A worker lifts a 10 kilogram block a vertical height of 2 meters. The work he does on the block is:

Permanent dipoles are created by the interaction of permanent charges, which are charges that do not lose their charge when they are separated, as opposed to temporary dipoles, which form when two unlike poles come into contact and then separate.

Permanent dipoles are strong; they can be formed even when there is no electrical current present. The strength of a permanent dipole depends on its size and intensity, but it's typically much stronger than a temporary dipole.

Dispersion forces are weaker than both permanent dipoles and temporary dipoles. They can be generated by any two objects whose surfaces have different charges, regardless of whether there is an electrical current present or not.

The strength of dispersion forces depends on the size and intensity of the charged object, but it's typically much weaker than a permanent or temporary dipole.

To learn more about dipoles visit: https://brainly.com/question/14173758

#SPJ4

When the ball is caught, it is moving at a speed of 3 m/s. Distance/time is the formula for calculating speed.

You must time how long it takes from when the ball is released until the pin is struck using a stopwatch. By dividing the distance by the time, one may calculate the ball's speed.

The average speed, if it was 3 seconds,

would be 42/14, or 3 feet per second .

Build a launcher for balls. I made use of an exercise rubber band and the legs of a patio chair.

horizontally when you shoot the ball. For this to operate, the camera angle must be horizontal.

Calculate how long the ball has been in the air.

The ball's distance traveled should be measured.

Simply dividing the distance by the launch time yields the launch speed.

To learn more about Speed refer to:

https://brainly.com/question/13943409

#SPJ4

a) The interval with the greatest rate of change is between the points (4.9, 40) and (5.6, 50).

b) This rate in the above interval was of 14.3 m/s.

The average rate of change of a function is obtained by the change in the output divided by the change in the input. Hence, over an interval [a,b], the average rate of change is obtained as follows:

[tex]r = \frac{f(b) - f(a)}{b - a}[/tex]

For each interval, the rates are given as follows:

More can be learned about the rate of change at https://brainly.com/question/24313700

#SPJ1

The correct expression for the acceleration magnitude {a}aa of the stunt woman from from the above given task is: m(a + g).

The correct option is b.

The complete image is attached.

It follows that one of the Newton law motion describes a system that in every action, there is equal and opposite reaction. In order words, no reaction will occur without an action.

That being said, the stunt woman from the above given task possesses a mass m which will ultimately be falling under acceleration due to gravity. This means that the acceleration, a by the process equals gravitational acceleration, g under standard conditions. It is on this premise that her acceleration magnitude {a}aa is given by m(a + g).

In conclusion, we now know from the detailed explanation and image above that the magnitude of the woman is m(a + g).

Complete question:

A stunt woman of mass m falls into a net during the filming of an action movie. She experiences a normal force magnitude {F_n}F

n

F, start subscript, n, end subscript while touching the net.

Which of the following statements is correct for the acceleration magnitude {a}aa of the stunt woman?

Consider upward as the positive direction

a. m(a - g).

b. m(a + g).

c. m(a + g + m)

d. None of the above.

Read more on mass:

https://brainly.com/question/25959744

#SPJ1

The force exerted by the sprinter who is having a mass of 60 kg and accelerating at 15 m/s² is 900 N

The acceleration of the sprinter is 15 m/s²

The mass of the sprinter is 60 kg

The force exerted by the printer can be found using the formula,

                 F = ma

where F is the force exerted by the sprinter

          m is the mass of the sprinter

          a is the acceleration of the sprinter

Let us substitute the known values in the above equation, we get        

                          F = 60 x 15

                             = 900 N

Therefore, the force exerted is 900 N

Learn more about the force in

https://brainly.com/question/17238121

#SPJ4

Neutrinos generated in the core of the sun travel to the surface so quickly, compared to gamma ray photons because they don't interact with electromagnetic forces.

Neutrinos are neutral, massless particles. Because of their lack of mass, neutrinos can travel through space faster than photons. They have no electric charge, so they don't interact with electromagnetic forces. They also have no strong interactions and only weak ones, which means they can pass through matter without interacting with it at all.

Gamma rays are another type of radiation that originates from nuclear reactions in stars like our sun. however, photons are affected by gravity and other forces just like any other particle would be when moving at these speeds. They're also absorbed by matter much more readily than neutrinos are because they do interact electromagnetically with other particles around them.

To learn more about Neutrinos visit: https://brainly.com/question/17116689

#SPJ4

Erosion is the moving of soil by water, which represent a geological process able to shape the features of different rock layers.

The geological erosion is the process by which natural forces such as winds and also water may shape a given layer of rock, which occurs at a geological scale because it is a slow phenomenon.

Therefore, with this data, we can see that the erosion process is a slow phenomenon that shape the geographic features of layers of rocks on the Earth surface.

Learn more about the geological erosion process here:

https://brainly.com/question/12976130

#SPJ1

The final velocity is 163.04m/s.

Solution:

Use equation x = 1/2at^2

402.3 = 5a(4.9360^2

A = 33.03m/s^2

Final velocity

V = Vo +at

= 0 + 33.03(4.936) = 163.04m/s

Velocity is the rate of change of position with respect to time, and acceleration is the rate of change in velocity. Both are vector quantities, but velocity is in meters/second and acceleration is in meters/second squared. Determines the height from which the object fell. Multiply the height by the acceleration of the object due to gravity.

Acceleration is the rate of change of velocity over a specified time. Calculate acceleration by dividing the change in velocity by the change in time. People mistakenly believe that the terminal velocity of a falling object is zero because the object stops as soon as it hits the ground. In physical tasks, terminal velocity is the velocity just before touching the ground. Objects no longer free fall when colliding with the ground.

Learn more about Final velocity here:-https://brainly.com/question/25905661

#SPJ4

The magnitude of the buoyant force is equal to the weight of the fluid displaced by the object if and only if the object is partially or completely submerged in a liquid.

When a rigid object is immersed in a fluid (completely or partially), it experiences an upward force equal to the weight of the fluid displaced by the object.

This is referred to as Archimedes' principle.

[tex]F_{b}[/tex]= -ρgV

[tex]F_{b}[/tex]  = force of buoyancy

ρ = density of fluid

g = gravitational acceleration

V = volume of fluid

If an object is partially or completely submerged in fluid, the fluid displacement is equal to the magnitude of the buoyant force.

Thus, The magnitude of the buoyant force is equal to the weight of the fluid displaced by the object if - For every object partially or completely submerged in a liquid.

To know more about buoyant force, visit:

https://brainly.com/question/21990136

#SPJ4

It has a 2952 J initial rotational energy.

492 kg-m2/s represents its moment of momentum.

13.67 rad/s of angular momentum is conserved.3364J

A) is the final rotational kinetic energy. The rotational energy of it at first is

KE=[tex]\frac{1}{2}\\[/tex]Iω²

=[tex]\frac{1}{2}\\[/tex]

=[tex]2952J[/tex]

B) Her angular momentum is

L=Iω

=(41)(12)

= 492 kg-m²/s

C) Angle momentum is kept constant. Therefore, even if he draws his hands in, nothing will change. She still has 492 kg-m2/s of angular momentum after pulling her arms back. Her moment of inertia has altered, though. L must therefore change in order for its angular velocity to remain constant.

L=Iω

ω=L/I

=492/36

= 13.67 rad/s

D) So her final rotational kinetic energy is

KE=[tex]\frac{1}{2}\\[/tex]Iω²

 =[tex]\frac{1}{2}\\[/tex][tex](36) (13.67)[/tex]

=[tex]3364J[/tex]

Learn more about angular momentum here:

https://brainly.com/question/15104254

#SPJ4

By way of Ohm's Law, the voltage drop is proportional to the cutting-edge flowing thru a resistor. (So in numerous collection resistors with the same resistance, the drop across each one is identical, because the present day throughout each one is equal).

The connection between the current, voltage, and resistance is expressed through Ohm's regulation. This states that the modern-day flowing in a circuit is at once proportional to the implemented voltage and inversely proportional to the resistance of the circuit, provided the temperature stays steady.

Resistors in the collection deliver identical cutting-edge, however, the voltage drop throughout them isn't the same as their man or woman resistance values will create one-of-a-kind voltage drops across every resistor as decided by way of Ohm's regulation ( V = I*R ).

Learn more about resistors here:-https://brainly.com/question/24858512

#SPJ4

The direction of the velocity of the object is 3.6 m/s.

Velocity is the directional pace of an item in motion as an indication of its rate of exchange in the role as determined from a selected frame of reference and as measured by way of a selected standard of time.

Average velocity is defined as the trade in position or displacement (∆x) divided by the time durations (∆t) wherein the displacement takes place. The common velocity can be effective or negative depending upon the sign of the displacement. The SI unit of average velocity is meters per second (m/s or ms-1).

Given;

m = 500g = 0.5 kg

r = 40 cm = 0.4 m

T = 0.7 sec

The perimeter of circular rotation = 2πr

                                                        = 2 ×π (0.4)

                                                        = 2.51 m

Speed = distance traveled / total time taken

          = 2πr/T

          = 2.51/0.7

          = 3.59 m/s

speed = 3.6 m/s

Learn more about velocity here:-https://brainly.com/question/24445340

#SPJ4

The height of the cliff is 121.75 m.

An equation of motion, describes the behavior of a physical system in terms of motion as a function of time. More specifically, the equations of motion describe the behavior of a physical system as a set of mathematical functions related to dynamic variables. The equations of motion are:

For the given case we will use the following equation:

s = ut + 1 / 2 gt²

s = Height of the cliff

u = Initial velocity of rock (5 m/s)

a = Gravitational acceleration (9.8 m/s²)

t = Time (4.5 sec.)

s = (5 × 4.5) + ( 1 / 2 × 9.8 × 4.5² )

s = 22.5 + 99.25

s = 121.75 m

To know more about equations of motion, visit:

https://brainly.com/question/14355103

#SPJ1

Yes it will affect the number of magnetic field lines travelling through the coil changes when the magnet is moved inside a coil of wire.

How is the first law of Faraday formulated?

The first and second laws of electrolysis by Faraday, which are as follows, govern the electrolysis process: The charge (mQ m Q) has a direct relationship with the mass of material liberated (or deposited).

According to Faraday, the variation in the number of field lines traversing the wire coil is what creates the induced electromagnetic field (EMF) in the loop. The rate of change in the number of magnetic field lines that pass through the loop, in particular, is what determines the induced emf. The term "magnetic flux" is similar to the term "electric flux," and it refers to the number of field lines that are passing through a surface.

To know more about Faraday law visit:

https://brainly.com/question/2485899

#SPJ4

The acceleration of the car is - 7.08 m/s².

The rate at which a body's displacement changes in relation to time is known as its velocity. Velocity is a vector quantity with both magnitude and direction. SI unit of velocity is meter/second.

Given parameters:

Initial velocity of the car; u = 32.78 m/s.

Take taken to stop it; t = 4.63

Then, the acceleration of the car: a =( final velocity - initial velocity) /time

= (0 - 32.78)/4.63 m/s².

= - 7.08 m/s².

Negative sign indicates that the velocity is decreasing at that rate.

So, the acceleration of the car is - 7.08 m/s².

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ1

The magnitude of the acceleration is -36 m/s² since the toy car is stopping thus, -36 is the deceleration of the toy.

The Force of the object is the product of the mass of the object with the acceleration with which it is moving. It is the vector product. The SI unit of force is Kg-m/s² or Newton(N). The equation for the force is,  

F = ma

where F = Force

m = mass

a = acceleration

The values given for force f = 9.0N,  m = 0.25kg

∴ F = ma

9.0 = 0.25 × a

a = 36 m/s²

Hence, the negative sign indicates the deceleration of the toy car thus the magnitude is -36m/s².

Learn more about acceleration here https://brainly.com/question/25876659

#SPJ4

YES, if it is known that now the external electric field equals zero everywhere, then you can infer that external magnetic field also is zero.

The region surrounding a magnet that experiences the effects of magnetism is known as the magnetic field. When describing the distribution of the magnetic force within and around a magnetic object in nature, the magnetic field is a useful tool.

The vicinity of a magnet that exhibits magnetic force is known as the magnetic field. South and north poles are found on every magnet. The opposite poles are drawn to one another, whereas the same poles are drawn away from one another. The atoms in iron have north-seeking poles that line up in the exact direction when it is rubbed against a magnet.

To know more about magnetic field visit:

https://brainly.com/question/23096032

#SPJ4

The wave's frequency is 0.35 Hz, and its velocity is 0.9857 m/s. Wave speed is the amount of space a wave covers in a certain length of time, such as how many meters it covers in a second.

Despite the fact that technically, velocity implies both direction and speed wave velocity is most often used to describe speed. Wave intensity has no bearing on a wave's velocity, which is determined by the product of the its wavelength and frequency.

A stationary point is traversed by waves at a specific frequency over a specified period of time. The following equation demonstrates the connections between the three variables: Wavelength × Wave Frequency = Speed. This equation uses the units of meters for wavelength and hertz (Hz) for frequency, or the number many waves per second.

To know more about wave speed visit:

https://brainly.com/question/28446485

#SPJ4

If the moon orbits the Earth at a distance of 3.84 x 10⁸ on a path that takes 27.3 days to complete, its centripetal acceleration will be 2.7x 10⁻³ m/s².

A body moving in a circular path at a high rate of speed is said to be experiencing centripetal acceleration. We can calculate the moon's centripetal acceleration using the centripetal acceleration formula.

We are informed that the moon is approximately 3.84 x 10⁸ miles away from Earth and that a full rotation of the moon takes 27.3 days.

The distance traveled by the moon in 27.3 days is its velocity.

v = x/t

v = 2 πr/t

v = 2.41x10⁹/2.35x10⁶

v = 1025.5

The radius is 3.84 x 108 m and the velocity is 1,025.5 m/s. Here, we will determine the centripetal acceleration of the moon.

[tex]a_{c}[/tex] = v²/r

[tex]a_{c}[/tex] = (1025.5)²/3.84 x 10⁸

[tex]a_{c}[/tex] = 2.7 x 10⁻³

We now know the centripetal acceleration of the moon to be 2.7 103 m/s².

To know more about centripetal acceleration visit:

https://brainly.com/question/14465119

#SPJ4

If the heavier object and the heavier object are moving at the same speed, the answer is yes.

To learn more about kinetic energy refer to:

https://brainly.com/question/25959744

#SPJ4

the self-inductance is 0.425V.s/A

emf = L*di/dt

L = emf/ di/dt  = 51/120 = 0.425V.s/A

Self-inductance is a characteristic of the current-carrying coil that opposes or resists changes in the current that passes through it. The self-induced emf generated in the coil itself is mostly responsible for this. Self-inductance is a phenomenon that occurs when a voltage is induced in a current-carrying wire, to put it simply.

When the current increases or drops, the coil's self-induced emf will oppose both movements. Essentially, if the current is increasing, the induced emf's direction is opposite that of the applied voltage, and if the current is decreasing, its direction is similar to that of the applied voltage.

Learn more about  self-inductance here:

https://brainly.com/question/28167218

#SPJ4

The resultant velocity will have largest absolute value when the two velocities are parallel and moving opposite direction.

option B is the correct answer

The resultant velocity of two vectors is the single vector that can represent the two vectors effectively in terms of magnitude and direction.

Mathematically, the formula for determining the resultant of two vectors is given as;

R² = v₁² + v₂² - 2v₁v₂cos(θ)

where;

From the above formula, the resultant velocity will have largest absolute value when;

Learn more about resultant velocity here: https://brainly.com/question/24767211

#SPJ1

A conductor having no covering or electrical insulation There is absolutely no electrical insulation or coating on a conductor is bare.

Any object used as insulation in a building for thermal management is known as building insulation. The term refers to acoustic, fire, and impact insulation in addition to the majority of insulation used in buildings, which is for thermal purposes. Because it can accomplish several of these tasks at once, insulating materials are frequently used.

Building insulation is a crucial investment in both the economy and the environment. Insulation reduces the energy needed to heat and cool a building, as well as the thermal turbulence that its occupants experience. Adding more insulation to existing structures is a key strategy for reducing greenhouse gas emissions, particularly in regions where energy production is carbon-intensive.

Learn more about insulation here:

https://brainly.com/question/5013577

#SPJ4

5:6 is the ratio of linear speed of two runners in jogging. The rate at which an object's position changes in relation to a frame of reference is known as its velocity, and it depends on time.

The directional speed of an item in motion, as measured by a specific unit of time and observed from a certain point of reference, is what is referred to as velocity.

The primary indicator of an object's position and speed is its velocity. It is the distance that an object travels in one unit of time. The displacement of the item in one unit of time is the definition of velocity.

The speed of the person one at the radium is v1=15

The speed of the person two at the radium is v2=18

The ratio be 15:18  , The 15 and 18 are the common multiple of 3

Therefore 5:6

The rate at which an object's position changes in relation to a frame of reference is known as its velocity, and it depends on time. A specification of a thing's speed and direction of motion is what velocity is.

To learn more about velocity refer to:

https://brainly.com/question/24445340

#SPJ4

Answer:

6 m/sec square

Explanation:

We can assume that man-hour is a unit of power. Both man-hour and kilowatt-hour are units for power. The difference between them is that the second one can be quantified while the first one cannot.

Power has a wide range of meanings in everyday life, but in physics, it has a very specific meaning. Power is defined to be work over elapsed time. This can be mathematically expressed as P = W/t where P is power, W is work, and t is elapsed time.

If work is done faster, the power is higher. Power is smaller when work is done slower.

The standard unit used to measure power is watt (symbolized W, not to be confused with work which is a quantity, not a unit). 1 kilowatt-hour is equal to 1,000 watts. Another widely-used unit of power is the horsepower (symbolized hp).

Learn more about power here: https://brainly.com/question/1634438

#SPJ4

3.813m far will child b have moved when he collide with child a.

We know that,

[tex]x_{cm}[/tex]=[tex]\frac{m_{a} x_{a} +m_{b} x_{b} }{m_{a}+x_{b} }[/tex]

[tex]x_{cm}[/tex]=26(0)+49(11)/26+49=7.187

A=From a is 7.187m

B=we forces know that, the internal can't change the motion of CM. SO they will meet Collide at their C.M.

B has to move the distance from B→C.M. So they will meet Collide at their C.M B will forces.

11-7.187 = 3.863

Learn more about Collide here:

https://brainly.com/question/2289284

#SPJ4

The distance roller pushed is 54.7 meter when a lawn roller is rolled across a lawn by a force of 115 N along the direction of the handle.

To know more about distance visit:

https://brainly.com/question/15172156

#SPJ4

(e)The four Galilean moons formed with Jupiter, most others were later captures

To learn more about Jupiter, refer to

https://brainly.com/question/15044627

#SPJ4