A 10kg block with an initial velocity of 10 m/s slides 1o m across a horizontal surface and comes to rest. it takes the block 2 seconds to stop. The stopping force acting on the block is about

Answer:

Their is a direct relationship between the number of batteries and the increase in power. The voltage is the product of the number of batteries and the voltage which is 9 volts. As the batteries touch ends the voltages of all three combines.

Explanation:

Answer:

The direction of the magnetic field on point P, equidistant from both wires, and having equal magnitude of current flowing through them will be pointed perpendicularly away from the direction of the wires.

Explanation:

Using the right hand grip, the direction of the magnet field on the wire M is counterclockwise, and the direction of the magnetic field on wire N is clockwise. Using this ideas, we can see that the magnetic flux of both field due to the currents of the same magnitude through both wires, acting on a particle P equidistant from both wires will act in a direction perpendicularly away from both wires.

Answer:

Explanation:

From the question we are told that

    The radius is  [tex]r = 1.4 \ mm = 1.4 *10^{-3} \ m[/tex]

     The  current is  [tex]I = 4.5 \ A[/tex]

Generally the electric field is mathematically represented as

         [tex]E = \frac{J}{\sigma }[/tex]

Where [tex]\sigma[/tex] is the conductivity of  aluminum with value [tex]\sigma = 3.5 *10^{7} \ s/m[/tex]

J is the current density which mathematically represented as  

      [tex]J = \frac{I}{A}[/tex]

Here A is the cross-sectional area which is mathematically represented as  

       [tex]A = \pi r^2[/tex]

       [tex]A = 3.142 * (1.4*10^{-3})^2[/tex]

       [tex]A = 6.158*10^{-6} \ m^2[/tex]

So

    [tex]J = \frac{ 4.5 }{6.158*10^{-6}}[/tex]

    [tex]J = 730757 A/m^2[/tex]

So

       [tex]E = \frac{ 730757}{3.5*10^{7} }[/tex]

       [tex]E = 0.021 \ N/C[/tex]

 wavefront is the long edge that moves, for example, the crest or the trough

Answer:

2.29e-9C/m²

Explanation:

Using E = σ/ε₀ means the force on the electron is F = eE = eσ/ε₀.

The work done on the electron is W = Fd = deσ/ε₀. This equals the kinetic energy lost, ½mv².

½mv² = deσ/ε₀

d = 75cm – 15cm = 60cm = 0.6m

σ = mv²ε₀/(2de)

. .= 9.11e-31 * (7.4e6)² * 8.85e-12 / (2 * 0.6 * 1.6e-19)

. .= 2.29e-9 C/m² (i.e. 2.29x10^-9 C/m²)

Answer:

d. unchanged.

Explanation:

The frequency of a wave is dependent on the speed of the wave and the wavelength of the wave. The frequency is characteristic for a wave, and does not change with distance. This is unlike the amplitude which determines the intensity, which decreases with distance.

In a wave, the velocity of propagation of a wave is the product of its wavelength and its frequency. The speed of sound does not change with distance, except when entering from one medium to another, and we can see from

v = fλ

that the frequency is tied to the wave, and does not change throughout the waveform.

where v is the speed of the sound wave

f is the frequency

λ is the wavelength of the sound wave.

Explanation:

Given that,

Frequency of LCR circuit is 120 Hz

RMS voltage, [tex]V_{rms}=82\ V[/tex]

Resistance of circuit, R = 71 Ω

Impedance, Z = 107 Ω

We need to find the average power is delivered to the circuit by the source. Firstly, finding the rms value of current,

[tex]I_{rms}=\dfrac{V_{rms}}{Z}\\\\I_{rms}=\dfrac{82}{105}\\\\I_{rms}=0.78\ A[/tex]

Power is given by :

[tex]P=I_{rms}V_{rms}\cos\phi[/tex]

[tex]\cos\phi = \dfrac{R}{Z}\\\\\cos\phi = \dfrac{71}{105}\\\\\cos\phi =0.676[/tex]

Now, power,

[tex]P=0.78\times 82\times 0.676\\\\P=43.23\ W[/tex]

So, the average power of 43.23 watts is delivered to the circuit by the source.

Answer:

F = 4212 N

Explanation:

Given that,

Mass of a car, m = 1300 kg

Speed of car on the road is 9 m/s

Radius of curve, r = 25 m

We need to find the magnitude of the unbalanced force that steers the car out of its natural straight-  line path. The force is called centripetal force. It can be given by :

[tex]F=\dfrac{mv^2}{r}\\\\F=\dfrac{1300\times 9^2}{25}\\\\F=4212\ N[/tex]

So, the force has a magnitude of 4212 N

Answer:

A) E(r) = 1.3957 × 10^(5) N/C

B) E(r) = 9.8864 × 10⁴ N/C

C) E(r) = 1.13 × 10^(5) N/C

Explanation:

We are given;

q = 6 nc = 6 × 10^(-9) C

L = 10 cm = 0.1 m

d = 4.4 cm = 0.044 m

r1 = 1 cm = 0.01 m

r2 = 2 cm = 0.02 m

r3 = 3 cm = 0.03 m

Formula for the electric field strength in this question is given as;

E(r) = q/(2π(ε_o)rL) + q/(2π(ε_o)(d - r)L)

When factorized, we have;

E(r) = q/(2π(ε_o)L) × [(1/r) + (1/(d - r))]

Plugging in the relevant values for q/(2π(ε_o)L)

We know that (ε_o) has a constant value of 8.854 × 10^(−12) C²/N².m

Thus; q/(2π(ε_o)L) = (6 × 10^(-9))/(2π(8.854 × 10^(−12)0.1) = 1078.53

Thus;

E(r) = 1078.52 [1/r + 1/(d - r)]

A) E1 is at r = 1 cm = 0.01m

Thus;

E(r) = 1078.52 (1/0.01 + (1/(0.044 - 0.01))

E(r) = 1.3957 × 10^(5) N/C

B) E2 is at r = 2 cm = 0.02 m

Thus;

E(r) = 1078.52 (1/0.02 + (1/(0.044 - 0.02))

E(r) = 9.8864 × 10⁴ N/C

C) E2 is at r = 3 cm = 0.03 m

Thus;

E(r) = 1078.52 (1/0.03 + (1/(0.044 - 0.03))

E(r) = 1.13 × 10^(5) N/C

Answer:

Calcium has two electrons in its outer shell.

Explanation:

Calcium is defined as a metal due to its physical and chemical traits. The two outer electrons are very reactive. Calcium has a valence of 2.

Answer:

Impedance increases for frequencies below resonance and decreases for the frequencies above resonance

Explanation:

See attached file

Explanation:

Answer:

The kinetic energy is 25000 J

Explanation:

At the top of the hill, the potential energy = 50000 J

the potential energy = mgh

where m is the mass

g is the acceleration due to gravity

h is the vertical height at the top of the hill

Note the mass of the roller coaster and acceleration due to gravity will always remain constant, so that halfway down the hill, only the height changes by half its initial value.

This means that at halfway down the hill, the potential energy of the roller coaster is

PE = [tex]mg\frac{h}{2}[/tex] = 50000/2 = 25,000 J

We also know that the total mechanical energy of a system is given as

ME = KE + PE = constant

where

ME is the mechanical energy of the system

PE is the potential energy of the system

KE is the kinetic energy of the system

Let us now analyse.

At the top of the hill, all the mechanical energy of the roller coaster is equal to its potential energy due to the height on the hill above ground, since the roller coaster is not moving (kinetic energy is energy due to motion). Halfway down, the mechanical energy of the roller coaster is due to both the kinetic energy and the potential energy, since the roller coaster is moving down, and is still at a given height above the ground. Having all these in mind, we can proceed and say that at halfway down the hill, ignoring friction,

ME = KE + PE = constant

50000 = KE + 25000

therefore

KE = 25000 J

Answer:

Explanation:

Laser angle with water surface is given by: Tan α = 1/2.0= 0.5/

α = 26.56°

Laser angle with Normal = 90 - 26.56 = 63.44 °

Assuming a red laser, refractive index in water is 1.331.

Angle of refraction in water is given by:

Ref Ind = Sin i / Sin r

1.331 = Sin 63.44 / Sin r

Sin r = 0.8945 / 1.331 = 0.6721

Angle r = 42.22°

For the path in water:

Tan 42.22 = x / 3.2

x = 2.9m where x is the lateral displacement of the laser ince it hits the water

So the goggles are 2.0 + 2.9 = 4.9 m from edge of pool

Answer:

The number of interference fringes is  [tex]n = 3[/tex]

Explanation:

From the question we are told that

     The wavelength is  [tex]\lambda = 433 \ nm = 433 *10^{-9} \ m[/tex]

      The distance of separation is  [tex]d = 6 \mu m = 6 *10^{-6} \ m[/tex]

       The  order of maxima is m =  5

The  condition for constructive interference is

       [tex]d sin \theta = n \lambda[/tex]

=>     [tex]\theta = sin^{-1} [\frac{5 * 433 *10^{-9}}{ 6 *10^{-6}} ][/tex]

=>    [tex]\theta = 21.16^o[/tex]

So at  

      [tex]\lambda_1 = 632.9 nm = 632.9*10^{-9} \ m[/tex]

   [tex]6 * 10^{-6} * sin (21.16) = n * 632.9 *10^{-9}[/tex]

=>    [tex]n = 3[/tex]

Answer:

3.67°

Explanation: Given that λ=640nm , m = 1

Considering the slit separation

d = 1cm/1000

= 1.000×10^-3cm

= 1.000×10-5m

We then have

Sinθ = mλ/d

Sinθ= (1×640×10^-9)/1.000×10-5m

Sinθ = 0.064

θ= sin-1 0.064

θ= 3.669°

= 3.67°

1. Based on Scenario A, multiple frames will minimize re-transmission overhead and should be preferred in the encapsulation of packets.

2. Based on Scenario B, the encapsulation of packets should be in a single frame because of the high level of network reliability and accuracy.

Justification:

There will not be further need to re-transmit the packets in a highly reliable and accurate network environment, unlike in an environment that is very prone to errors.  The reliable and accurate network environment makes a single frame economically better.

Encapsulation involves the process of wrapping code and data together within a class so that data is protected and access to code is restricted.

With encapsulation, each layer:

Thus, in a reliable and accurate network environment, single frames should be used to enhance transmission and minimize re-transmission overhead.  This is unlike in an environment that is very prone to errors, where multiple frames should rather be used to minimize re-transmission overhead.

Learn more about encapsulation of packets here: https://brainly.com/question/22471914

Answer

E - 1/2 K x^2      potential energy of compressed spring

E = 1/2 * 4 N / m * (.5 m)^2 = 2 * .5^2 N-m = .5 N-m

Answer:

The  value is  [tex]B = 0.0043 \ T[/tex]

Explanation:

From the question we are told that

   The  length of the solenoid is  [tex]l = 63.5 = 0.635 \ m[/tex]

    The number of turns is  [tex]N = 960 \ turns[/tex]

    The  current is  [tex]I = 2.28 \ A[/tex]

Generally the magnetic field is mathematically represented as

      [tex]B = \mu _o * n * I[/tex]

Where  n is the number of turn per unit length which is mathematically evaluated as

      [tex]n = \frac{N}{l}[/tex]

     [tex]n = \frac{960}{0.635}[/tex]

     [tex]n = 1512 \ turns /m[/tex]

and  [tex]\mu_o[/tex] is the permeability of free space with value  [tex]\mu_o = 4\pi * 10^{-7} N/A^2[/tex]

So  

    [tex]B = 4\pi * 10^{-7} * 1512 * 2.28[/tex]

    [tex]B = 0.0043 \ T[/tex]

Answer

The effect is that it Decreases the field current IF and increases slope K1

Answer:

Explanation:

Formula used for calculating power P = current * voltage

P = IV

From ohms law, V = IR where R is the resistance. Substituting V = IR into the formula for calculating power, we will have;

P = IV

P =(V/R)V

P = V²/R

Given parameters

Power rating of the bulb P = 100 Watts

Source voltage V = 110V

Required

Resistance of the bulb R

Substituting the given parameters into the formula for calculating power to get Resistance R;

P = V²/R

100 = 110²/R

R = 110²/100

R = 110 * 110/100

R = 12100/100

R = 121 ohms

Hence, the resistance of this bulb is 121 ohms

Answer:

Explanation:

In the given case for destructive interference , the condition is,

path difference = (2n+1)λ /2  where n is an integer and λ is wavelength

2 μ d = (2n+1)λ /2

Putting λ = 653 nm

for minimum thickness n = 0

2 μ d = 653 / 2 nm

= 326.5 nm

For constructive interference the condition is

2 μ d = n λ₁

326.5 nm = n λ₁

λ₁ = 326.5 / n  

For n = 1

λ₁ = 326.5 nm ,

or , 326.5nm .

Longest wavelength possible is 326.5

Answer

Integral EdA = Q/εo =C*Vc(t)/εo = 3.5e-12*21/εo = 4.74 V∙m <----- A)

Vc(t) = 21(1-e^-t/RC) because an uncharged capacitor is modeled as a short.

ic(t) = (21/120)e^-t/RC -----> ic(0) = 21/120 = 0.175A <----- B)

Q(0.5ns) = CVc(0.5ns) = 2e-12*21*(1-e^-t/RC) = 30.7pC

30.7pC/εo = 3.47 V∙m <----- C)

ic(0.5ns) = 29.7ma <----- D)

Answer:

x₂ = 0.1715 d

1) false

2) True

3) True

4) false

5) True

Explanation:

The field electrifies a vector quantity, so we can add the creative field by these two charges

             E₂-E₁ = 0

             k q₂ / r₂² - k q₁ / r1₁²= 0

             q₂ / r₂² = q₁ / r₁²

suppose the sum of the fields is zero at a place x to the right of zero

          r₂ = d + x

          r₁ = d -x

we substitute

           q₂ / (d + x)² = q₁ / (d-x)²

we solve the equation

           q₂ / q₁ (d-x)² = (d + x) ²

let's replace the value of the charges

       q₂ / q₁ = + 2q / + q = 2

          2 (d²- 2xd + x²) = d² + 2xd + x²

          x² -6xd + d² = 0

we solve the quadratic equation

          x = [6d ± √ (36d² - 4 d²)] / 2

          x = [6d ± 5,657 d] / 2

          x₁ = 5.8285 d

          x₂ = 0.1715 d

      with the total field value zero it is between the two loads the correct solution is x₂ = 0.1715 d

this value remains on the positive part of the x axis, that is, near charge 1

now let's examine the different proposed outcomes

1) false

2) True

3) True

4) false

5) True

Answer:

The maximum height reached in the second trial is 16times the maximum height reached in the first trial.

Explanation:

The following data were obtained from the question:

First trial

Initial speed (u) = v

Final speed (v) = 0

Second trial

Initial speed (u) = 4v

Final speed (v) = 0

Next, we shall obtain the expression for the maximum height reached in each case.

This is illustrated below:

First trial:

Initial speed (u) = v

Final speed (v) = 0

Acceleration due to gravity (g) = 9.8 m/s²

Height (h₁) =.?

v² = u² – 2gh₁ (going against gravity)

0 = (v)² – 2 × 9.8 × h₁

0 = v² – 19.6 × h₁

Rearrange

19.6 × h₁ = v²

Divide both side by 19.6

h₁ = v²/19.6

Second trial

Initial speed (u) = 4v

Final speed (v) = 0

Acceleration due to gravity (g) = 9.8 m/s²

Height (h₂) =.?

v² = u² – 2gh₂ (going against gravity)

0 = (4v)² – 2 × 9.8 × h₂

0 = 16v² – 19.6 × h₂

Rearrange

19.6 × h₂ =16v²

Divide both side by 19.6

h₂ = 16v²/19.6

Now, we shall determine the ratio of the maximum height reached in the second trial to that of the first trial.

This is illustrated below:

Second trial:

h₂ = 16v²/19.6

First trial:

h₁ = v²/19.6

Second trial : First trial

h₂ : h₁

h₂ / h₁ = 16v²/19.6 ÷ v²/19.6

h₂ / h₁ = 16v²/19.6 × 19.6/v²

h₂ / h₁ = 16

h₂ = 16 × h₁

From the above illustrations, we can see that the maximum height reached in the second trial is 16times the maximum height reached in the first trial.

Answer:

30.93 cm

Explanation:

Given that:

A person with a near point of 85 cm, but excellent distance vision normally wears corrective glasses

The power of the old pair of lens p = 2.25 diopters

The focal point length = 1/p

The focal point length =  1/2.25

The focal point length = 0.444 m

The focal point length = 44.4 cm

The near point of the person from the glass = (85 -2)cm , This is because the glasses are usually 2 cm from the lens

The near point of the person from the glass = 83 cm

Let consider s' to be the image on the same sides of the lens,

∴ s' = -83 cm

We known that:

the focal length of a mirror image 1/f =1/u +1/v

Assume the near point is at an excellent distance s from the glass where the person wears the corrective glasses.

Then:

1/f = 1/s + 1/s'

1/s = 1/f - 1/s'

1/s = (s' -f)/fs'

s = fs'/(s'-f)

s =( 44.4× -83)/(-83 - 44.4)

s = - 3685.2 / - 127.4

s = 28.93 cm

Thus , the near distance point measured from the eye wearing the old glasses, if they rest 2.0 cm in front of the eye = (28.93 +2.0)cm

= 30.93 cm

Answer:

B. -40 kgm/s is the answer

Answer:

so the probability will be = 0.062

Standard deviation =  0.8925

Explanation:

The probability of rain = 15% = 15/100= 0.15

and the probability of no rain=q = 1-p= 1-0.15= 0.85

The number of trials = 7

so the probability will be

7C3 * ( 0.15)^3 (0.85)^4= 35* 0.003375 * 0.52200 =0.06166= 0.062

Taking this as binomial as the p and q are constant and also the trials are independent .

For a binomial distribution

Standard deviation = npq= 0.15 *0.85 *7= 0.8925

Answer: i think it is d. none of them.

Explanation: The speed of light in a vacuum is 186,282 miles per second and so when you look and the answer choices and the question it doesnt make any since.

Answer:

The correct choice is B & E.  

Explanation:

A solenoid is a coil of wire (usually copper) which is used as an electromagnet. Solenoids are used to convert electrical energy to mechanical energy. When this type of device is created it is also called a solenoid. One can increase the energy density within the solenoid or the coil by upping the electric current in the coil.

Cheers!

A roller coaster uses 800 000 J of energy to get to the top of the first hill. During this climb, it gains 500 000 J of potential energy and pauses for a fraction of a second at the very top before heading down the other side. At the top of the hill total, the kinetic energy of the roller coaster would be zero as the velocity is zero at the top of the hill, therefore the total mechanical energy is only because of potential energy.

Mechanical energy is the combination of all the energy in motion represented by total kinetic energy and the total stored energy in the system which is represented by total potential energy.

The expression for total mechanical energy is as follows

ME= KE+PE

As total mechanical energy is the sum of all the kinetic as well as potential energy stored in the system.As given in the problem a roller coaster uses 800000 J of energy to get to the top of the first hill. During this climb, it gains 500 000 J of potential energy which means 300000 J of energy is lost in the frictional energy while climbing the hill,

Thus at the top of the hill, the total energy of the roller coasters is only due to the potential energy.

Learn more about mechanical energy from here brainly.com/question/12319302

#SPJ2