Answer:
Wholesale Market. 1. The market for the sale of goods to a retailer. That is, a wholesaler receives large quantities of goods from a manufacturer and distributes them to stores, where they are sold to consumers. ... The market for the sale of securities to institutional investors rather than individuals.
A square is cut out of a copper sheet. Two straight scratches on the surface of the square intersect forming an angle theta. The square is heated uniformly. As a result, the angle between the scratches?a) increasesb) decreasesc) stays the samed) depends on whether theta is obtuse or acute
Answer:
a) increases
Explanation:
Almost all substance or material undergoes expansion due to heating. Heat gives thermal energy to the molecules of a substance increasing their body temperature. The temperature of a substance is the measure of the average kinetic energy of the molecules of that substance. When the temperature of a substance increases, the molecules begin to agitate and try to move far from each other, leading to either a linear, area, or cubic expansion, or all three of them. Metals like copper expand very well on heating, and their expansion is relatively minute, but very observable. When the face of such a copper is scratched to give and angle, heating the copper uniformly will cause the copper to expand, leading to an increase in the angle formed.
If 5 complete oscillations of a sound wave pass through a point in 0.5 s and the speed of sound was recorded to be 10 m/s, then find the wavelength of the sound.
Answer:
Wavelength = 1 meters
Explanation:
Given that,
Number of oscillations is 5
It passes through a point in 0.5 s
The speed of sound was recorded to be 10 m/s.
We need to find the wavelength of the sound.
Firstly, we will find frequency of this wave. Total no of oscillations per unit time is called frequency. So,
[tex]f=\dfrac{5}{0.5}\\\\f=10\ Hz[/tex]
Now the speed of wave in terms of wavelength and frequency is given by :
[tex]v=f\lambda[/tex]
Here, [tex]\lambda[/tex] = wavelength
[tex]\lambda=\dfrac{v}{f}\\\\\lambda=\dfrac{10\ m/s}{10\ Hz}\\\\\lambda=1\ m[/tex]
So, the wavelength of the sound is 1 meters.
what is the length x of the side of the triangle below
Answer:
you didn't post any triangles. Thus, the question could not be answered.
Answer:
The given triangle is a right triangle.
The length of the hypotenuse is 2.52.5 units.
The given angle is 39\degree39° .
The unknown side xx is adjacent to the given angle.
We can therefore use the cosine function to find xx .
Recall the mnemonics CAH.
This means that;
\cos\theta=\frac{Adjacent}{Hypotenuse}cosθ=
Hypotenuse
Adjacent
This implies that,
\cos39\degree=\frac{x}{2.5}cos39°=
2.5
x
We multiply both sides by 2.52.5 to get,
2.5\cos39\degree=x2.5cos39°=x
x=2.5(0.7771)x=2.5(0.7771)
We evaluate to get
x=1.94x=1.94
Therefore the length xx of the side of the triangle is 1.91.9 units to the nearest tenth.
The speed of light in space is 3.00 x 10^8 m/s. The time for light from the sun to reach earth is 8mins and 20 seconds. Therefore, the distance from the Sun to Earth is
Select one:
A. 2.40 x 10^9 m
B. 8.64 x 10^12 m
C. 1.50 x 10^11
D. 2.25 x 10^9
Answer:
C. 1.50×10¹¹ m
Explanation:
First, convert the time to seconds.
8 min × (60 s/min) + 20 s = 500 s
Distance = speed × time
d = (3×10⁸ m/s) (500 s)
d = 1.50×10¹¹ m
The distance from the Sun to the Earth is 1.50 × 10¹¹. Speed is the distance travelled by an object in a particular time period. Thus, the correct option is C.
What is the Speed of light?
The speed of light in vacuum is commonly denoted by c. It is a universal physical constant. The speed of light (c) is exactly equal to 3.00 x 10⁸m/s (meter per second).
The speed of an object is the rate of change of position with respect to time. It is also defined as the distance covered by an object with respect to time. It can be calculated by dividing the distance travelled by an object by the time taken. It is a scalar quantity as it has only magnitude and no direction.
Speed = Distance / time
Distance = Speed × Time
Distance = 3.00 × 10⁸ × 500
Distance = 1500 × 10⁸
Distance = 1.50 × 10¹¹
Therefore, the correct option is C.
Learn more about Speed of light here:
https://brainly.com/question/394103
#SPJ2
whats suface tension
Answer: "Surface tension is a film of a liquid caused by the attraction of the particles in the surface layer by the bulk of the liquid, which tends to minimize surface area."
Hope this helps!
Answer:
Explanation:
Surface tension is the property of a liquid surface. It is an effect where the surface of the liquid is strong.
example - small insects can walk on water as they do not have enough weight to penetrate it.
This image might help you
Hope it helps
plz mark as brainliest!!!!!!!
why audiotape, credit cards and videotape not placed closed to a strong magnet
Answer:
There are many possible causes of magnetic defects in credit cards. But there are two direct causes: 1. Close to a strong magnet 2. Damage from scratches or wear Even if used properly it can cause magnetic defects. But if used incorrectly, it can cause an immediate relapse. If you have never used a credit card due to magnetic defects, check what will cause magnetic defects and for example credit cardMagnetic stripe cards, such as credit cards and cash cards, are more likely to cause magnetic field defects if brought near magnetically generating objects such as magnets. Although exposure to strong magnets does not necessarily lead to failure. However, it should be kept away from objects that may cause magnetic field defects.
Explanation:
Magnetic fields can erase or distort the data stored on these items. The correct option is A.
Magnetic media are used to store information in a magnetic format on audiotapes, credit cards, and videotapes. They may have their magnetic patterns and particle alignment disturbed if they are placed close to a powerful magnet.
The stored data may be lost or damaged as a result. For instance, credit cards' magnetic stripes may become illegible, audiotapes may lose their sound quality or possibly be completely erased, and videotapes may have distorted or scrambled imagery and audio.
To preserve the accuracy and utility of the data they contain, it is crucial to keep these things away from strong magnetic fields.
Thus, the correct option is A.
For more details regarding magnetic field, visit:
https://brainly.com/question/14848188
#SPJ5
Your question seems incomplete, the probable complete question is:
Why audiotape, credit cards and videotape not placed closed to a strong magnet
A. Magnetic fields can erase or distort the data stored on these items.
B. Magnetic fields can cause these items to become permanently demagnetized.
C. Magnetic fields can cause these items to generate excess heat and potentially catch fire.
D. Magnetic fields can cause these items to emit harmful radiation.
the unit of energy is a derived quantity. why
Answer:
It was given the name Newton(N). From this ,the derived quantity of energy is defined,as the work produced when the unit of force causes a displacement equal to the unit of length of its point of application along its direction. It was given the name Joule(J).
So, the unit of a energy is a derived quantity.
a car is stationary at first.it moves off with.acceleration of 2m.s-2.Calculate how far it will move in 10s
Answer:
100 m.
Explanation:
At first the car was stationary, so its inicial velocity is zero. Considering its inicial position 0 m and using the Equation of motion for the position:
X(t) = Xo + vo.t +a[tex]t^{2}[/tex]/2 , vo=0, Xo=0, a=2m/[tex]s^{2}[/tex]
X(10) = (2 x [tex]10^{2}[/tex])/2 = 100 m.
Kgms-1-= Ns ...solution
Answer:
units of impact or impulse or momnetum are same
These are
Kg m s-1 or N s
Calculate the intensity of current flowing through a computer that consumes 180W and operates at 120 V.
A.)0,66 A
B.)12600 A
C.)1,5 A
D.)60 A
Answer:
C) 1.5 A
Explanation:
P = IV
180 W = I (120 V)
I = 1.5 A
An 8.0g bullet, moving at 400 m/s, goes through a stationary block of wood in 4.0 x 10^-4s, emerging at a speed of 100 m/s. (a) what average force did the wood exert on the bullet? (b) how thick is the wood?
Answer:
Explanation:
Initial velocity (u) of the Bullet = 400 m/sec
Final velocity (v) of the Bullet = 100 m/sec
Bullet passed through the block in (t) = 0.0004 sec
Using 1st Equation of motion :
400 m/s = 100 m/s - a (0.0004)
Deceleration of Bullet = 750,000 m/sec^2
(a) F (force exerted by the wooden block on the bullet) = F (force exerted by the bullet on the wooden block)
F = m * a = 0.008 * 750,000 = 6000 N
(b) Using 3rd Equation of motion :
[tex]v^{2} = u^{2} - 2aS[/tex]
10000 = 160000 - 2 * 750,000 * S
Thickness of wood (S) = 0.1 m
Define measurement and write its importance.
Answer:
Measurement is the way humans define certain amounts of matter, and is expressed in various types of units respective to the type of matter or object being defined.
Explanation:
Measurement is extremely important because it helps one another understand how much of something is needed to accomplish something. If no method existed to define the specific amount needed, we would simply mess delicate operations up and machines, even simple recipes, would fail.
How does mercury differ from other metals?(1 point)
It does not conduct electricity.
It is not lustrous.
It is not solid under normal conditions.
It does not chemically react with other elements.
Answer:
It is not solid under normal conditions
Mercury differs from other metals as It is not solid under normal conditions. It is the only metal that is liquid at room temperature, therefore the correct answer is option C
What is the matter?Anything which has mass and occupies spaces is known as matter, mainly there are four states of matter solid liquid gases, and plasma.
These different states of matter have different characteristics according to which they vary their volume and shape.
Because it is not solid under normal circumstances, mercury is different from other metals. Because it is the only metal that is liquid at room temperature,
Thus the correct answer is option C
Learn more about the matter here
brainly.com/question/9402776
#SPJ2
You have a cup with 50cm filled with water. How much pressure will the water act on the bottom of the cup? The density of water is 1000kg/m^3 and g = 10N/kg
Answer:
5000 N/m².
Explanation:
The following data were obtained from the question:
Density (d) = 1000 kg/m³
Acceleration due to gravity (g) = 10 N/kg
Height (h) = 50 cm = 50/100 = 0.5 m
Pressure (P) =.?
Pressure is related to density and height by the following equation:
P = dgh
Where
P is the pressure.
d is the density.
g is the acceleration due to gravity.
h is the height.
With the above formula, we can obtain the pressure at the bottom of the cup as follow:
P = dgh
P = 1000 x 10 x 0.5
P = 5000 N/m²
Therefore, the pressure at bottom of the cup is 5000 N/m².
Light travels at a speed of 2.998*108 m/s. Light takes approximately 3.25 minutes to travel from the Sun to reach a planet. Calculate the distance from the Sun to this planet in meters. Give your answer to 0 decimal places.
Answer:
585×10⁸ m
Explanation:
Distance = rate × time
d = (2.998×10⁸ m/s) (3.25 min) (60 s/min)
d = 585×10⁸ m
An object accelerates to a velocity of 230 m/s over a time of 2.5 s. The acceleration it experienced was 42 m/s2. What was its initial velocity?
Answer:
230 = x + 105
x= 125
Explanation:
v = v0 + at
calculate the force exerted by a mental ball having a mass of 70kg moving with speed of 20m/s>2
Answer:
F = 1400 N
Explanation:
It is given that,
Mass of the ball, m = 70 kg
It is moving with an acceleration of 20 m/s². We need to find the force exerted by the ball.
Force is given by the product of mass and acceleration. So,
F = ma
[tex]F=70\ kg\times \ 20m/s^2\\\\F=1400\ N[/tex]
So, the force of 1400 N is exerted by a metal ball.
A 63 kg kg person starts traveling from rest down a waterslide 6.0 mm above the ground. At the bottom of the waterslide, it then curves upwards by 1.0 mm above the ground such that the person is consequently launched into the air. Ignoring friction, how fast is the person moving upon leaving the waterslide
Answer:
change waterslide according to question. and you are good to go. check photo for solve
The person moving with speed upon leaving the waterslide is equal to 0.313 m/s while ignoring the friction.
What is the law of conservation of energy?If there is a loss of energy in any part of the system, there must be the same amount of a gain of energy in some other part of the isolated system.
Kinetic energy + Potential energy = constant
Therefore, the initial kinetic and potential energy of the person must be equal to the final kinetic and potential energy.
mgh₁ + mv₁²/2 = mgh₂ + mv₂²/2
gh₁ + v₁²/2 = gh₂ + v₂²/2
2gh₁ + v₁² = 2gh₂ + v₂²
2g(h₁ - h₂) = v₂² - v₁²
[tex]v_2=\sqrt{2g(h_2-h_1) + v^2_1}[/tex] .................(1)
Given, the mass of the person, m = 63 Kg
The initial speed of the person as at rest, v₁ = 0
Consider that the speed of the person while leaving the waterslide is v₂
The initial height of the person above the ground, h₁ = 6.0 mm
The height of the person leaving the waterslide, h₂= 1.0 mm
Substitute, the value of m, v₁, h₁ and h₂ in equation (1):
[tex]v_2 = \sqrt{2(9.8m/s^2)(6mm-1mm) + (0)^2}[/tex]
[tex]v_2 =\sqrt{2(9.8)\times 5 \times 10^{-3}} \;m/s[/tex]
[tex]v_2 =\sqrt{0.098}\; m/s[/tex]
v₂ = 0.313 m/s
Learn more about the law of conservation of energy, here:
https://brainly.com/question/12050604
#SPJ2
is a light sensitive screen
Answer:
The retina is the light sensitive focusing screen. Inside, there's two types of fluid, one watery behind the lens, and further back, a thicker one that helps the eyeball hold its shape.
Answer:
The retina is the light sensitive focusing screen.
hope this helps <3
define Neutons 3rd law .
Answer:
that when two object interact, they apply forces to one another that are equal in magnitude and opposite in direction.
Explanation:
Newton's third law: the law of action and reaction
Mass stays the for an object even when or gravitational forces change the of the object.
Answer:
For some reason it doesn't let me type it in here so the answer is in the comment box!
I hope this will help you!:)
Microwaves operate at a frequency of 2.40 GHz. Find the minimum thickness for a plastic tray with a refractive
index of 1.45 that will cause enhanced reflection of microwaves incident normal to the tray.
Answer:
y (lambda) = c / f incident wavelength
y = 3 * E8 / 2.4 * E9 = .125 m incident wavelength
y' = .125 / 1.45 = .0862 m wavelength inside of tray
T = y' / 4 thickness required for phase change at bottom
T = .0862 m / 4 = .0261 m = 2.61 cm
The image formed is 0.25 times the size of the object and 10 cm behind the pinhole. If the height of image on screen is 6 cm what is the distance of the object from the screen?
Answer:
40 cm
Explanation:
Magnification of a pinhole camera is given by;
M= height of image/ height of object
Since;
M= 0.25
Height of image = 6cm
Height of object = height of image / M
Height of object = 6/0.25 = 24 cm
Height of image/ height of object = distance of image from pinhole/ distance of object from pinhole
Since the distance of image from pinhole = 10cm
Let the distance of object from pinhole be x
6/24 = 10/x
6x = 240
x= 240/6
x = 40 cm
Our Moon a. was a separate small planet before it was captured by the Earth's gravity. b. spun off the fast-spinning Earth during the early formation of the Solar System. c. coalesced from gas and dust in its current place next to the Earth. d. was formed by the collision of the Earth with a Mars-sized protoplanet.
Answer:
d. was formed by the collision of the Earth with a Mars-sized protoplanet.
According to the The giant-impact hypothesis the Moon was formed from the debris of a collision between the Earth and a Mars-sized protoplanet.
is iron and copper brittle
Answer:
no
Explanation:
they are metal and there property is strong and hard
what is acceleration produced by a force of 12 newton exerted on an object of mass 3kg
Answer:
a=F/m
a=12N/3kg (here newton can be written as kgm/s^2 so kg will be cancelled)
a=4m/s^2
Explanation:
The graph below shows the number of sunspots observed between 1750 and 2000.
Based on the graph, which of these periods most likely witnessed the greatest increase in solar radiation
Answer:
1950 cause it's clearly shown in graph that it has the highest sunspot number .
A baseball weights 1429 (0.142kg) were striked with force of 120N. Calculate its acceleration at
that time. Include the correct unit with your answer. Include one decimal place.
Answer:
a=845.07 m/s2
Explanation:
m=0.142kg
F=120N
a=?
F=m*a /:m
a=F/m
a=120N/0.142kg
a=845,07m/s2
Answer:
a = 845.07 m/s²
Explanation:
As we know ,
as per newton's 2nd law:-
F = ma
therefore
a = F/m
given:
a = ?
F = 120N
m = 0.142 kg
procedure:-
a = 120/0.142
therefore :
a = 845.07 m/s²
El salto con garrocha es practicado por:
A. Solo hombres
B. Solo mujeres
C. N.A
D. Solo a y b
Convert 400 mm to m using the method of dimensional analysis
Answer:
To convert 400 mm to m you can apply the formula [m] = [mm] / 1000; use 400 for mm. Thus, the conversion 400 mm m is the result of dividing 400 by 1000. 0.4
PLEASE MARK AS BRAINLIEST ANSWER