A toroidal solenoid has 590 turns, cross-sectional area 6.20 cm^2 , and mean radius 5.00 cm .Part A. Calcualte the coil's self-inductance.Part B. If the current decreases uniformly from 5.00 A to 2.00 A in 3.00 ms, calculate the self-induced emf in the coil.Part C. The current is directed from terminal a of the coil to terminal b. Is the direction of the induced emf froma to b or from b to a?

Explanation:

Consider a loop of wire, which has an area of [tex]A=14 \mathrm{cm}^{2}[/tex] and [tex]N=250[/tex] turns, it is initially placed perpendicularly in the earth magnetic field. Then it is rotated from this position to a position where its plane is parallel to the field as shown in the following figure in [tex]\Delta t=0.030[/tex] s. Given that the earth's magnetic field at the position of the loop is [tex]B=5.0 \times 10^{-5} \mathrm{T}[/tex], the flux through the loop before it is rotated is,

[tex]\Phi_{B, i} &=B A \cos \left(\phi_{i}\right)=B A \cos \left(0^{\circ}\right[/tex]

[tex]=\left(5.0 \times 10^{-5} \mathrm{T}\right)\left(14 \times 10^{-4} \mathrm{m}^{2}\right)(1)[/tex]

[tex]=7.0 \times 10^{-8} \mathrm{Wb}[/tex]

[tex]\quad\left[\Phi_{B, i}=7.0 \times 10^{-8} \mathrm{Wb}\right[/tex]

after it is rotated, the angle between the area and the magnetic field is [tex]\phi=90^{\circ}[/tex] thus,

[tex]\Phi_{B, f}=B A \cos \left(\phi_{f}\right)=B A \cos \left(90^{\circ}\right)=0[/tex]

[tex]\qquad \Phi_{B, f}=0[/tex]

(b) The average magnitude of the emf induced in the coil equals the change in the flux divided by the time of this change, and multiplied by the number of turns, that is,

[tex]{\left|\mathcal{E}_{\mathrm{av}}\right|=N\left|\frac{\Phi_{B, f}-\Phi_{B, i}}{\Delta t}\right|}{=} & \frac{1.40 \times 10^{-5} \mathrm{Wb}}{0.030 \mathrm{s}}[/tex]

[tex]& 3.6 \times 10^{-4} \mathrm{V}=0.36 \mathrm{mV}[/tex]

[tex]\mathbb{E}=0.36 \mathrm{mV}[/tex]

(a) The initial and final flux through the coil is 1.75 × 10⁻⁵ Wb and 0 Wb

(b) The induced EMF in the coil is 0.583 mV

Given that the coil has N = 250 turns

and an area of A = 14cm² = 1.4×10⁻³m².

It is rotated for a time period of Δt = 0.030s such that it is parallel with the earth's magnetic field that is B = 5×10⁻⁵T

(a) The flux passing through the coil is given by:

Ф = NBAcosθ

where θ is the angle between area vector and the magnetic field

The area vector is perpendicular to the plane of the coil.

So, initially, θ = 0°, as area vector and earth's magnetic field both are perpendicular to the plane of the coil

So the initial flux is:

Φ = NABcos0° = NAB

Ф = 250×1.4×10⁻³×5×10⁻⁵ Wb

Ф = 1.75 × 10⁻⁵ Wb

Finally, θ = 90°, and since cos90°, the final flux through the coil is 0

(b) The EMF induced is given by:

E = -ΔФ/Δt

E = -(0 - 1.75 × 10⁻⁵)/0.030

E = 0.583 × 10⁻³ V

E = 0.583 mV

Learn more about magnetic flux:

https://brainly.com/question/15359941?referrer=searchResults

Answer:

(a) 10 s

(b) 30 m/s

(c) 150 m

Explanation:

The motorist's position at time t is:

x = 15t

The officer's position at time t is:

x = ½ (3) t² = 1.5 t²

(a) When they have the same position, the time is:

15t = 1.5 t²

t = 0 or 10 s

(b) The officer's speed is:

v = 3t

v = 30 m/s

(c) The position is:

x = 15t = 150 m

Answer:

69.58 m tall

Explanation:

Pls see attached file

Answer:

E. The gas absorbs 50 of energy as heat and does 50」ot work

Explanation:

This is following the law of thermodynamics that energy is neither created nor destroyed

0.6764*10^-10m

Explanation:

Using E= hc/wavelength

(4.14x10^-15)x(3.0x10^8)/(65x10^-12)=0.1911x10^5 eV=19.1 keV

So subtract the calculated energy from the given energy of scattered photons

9.11-0.75=18.36 keV

To find wavelength

Wavelength= hc/ E

[(4.14x 10^-15)x (3.0x10^8)]/(18.36*10^3) =0.6764^-10 m

Answer:

The box will cover a distance of 0.9199m before coming to rest

Explanation:

We are given;

Angle of tilt; θ = 12°

Speed of sliding down; u = 1.5 m/s

Coefficient of kinetic friction; μ = 0.34

We are told that the box is sliding down an incline tilted at a 12° angle above horizontal.

Thus,

The components of the weight of the block would be;

Fx = mg sinθ = mg sin 12

Fy = mg cosθ = mg cos 12

For, the normal force on the block, it will be counter balanced by the Y component of weight of block and so we have;

Normal force; Fn = mg cos 12

Now formula for the frictional force would be given by;

Ff = μmg cos 12

So, Ff = 0.34mg cos 12

So, the net force along the inclined plane is;

Fnet = Fx - Ff

Fnet = mg sin 12 - 0.34mg cos 12

Where Fnet = mass x acceleration.

Thus;

ma = mg sin 12 - 0.34mg cos 12

m will cancel out to give;

a = g sin 12 - 0.34g cos 12

a = 9.81(0.2079) - 0.34(9.81 × 0.9781)

a = -1.223 m/s²

According to Newton's equation of motion, we have;

(v² - u²) = 2as

s = (v² - u²)/2a

Final velocity is zero. Thus;

s = (0² - 1.5²)/(2 × -1.223)

s = -2.25/-2.446

s = 0.9199 m

Thus, the box will cover 0.9199m before coming to rest

Answer:

Option 2 (observing, measuring, testing, and explaining their ideas) is the correct choice.

Explanation:

The other three choices have no relation to a particular task. So the option given here is just the right one.

Explanation:

F = ma

85 N = m (15 m/s²)

m ≈ 5.7 kg

Answer:

grandson annual Iranian Jamal Jamal Hannah travel

Answer:

a force that moves an object

Explanation:

the formula for work is force * distance

This question involves the concepts of work, force, and displacement.

The statement that best identifies the requirements for work to be performed is "a force that moves an object".

Work is defined as the product of force applied on an object and the distance moved by the object. Mathematically,

Work = (Force)(Displacement)

Hence, both the applied force and the displacement of the object as a result of the application of the force is necessary for the work to be done. If any one of these values becomes zero, the work automatically becomes zero, which means no work is performed.

Learn more about work here:

https://brainly.com/question/4095205

Answer:

a) 0.56°C

b) 273.56 K

Explanation:

If we want to convert from Fahrenheit scale to Celcius scale we use the formula;

T(°C) = (T(°F) - 32) × 5/9

Where T(°F) = 33°F

Hence;

T(°C) = (33°F - 32) × 5/9

T°C = 0.56°C

b)

T(K) = T°C + 273

T(K) = 0.56 + 273

T(K) = 273.56 K

Someone would choose a for-profit fitness center over a nonprofit center because for-profits usually have nicer equipment than nonprofit centers.

A for-profit institution is an institution that provides a service to society to obtain an economic profit from this service. On the other hand, non-profit institutions are those that provide a service to society and do not intend to make a profit, they are generally institutions that are part of the government, foundations, or non-governmental organizations.

Non-profit institutions can function thanks to donations, volunteers, public resources, and do not charge for providing the service they provide, while for-profit institutions charge for their service and a percentage of that charge is profit for the owner of the institution and another is reinvested in equipment, human resources or others to improve the service.

According to this, for-profits are likely to have better equipment, while non-profit are characterized by supporting missions and offering services to low-income communities.

Learn more in: https://brainly.com/question/13538740

Answer:

check photo

Explanation:

Answer:

The  thickness is   [tex]t = 1.415 *10^{-7 } \ m[/tex]

Explanation:

From the question we are told that

    The wavelength is  [tex]\lambda = 566 \ nm = 566 *10^{-9} \ m[/tex]

     The  index of refraction of glass is  [tex]n_g = 1.71[/tex]

     The index of refraction of the coating is  [tex]n= 1.46[/tex]

Generally the condition for destructive interference is  

         [tex]2 t = (m + \frac{1}{2} ) * \frac{\lambda }{n }[/tex]

Here m is the order of the interference pattern and given from the question that we are considering minimizing  reflection  m = 0

t = thickness of the coating

substituting values

         [tex]2 t = (0 + \frac{1}{2} ) * \frac{ 566 *10^{-9}}{ 1.46 }[/tex]

    =>    [tex]t = 1.415 *10^{-7 } \ m[/tex]

Answer:

static friction acting opposite to the direction of travel

Explanation:

Because the Frictional force of the front wheels act to oppose the spinning, so, For the front wheels to roll without slipping, the friction must be static friction pointing in the direction of travel of the car.

Explanation:

Answer:

The torque is 11.27 N m

Explanation:

Recall that torque is the vector product of the force times the distance to the pivoting point. So in our case, the distance to the pivoting point is the radius of the cylinder (0.05 m), and the force is given by the weight of the bucket full of water (W = 9.8 * 23 N = 225.4 N)

Then the torque is: 0.05 * 225.4 N m = 11.27 N m

Answer:

Option A

Electrons are emitted if low intensity, high-frequency light hits a metal surface.

Explanation:

From the experiments conducted to study the photoelectric effect, conclusions were made that the key factor that contributes to the emission of electrons from the surface of the metal is the frequency of the beam of light. This frequency has to be beyond a minimum threshold, if not, there will be no emission of electrons from the metal surface no matter the intensity of the beam of light or the length of time it is incident upon the metal surface.

This makes option A correct because it highlights the contributions made by the threshold frequency to the photoelectric effect.

Answer:

0.002699 m or 2.699 mm

Explanation:

y = Fringe distance

d= Distance between slits = 0.310mm

L = Screen distance = 4.40m

λ= Wavelength

Given from question

λ₁= 660 nm = 6.6 x 10^-9 m

λ₂= 470 nm = 4.7 x 10^-9 m

d = 0.340 mm = 3.4 x 10^-3 m

L = 4.40 m

In the case of constructive interference, we use below formula

y/L = mλ/d

For first order wavelength

(y₁/4.40) =(1×660x10⁻⁹)/(0.310*10⁻³)

y₁= (0.310*10⁻³)×(4.40)/(0.310*10⁻³)

y₁=0.00937m

(y2/4.40) =(1×470x10⁻⁹)/(0.310*10⁻³)

y2= =(1×470x10⁻⁹)×(4.40)/(0.310*10⁻³)

y2=0.00667m

distance between the fringes is given by (y₁ -y2)

=0.00937-0.00667=0.002699m

Therefore, distance on the screen between the first-order bright fringes for the two wavelengths is 0.002699 m or 2.699 mm

Answer:

0.35 m³/s

Explanation:

When the pipe's depth is 0.4 m, the area of the circular segment is:

A = ½ R² (θ − sin θ)

The depth of the water is:

h = R (1 − cos(θ/2))

Solving for θ:

0.4 = 0.5 (1 − cos(θ/2))

0.8 = 1 − cos(θ/2)

cos(θ/2) = 0.2

θ/2 = acos(0.2)

θ = 2 acos(0.2)

θ ≈ 2.74 rad

The area is therefore:

A = ½ (0.5 m)² (2.74 − sin 2.74)

A = 0.338 m²

The cross-sectional area when the pipe is full is:

A = π (0.5 m)²

A = 0.785 m²

The flow velocity is constant:

v = v

Q / A = Q / A

(0.15 m³/s) / (0.338 m²) = Q / (0.785 m²)

Q = 0.35 m³/s

Answer:

a 25 and b 25

2. 26

60n

Answer:

To maintain the same fringe spacing on the screen, the screen-to-slit distance D must be changed to a value 2D that is twotimes D

Answer:

metal conducts heat better than wood.

Explanation:

Metals are generally good conductors of heat, and they usually conduct heat at a relatively rapid rate. Inside the room with a uniform temperature, a metal when touched will rapidly conduct the heat from your hand, leaving your hand with a cooler feeling. Wood on the other hand is a poor heat conductor, so the heat is not conducted from your hand fast enough to cool it up to the point that your hand feels cool.

Answer:

Explanation:

magnetic field due to an infinite current carrying conductor

B = k x 2I / r where k = 10⁻⁷  , I is current in conductor and r is distance from wire

putting the given data

B = 10⁻⁷ x 2 x 100 / 8

= 25 x 10⁻⁷ T .

B )

earth's magnetic field = .5 gauss

= .5 x 10⁻⁴ T

= 5 x 10⁻⁵ T

percent required = (25 x 10⁻⁷ / 5 x 10⁻⁵) x 100

= 5 %

C )

ii.  No. Since this field is much lesser than the earth's magnetic field, it would be expected to have less effect than the earth's field.

Answer: Astro 1 will have a 10x larger field of view than the Hubble.

Explanation: The hubble will also be extremely light weight that way it can go further into space and the mission will be able to last a longer amount of time.

Answer:

El sistema de posicionamiento global (conocido mundialmente como GPS) podría utilizarse para proponer recorridos alternativos para llegar a un lugar específico, como un parque, a través de la creación de un recorrido guiado por una aplicación móvil con diferentes rutas de acceso al lugar.

Así, por ejemplo, se crearían diferentes rutas de acceso desde un punto A hasta un punto B, teniendo en cuenta factores como: rapidez, congestión vehicular, pago o no de peajes, posibilidad de acceso a pie y determinados factores extra que influyan en la forma de llegar al lugar. Todo ello plasmado en un mapa interactivo en el cual se señalen las rutas disponibles mediante el marcado del mapa en cuestión.

Explanation:

Change in Velocity = final velocity - initial velocity

Change in velocity = 30km/h - (- 45km/h )

= 75 km/h due west

Answer:

The pressure increase inside the automobile engine block is 1782.18 ATM

Explanation:

Given;

the change in volume of water, ΔV = 9%

the bulk modulus of ice, K = 2 x 10⁹ N/m²

Bulk modulus is given by;

[tex]K = -V\frac{dP}{dV}[/tex]

for pressure increase in the automobile engine block, when the water in there froze;

[tex]dP = K(\frac{dV}{V} )\\\\dP = K(\frac{0.09V}{V} )\\\\dP = 0.09K\\\\dP = 0.09 (2*10^9)\\\\dP = 1.8 *10^{8} \ N/m^2\\\\dP = 1782.18 \ ATM[/tex]

Therefore,  the pressure increase inside the automobile engine block is 1782.18 ATM

The pressure increase inside your automobile engine block will be 1782.18 atm. The force involved vertical to the surface of an object per unit area is pressure.

The force applied perpendicular to the surface of an item per unit area across which that force is spread is known as pressure.

It is denoted by P. The pressure relative to the ambient pressure is known as gauge pressure.

The given data in the problem is;

ΔV is the  change in volume of water = 9%

K is the bulk modulus of ice = 2 x 10⁹ N/m²

dP is the change in the presure=?

The bulk modulus is found as;

[tex]\rm K=-V \frac{dp}{dv} \\\\[/tex]

The change in the presure is obtained as;

[tex]\rm dP = K\frac{dV}{V} \\\\ \rm dP = K\frac{0.09V}{V} \\\\ \rm dP = 0.09 K \\\\ \rm dP = 0.09 \times 2 \times 10^9 \\\\ \rm dP = 1.8 \times 10^8 \\\\ \rm dP =1782.18 \ atm[/tex]

Hence the pressure increase inside your automobile engine block will be 1782.18 atm.

To learn more about the pressure refer to the link;

https://brainly.com/question/356585

Answer:

The radius is  [tex]r = 3.1905 \ m[/tex]

Explanation:

From the question we are told that

        The  distance  beneath the liquid  is  [tex]d = 2.70 \ m[/tex]

        The refractive index of the liquid is  [tex]n_i = 1.31[/tex]

Now the critical value is mathematically represented as

         [tex]\theta = sin ^{-1} [\frac{1}{n_i} ][/tex]

substituting values

         [tex]\theta = sin ^{-1} [\frac{1}{131} ][/tex]

         [tex]\theta = 49.76^o[/tex]

Using SOHCAHTOA rule we have that

         [tex]tan \theta = \frac{ r}{d}[/tex]

=>     [tex]r = d * tan \theta[/tex]

substituting values  

        [tex]r = 2.7 * tan (49.76)[/tex]

        [tex]r = 3.1905 \ m[/tex]

Answer:

4.635 *10^12 Neutrinos

Explanation:

Here in this question, we are to determine the number of neutrinos in billions produced, given the power generated by the proton-proton cycle.

We proceed as follows;

In proton-proton cycle generates 26.7 MeV of energy and in this cycle two neutrinos are produced.

From the question, we are given that

Power P = 9.9 watts = 9.9 J/s

Watts is same as J/s

The number of proton-proton cycles required to generate E energy is N = E / E '

Where E ' = Energy generated in proton-proton cycle which is given as 26.7 Mev in the question

Converting Mev to J, we have

= 26.7 x1.6 x10 -13 J

To get the number N which is the number of proton-proton cycle required, we have;

N = 9.9 /(26.7 x1.6 x10^-13) = 2.32 * 10^12

Since we have two proton cycles( proton-proton), it automatically means 2 neutrinos will be produced.

Therefore number of neutrions produced = 2 x Number of proton-proton cycles = 2 * 2.32 * 10^12 = 4.635 * 10^12 neutrinos