Answer:
x = 27.3 m
Explanation:
This is a projectile launching exercise, let's start by looking for the time it takes for the rock to reach the height of the window.
Let's use trigonometry to find the velocities of the rock
sin 40 = [tex]v_{oy}[/tex] / v
cos 40 = v₀ₓ / v
v_{oy}= v sin 40
v₀ₓ = v cos 40
v_{oy} = 30 sin 40 = 19.28 m / s
v₀ₓ = v cos 40
v₀ₓ = 30 cos 40 = 22.98 m / s
we look for the time
[tex]v_{y}^2[/tex] = v_{oy}^2 - 2 g y
v_{y}^2 = 19.28 2 - 2 9.8 16 = 371.71 - 313.6 = 58.118
v_{y} = 7.623 m / s
we calculate the time
v_{y} = v_{oy} - gt
t = (v_{oy} - v_{y}) / g
t = (19.28 -7.623) / 9.8
t = 1,189 s
since the time is the same for both movements let's use this time to find the horizontal distance
x = v₀ₓ t
x = 22.98 1,189
x = 27.3 m
Systemic circulation requires help from which of the following bones, lungs, arteries and veins, or muscles
Answer:
Artery and viens
Explanation:
The radius of a small ball is around 3.79747 cm. The radius of a basketball is about 3.16 times larger. What is the ratio of the surface areas of the small ball and a basketball? 2. What is the ratio of their volumes?
Explanation:
The ratio of the areas is the square of the ratio of the radii.
A/A = 3.16² = 9.99
The ratio of the volumes is the cube of the ratio of the radii.
V/V = 3.16³ = 31.6
Which of the following is the correct equation to calculate electrical energy? P = I/V V = P × I P = I × V E = P × t
You haven't told us what any of those letters represents.
I'm going to assume that ...
-- ' P ' = power
-- ' I ' = circuit current
-- ' V ' = circuit voltage
-- ' E ' = energy
-- ' t ' = time.
Now I'm ready to answer the question that I just invented.
P = I / V
V = P x I
Both of these are false statements, and can't be used to calculate anything.
P = I x V is the correct equation to calculate electrical power.
E = P x t is the correct equation to calculate electrical energy.
A 20 kg truck drives in a circle of radius 4 m at 10m/s. What causes
the circular motion?
A. Normal Force
B. Friction
C. Tension
D. Gravity
Answer:
Normal force
Explanation:
The force is centipetral forceCalculating :-
Mass=m=20kgRadius=r=4mVelocity=10m/s=vWe know
[tex]\boxed{\sf F_c=\dfrac{mv^2}{r}}[/tex]
[tex]\\ \sf\longmapsto F_c=\dfrac{20(10)^2}{4}[/tex]
[tex]\\ \sf\longmapsto F_c=\dfrac{20(100)}{4}[/tex]
[tex]\\ \sf\longmapsto F_c=\dfrac{2000}{4}[/tex]
[tex]\\ \sf\longmapsto F_c=500N[/tex]
A car is moving with the velocity of 90km/h. If the car come to rest after 10 seconds. Calculate the final velocity and distance covered by the car within that time.
plz wirte the full formula
Answer:
you can learn from here
https://www.toppr.com/ask/en-bd/question/a-car-is-moving-with-a-velocity-of-10-ms-the-driver-sees-a-wall/
what is equal to 1 hector area
Answer:
Don't Forget To Follow, Brainliest, And Give Me Heart :)
A missile is moving 1350 m/s at a 25° angle it needs to hit a target 23,500 m away in a 55° direction in 10.2 seconds what is the magnitude of its final velocity
Answer:
3504 m/s
Explanation:
Let x be the horizontal component of distance
y - vertical component of distance
t-time
ax- horizontal component of acceleration
ay-Vertical component of acceleration
Vx-horizontal component of velocity
Vy-Vertical component of velocity
horizontally: x = V_x ×t + ½×a_x×t²
plugging the values we get
23500× cos 55º = 1350×cos25.0º × 10.20 + ½×a_x× (10.20)²
⇒ax = 19.2 m/s²
Moreover,
V'x = V_x + a_x×t = 1350×cos25.0º + 19.2×10.20= 1419 m/s
similarly in vertical direction:
y = V_y×t + ½×a_y×t²
23500×sin55º = 1350×sin25.0º×10.20s + ½×a_y×(10.20)²
⇒a_y = 258 m/s²
Also,
V'y = V_y + a_y×t = 1350×sin25.0º + 258×10.20 = 3204 m/s
Therefore
V = √(V'x² + V'y²) = 3504 m/s
therefore, magnitude of final velocity of missile=3504 m/s
THANKS
3
5.0
(7 votes)
Not the answer you're looking for?
FIND MORE
Previous
Next
Manetho
Manetho
Rank: Ambitious
29830/500
0/5
Your influence
1
14h : 28m
Answering Streak
Answer a question in time to keep your streak going and the unlocks coming.
Fun fact
An apple, potato, and onion all taste the same if you eat them with your nose plugged
1
2
2
Get +4
bonus
2
3
3
Get +6
bonus
3
Last 7 days
Overall
Your stats from the last 7 days compared with the previous 7 days
Popularity
881
People learning from your answers.
+4%
Brainliest
Use the diagram to answer each question.
Why might a researcher further classify the data in the chimpanzee dier table to include separate information of males and females ?
Answer:
In the data table, we can see the frequency distribution in the diet of a given type of chimpanzee.
Why a researcher further classify the data separating information of males and females?
Well, the objective of the researcher is to find information about these chimpanzees, so if he notices that the diet varies (even slightly) between males and females, separating the information between males and females would be useful to know how the diet varies, and why this happens.
This is the primary motive of why a researcher would want to separate the information of males and females.
Six members of a synchronized swim team wear earplugs to protect themselves against water pressure at depths, but they can still hear the music and perform the combinations in the water perfectly. One day, they were asked to leave the pool so the dive team could practice a few dives, and they tried to practice on a mat, but seemed to have a lot more difficulty. Why might this be
Answer:
The sound travels differently in different medium according the density of the medium.
Explanation:
The sound travels faster in dense medium and can be heard by the vibration of the bone present in the ear. The ear plugs reduce the sound intensity in both medium water and on land (air).
In air the sound is not heard properly due to the earplugs that stops the as the vibration are not able to produce as sound is not able to reach to middle ear, but Navy researchers have discovered that sound under water is heard by the bone present behind the ear, vibrations mastoid.
Which two possible explanations does the video give for why white light changes into colored light? Color is an impurity added to white light by the prism. Color is present in the materials on which white light shines. White light contains seven colors, which are separated by the prism. White light reacts with chemicals in the air to produce seven colors.
Answer:
White light contains seven colors, which are separated by the prism.
White light reacts with chemicals in the air to produce seven colors.
Explanation:
It was first observed by Sir Issac Newton, that when white light is passed through a prism, an elongated, coloured patch of light is obtained on a screen placed behind the prism. The seven colours obtained constitute the spectrum of white light.
In nature, white light is separated into its constituent wavelengths when white light interacts with substances in the atmosphere.
Answer:
The correct answer is “color is an impurity added to white light by the prism.”
and
“White light contains seven colors, which are separated by the prism
Explanation:
Solve for angles A-D
'When we see something that exists in real life, there are many different ways to display imagery and importance using art. What the artist _____________ depends on what he/she wants to communicate.'
Answer:
Emphasizes
Explanation:
The expression of an art is intelligible to those that understand it, as such to make an impression an artist has to emphasize the point they want to communicate
An art is an expression of the personal experiences of the artist or a reaction to events or to reveal the realities as seen by the artist such as global warming and the environment, so as to get the attention of people with the goal to change them, such that a good art changes the most people, hence the need for emphasis.
Answer:
A - emphasizes
How many centimeters (cm) are in 1 mile? _
Knowns:
1.61 kilometer (km) = 1 mile
1000 meter (m) = 1 kilometer (km)
100 centimeter (cm) - 1 m
Answer:
161,000 cm
Explanation:
1 mi × (1.61 km/mi) × (1000 m/km) × (100 cm/m) = 161,000 cm
A 50.5-turn circular coil of radius 4.75 cm can be oriented in any direction in a uniform magnetic field having a magnitude of 0.455 T. If the coil carries a current of 22.5 mA, find the magnitude of the maximum possible torque exerted on the coil.
Answer:
The maximum torque, τ = 3.67 × 10⁻³ Nm
Explanation:
The torque τ = NiABsinθ where N = number of turns of circular coil = 50.5, i = current in circular coil = 22.5 mA = 0.0225 A, A = area of circular coil = πr² where r = radius of circular coil = 4.75 cm = 0.0475 m, B = magnetic field strength = 0.455 T and θ = 90° for maximum torque.
So, τ = NiABsinθ
τ = Niπr²Bsinθ
τ = 50.5 × 0.0225 A × π × (0.0475 m)² × 0.455 T × sin90°
τ = 0.003665 Nm
τ = 3.665 × 10⁻³ Nm
τ ≅ 3.67 × 10⁻³ Nm
So the maximum torque, τ = 3.67 × 10⁻³ Nm
DOES STONE DISPLACE MORE WATER THAN ITS WEIGHT
The hydro power plant transforms one form of energy into another. However, the total amount
of energy of the water stays the same until it enters the turbine.
Explain how this statement is supported by the three column charts above.
*attached is the column charts
The hydro power plant consists of a (artificial) dam that builds gravitational potential energy, P.E. from natural flowing water sources, by locating the dam along the water path. The stored potential energy, P. is converted into kinetic energy, K.E. as the water falls from the dam, down to the turbines, located at a much lower level according to the following principle of conservation of energy equation;
Total Mechanical Energy, M.E. = The potential energy of the water, P.E. + The kinetic energy of the water, K.E. = Constant
M.E. = P.E. + K.E. = Constant
Where;
P.E. = m·g·h
K.E. = (1/2)·m·v²
m = Mass
g = The acceleration due to gravity
h = The height of the dam
v = The velocity
The charts can be explained as follows;
Given that the potential energy P.E. = m·g·h, we have that the potential energy is directly proportional to the height of the dam, and therefore, at mid height, the potential energy would be half the maximum value, and we have;
At mid height, P.E. = (1/2)·[tex]\mathbf{P.E._{max}}[/tex]
At the top of the dam, the (vertical) velocity of the water = 0, therefore, the kinetic energy = 0
Therefore, at the top of the dam, we get;
M.E. = [tex]P.E._{max}[/tex] + 0 =
M.E. = [tex]\mathbf{P.E._{max}}[/tex]
Similarly, at the bottom of the dam, the height, h = 0, therefore, being proportional to the height, P.E. = 0, and the velocity is maximum, and at the bottom, we have;
M.E. = 0 + [tex]K.E._{max}[/tex]
The first chart, water is halfway down the dam
At the halfway down therefore, we have;
P.E. = (1/2)·[tex]\mathbf{P.E._{max}}[/tex]
M.E. = [tex]P.E._{max}[/tex] = (1/2)·
∴ K.E. = [tex]P.E._{max}[/tex] - (1/2)·
Therefore the first chart, water is halfway down the dam;
Halfway, K.E. = (1/2)·[tex]\mathbf{P.E._{max}}[/tex] = P.E.
∴ K.E. = P.E. as shown on the chart
The second chart, water has reached the turbine
Water reaches the turbine at the bottom, and as explained above, we get;
M.E. = 0 + [tex]K.E._{max}[/tex]
∴ M.E.≈ [tex]K.E._{max}[/tex]
Therefore, when water has reached the turbine at the bottom of the dam, the kinetic energy is approximately proportional to the total mechanical energy as shown in the chart
The third chart, water is at the top of the dam
Here as shown above, we have;
The total mechanical energy, M.E. ≈ [tex]\mathbf{P.E._{max}}[/tex] as shown on the chart
Learn more about potential and kinetic energy here;
https://brainly.com/question/18683052
Velocity is a description of an object’s _____.
Answer:
speed
Explanation:
define fundamental unit.
Answer:
Those units which are independent of each other are called fundamental unite. there are seven fundamental unite of seven fundamental quantities
Bus starts from rest if the acceleration of the bus is 0.5 MS squared what will be the velocity at the end of two minutes and what distance will it cover during that time
Explanation:
Given that,
Initial speed of the bus, u = 0
Acceleration of the bus, a = 0.5 m/s²
Let v is the velocity at the end of 2 minutes. The change in velocity divided by time equals acceleration.
So,
[tex]a=\dfrac{v-u}{t}\\\\v=u+at\\\\v=0+0.5\times 120\\\\v=60\ m/s[/tex]
Let d is the distance cover during that time. So,
[tex]v^2-u^2=2ad\\\\d=\dfrac{v^2-u^2}{2a}\\\\d=\dfrac{(60)^2}{2\times 0.5}\\\\d=3600\ m[/tex]
So, the final speed is 60 m/s and the distance covered during that time is 3600 m.
Which of the following would cause the force of kinetic friction to increase?
A. A decrease in the normal force
B. An increase in us
C. A decrease in lk
D. An increase in the normal force
Answer:
Increase in μk
Explanation:
different ans set
A particle moves in a plane according to X=Rsinwt + wRt Y=Rcoswt+R where w and R constant this curved called cycloid path traced out by a point on rim of wheel that slipping with x-axis sketch the path calculate intantaneous velocity and acceleration when particle is its axis maximun and minimun value of Y
Answer:
maximum point y= 2R
vₓ = wR , v_{y} = 0, aₓ = 0, a{y} = - Rw²
minimum point y=R
vₓ = wR , v_{y} = - R w, aₓ = - R w², a_{y} = 0
Explanation:
The definition of velocity is
v = dr / dt
vₓ = dx / dt
[tex]v_{y}[/tex] = dy / dt
vₓ = Rw cos wt + wR
v_{y} = -Rw sin wt
acceleration is defined by
a = dv / dt
aₓ = -Rw² sin wt
a_{y} = - R w² cos wt
these are the general expressions for velocity and acceleration, to find the explicit values for the maximum and minimum y points, let's find these points and substitute
maximum point
y = R cos wt + R
the heat is maximum when the cosine is worth 1
y_max = 2R
at this point the speed is
vₓ = wR
v_{y} = 0
the acceleration is
aₓ = 0
a_{y} = - Rw²
minimum point
this occurs when the cosine is zero
y = R
speed is
vₓ = wR
v_{y} = - R w
acceleration is
aₓ = - R w²
a_{y} = 0
which of the following best describes the kinetic theory model?
a. all particles in matter eventually stop moving
b. energy changes have no effect on the state of matter
c. when particles in matter gain or lose energy , they change state
d. no matter how much energy is present particles never move
Answer:
Answer c: "when particles in matter gain or lose energy , they change state"
Explanation:
As energy is provided to the molecules of the substance in question, they acquire more speed or vibration, increasing their separation in the substance, which can become then a liquid , or a gas. The reverse path also happens as the particles give away energy.
Answer:
c. when particles in matter gain or lose energy , they change state
we know that for example, if you add heat (energy) to ice it would melt (change state) or if you freeze water (change state) it would become ice.
How much does the speed of a car increase if it accelerates
uniformly at 2.5 meters per second squared for 5 seconds?
Answer:
12.5 m/s
Explanation:
a = Δv / Δt
2.5 m/s² = Δv / 5 s
Δv = 12.5 m/s
please do ittt I really need it
Answer:
ok bro
Explanation:
jdkdkfnfnfkfn fkfkkfodow icjdbe
Which statement about the dark nebulae is true? Group of answer choices They can be penetrated only with longer wavelengths such as radio and infrared. They block the vast majority of radio waves from our Galaxy. Hydrogen and helium are the chief absorbing and scattering agents. They can be penetrated only with shorter waves, such as UV and x-ray. Only one is known to exist.
Answer:
They can be penetrated only with longer wavelengths such as radio and infrared.
Explanation:
A dark nebula can be defined as an interstellar cloud that is so dense as a result of high concentration of gas and dust and as such it obscures the visible wavelengths of light from stars behind it, thus appearing completely opaque (dark patch) in front of a bright emission nebula or in regions having plenty stars.
Hence, dark nebulae can be penetrated only with longer wavelengths such as radio and infrared light because they cannot be absorbed by the dust layers or particles coated with frozen carbon monoxide and nitrogen residing in the dark nebulae.
An atom of unknown element Z has mass number of 39 and an atomic number of 18. How many protons and how many neutrons are in this atom? Show your work
Answer:
proton:18
neutron:39-18=21
what happens when a force is applied in the direction of motion of a body
Answer:
If the force applied on the object is in the direction of its motion, the speed of the object increases. If the force is applied in the direction opposite to the direction of motion, then it results in a decrease in the speed of the object.
The tin can with water in its bottom is heated to boil water and the steam is allowed to escape for some time. The open mouth is sealed with an air-tight cap and cooled under tap water. The tin can get crushed, why?
Explanation:
Water does expand with heat (and contract with cooling), but the amount of expansion is pretty small. So when you boil a can filled with water and seal it, the water will contract slightly as it cools. The can may kink slightly, but that will be it. Actually, most likely the only things you will be able to see is then top and bottom will be sucked in and go concave. Just like a commercial can of beans.
Now if you have a can with a little water and a big air space, things are completely different.
As the water boils, water vapour is given off. Steam. Let it boils for a minute just to make sure (nearly) all the air is expelled and the can is filled with steam.
Now when you put the lid on and cool the can, that steam condenses back to water, and goes from filling the can to a few drops of water. The can is now filled (if that is the right word) with a near vacuum, The air pressure, 15 lbs/square inch, will be pressing on every surface of the can, with nothing inside the can to resist it.
The can will crumple before your eyes.
A force of 20N changes the position of a body. If mass of the body is 2kg, find the acceleration produced in the body.2. A ball of mass 500g is thrown upwards with a velocity of 15m/s. Calculate its momentum at the highest point.
Explanation:
Hello there!!!
You just need to use simple formula for force and momentum,
F= m.a
and momentum (p)= m.v
where m= mass
v= velocity.
a= acceleration .
And the solutions are in pictures.
Hope it helps..
Classical mechanics (Forces) focuses on studying …
Electricity
Motion of Objects
Living Systems
Atomic Structure
Answer:
Motion of Objects
Explanation:
Motion of Objects
Both Static and Dynamic Forces.