjxjxIf the force on a spring is 1 N and it stretched 0.5 m, what is the spring
constant?
A.4 N/m
B.0.2 N/m
C.2 N/m
D. 0.4 N/m
We know
[tex]\boxed{\sf Spring\:constant(K)=\dfrac{F}{x}}[/tex]
[tex]\\ \sf\longmapsto K=\dfrac{1}{0.5}[/tex]
[tex]\\ \sf\longmapsto K=2N/m[/tex]
State the law of conservation of machine
Answer:
law of conservation of energy is that a perpetual motion machine of the first kind cannot exist, that is to say, no system without an external energy supply can deliver an unlimited amount of energy to its surroundings
Explanation:
Hope it helps.
Mark me as Brainliest plz!
A small cylinder is rolled along a ruler and completes two revolutions. The circumference is the distance around the outside of a circle. What is the circumference of the cylinder? A 4.4 cm B 5.2 cm C 8.8 cm D 10.2 cm
Answer; 4.4cm
Explanation: There is a ruler upon which the cylinder start from 1.4cm and reaches 10.2cm
distance traveled =10.2-1.4=8.8
since this cylinder is small so the linear distance can be approximately taked as rotational distance(as in case of point charge) so
2x2πxr =8.8
so the circumference will be 2πr=4.4cm
explore how archemides principle is applied in building a ship and submarine
Answer:
Principle Archimedes is applied in building a ship and submarine using the manipulating that buoyancy, is controlled the ballast tank system.
Explanation:
Submarine is rather had they focused on main parts of the submarine,he is complex and long process implementation,the most submarine design like submarine stability.
Submarine stability is complete and the fundamental Archimedes principle to arrive the weight of submarine is equal to buoyancy force.
Submarine into the parts and components of ballast tank the sequence in diving and surfacing,there two vital parts:- flood parts and air vents
flood parts:- at the bottom position and allow water to enter or leave that tank.
air vents:- air vents at the top of the pressure hall,and that they submarine dive.
this time submarine is most modern system is depth is 300 to 450 meters,high pressure air is 15 bar is tank air valve.
submarine is basic of the effective volume of all the submarine surfaced condition,submarine minus to the free water flood is equal to the fully pressure hull,submarine is the surfaced condition.
convert 12 kg into gram
Answer:
12000gram
Explanation:
1kg=1000gram
so, 12kg=12x1000
12kg=12000gram
Given amount=12kg
[tex]\boxed{\sf 1kg=1000g}[/tex]
[tex]\\ \sf\longmapsto 12kg=12(1000)[/tex]
[tex]\\ \sf\longmapsto 12kg=12000g[/tex]
5. A combination of waves is producing oscillations on a rope that is fixed at both ends and has a tension of 100 ????. The wavelength of the resulting net wave is equal to the length of the rope. If the equation for the displacement of a point on the rope is given by y(x, t) = (0.1 m) sin π x sin 12πt, where the rope begins at x = 0, x is in meters, and t is in seconds, what are the a) length of the rope, b) the speed of the waves on the rope, and c) the mass of the rope?
Answer:
a) 4 m
b) 24 m/s
c) 0.174 kg
Explanation:
a) Tension in string equation
The information given are;
The wavelength is equal to the rope length , λ = L
The tension = 100 N
The displacement of a point on the rope is y(x, t) = (0.1 m) sinπ x sin 12πt
Given that the wavelength = the length of the rope, the rope is on second harmonic
L = 2·n and the length of the wire = 2 × 2 = 4 m given the dimensions are in meters
b) Where k = 2·π/λ
v = ω/k = 12π/(2·π/λ)= (12π/2π)×λ = 24 m/s
c) f = v/λ = 24/4 = 6 Hz
[tex]f = \dfrac{\sqrt{\dfrac{T}{m/L} } }{2L} = \dfrac{\sqrt{\dfrac{100}{m/4} } }{2 \times 4}[/tex]
[tex]6 \times 8= {\sqrt{\dfrac{100}{m/4} } }[/tex]
m/4 = 100/2304
m = 0.174 kg.
A 5000 pound car sitting in the last parking space in the block a scalar or vector quantity??
Answer:
scalar
Explanation:
pounds is a unit of mass, and mass is a scalar quantity.
if it was weight (in newtons) it would be a vector.
A 5000-pound car sitting in the last parking space in the block is a scalar quantity, not a vector quantity.
What are scaler quantity and vector quantity?The scaler quantity is only the quantity having some amount of magnitude but not direction and vector quantity is that which consists of both magnitude and the direction with them.
In 5000 pound car sitting in the last parking space in the block, it has a magnitude of 5000 pounds but does not have any direction to move and it comes under the scalar quantity.
Therefore, a car has scalar quantity not vector if, a 5000-pound car sitting in the last parking space in the block.
Learn more about scaler quantity and vector quantity, here:
https://brainly.com/question/774036
#SPJ2
Carter is at the burger joint. To get there he traveled 5 blocks right and 10 blocks up. What coordinates did Carter start from?
Currently Carter is at 11 (Swimming pool)
Hope it helps you.. pls mark brainliest if it helps you
we hammer the broader side of a nail and not its sharp end to put it in wood .why ?
Explanation:
We hammer the broader side of a nail instead of its sharp end to put it in wood. It is a concept based on the pressure exerted.
The force acting per unit area of an object is called pressure exerted. It means that pressure is inversely proportional to the area of cross section i.e. area increases, pressure decreases and vice versa.
The broader side of a nail has more area as compared to the sharp end. It means that the broader side will exert less pressure on them which make it easier for us to fix it into the wood.
What are the chances that radio transmissions from Earth or messages sent on distant space probes will ever be received by living beings
Answer:
Very low
Explanation:
It is fair to say to a reasonable extent that there are very low chances that radio transmissions from Earth or messages sent on distant space probes will ever be received by living beings .
Bear in mind that for years some scientists have believed without any substantial evidence that there are other living beings in distant space.
an object is sliding down in clean plane the velocity change at a constant rate from 10 cm to 15 CM in 2 second what is it acceleration ?
Initial velocity=10m/s=u
Final velocity=v=15m/s
Time=t=2s
[tex]\boxed{\sf Acceleration=\dfrac{v-u}{t}}[/tex]
[tex]\\ \sf\longmapsto Acceleration=\dfrac{15-10}{2}[/tex]
[tex]\\ \sf\longmapsto Acceleration=\dfrac{5}{2}[/tex]
[tex]\\ \sf\longmapsto Acceleration=2.5m/s^2[/tex]
Answer: a = 2.5 cm/s²
Explanation:
Acceleration = (Final velocity - Initial Velocity)/time taken
a = v-u/t
Initial velocity = 10 cm/s
Final velocity = 15 cm/s
Time = 2 seconds
a = (15-10)/2
a = 5/2
a = 2.5 cm/s²
Therefore the acceleration is 2.5 cm/s²
please click thanks and mark brainliest if you like :)
what is the story of coal
Explanation:
Coal is a fossil fuel and is the altered remains of prehistoric vegetation. The energy we get from coal today comes from the energy that plants absorbed from the sun millions of years ago. In the burning process of coal, carbon dioxide (CO2) is emitted. Humans expel CO2, and plants utilize it every single day. Carbon is a building block for all forms of life and is used in a lot of everyday products.
Coal is a combustible black or brownish-black sedimentary rock, formed as rock strata called coal seams. Coal is mostly carbon with variable amounts of other elements, chiefly hydrogen, sulfur, oxygen, and nitrogen.Coal is formed when dead plant matter decays into peat and is converted into coal by the heat and pressure of deep burial over millions of years. Vast deposits of coal originate in former wetlands—called coal forests—that covered much of the Earth's tropical land areas during the late Carboniferous (Pennsylvanian) and Permian times. However, many significant coal deposits are younger than this and originate from the Mesozoic and Cenozoic eras.
Answer:
look it up of goog le
Explanation:
prove that, s=u+v/2
please I need help
Answer:
Actually the formulae is S=(u+v/2)t
.TO explain,from average velocity=distance /time
and average velocity is u+v/2
hence using the formular
Average velocity=distance/time
distance will be=average velocity ×time
so S=(u+v/2)t