Answer:
displacements are 0.776m, 0.114m
Explanation:
We were given mass of 26-g rifle bullet , then we can convert to Kg since
Momentum is conserved here.
The initial momentum before impact = (Mi * Vi)
Where Mi= initial given mass
Vi=initial velocity given
= 0.026 * 220 = 5.72 kgm/s
The final momentum after impact is (Mf * Vf )
Mf= final mass
5.72=( 3.82* Vf )
= 5.72/ 3.82
= 1.497 m/s
the speed of the pendulum bob with bullet afterwards= 1.497 m/s
the total energy after the collision is the addition of the kinetic energy of the bob+bullet and the potential energy of the bob and bullet, potential energy can be taken as zero.
M = 3.82 kg the mass of the bob containing the bullet
E(total) = ¹/₂MV² = 1/2 * (3.82kg)*(1.497m/s)² = 4.280J
When the Bob got to highest point the kinetic energy is zero and the potential energy is due to the increase in height of the bob, and the addition of the potential and kinetic energies still equal the total energy from before
E(total) = Mgh + 0 = Mgh = 4.280J
solving for h and substituting,
h = 4.280 J/(9.8m/s^2*3.82kg) = 0.114 m
Since the height is found,we the angle of the pendulum at the top of the swing can also be determined
A = arccos[(2.7 - 0.114) / 2.7] or A = 16.71degrees
Since A is known, the displacement along the horizontal axis can be calculated as
x = 2.7* sin(A) = 0.776m
therefore, displacement is 0.776m, 0.114m
the vertical and horizontal component of the pendulum's maximum displacement are displacement is 0.776m, 0.114m
A massage technique that consists of applying pressure to specific points of the face and body to release muscle tension, stimulate and restore balance (chi) is known as
Answer:Acupressure
.
.
..
But why post this question in Physics
Select the correct answer.
What is abstraction?
OA. the concept that software architecture can be separated into modules and that each module can be examined independently
OB. the process of containing information within a module, preventing any crossover or access to Irrelevant information
OC. the process of splitting a program both horizontally and vertically
OD. the process of cutting down irrelevant information so only the information that is useful for a particular purpose remains
Reset
Next
2021 Edmentum. All rights reserved.
O
Sign out
4:
Answer:
OD. The process of cutting down irrelevant information so only the information that is useful for particular purpose remains
Abstraction is the process of cutting down irrelevant information so only the information that is useful for a particular purpose remains.
What is abstraction?Abstraction is the practice of removing anything from a set of core features by eliminating or deleting attributes.
One of the three core ideas of object-oriented programming is abstraction order to decrease complexity and maximize efficiency, a programmer uses abstraction to conceal all but the important facts about an object.
Abstraction is the process of cutting down irrelevant information so only the information that is useful for a particular purpose remains.
Hence option D is correct.
To learn more about the abstraction refer to the link;
https://brainly.com/question/13072603
A radiation worker is subject to a dose of 200 mrad/h of maximum QF neutrons for one 40 h work week. How many times the yearly allowable effective dose did she receive?
Answer:
16 times.
Explanation:
The rate of the radiation dose is , R = 200 ×10^{-3} rad/hr
Time consumed, t = 40 hr
The magnitude of Q.F for the neutrons, Q.F = 2
Thus the effective radiation dose is:
[tex]R_{Eff} = Rt(Q.F) \\= 200 \times 10^{-3} \frac{rad}{hr} (40hr)(2) \\= 16 \ rad[/tex]
Thus, the effective dose allowable yearly = 16 times
PLEASE HELP FAST The object distance for a convex lens is 15.0 cm, and the image distance is 5.0 cm. The height of the object is 9.0 cm. What is the height of the image?
Answer:
The image height is 3.0 cm
Explanation:
Given;
object distance, [tex]d_o[/tex] = 15.0 cm
image distance, [tex]d_i[/tex] = 5.0 cm
height of the object, [tex]h_o[/tex] = 9.0 cm
height of the image, [tex]h_i[/tex] = ?
Apply lens equation;
[tex]\frac{h_i}{h_o} = -\frac{d_i}{d_o}\\\\ h_i = h_o(-\frac{d_i}{d_o})\\\\h_i = -9(\frac{5}{15} )\\\\h_i = -3 \ cm[/tex]
Therefore, the image height is 3.0 cm. The negative values for image height indicate that the image is an inverted image.
A block weighing 400 kg rest on a horizontal surface and supports on top of it another block of weight 100 kg placed on the top of it as shown. The block W2 is attached to a vertical wall by a string 6 m long. Ifthe coefficient of friction between all surfaces is 0.25 and the system is in equilibrium find the magnitude of the horizontal force P applied to the lower block.
The horizontal force applied to the lower block is approximately 1,420.85 Newtons
The known parameters are;
The mass of the block, m₁ = 400 kg, weight, W₁ = 3,924 N
The mass of the block resting on the first block, m₂ = 100 kg, weight, W₂ = 981 N
The length of the string attached to the block, W₂, l = 6 m
The horizontal distance from the point of attachment of the second block to the block W₂, x = 5 m
The coefficient of friction between the surfaces, μ = 0.25
Let T represent the tension in the string
The upward force on W₂ due to the string = T × sin(θ)
The normal force of W₁ on W₂, N₂ = W₂ - T × sin(θ)
The tension in the string, T = N₂ × μ × cos(θ)
∴ T = (W₂ - T × sin(θ)) × μ × cos(θ)
sin(θ) = √(6² - 5²)/6
cos(θ) = 5/6
∴ T = (981 - T × √(6² - 5²)/6) × 0.25 × 5/6
Solving, we get;
T ≈ 183.27 N
The normal reaction on W₂, N₂ = T/(μ × cos(θ))
∴ N₂ = 183.27/(0.25 × 5/6) = 879.7
N₂ ≈ 879.7 N
The friction force, [tex]F_{f2}[/tex] = N₂ × μ
∴ [tex]F_{f2}[/tex] = 879.7 N × 0.25 = 219.925 N
The total normal reaction on the ground, [tex]\mathbf{N_T}[/tex] = W₁ + N₂
[tex]N_T[/tex] = 3,924 N + 879.7 N = 4,803.7 N
The friction force, on the ground [tex]\mathbf{F_T}[/tex] = [tex]\mathbf{N_T}[/tex] × μ
∴ [tex]F_T[/tex] = 4,803.7 N × 0.25 = 1,200.925 N
The horizontal force applied to the lower block, P = [tex]\mathbf{F_T}[/tex] + [tex]\mathbf{F_{f2}}[/tex]
Therefore;
P = 1,200.925 N + 219.925 N = 1,420.85 N
The horizontal force applied to the lower block, P ≈ 1,420.85 N
A small omnidirectional stereo speaker produces waves in all directions that have an intensity of 8.00 at a distance of 4.00 from the speaker.
At what rate does this speaker produce energy?
What is the intensity of this sound 9.50 from the speaker?
What is the total amount of energy received each second by the walls (including windows and doors) of the room in which this speaker is located?
Answer:
A. We have that radius r = 4.00m intensity I = 8.00 W/m^
total power = power/ Area ( 4πr2)= 8.00 w/m^2( 4π ( 4.00 m)2=1607.68 W
b) I = total power/ 4πr2= 8.00 W/m2 ( 4.00 m/ 9.5 m)2= 1.418 W/m2
c) E = total power x time= 1607 . 68 W x 1s= 1607.68 J
When you have a straight horizontal line on a velocity time graph, what does this tell you about the object’s motion in terms of velocity and acceleration?
Answer:
It tell you that the velocity is constant, what means that there's no acceleration
What is Matter? write its types
According to definition of general chemistry matter is any substance which has atleast a mass and occupies a volume.
Matter is of three types
SolidLiquidGasthe atomic number of a nucleus increases during which nuclear reactions
Answer:
Answer A : Fusion followed by beta decay (electron emission)
Explanation:
Notice that you want the Atomic number to increase, that is the number of protons in a nucleus. So if all four cases given experience the same fusion of nuclei, the only one that net increases the number of protons in the last stage, is the reaction that undergoes a beta decay (with emission of an electron) thus leaving a positive imbalance of positive charge (proton generated in the beta decay of a neutron).
Therefore, answer A is the correct one.
Answer:
A : Fusion followed by beta decay (electron emission)
Explanation:
Ap3x
Five wheels are connected as shown in the figure. Find the velocity of the block “Q”, if it is known that: RA= 5 [m], RB= 10 [m], RD= 6 [m], RE=12 [m].
Answer:
-5 m/s
Explanation:
The linear velocity of B is equal and opposite the linear velocity of E.
vB = -vE
vB = -ωE rE
10 m/s = -ωE (12 m)
ωE = -0.833 rad/s
The angular velocity of E is the same as the angular velocity of D.
ωE = ωD
ωD = -0.833 rad/s
The linear velocity of Q is the same as the linear velocity of D.
vQ = vD
vQ = ωD rD
vQ = (-0.833 rad/s) (6 m)
vQ = -5 m/s
The cylinder is displaced 0.17 m downward from its equilibrium position and is released at time t = 0. Determine the displacement y and the velocity v when t = 3.1 s. The displacement and velocity are positive if downward, negative if upward. What is the magnitude of the maximum acceleration?
Complete Question
The image of this question is shown on the first uploaded image
Answer:
a
[tex]d =0.161 \ m[/tex]
b
[tex]v = - 0.054 \ m/s[/tex]
c
[tex]a = 6.12 \ m/s^2[/tex]
Explanation:
From the question we are told that
The maximum displacement is A = 0.17 m
The time considered is [tex]t = 3.1 \ s[/tex]
The spring constant is [tex]k = 137 \ N \cdot m[/tex]
The mass is [tex]m = 3.8 \ kg[/tex]
Generally given that the motion which the cylinder is undergoing is a simple harmonic motion , then the displacement is mathematically represented as
[tex]d = A cos (w t )[/tex]
Where [tex]w[/tex] is the angular frequency which is mathematically evaluated as
[tex]w = \sqrt{\frac{k}{m} }[/tex]
substituting values
[tex]w = \sqrt{\frac{137}{ 3.8} }[/tex]
[tex]w =6[/tex]
So the displacement is at t
[tex]d = 0.17 cos (6 * 3.1 )[/tex]
[tex]d =0.161 \ m[/tex]
Generally the velocity of a SHM(simple harmonic motion) is mathematically represented as
[tex]v = - Asin (wt)[/tex]
substituting values
[tex]v = - 0.17 sin ( 6 * 3.1 )[/tex]
[tex]v = - 0.054 \ m/s[/tex]
Generally the maximum acceleration is mathematically represented as
[tex]a = w^2 * A[/tex]
substituting values
[tex]a_{max} = 6^2 * (0.17)[/tex]
substituting values
[tex]a = 6^2 * (0.17)[/tex]
[tex]a = 6.12 \ m/s^2[/tex]
One solenoid is centered inside another. The outer one has a length of 54.0 cm and contains 6750 coils, while the coaxial inner solenoid is 4.00 cm long and 0.170 cm in diameter and contains 21.0 coils. The current in the outer solenoid is changing at 35.0 A/s .What is the mutual inductance of the solenoids?Find the emf induced in the inner solenoid.
Answer:
M₁₂ = 1.01 10⁻⁴ H , Fem = 3.54 10⁻³ V
Explanation:
The mutual inductance between two systems is
M₁₂ = N₂ Ф₁₂ / I₁
where N₂ is the number of turns of the inner solenoid N₂ = 21.0, i₁ the current that flows through the outer solenoid I₁ = 35.0 A / s and fi is the flux of the field of coil1 that passes through coil 2
the magnetic field of the coil1 is
B = μ₀ n I₁ = μ₀ N₁/l I₁
the flow is
Φ = B A₂
the area of the second coil is
A₂ = π d₂ / 4
Φ = μ₀ N₁ I₁ / L π d² / 4
we substitute in the first expression
M₁₂ = N₂ μ₀ N₁ / L π d² / 4
M₁₂ = μ₀ N₁ N₂ π d² / 4L
d = 0.170 cm = 0.00170 m
L = 4.00 cm = 0.00400 m
let's calculate
M₁₂ = 4π 10⁻⁷ 6750 21 π 0.0017²/ (4 0.004)
M₁₂ = π² 0.40966 10⁻⁷ / 0.004
M₁₂ = 1.01 10⁻⁴ H
The electromotive force is
Fem = - M dI₁ / dt
Fem = - 1.01 10⁻⁴ 35.0
Fem = 3.54 10⁻³ V
A hammer is used to hit a nail into a board. Which statement is correct about the forces at play between the nail and the hammer?
O The nail exerts a much smaller force on the hammer in the opposite direction
O The nail exerts a much smaller force on the hammer in the same direction.
The nail exerts an equal force on the hammer in the same direction.
O The nail exerts an equal force on the hammer in the opposite direction.
Answer:
reviewing the final statements, the correct one is the quarter
The nail exerts an equal force on the hammer in the opposite direction.
Explanation:
This is an action-reaction problem or Newton's third law, which states that forces in naturals occur in pairs.
This is the foregoing, the hammer exerts a force on the nail of magnitude F and it will direct downwards, if we call this action and the nail exerts a force on the hammer of equal magnitude but opposite direction bone directed upwards, each force is applied in one of the bodies.
The difference in result that each force is that the force between the nail exerts a very high pressure (relation between the force between the nail area), instead the area of the hammer is much greater, therefore the pressure is small.
When reviewing the final statements, the correct one is the quarter
The nail exerts an equal force on the hammer in the opposite direction.
5. A body falls freely from rest. It covers as much distance in the last second of its
motion as covered in the first three seconds. The body has fallen for a time of:
B) 5s
C) 7s
D) 9s
A) 35
Answer:
B 5s
Explanation:
Because of the Displacement in the nth second of the free fall is
Snth=21g(t12−t22)
Given that (tn−tn−1)=1
Displacement in 3 seconds of the free fall
S=21gt2
S=21×10×32
S=45m
Given that: Snth=45
On solving that we get:
t1=5sec
You are outdoors when you hear the constant chirp of a still cricket. You start walking toward the cricket and at some point you are able to detect that the intensity of the chirp of the cricket has increased by a factor of 4. What of the following statements is true at your new position with respect to the cricket?
a. The power delivered by the sound wave you hear has doubled.
b. The speed of the sound wave emitted by the cricket has decreased by a factor of 4.
c. The distance between you and the cricket has decreased by a factor of 2
Answer:
C
Explanation:
intensity = Power delivered by the sound (Watt)/ Surounding Area (m²)
I = P/A
A = πr²
r = is the distance between you and the cricket.
so in other form we can get
I = P/πr²
let take I(1) as first intensitilynyou heard and I(2) as the increased intensity.
I(1) / I(2) = r(2)² / r(1)²
1/4 = r(2)²/r(1)²
1/2 = r(2) / r(1)
r(2) = ½ r(1)
or r(2) is decreaases by a factor of 2.
A plastic box with objects has a mass of 4 kg and is on a shelf at a height of 2.4 m. What will it's potential gravitational energy?
Answer:
potential energy=mgh
4×9.8×2.4
Explanation:
may be hope this will help you
We observe that a moving charged particle experiences no magnetic force. From this we can definitely conclude that:_______
a. no magnetic field exists in that region of space.
b. the particle must be moving parallel to the magnetic field.
c. the particle is moving at right angles to the magnetic field.
d. either no magnetic field exists or the particle is moving parallel to the magnetic field.
e. either no magnetic field exists or the particle is moving perpendicular to the magnetic field.
Answer:
b. the particle must be moving parallel to the magnetic field.
Explanation:
The magnetic force on a moving charged particle is given by;
F = qvBsinθ
where;
q is the charge of the particle
v is the velocity of the particle
B is the magnetic field
θ is the angle between the magnetic field and velocity of the moving particle.
When is the charge is stationary the magnetic force on the charge is zero.
Also when the charge is moving parallel to the magnetic field, the magnetic force is zero.
Therefore, when a moving charged particle experiences no magnetic force, we can definitely conclude that the particle must be moving parallel to the magnetic field.
b. the particle must be moving parallel to the magnetic field.
importance of SI system in points
Answer:
SI unit is an international system of measurements that are used universally in technical and scientific research to avoid the confusion with the units. Having a standard unit system is important because it helps the entire world to understand the measurements in one set of unit system.
A 180-km-long high-voltage transmission line 2.00 cm in diameter carries a steady current of 1,050 A. If the conductor is copper with a free charge density of 8.50 1028 electrons per cubic meter, how many years does it take one electron to travel the full length of the cable
Answer:
27yrs
Explanation:
h= difference in height between the initial position and the bottom position
We are told that the rope is L = 2.30 m long and inclined at 45.0° from the vertical
h=L-Lcos(x)= L(1-cosx)=2.30(1-cos45)
=0.674m
Potential Energy = 28× 9.8×0.674
=184.9J
B)we can see that at the bottom of the motion, all the initial potential energy of the child has been converted into kinetic energy:
E= 0.5mv^2
In _____ research, a group of people of one age is compared to a group of people who are another age.
Answer:
cross-sectional
Explanation:
The full definition of this is ''a research design in which several different age-groups of participants are studied at one particular point in time.''
Under normal circumstances: _________
a. Fetal Hb binds to oxygen more tightly than Mb binds.
b. Fetal Hb binds oxygen more tightly in the absence of 2,3-BPG.
c. Fetal Hb does not bind to oxygen.
d. Adult Hb has the lowest affinity for oxygen of the 3.
e. More than one of these statements is correct.
Answer:
Fetal Hb binds oxygen more tightly than adult Hb (not option a)
Find the current through a person and identify the likely effect on her if she touches a 120 V AC source in the following circumstances. (Note that currents above 10 mA lead to involuntarily muscle contraction.)
(a) if she is standing on a rubber mat and offers a total resistance of 300kΩ
(b) if she is standing barefoot on wet grass and has a resistance of only 4000kΩ
Answer:
A) 0.4 mA
B) 0.03 mA
Explanation:
Given that
voltage source, V = 120 V
to solve this question, we would be using the very basic Ohms Law, that voltage is proportional to the current and the resistance passing through the circuit, if temperature is constant.
mathematically, Ohms Law, V = IR
V = Voltage
I = Current
R = Resistance
from question a, we were given 300kΩ, substituting this value of resistance in the equation, we have
120 = I * 300*10^3 Ω
making I the subject of the formula,
I = 120 / 300000
I = 0.0004 A
I = 0.4 mA
Question said, currents above 10 mA causes involuntary muscle contraction, this current is way below 10 mA, so nothing happens.
B, we have Resistance, R = 4000kΩ
Substituting like in part A, we have
120 = I * 4000*10^3 Ω
I = 120 / 4000000
I = 0.00003 A
I = 0.03 mA
This also means nothing happens, because 0.03 mA is very much lesser compared to in the 10 mA
The current through a person will be:
a) 0.4 mA
b) 0.03 mA
Given:
Voltage, V = 120 V
Ohm's Law:It states that the voltage or potential difference between two points is directly proportional to the current or electricity passing through the resistance, and directly proportional to the resistance of the circuit.
Ohms Law, V = I*R
where,
V = Voltage
I = Current
R = Resistance
a)
Given: Resistance= 300kΩ
[tex]120 = I * 300*10^3 ohm\\\\I = 120 / 300000\\\\I = 0.0004 A[/tex]
Thus, current will be, I = 0.4 mA
b)
Given: R = 4000kΩ
[tex]120 = I * 4000*10^3 ohm\\\\I = 120 / 4000000\\\\I = 0.00003 A[/tex]
Thus, current will be, I = 0.03 mA
From calculations, we observe that nothing happens, because 0.03 mA is very much lesser compared to in the 10 mA.
Find more information about Current here:
brainly.com/question/24858512
Did the kinetic frictional coefficient (for the wood/aluminum and felt/aluminum cases) vary with area of contact
Answer:
Explanation:
Friction is defined as a force which acts at the surface of separation between two objects in contact and tends to oppose motion of one over the other.
While kinetic friction is the force that must be overcome so that a body can move with uniform speed over another.
Hence let consider one of the laws of friction which states that: '' Frictional force is independent of the area of the surfaces in contact.''
The value did not vary with area. This is because when calculating the kinetic fiction, the total contact area is not relevant and only the total weight of the system as well of as the block is put into consideration.
g suppose he used an alpha particle with an energy of 8.3 MeV, what would be the speed of this alpha particle
Answer:
speed of the alpha particle is 2 x 10^7 m/s.
Explanation:
energy of alpha particle = 8.3 Mev
1 Mev = 1.602 x 10^-13 J
8.3 Mev = [tex]x[/tex]
solving, [tex]x[/tex] = 8.3 x 1.602 x 10^-13 = 1.329 x 10^-12 J
mass of a alpha particle = 6.645 x 10^−27 kg
The energy of the alpha particle is the kinetic energy KE of the alpha particle
KE = [tex]\frac{1}{2}mv^{2}[/tex]
where m is the mass of the alpha particle
v is the velocity of the alpha particle
substituting values, we have
1.329 x 10^-12 = [tex]\frac{1}{2}*6.645*10^{-27}*v^{2}[/tex]
[tex]v^{2}[/tex] = 4 x 10^14
[tex]v = \sqrt{4*10^{14} }[/tex] = 2 x 10^7 m/s
Helium-neon laser light (λ = 6.33 × 10−7 m) is sent through a 0.30 mm-wide single slit. What is the width of the central maximum on a screen 1.0 m from the slit?
Answer:
The width is [tex]w_c = 0.00422 \ m[/tex]
Explanation:
From the question we are told that
The wavelength is [tex]\lambda = 6.33*10^{-7} \ m[/tex]
The width of the slit is [tex]d = 0.3\ mm = 0.3 *10^{-3} \ m[/tex]
The distance of the screen is [tex]D = 1.0 \ m[/tex]
Generally the central maximum is mathematically represented as
[tex]w_c = 2 * y[/tex]
Here y is the width of the first order maxima which is mathematically represented as
[tex]y = \frac{\lambda * D}{d}[/tex]
substituting values
[tex]y = \frac{6.33*10^{-7} * 1.0}{ 0.30}[/tex]
[tex]y = 0.00211 \ m[/tex]
So
[tex]w_c = 2 *0.00211[/tex]
[tex]w_c = 0.00422 \ m[/tex]
A 500 kg rocket sled is coasting in reverse at 10 m/s (to the left). It then turns on its rocket engines for 10.0 s, with a thrust of 1500 N (to the right). What is its final velocity? (Remember velocity has magnitude and direction)
Explanation:
F = ma
[tex]a = \frac{f}{m} [/tex]
[tex]a = \frac{1500}{500} = 3[/tex]
[tex]a = \frac{v2 - v1}{t} [/tex]
[tex]3 = \frac{v2 - 10}{10} [/tex]
v2 (final) = 40 m/s to the right direction
A viewing screen is separated from a double slit by 5.20 m. The distance between the two slits is 0.0300 mm. Monochromatic light is directed toward the double slit and forms an interference pattern on the screen. The first dark fringe is 3.70 cm from the center line on the screen.
Required:
a. Determine the wavelength of light.
b. Calculate the distance between the adjacent bright fringes.
Answer:
The wavelength of this light is approximately [tex]427\; \rm nm[/tex] ([tex]4.27\times 10^{-7}\; \rm m[/tex].)The distance between the first and central maxima is approximately [tex]7.40\; \rm cm[/tex] (about twice the distance between the first dark fringe and the central maximum.)Explanation:
WavelengthConvert all lengths to meters:
Separation of the two slits: [tex]0.0300\; \rm mm = 3.00\times 10^{-5}\; \rm m[/tex].Distance between the first dark fringe and the center of the screen: [tex]3.70\; \rm cm = 3.70\times 10^{-2}\; \rm m[/tex].Refer to the diagram attached (not to scale.) Assuming that the screen is parallel to the line joining the two slits. The following two angles are alternate interior angles and should be equal to each other:
The angle between the filter and the beam of light from the lower slit, andThe angle between the screen and that same beam of light.These two angles are marked with two grey sectors on the attached diagram. Let the value of these two angles be [tex]\theta[/tex].
The path difference between the two beams is approximately equal to the length of the segment highlighted in green. In order to produce the first dark fringe from the center of the screen (the first minimum,) the length of that segment should be [tex]\lambda / 2[/tex] (one-half the wavelength of the light.)
Therefore:
[tex]\displaystyle \cos \theta \approx \frac{\text{Path difference}}{\text{Slit separation}} = \frac{\lambda / 2}{3.00\times 10^{-5}\; \rm m}[/tex].
On the other hand:
[tex]\begin{aligned} \cot \theta &\approx \frac{\text{Distance between central peak and first minimum}}{\text{Distance between the screen and the slits}} \\ &= \frac{3.70\times 10^{-2}\; \rm m}{5.20\; \rm m} \approx 0.00711538\end{aligned}[/tex].
Because the cotangent of [tex]\theta[/tex] is very close to zero,
[tex]\cos \theta \approx \cot \theta \approx 0.00711538[/tex].
[tex]\displaystyle \frac{\lambda /2}{3.00\times 10^{-5}\; \rm m} \approx \cos\theta\approx 0.00711538[/tex].
[tex]\begin{aligned}\lambda &\approx 2\times 0.00711538 \times \left(3.00\times 10^{-5}\; \rm m\right) \\ &\approx 4.26 \times 10^{-7}\; \rm m = 426\; \rm nm\end{aligned}[/tex].
Distance between two adjacent maximaIf the path difference is increased by one wavelength, then the intersection of the two beams would move from one bright fringe to the next one.
The path difference required for the central maximum is [tex]0[/tex].The path difference required for the first maximum is [tex]\lambda[/tex].The path difference required for the second maximum is [tex]2\,\lambda[/tex].On the other hand, if the distance between the maximum and the center of the screen is much smaller than the distance between the screen and the filter, then:
[tex]\begin{aligned}&\frac{\text{Distance between image and center of screen}}{\text{Distance between the screen and the slits}} \\ &\approx \cot \theta \\ &\approx \cos \theta \\ &\approx \frac{\text{Path difference}}{\text{Slit separation}}\end{aligned}[/tex].
Under that assumption, the distance between the maximum and the center of the screen is approximately proportional to the path difference. The distance between the image (the first minimum) and the center of the screen is [tex]3.70\; \rm cm[/tex] when the path difference is [tex]\lambda / 2[/tex]. The path difference required for the first maximum is twice as much as that. Therefore, the distance between the first maximum and the center of the screen would be twice the difference between the first minimum and the center of the screen: [tex]2 \times 3.70\; \rm cm = 7.40\; \rm cm[/tex].
Air flows through a converging-diverging nozzle/diffuser. A normal shock stands in the diverging section of the nozzle. Assuming isentropic flow, air as an ideal gas, and constant specific heats determine the state at several locations in the system. Solve using equations rather than with the tables.
Answer:
HELLO your question has some missing parts below are the missing parts
note: The specific heat ratio and gas constant for air are given as k=1.4 and R=0.287 kJ/kg-K respectively.
--Given Values--
Inlet Temperature: T1 (K) = 325
Inlet pressure: P1 (kPa) = 560
Inlet Velocity: V1 (m/s) = 97
Throat Area: A (cm^2) = 5.3
Pressure upstream of (before) shock: Px (kPa) = 207.2
Mach number at exit: M = 0.1
Answer: A) match number at inlet = 0.2683
B) stagnation temperature at inlet = 329.68 k
C) stagnation pressure = 588.73 kPa
D) ) Throat temperature = 274.73 k
Explanation:
Determining states at several locations in the system
A) match number at inlet
= V1 / C1 = 97/ 261.427 = 0.2683
C1 = sound velocity at inlet = [tex]\sqrt{K*R*T}[/tex] = [tex]\sqrt{1.4 *0.287*10^3}[/tex] = 361.427 m/s
v1 = inlet velocity = 97
B) stagnation temperature at inlet
= T1 + [tex]\frac{V1 ^2}{2Cp}[/tex] = 325 + [tex]\frac{97^2}{2 * 1.005*10^{-3} }[/tex]
stagnation temperature = 329.68 k
C) stagnation pressure
= [tex]p1 ( 1 + 0.2Ma^2 )^{3.5}[/tex]
Ma = match number at inlet = 0.2683
p1 = inlet pressure = 560
hence stagnation pressure = 588.73 kPa
D) Throat temperature
= [tex]\frac{Th}{T} = \frac{2}{k+1}[/tex]
Th = throat temperature
T = stagnation temp at inlet = 329.68 k
k = 1.4
make Th subject of the relation
Th = 329.68 * (2 / 2.4 ) = 274.73 k
A brass rod is 185 cm long and 1.60 cm in diameter. What force must be applied to each end of the rod to prevent it from contract- ing when it is cooled from 120.0°C to 10.0°C?
Answer:
42000N
Explanation:
First you calculate how much it would contract, and secondly you then calculate the force to stretch it by that amount.
1) linear thermal expansion coef brass 19e-6 /K
∆L = αL∆T = (19e-6)(1.85)(110) = 0.00387 meter or 3.87 mm
Second part involves linear elasticity.
for brass, young's modulus is 15e6 psi or 100 GPa
cross-sectional area of rod is π(0.008)² = 0.0002 m²
F = EA∆L/L
F = (100e9)(0.0002)(0.00387) / (1.85)
F = 42000 or 42 kN
please help !!!!! please note that two images are there................ i am urgently needs this question
Answer:
can you tell me about this property