Answer:
TATGGCGTT
Explanation:
Complimentary base pairs:
A-T
C-G
Use the other letter for complimentary strands
Come up with a definition for density
Density measures how tightly packed particles are.
If particles are tightly packed together, they will be more dense.
If they are loosely together, they will be less dense.
However, a common mistake is thinking that if something
is more dense it means that it's heavier.
However, that's not the case.
It has to do with how particles are packed in an object.
Write the IUPAC and common names, if any, of the carboxylate salts produced in the reaction of each of the following carboxylic acids with NaOH: 2-methylhexanoic acid
Part A
2-bromopropanoic acid Spell out the full name of the compound. If there is a common name separate your answers by a comma.
Part B
2-methylhexanoic acid Spell out the full name of the compound. If there is a common name separate your answers by a comma.
Answer:
Following are the explanation to this question:
Explanation:
The salts of carboxylate are named by the writing, which is also named as the creation of the first, which is followed by the name of the carboxylic acid were '-ic' of the acid end and replaced by the 'ate'.
Following are the description of the given reaction:
In reaction A:
2-Bromopropanoic acid= [tex]C_3H_5BrO_2[/tex]
[tex]C_3H_5BrO_2+NaOH[/tex]⇄ [tex]C_3H_4BrNaO_2 +H_2O[/tex]
The IUPAC name is Sodium-2-Bromopropanate
In reaction B:
2-Methylhexanoic acid= [tex]C_7H_{14}O_2[/tex]
[tex]C_7H_{14}O_2+NaOH[/tex]⇄ [tex]C_7H_{13}NaO_{2}+H_2O[/tex]
The IUPAC name is Sodium-2-Methyl hexanoate
The IUPAC name of compound is Sodium-2-Bromopropanate in reaction 1 and in reaction 2 it is 2-Methylhexanoic acid.
The salts of carboxylate are named by the writing, which is also named as the creation of the first, which is followed by the name of the compound carboxylic acid were '-ic' of the acid end and replaced by the 'ate'.
Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.
Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.
Thus, the IUPAC name of compound is Sodium-2-Bromopropanate in reaction 1 and in reaction 2 it is 2-Methylhexanoic acid.
Learn more about compound,here:
https://brainly.com/question/14117795
#SPJ6
What best describes the goals of scientific investigation and technological development?
Both scientific investigation and technological design aim to solve problems by making more cost-effective and affordable products.
Both scientific investigation and technological design aim to conduct experiments to uncover new information and share the results.
Scientific investigation aims to design products that can make use of new information, whereas technological development aims to conduct experiments to improve affordability and availability.
Scientific investigation aims to design and implement an experiment to learn new information, whereas technological development aims to design a product to solve a problem.
Answer: D. Scientific investigation aims to design and implement an experiment to learn new information, whereas technological development aims to design a product to solve a problem.
Explanation:
A sample of radioactive silver contains two isotopes, 108Ag (denoted A) and 110Ag (denoted B). The second of these (B) has a half life of 24 seconds, whereas the first (A) has a half life of 2.3 minutes. If a sample contains equal numbers of each of these isotopes at the beginning of an experiment that runs for an hour, which of the following statements is correct?
A. At the end of the hour, isotope B has a greater decay constant λ than isotope A
B. At the end of the hour, isotope A has the same decay constant λ as isotope B
C. At the end of the hour, isotope A has a greater decay constant λ than isotope B
Answer:
A : At the end of the hour, isotope B has a greater decay constant λ than isotope A
Explanation:
Firstly, we need to understand that radioactive decay follows a first order rate law.
What this means is that we can calculate the radioactive decay constant using the following formula from the half-life
Mathematically;
[tex]t_{1/2}[/tex] = 0.693/λ
where λ represents the radioactive decay constant.
Rearranging the equation, we can have
λ = 0.693/[tex]t_{1/2}[/tex]
Now, to have a fair level playing ground, it is best that the half-life of both isotopes are in the same unit of time(seconds)
For A, the half-life = 2.3 minutes which is same as 2.3 × 60 = 138 seconds
For B, the half-life is 24 seconds
Thus, at the end of the hour, the decay constant for isotope A will be;
λ = 0.693/138 = 0.0050 [tex]s^{-1}[/tex]
For isotope B, the decay constant will be;
λ = 0.693/24 = 0.028875 [tex]s^{-1}[/tex]
We can see that the decay constant of isotope B is higher than that of A at the end of the experiment
People take antacids, such as milk of magnesia, to reduce the discomfort of acid stomach or heartburn. The recommended dose of milk of magnesia is 1 teaspoon, which contains 500 mg of Mg(OH)2. What volume of HCl solution with a pH of 1.25 can be neutralized by 1 dose of milk of magnesia
Answer:
[tex]V_{HCl}=0.208L=208mL[/tex]
Explanation:
Hello,
In this case, since the chemical reaction is:
[tex]2HCl+Mg(OH)_2\rightarrow MgCl_2+2H_2O[/tex]
We can see that hydrochloric acid and magnesium hydroxide are in a 2:1 mole ratio, which means that the neutralization point, we can write:
[tex]n_{HCl}=2*n_{Mg(OH)_2}[/tex]
In such a way, the moles of magnesium hydroxide (molar mass 58.3 g/mol) in 500 mg are:
[tex]n_{Mg(OH)_2}=500mg*\frac{1g}{1000mg}*\frac{1mol}{58.3g} =0.00858mol[/tex]
Next, since the pH of hydrochloric acid is 1.25, the concentration of H⁺ as well as the acid (strong acid) is:
[tex][H^+]=[HCl]=10^{-pH}=10^{-1.25}=0.0562M[/tex]
Then, since the concentration and the volume define the moles, we can write:
[tex][HCl]*V_{HCl}=2*n_{Mg(OH)_2}[/tex]
Therefore, the neutralized volume turns out:
[tex]V_{HCl}=\frac{2*0.00858mol}{0.0562\frac{mol}{L} }\\ \\V_{HCl}=0.208L=208mL[/tex]
Best regards.
Calculate the molarity of a solution containing 29g of glucose (C 6 H 12 O 6 ) dissolved in 24.0g of water. Assume the density of water is 1.00g/mL.
Answer:
whats the ph ofpoh=9.78
Explanation:
If it takes 72 mL of 9 M KOH to neutralize 415 mL of sulfuric
acid (H2SO4) solution, what is the concentration of the H2SO4
solution?
M
The concentration of H₂SO₄ is 0.78 M
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
H₂SO₄ + 2KOH —> K₂SO₄ + 2H₂O
From the balanced equation above,
Mole ratio of the acid, H₂SO₄ (nₐ) = 1
Mole ratio of the base, KOH (n₆) = 2
Finally, we shall determine the concentration of H₂SO₄. This can be obtained as follow:
Volume of base, KOH (V₆) = 72 mL
Concentration of base, KOH (C₆) = 9 M
Volume acid, H₂SO₄ (Vₐ) = 415 mL
Mole ratio of the acid, H₂SO₄ (nₐ) = 1
Mole ratio of the base, KOH (n₆) = 2
Concentration of acid, H₂SO₄ (Cₐ) =?CₐVₐ / C₆V₆ = nₐ/n₆
Cₐ × 415 / 9 × 72 = 1/2
Cₐ × 415 / 648 = 1/2
Cross multiply
Cₐ × 415 × 2 = 648
Cₐ × 830 = 648
Divide both side by 830
Cₐ = 648 / 830
Cₐ = 0.78 MTherefore, the concentration of H₂SO₄ is 0.78 M
Learn more: https://brainly.com/question/4225093
Draw the structure of beeswax.beeswax is made from the esterfication of a saturated 16-carbon fatty acid and a 30 carbon straight chain primary alcohol.
Answer:
Triacontyl palmitate
Explanation:
In this case, we have a reaction between an acid and an alcohol. When we put together these kind of compounds an ester is produced. This reaction is called "esterification".
In our case, the alcohol is a structure with 30 carbon in which the "OH" group is bonded on carbon 1. The name of this compound is "n-triacontanol". The acid is a structure in which we have 16 carbon in which the "COOH" group is placed on carbon 1. The name of this compound is "palmitic acid". The ester produced by the acid and the alcohol is "Triacontyl palmitate".
See figure 1.
I hope it helps!
What is the result in the double displacement reaction of hydrochloric acid and
lithium carbonate?
Answer:
Lithium chloride (LiCl), carbon dioxide, and water
Explanation:
Li₂CO₃ + HCl ⇒ LiCl + CO₂ + H₂O
When lithium carbonate reacts with hydrochloric acid, lithium chloride, water, and bubbles of carbon dioxide gas are given off. This is the result of a double displacement reaction followed by a decomposition reaction.
Hope that helps.
Why is the r.a.m. Value used?
Answer:
The r.a.m. value is used to determine how many isotopes an element has.
Explanation:
A reaction mechanism has the following proposed elementary steps:Step 1: A → B + CStep 2: A + B → DStep 3: 2 A + D → C + EIf Step 2 is the rate-limiting step, what would the proposed rate law for this mechanism be?
Answer: [tex]Rate=k[A][B][/tex]
Explanation:
Rate law says that rate of a reaction is directly proportional to the concentration of the reactants each raised to a stoichiometric coefficient determined experimentally called as order.
Order of the reaction is defined as the sum of the concentration of terms on which the rate of the reaction actually depends. It is the sum of the exponents of the molar concentration in the rate law expression.
For reactions which takes place in multiple steps are complex reactions and the order is given by the slowest step which is the rate limiting step.
For the given reaction, the rate limiting step is
[tex]A+B\rightarrow D[/tex]
Rate law will be , [tex]Rate=k[A][B][/tex]
From the graph of Density vs. Concentration, created in Graph 1, what was the relationship between the concentration of the sugar solution and the density of the sugar solution?
The graph is not given in the question, so, the required graph is attached below:
Answer:
According to the graph, the relationship between the density of the sugar solution and the concentration of the sugar solution is directly proportional to each other as they both are increasing exponentially.
The graph shows that, the density of sugar solution will increase with the increase in concentration of sugar in the solution.
At elevated temperatures, hydrogen iodide may decompose to form hydrogen gas and iodine gas, as follows:
2HI(g) ⇌ H2 (g) + I2 (g)
In a particular experiment, the concentrations at equilibrium were measured to be [HI] = 0.85 mol/L, [I2] = 0.60 mol/L, and [H2] = 0.27 mol/L. What is Kc for the above reaction?
Explanation:
Since Kc is
[tex]k = \frac{(products)}{(reactants)} [/tex]
You can insert the Hydrogen and Iodine gas on top, and Hydrogen Iodide in the denominator.
Note: you can only include gases and aqueous species in an equilibrium expression, and all the species in this reaction are gaseous so you're good.
Inserting their molarity at equilibrium into their places, and you can solve. Don't forget to make the coefficient of HI turn into a power.
Increasing which factor will cause the gravitational force between two objects to decrease?
weights of the objects
distance between the objects
acceleration of the objects
masses of the objects
Answer:
B
Explanation:
Increasing distance between the objects factor will cause the gravitational force between two objects to decrease. Therefore, option B is correct.
What causes gravitational force to decrease?The gravitational force grows in proportion to the size of the masses . The gravitational force weakens rapidly as the distance between masses grows. Unless at least one of the objects has a lot of mass, detecting gravitational force is extremely difficult.
Gravity is affected by object size and distance between objects. Mass is a unit of measurement for the amount of matter in an object.
The force of gravity is proportional to the masses of the two objects and inversely proportional to the square of the distance between them. This means that the force of gravity increases with mass but decreases as the distance between objects increases.
Thus, option B is correct.
To learn more about the gravitational force, follow the link;
https://brainly.com/question/12528243
#SPJ6
arrange the metals sodium,copper, and magnesium in the decreasing order of their reactivity
Answer:
sodium>magenisium>copper
A hypothetical atom has four unequally spaced energy levels in which a single electron can be found. Suppose a collection of the atoms are excited to the highest of the four levels. What is the maximum number of unique spectral lines that could be measured as the atoms relax and return to the lowest, ground state
Answer:
[tex]X=6[/tex]
Explanation:
From the question we are told that:
Energy levels [tex]n=4[/tex]
Generally, the equation for spectral lines is mathematically given by
[tex]X=\frac{n(n-1)}{2}[/tex]
[tex]X=\frac{4(4-1)}{2}[/tex]
[tex]X=6[/tex]
An outdoor gear company develops a new type of fabric that works with electricity to warm the body without interfering with motion like heavy jackets do. Research biologists, studying life in extremely cold conditions on the polar ice caps, begin wearing the new fabric because it helps them work more comfortably, and they find it increases their productivity.
What best describes how the processes of scientific investigation and technological design are involved in this situation?
The clothing company conducted a scientific investigation to communicate results to researchers, who then used the knowledge in a technological design.
The clothing company conducted a scientific investigation to produce a product that researchers could then test while designing new technology.
The clothing company used technological design to create a product that helped aid researchers conducting a scientific investigation.
The clothing company designed a new technology that provided information researchers needed in order to continue with their scientific investigation.
Answer:
C: The clothing company used technological design to create a product that helped aid researchers conducting a scientific investigation.
Explanation:
I just did the assignment on EDGE2020 and it's 200% correct!
Also, heart and rate if you found this answer helpful!! :) (P.S It makes me feel good to know I helped someone today!!) :)
Prove the equilibrium law of pressure kp=kc(RT)^delta n
The solution is in the pictures because the picture is large, so I cut it and also put numbers on it to know it in sequence .
I hope I helped you^_^
what surface phenomenon s
The special properties of surface layers, that is, the thin layers of a substance at the boundary of contiguous bodies, mediums, or phases. These properties result from the excess free energy of the surface layer and from the special features of the layer's structure and composition.
HOPE IT'S HELPFUL FOR U MATE...
Define the following terms - you may need to consult your lecture text or other suitable resource:
a. monomer,
b. repeating unit,
c. condensation polymerization,
d. cross-linked polymer
Answer:
a) Monomers: monomers are unit molecules, that can react together with other monomers, to form a long chain molecule called a polymer. Th polymer formed can also be in a three dimensional network. The process of this conversion of monomers to polymers is called polymerization.
b) Repeating unit: A repeating unit is a unit of the polymer formed, whose repetition would produce a long complete polymer chain. A polymer is made up of these repeating links of molecules that form a long chain of molecules.
c) Condensation polymerization: This is a form of condensation reaction, that involves the combination of molecules into polymers with the loss of small molecules such as water or methanol as by products.
d) Cross-linked polymer: This is a polymer formed from a type of bonding of molecules. The bonding is usually in the form of covalent bonds or ionic bonds and the polymers can be either synthetic polymers or natural polymers. The cross-links leads to an alteration in the physical properties of the polymer.
The definition of following terms are :
a) Monomers:
The monomers are unit atoms, that can respond in conjunction with other monomers, to create a long chain molecule called a polymer.
The polymer shaped can too be in a three dimensional arrange.
b) Repeating unit:
A rehashing unit may be a unit of the polymer shaped, whose reiteration would produce a long total polymer chain.
A polymer is made up of these rehashing joins of atoms that shape a long chain of molecules.
c) Condensation polymerization:
This is often a frame of condensation response, that includes the combination of particles into polymers with the misfortune of little particles such as water or methanol as by products.
d) Cross-linked polymer:
This can be a polymer shaped from a sort of holding of particles.
The cross-links leads to an modification within the physical properties.
DefinitionsDefinition is a rhetorical style that uses various techniques to impress upon the reader the meaning of a term, idea, or concept.
Definition may be used for an entire essay but is often used as a rhetorical style within an essay that may mix rhetorical styles.
Learn more about "Polymers":
https://brainly.com/question/17804565?referrer=searchResults
f the Ksp for HgBr2 is 2.8×10−14, and the mercury ion concentration in solution is 0.085 M, what does the bromide concentration need to be for a precipitate to occur?
Answer:
0.057 M
Explanation:
Step 1: Given data
Solubility product constant (Ksp) for HgBr₂: 2.8 × 10⁻⁴
Concentration of mercury (II) ion: 0.085 M
Step 2: Write the reaction for the solution of HgBr₂
HgBr₂(s) ⇄ Hg²⁺(aq) + 2 Br⁻
Step 3: Calculate the bromide concentration needed for a precipitate to occur
The Ksp is:
Ksp = 2.8 × 10⁻⁴ = [Hg²⁺] × [Br⁻]²
[Br⁻] = √(2.8 × 10⁻⁴/0.085) = 0.057 M
Consider the following chemical equation: NH4NO3(s)⟶NH+4(aq)+NO−3(aq) What is the standard change in free energy in kJmol at 298.15K? The heat of formation data are as follows: ΔH∘f,NH4NO3(s)=-365.6kJmolΔH∘f,NH+4(aq)=-132.5kJmolΔH∘f,NO−3(aq)=-205.0kJmol The standard entropy data are as follows: S∘NH4NO3(s)=151.1Jmol KS∘NH+4(aq)=113.4Jmol KS∘NO−3(aq)=146.4Jmol K Your answer should include two significant figures.
Answer:
[tex]\Delta _rG=-4.3\frac{kJ}{mol}[/tex]
Explanation:
Hello,
In this case, for the given dissociation reaction, we can compute the enthalpy of reaction considering the enthalpy of formation of each involved species (products minus reactants):
[tex]\Delta _rH=\Delta _fH_{NH^{4+}}+\Delta _fH_{NO_3^-}-\Delta _fH_{NH_4NO_3}\\\\\Delta _rH=-132.5+(-205.0)-(-365.6)=28.1kJ/mol[/tex]
Next, the entropy of reaction considering the standard entropy for each involved species (products minus reactants):
[tex]\Delta _rS=S_{NH^{4+}}+S_{NO_3^-}-S_{NH_4NO_3}\\\\\Delta _rS=113.4+146.4-151.1=108.7J/mol*K[/tex]
Next, since the Gibbs free energy of reaction is computed in terms of both the enthalpy and entropy of reaction at the given temperature (298.15 K), we finally obtain (two significant figures):
[tex]\Delta _rG=\Delta _rH-T\Delta _rS\\\\\Delta _rG=28.1kJ/mol-(298.15 K)(108.7\frac{J}{mol*K}*\frac{1kJ}{1000J} )\\\\\Delta _rG=-4.3\frac{kJ}{mol}[/tex]
Best regards.
Which of the following do we need to know in order to calculate pH during an acid-base titration of a strong monoprotic acid with a strong monoprotic base? Select all that apply
a. the concentration of the acid
b. the concentration of the base titrant
c. the initial volume of the acid solution
d. the volume of the titrant used
Answer:
the volume of the titrant used
Explanation:
Acid-base titrations are usually depicted on special graphs referred to as titration curve. A titration curve is a graph that contains a plot of the volume of the titrant as the independent variable and the pH of the system as the dependent variable.
Hence, a titration curve is a graphical plot showing the pH of the analyte solution plotted against the volume of the titrant as the reaction is in progress. The titration curve is drawn by plotting data obtained during a titration, that is, volume of the titrant added (plotted on the x-axis) and pH of the system (plotted on the y-axis).
A galvanic cell is powered by the following redox reaction:
2Zn2+(aq) + N2H4(aq) 4OH-zn2+ right arrow(aq) 2Zn(s) + N2(g) + 4H2O(I)
1. Write a balanced equation for the half-reaction that takes place at the cathode.
2. Write a balanced equation for the half-reaction that takes place at the anode.
3. Calculate the cell voltage under standard conditions.
discuss four factors of learning
Answer:
plz mark as BRAINLIEST plz...
Explanation:
●Intellectual factor: The term refers to the individual mental level. ...
●Learning factors: ...
●Physical factors: ...
●Mental factors: ...
While balancing a chemical equation, we change the _____ to balance the number of atoms on each side of the equation.
Answer:
While balancing a chemical equation, we change the coefficient to balance the number of atoms on each side of the equation
Explanation:
While balancing a chemical equation, we change the coefficient to balance the number of atoms on each side of the equation.
What is chemical equation?To summarize in chemistry terms, a chemical equation depicts the initial chemicals, or reactants, on the left-hand side and the final compounds, or products, just on right-hand side, divided by an arrow. In the chemical equation, the number of atoms in each element as well as the total charge are the same on opposite of the equation's sides.
Chemical equations are used in chemistry to depict chemical processes by writing the reactants and products in terms of their corresponding chemical formulas. While balancing a chemical equation, we change the coefficient to balance the number of atoms on each side of the equation.
Therefore, while balancing a chemical equation, we change the coefficient to balance the number of atoms on each side of the equation.
To know more about chemical equation, here:
https://brainly.com/question/29028257
#SPJ6
A strand of messenger RNA coding the synthesis of a protein with 146 amino acids must have a string of___________ bases along its backbone. a. 146 b. 292 c. 438 d. 20 e. 3
Answer:
Since the relationship between amino acid and codon bases would be the values of 3 nitrogenous bases per 1 amino acid.
knowing this relationship what you would do is simply multiply 146 x 3 to find the number of codon bases which would be C. 438.
A strand of messenger RNA coding the synthesis of a protein with 146 amino acids must have a string of 438 bases along its backbone and the correct option is option C.
What is messenger RNA?mRNA or messenger RNA is a single stranded RNA molecule. It is complementary to the DNA and carries genetic information present in the DNA. It is translated to form proteins. The genetic codes (triplet) present on mRNA get translated to amino acids, giving rise to the functional product of a gene.
So mRNA really is a form of nucleic acid, which helps the human genome which is coded in DNA to be read by the cellular machinery. mRNA is actually the translated form of DNA that the machinery can recognize and use to assemble amino acids into proteins.
Each strand has 3 bases, so 146 × 3 = 438 bases
Therefore, A strand of messenger RNA coding the synthesis of a protein with 146 amino acids must have a string of 438 bases along its backbone and the correct option is option C.
Learn more about messenger RNA, here:
https://brainly.com/question/15837874
#SPJ3
Each energy sublevel contains __________ number of electrons. For example, sublevel D can hold up to _______ electrons. A. the same, 10 B. the same, 14 C. a different, 6 D. a different, 10
Answer:
Each energy sublevel contains a different number of electrons. For example, sublevel D can contain up to 10 electrons
Explanation:
The atoms are surrounded by propellers that within each propeller there is a certain number of electrons, these electrons jump from orbit to orbit according to the amount of energy they have. The four levels that make up the electronic cloud that surrounds an atom are: s p d f.
When these electrons change orbit or level they release energy in the form of light, which is known as a photon.
Compounds A and B (both C10H14) show prominent peaks in their mass spectrum at m/z 134 and 119. Compound B also shows a less prominent peak at m/z 91. On vigorous oxidation with chromic acid, compound A is nonreactive while compound B yielded terephthalic acid.
Required:
From this information, deduce the structures of both compounds, and then draw the structure of B.
Comparing the 2-bromobutane + methoxide and 2-bromobutane + t-butoxide reactions, choose the statements that BEST describe the data and mechanism. a. the mechanism for this reaction is E2 b. an increase in 1-butene was observed when t-butoxide was used c. an increase in 1-butene was observed when methoxide was used d. the mechanism for this reaction is E1 e. no significant difference was observed
Answer:
an increase in 1-butene was observed when t-butoxide was used
Explanation:
When a base reacts with an alkyl halide, an elimination product is formed. This reaction is an E2 reaction.
Here we are to compare the reaction of two different bases with one substrate; 2-bromobutane. Both reactions occur by the E2 mechanism but follow different transition states due to the size of the base.
The Saytzeff product, 2-butene, is obtained when the methoxide is used while the non Saytzeff product, 1-butene, is obtained when t-butoxide is used.
The Saytzeff rule is reliable in predicting the major products of simple elimination reactions of alkyl halides given the fact that a small/strong bases is used for the elimination reaction. Therefore hydroxide, methoxide and ethoxide bases give similar results for the same alkyl halide substrate. Bulky bases such as tert-butoxide tend to yield a higher percentage of the non Saytzeff product and this is usually attributed to steric hindrance.