Which of the following would cause the force of kinetic friction to increase?
A. A decrease in the normal force
B. An increase in us
C. A decrease in lk
D. An increase in the normal force
Answer:
Increase in μk
Explanation:
different ans set
The lever which makes our work easier only by accelerating the rate of work is:
Answer:
power
Explanation:
it helps to do work without power we cant do any things
The work in a 3rd lever is situated between the load and the pivot. Less effort is required to shift the weight if the pivot is near to it. The weight will travel a longer distance if the pivot is closer to the effort.
What is the mechanical advantage?Mechanical advantage is defined as a measure of the ratio of output force to input force in a system, It is used to analyze the forces in simple machines like levers and pulleys.
Mechanical advantage = output force(load) /input force (effort)
mechanical advantage = velocity ratio ×Efficiency
A lever that swings around a fixed point is the basic component of a lever. The pivot of a lever is its fixed point. A lever, like other machines, facilitates labor by adjusting the force or the length across which the force is applied to the device.
Thus, we can say that the lever which makes our work easier only by accelerating the rate of work is
Learn more about Mechanical advantages here;
brainly.com/question/16617083
#SPJ2
Den pushes a desk 400 cm across the floor. He exerts a force of 10 N for 8 s to move the desk. What is his power output? (Power: P = W/t) 1.25 W 5 W 40 W 500 W
Answer:
5 W
Explanation:
The formula of the power is:
● P = W/t
W is the work and t is the time needed to do it(in seconds)
Let's calculate first the work that the force exerced:
W = Vector F . Vector d
D is the distance ( here 400 cm wich is 4 m)
Make a representation to see how are the vectors F and V.(picture below)
The vector F and d are colinear since Den is pushing the desk on the ground.
● W = 4 × 10 = 40 J
J is Joule
■■■■■■■■■■■■■■■■■■■■■■■■■■
● P = W / t
● P = 40/ 8
● P = 5 W
The power output of the force of 10N for 8 seconds to move the desk is 5 watts. Thus, the correct option is B.
What is Power?Power is the amount of energy which is transferred or converted per unit time. In the SI system of Units, the unit of power is the watt, which is equal to one joule per second time.
We Know, P = W/t
where, P = Power,
W = Work done,
t = Time taken
P = F × s/t
where, F = Force applied,
s = distance travelled,
t = time taken
Here, F = 10N
s = 400cm = 4m
t = 8 sec
Substitute their values into the expression,
P = 10 × 4/8
P = 10 × 1/2
P = 5 Watt
So, the power output will be 5 watts.
Therefore, the correct option is B.
Learn more about Power here:
https://brainly.com/question/287674
#SPJ6
How many degrees are there between the direction of motion and the force of
friction?
A. 270
B. 90
C. 180
D.0
Answer:
180°
Explanation:
Friction, if it exists, ALWAYS opposes motion or attempted motion.
A carnot engine has an efficiency of 50% when its sink temperature is 27°C. The temperature of source is: a) 300°C b) 327°C c) 273°C d) 373°C
327 degrees
Have a great day!
An atom of unknown element Z has mass number of 39 and an atomic number of 18. How many protons and how many neutrons are in this atom? Show your work
Answer:
proton:18
neutron:39-18=21
Use the diagram to answer each question.
Why might a researcher further classify the data in the chimpanzee dier table to include separate information of males and females ?
Answer:
In the data table, we can see the frequency distribution in the diet of a given type of chimpanzee.
Why a researcher further classify the data separating information of males and females?
Well, the objective of the researcher is to find information about these chimpanzees, so if he notices that the diet varies (even slightly) between males and females, separating the information between males and females would be useful to know how the diet varies, and why this happens.
This is the primary motive of why a researcher would want to separate the information of males and females.
'When we see something that exists in real life, there are many different ways to display imagery and importance using art. What the artist _____________ depends on what he/she wants to communicate.'
Answer:
Emphasizes
Explanation:
The expression of an art is intelligible to those that understand it, as such to make an impression an artist has to emphasize the point they want to communicate
An art is an expression of the personal experiences of the artist or a reaction to events or to reveal the realities as seen by the artist such as global warming and the environment, so as to get the attention of people with the goal to change them, such that a good art changes the most people, hence the need for emphasis.
Answer:
A - emphasizes
Classical mechanics (Forces) focuses on studying …
Electricity
Motion of Objects
Living Systems
Atomic Structure
Answer:
Motion of Objects
Explanation:
Motion of Objects
Both Static and Dynamic Forces.
an astronaut takes a tuning fork with her to the moon she strikes it inside the cabin the cabin is normally filled with air so the humans inside the spacecraft are comfortable she also strikes it outside the spacecraft when she gets down on the surface of the moon which of the following is true about the tuning fork?
A: it does not vibrate inside the spacecraft
B: id does not vibrate on moon surface
C: it vibrations are not transmitted inside the spacecraft
D:it's vibrations are not transmitted to the moon's atmosphere
Answer:
d
Explanation:
a and b: it vibrates in both the difference is whether you hear the sound or not the lack or presence of molecules does not hinder the timing fork from vibrating but can hinder you from hearing since sound is a mechanical wave therefore require a medium bringing us to (c) these vibrations are transmitted because there is presence of a medium i.e air molecules so sound can be heard
but in (c) it is true since the vibrations are created but are not transmitted to your ears due to lack of a medium
match the columns
please answer this question
it's urgent
Answer:
1. b
2. e
3. a
4. c
5. d
hope dis helps ^-^
importance of estimation in our lives
Systemic circulation requires help from which of the following bones, lungs, arteries and veins, or muscles
Answer:
Artery and viens
Explanation:
The radius of a small ball is around 3.79747 cm. The radius of a basketball is about 3.16 times larger. What is the ratio of the surface areas of the small ball and a basketball? 2. What is the ratio of their volumes?
Explanation:
The ratio of the areas is the square of the ratio of the radii.
A/A = 3.16² = 9.99
The ratio of the volumes is the cube of the ratio of the radii.
V/V = 3.16³ = 31.6
Which two possible explanations does the video give for why white light changes into colored light? Color is an impurity added to white light by the prism. Color is present in the materials on which white light shines. White light contains seven colors, which are separated by the prism. White light reacts with chemicals in the air to produce seven colors.
Answer:
White light contains seven colors, which are separated by the prism.
White light reacts with chemicals in the air to produce seven colors.
Explanation:
It was first observed by Sir Issac Newton, that when white light is passed through a prism, an elongated, coloured patch of light is obtained on a screen placed behind the prism. The seven colours obtained constitute the spectrum of white light.
In nature, white light is separated into its constituent wavelengths when white light interacts with substances in the atmosphere.
Answer:
The correct answer is “color is an impurity added to white light by the prism.”
and
“White light contains seven colors, which are separated by the prism
Explanation:
At what conditions acceleration of a body is zero?
Answer:
when there is uniform velocity the acceleration of a body is zero
What is your wheel and axle
Explanation:
The wheel and axle is a type of simple machine used to make tasks easier in terms of manipulating force by applying the concept of mechanical advantage.
A 50.5-turn circular coil of radius 4.75 cm can be oriented in any direction in a uniform magnetic field having a magnitude of 0.455 T. If the coil carries a current of 22.5 mA, find the magnitude of the maximum possible torque exerted on the coil.
Answer:
The maximum torque, τ = 3.67 × 10⁻³ Nm
Explanation:
The torque τ = NiABsinθ where N = number of turns of circular coil = 50.5, i = current in circular coil = 22.5 mA = 0.0225 A, A = area of circular coil = πr² where r = radius of circular coil = 4.75 cm = 0.0475 m, B = magnetic field strength = 0.455 T and θ = 90° for maximum torque.
So, τ = NiABsinθ
τ = Niπr²Bsinθ
τ = 50.5 × 0.0225 A × π × (0.0475 m)² × 0.455 T × sin90°
τ = 0.003665 Nm
τ = 3.665 × 10⁻³ Nm
τ ≅ 3.67 × 10⁻³ Nm
So the maximum torque, τ = 3.67 × 10⁻³ Nm
Which statement about the dark nebulae is true? Group of answer choices They can be penetrated only with longer wavelengths such as radio and infrared. They block the vast majority of radio waves from our Galaxy. Hydrogen and helium are the chief absorbing and scattering agents. They can be penetrated only with shorter waves, such as UV and x-ray. Only one is known to exist.
Answer:
They can be penetrated only with longer wavelengths such as radio and infrared.
Explanation:
A dark nebula can be defined as an interstellar cloud that is so dense as a result of high concentration of gas and dust and as such it obscures the visible wavelengths of light from stars behind it, thus appearing completely opaque (dark patch) in front of a bright emission nebula or in regions having plenty stars.
Hence, dark nebulae can be penetrated only with longer wavelengths such as radio and infrared light because they cannot be absorbed by the dust layers or particles coated with frozen carbon monoxide and nitrogen residing in the dark nebulae.
A missile is moving 1350 m/s at a 25° angle it needs to hit a target 23,500 m away in a 55° direction in 10.2 seconds what is the magnitude of its final velocity
Answer:
3504 m/s
Explanation:
Let x be the horizontal component of distance
y - vertical component of distance
t-time
ax- horizontal component of acceleration
ay-Vertical component of acceleration
Vx-horizontal component of velocity
Vy-Vertical component of velocity
horizontally: x = V_x ×t + ½×a_x×t²
plugging the values we get
23500× cos 55º = 1350×cos25.0º × 10.20 + ½×a_x× (10.20)²
⇒ax = 19.2 m/s²
Moreover,
V'x = V_x + a_x×t = 1350×cos25.0º + 19.2×10.20= 1419 m/s
similarly in vertical direction:
y = V_y×t + ½×a_y×t²
23500×sin55º = 1350×sin25.0º×10.20s + ½×a_y×(10.20)²
⇒a_y = 258 m/s²
Also,
V'y = V_y + a_y×t = 1350×sin25.0º + 258×10.20 = 3204 m/s
Therefore
V = √(V'x² + V'y²) = 3504 m/s
therefore, magnitude of final velocity of missile=3504 m/s
THANKS
3
5.0
(7 votes)
Not the answer you're looking for?
FIND MORE
Previous
Next
Manetho
Manetho
Rank: Ambitious
29830/500
0/5
Your influence
1
14h : 28m
Answering Streak
Answer a question in time to keep your streak going and the unlocks coming.
Fun fact
An apple, potato, and onion all taste the same if you eat them with your nose plugged
1
2
2
Get +4
bonus
2
3
3
Get +6
bonus
3
Last 7 days
Overall
Your stats from the last 7 days compared with the previous 7 days
Popularity
881
People learning from your answers.
+4%
Brainliest
How many centimeters (cm) are in 1 mile? _
Knowns:
1.61 kilometer (km) = 1 mile
1000 meter (m) = 1 kilometer (km)
100 centimeter (cm) - 1 m
Answer:
161,000 cm
Explanation:
1 mi × (1.61 km/mi) × (1000 m/km) × (100 cm/m) = 161,000 cm
A car is moving with the velocity of 90km/h. If the car come to rest after 10 seconds. Calculate the final velocity and distance covered by the car within that time.
plz wirte the full formula
Answer:
you can learn from here
https://www.toppr.com/ask/en-bd/question/a-car-is-moving-with-a-velocity-of-10-ms-the-driver-sees-a-wall/
which of the following best describes the kinetic theory model?
a. all particles in matter eventually stop moving
b. energy changes have no effect on the state of matter
c. when particles in matter gain or lose energy , they change state
d. no matter how much energy is present particles never move
Answer:
Answer c: "when particles in matter gain or lose energy , they change state"
Explanation:
As energy is provided to the molecules of the substance in question, they acquire more speed or vibration, increasing their separation in the substance, which can become then a liquid , or a gas. The reverse path also happens as the particles give away energy.
Answer:
c. when particles in matter gain or lose energy , they change state
we know that for example, if you add heat (energy) to ice it would melt (change state) or if you freeze water (change state) it would become ice.
Which describes a grizzly bear’s habitat? all the biotic factors in the ecosystem all the abiotic factors in the ecosystem the role of the bear in the ecosystem the physical area where the bear lives
Answer:
I found this question elsewhere on brainly and the answer was verified. Here it is!
Explanation:
Grizzly bear habitats is the habitat or the physical space where the bear lives. Grizzly bears can be found in many different habitats from dense forests to subalpine meadows, arctic tundra and open plains. We can also conclude that all of the bears live in grizzly bear's habitat in order to survive.
The best description of a grizzly bear’s habitat is:
D. the physical area where the bear livesA habitat is the natural surrounding or place where an organism lives, grows and competes with other organisms for resources. It is a physical area.
There are three major types of habitat which includes:
Freshwater habitat: This refers to the area of water where animals live. Examples of animals that live in a freshwater habitat includes: sea turtle, fishes, etc. Examples of freshwater habitat include:RiversLakesPond, etcMarine water habitat: This is where a group of organisms live. Examples include:OceansSeas, etc.Coastal habitat: This is an intersection between the land and sea habitats.A grizzly bear is a subspecies of brown bear and is resident in the northern plains of America and their habitat is a physical location where they live.
Therefore, the correct answer is option D
Read more here:
https://brainly.com/question/19482426
What is pin hole camera?
Answer:
Explanation:
Pinhole camera is a simple camera. It does not have a lens. The light passes from a hole and an inverted image is formed on the opposite side of the box.
How much does the speed of a car increase if it accelerates
uniformly at 2.5 meters per second squared for 5 seconds?
Answer:
12.5 m/s
Explanation:
a = Δv / Δt
2.5 m/s² = Δv / 5 s
Δv = 12.5 m/s
Shortly after receiving a traffic ticket for speeding, Fred made numerous comments about the road signs being inadequate and is GPS telling him a different speed limit. This would be an example of:
Answer:
External locus of control
Explanation:
External locus of control is an attitude people possess that makes them attribute their failures or successes to factors other than themselves. The opposite of this type of attitude is the Internal locus of control where the individuals take responsibility for the outcomes of their actions whether good or bad. One good thing about the external locus of control is that when the individuals with this characteristic record successes, they attribute it to others and this presents them as people with team spirit. However, when they record failures, they do not want to take the blame, but rather attribute it to others.
Fred exhibits an external locus of control because he attributed his speeding to other factors like the road signs and GPS instead of fully admitting that it was his fault.
can ya pls answer dis rq!
Answer:
I don't even know can u tell me how to ask questions
Six members of a synchronized swim team wear earplugs to protect themselves against water pressure at depths, but they can still hear the music and perform the combinations in the water perfectly. One day, they were asked to leave the pool so the dive team could practice a few dives, and they tried to practice on a mat, but seemed to have a lot more difficulty. Why might this be
Answer:
The sound travels differently in different medium according the density of the medium.
Explanation:
The sound travels faster in dense medium and can be heard by the vibration of the bone present in the ear. The ear plugs reduce the sound intensity in both medium water and on land (air).
In air the sound is not heard properly due to the earplugs that stops the as the vibration are not able to produce as sound is not able to reach to middle ear, but Navy researchers have discovered that sound under water is heard by the bone present behind the ear, vibrations mastoid.
Which of the following is the correct equation to calculate electrical energy? P = I/V V = P × I P = I × V E = P × t
You haven't told us what any of those letters represents.
I'm going to assume that ...
-- ' P ' = power
-- ' I ' = circuit current
-- ' V ' = circuit voltage
-- ' E ' = energy
-- ' t ' = time.
Now I'm ready to answer the question that I just invented.
P = I / V
V = P x I
Both of these are false statements, and can't be used to calculate anything.
P = I x V is the correct equation to calculate electrical power.
E = P x t is the correct equation to calculate electrical energy.