Answer:
Ksp = 8.8x10⁻⁵
Explanation:
Full question is:
After mixing an excess PbCl2 with a fixed amount of water, it is found that the equilibrium concentration of Pb2+ is 2.8 × 10–2 M. What is Ksp for PbCl2?
When an excess of PbCl₂ is added to water, Pb²⁺ and Cl⁻ ions are produced following Ksp equilibrium:
PbCl₂(s) ⇄ Pb²⁺ + 2Cl⁻
Ksp = [Pb²⁺] [Cl⁻]²
If an excess of PbCl₂ was added, an amount of Pb²⁺ is produced (X) and twice Pb²⁺ is produced as Cl⁻ (2X):
Ksp = [X] [2X]²
Ksp = 4X³
As X is the amount of Pb²⁺ = 2.8x10⁻²M:
Ksp = 4(2.8x10⁻²)³
Ksp = 8.8x10⁻⁵The density of a nickel coin was determined by laboratory measurement to be 728 g/mL. A nickel has a mass of 5.040 grams. What is the volume of the nickel?
0.6923 mL
0.692 ml
оооо
36.3 mL
1.43 mL
Answer:
The answer is 0.6923 mLExplanation:
The density of a substance can be found by using the formula
[tex]Density = \frac{mass}{volume} [/tex]
Making volume the subject we have
[tex]volume = \frac{mass}{Density} [/tex]From the question
Density = 728 g/mL
mass of nickel = 5.040 g
Substitute the values into the above formula and solve for the volume
That's
[tex]volume = \frac{5.040}{728} \\ = 0.692307[/tex]
We have the final answer as
Volume of nickel = 0.6923 mLHope this helps you
Answer:
The answer would be 0.6923 mL :)
what is colloidal solutions
Explanation:
Colloidal solutions, or colloidal suspensions, are nothing but a mixture in which the substances are regularly suspended in a fluid. ... Colloidal systems can occur in any of the three key states of matter gas, liquid or solid. However, a colloidal solution usually refers to a liquid concoction.
Answer:
Colloidal solutions, or colloidal suspensions, are nothing but a mixture in which the substances are regularly suspended in a fluid.
A balloon has a volume of 4100 cm? What is the volume in liters?
A balloon has a volume of 4100 cm. The volume in liters is 4100000.
What are liters and cubic meters?Liters and cubic meters are the measurement unit of liquid. They are used to write the value of the measurements. There are seven basic units of measurement. The values are liters, kg, meters, grams, milliliters, etc.
A liter is a measurement unit for volume in the metric system. One liter equals 0.001 cubic meters. 1 liter equals 1000 ml. Cubic meters is the SI unit of volume. It is a volume of a cube with a length of 1 cm.
To calculate the value of cubic meters. The calculation of all dimensions is done. The dimensions include length, breadth, and height. A cubic decimeter occupies a volume of 10 cm × 10 cm × 10 cm.
Thus, the volume in liters is 4100000.
To learn more about liters and cubic meters, refer to the link:
https://brainly.com/question/1659963
#SPJ2
The picture shows an element. Based on the information in the periodic table which element is shown in the picture? Carbon, Boron, lithium, helium! Please hurry guys
Answer:
Carbon
Explanation:
It has 6 protons... carbon has 6 protons
is ethyl ether a polar molecule
Answer:
Ethyl ethers are Non-polar solvent and can extract polar molecules such as fatty acids
How does the strength of the bar magnet affect the current in the pickup coil?
Answer:
The induction of current increases in the coil.
Explanation:
The strength of the bar magnet affect the current in the pickup coil because the magnetic field produced by the bar magnet interfere with the field of he coil. By moving the bar magnet in and out of the coil so induction of electric current will be occurs in the soil. If a bar magnet with more strength is moving in the coil then more current will be induced inside the coil.
The rate constant for a reaction is 4.65 L mol-1s-1. What is the overall order of the reaction? zero
Answer:
second order
Explanation:
units of reaction and their order.
Zero order --> M^1 s^-1 = M/s
First order --> M^0 s^-1 = 1/s
Second order --> M^-1 s^-1 = L/mol s
In the question rate constant k = 4.65 L mol-1s-1. = 4.65 L/mol s
Hence, the reaction is a second order reaction
Answer:
The answer is "second".
Explanation:
Given:
rate constant for a reaction = 4.65 [tex]\frac{L}{mol \cdot s}[/tex]
[tex]\text{The rate of unit} = \frac{m}{s} \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ _{where} \ \ M=\frac{mol}{l} \\\\[/tex]
[tex]=\frac{mol}{l \cdot s}[/tex]
The orders unit value of the k
0 [tex]\frac{m}{s}[/tex]
1 [tex]\frac{1}{s}[/tex]
2 [tex]\frac{l}{m s}[/tex]
The rate of the unit is constant for the second-order that's why it is correct.
An intramuscular medication is given at 20 mg/kg of body weight. If you give 560 mg of medication to a patient, what is the patient’s weight in pounds? (1 kg = 2.20 lbs)
Answer:
62 lb
Explanation:
Step 1: Given data
Dosage of the intramuscular medication: 20 mg/kg of body weight
Mass of the intramuscular medication: 560 mg
Step 2: Calculate the body weight of the patient
560 mg IM × (1 kg BW/20 mg IM) = 28 kg BW
Step 3: Convert the body weight of the patient to pounds
We will use the relationship 1 kg = 2.20 lb.
28 kg × (2.20 lb/1 kg) = 62 lb
why is it essential to know the water temperature in this experiment- to find the vapor pressure of the water
Answer:
Vapour pressure of a liquid varies with temperature
Explanation:
The vapour pressure of any liquid is directly proportional to the temperature of the liquid. This implies that, as the temperature of the liquid increases, the vapour pressure increases likewise and vice versa.
Since the vapour pressure of liquid varies with the temperature of the liquid, it is essential to know the water temperature in the experiment to determine the vapour pressure of water.
Spongebob was trying to make Krabby Patties that weighed 12oz. He made 4 Krabby Patties. They all had the following weights: 12.12oz; 11.9oz; 12.2oz; 12.1oz. Is this an example of Accuracy? Precision? Both? Neither?
Answer:
Both accuracy and precision
Explanation:
This displays accuracy because the weights were all very close to 12 oz, which was the desired weight/true value. The weights only varied from 12 oz by 0.1 or 0.2 ounces.
Additionally, this displays precision because the weights were very close to each other as well. The weights only varied slightly, by 0.1 to 0.3 ounces
answer:
Both accuracy and precision
Explanation:
This displays accuracy because the weights were all very close to 12 oz, which was the desired weight/true value. The weights only varied from 12 oz by 0.1 or 0.2 ounces.
Additionally, this displays precision because the weights were very close to each other as well. The weights only varied slightly, by 0.1 to 0.3 ounces
Write an equation to show how perchloric acid, HClO4, reacts with water. Include states of matter in your answer. Click in the answer box to open the symbol palette.
Answer:
HClO4(aq) + H2O(l) ⇄ H3O+(aq) + ClO4-(aq)
Explanation:
When an acid dissolves in water, it will produce hydronium ion, H3O+ as the only positive ion.
perchloric acid, HClO4, being an acid will react with water, H2O to produce hydronium ion, H3O+ as shown below:
HClO4(aq) + H2O(l) ⇄ H3O+(aq) + ClO4-(aq)
A particular brand of gasoline has a density of 0.737 g/mL at 25 ∘C. How many grams of this gasoline would fill a 13.6 gal tank (1US gal=3.78L)? Express your answer to three significant figures and include the appropriate units.
Answer:
Mass, m = 37900 grams
Explanation:
Given that,
The density of a brand of gasoline is 0.737 g/mL at 25°C
We need to find mass of gasoline would fill a 13.6 gal tank.
Density is defined as mass per unit volume.
We know that, 1US gal=3.78L
So,
1US gal = 3785.41 mL
13.6 US gal = 51481.6 mL
So,
[tex]d=\dfrac{m}{V}\\\\m=d\times V\\\\m=0.737\ g/mL\times 51481.6\ mL\\\\m=37941.93\ g[/tex]
or
m = 37900 g (in three significant figures)
So, the mass of the gasoline is 37900 grams.
Mass, m = 37900 grams
Given that,
The density of a brand of gasoline is 0.737 g/mL at 25°C
find the mass of gasoline would fill a 13.6 gal tank.
Density is defined as mass per unit volume.
We know that, 1US gal=3.78L
So,
1US gal = 3785.41 mL
13.6 US gal = 51481.6 mL
So,
[tex]Density=\frac{mass}{volume}\\\\0.737\ g/mL=mass/51481.6\ mL\\mass=37941.9392\ g[/tex]
or
m = 37900 g (in three significant figures)
So, the mass of the gasoline is 37900 grams.
To know more about:-
https://brainly.com/question/25038476
Calculate the density of an object with a mass of 3.8 g, that when placed in a 10.0 mL graduated cylinder with an initial volume of 4.5 mL rises to a final volume of 8.6 mL. *
Answer : The density of an object is 0.93 g/mL
Explanation : Given,
Mass of an object = 3.8 g
Initial volume = 4.5 mL
Final volume = 8.6 mL
First we have to calculate the volume of an object.
Volume of an object = Final volume - Initial volume
Volume of an object = 8.6 mL - 4.5 mL
Volume of an object = 4.1 mL
Now we have to calculate the density of an object.
Formula used:
[tex]\text{Density}=\frac{\text{Mass of an object}}{\text{Volume of an object}}[/tex]
Now putting all the given values in this formula, we get:
[tex]\text{Density}=\frac{3.8g}{4.1mL}[/tex]
[tex]\text{Density}=0.93g/mL[/tex]
Therefore, the density of an object is 0.93 g/mL
Americium-241 is an alpha emitter used in household smoke detectors and K-40 is a positron emitter used to date rock samples. The daughter nuclides in these two reactions are:
Answer:
Np-237, Ar-40.
Explanation:
Alpha particle is positively charged particle having a mass of 4 unit. Hence,when alpha is removed from any isotope it produces a element having mass 4 units less than original isotope that was before emission. Americium 241 isotopes used in the smoke detector which emit an alpha particle to produce neptunium-237.
Potassium-40 emits positron which is having negative charge to lower one proton and increase one neutron number in the particle and in such way it will produce [tex]^{40}Ar_{18}[/tex] not [tex]^{40}Ca_{20}[/tex]
Answer:
Neptunium - 237 , Argon - 40 .
Explanation:
Americium - 241 ⇒ Neptunium - 237 + alpha particles
²⁴¹₉₅Am ⇒ ²³⁷₉₃Np + ⁴₂α
K-40 ⇒ Argon 40 + positron .
⁴⁰₁₉K ⇒ ⁴⁰₂₀Ar + ₁e
g Given that 50.0 mL of 0.100 M magnesium bromide reacts with 13.9 mL of silver nitrate solution according to the unbalanced equation MgBr21aq2 AgNO31aq2 S AgBr1s2 Mg1NO3221aq2 (a) What is the molarity of the AgNO3 solution
Answer:
0.719M AgNO₃
Explanation:
The balanced chemical equation is:
MgBr₂ + 2AgNO₃ ⇄ 2AgBr + Mg(NO₃)₂
Where 1 mole of magnesium bromide reacts completely with 2 moles of AgNO₃
Molarity is the ratio between moles of solution and its volume in liters (The volume of the solution is 13.9mL = 0.0139L). That means all we need is to determine moles of silver nitrate. It is possible to know by using the chemical equation, thus:
Moles AgNO₃:
Moles of MgBr₂:
50.0mL = 0.050L * (0.100mol / L) = 0.00500 moles of MgBr₂.
As 2 moles of AgNO₃ reacts per mole of MgBr₂ and the reaction occurs completely, moles of silver nitrate are:
0.00500 moles MgBr₂ * (2 moles AgNO₃ / 1 mole MgBr₂) =
0.0100 moles of AgNO₃ are in the solution.
And molarity is:
0.0100 moles AgNO₃ / 0.0139L =
0.719M AgNO₃An object has a mass of 5.52 g and a volume of 12 mL. What is the density of the object?
Answer:
Density = 0.46 g/mLExplanation:
Density of a substance can be found by using the formula
[tex]Density = \frac{mass}{volume} [/tex]From the question
mass = 5.52 g
volume = 12 mL
Substitute the values into the above formula and solve for the Density
That's
[tex]Density = \frac{5.52}{12} [/tex]We have the final answer as
Density = 0.46 g/mLHope this helps you
Answer:
Density is 0.46 g/mL
Explanation:
How many dm³ of hydrogen,measured at s.t.p.,would be needed to reduce 47.7g of copper(II) oxide to copper?
A. 4.48
B. 6.72
C. 10.82
D. 13.44
help a friend please....will mark brainliest
Answer:
D. 13.44 dm³
Explanation:
Step 1: Write the balanced equation
CuO + H₂ ⇒ Cu + H₂O
Step 2: Calculate the mass corresponding to 47.7 g of CuO
The molar mass of CuO is 79.55 g/mol.
47.7 g × (1 mol/79.55 g) = 0.600 mol
Step 3: Calculate the moles of H₂ that react with 0.600 mol of CuO
The molar ratio of CuO to H₂ is 1:1. The moles of H₂ are 1/1 × 0.600 mol = 0.600 mol.
Step 4: Calculate the volume of 0.600 moles of H₂ at STP
1 mol of any gas at STP has a volume of 22.4 dm³.
0.600 mol × (22.4 dm³/1 mol) = 13.44 dm³
Draw two cyclic constitutional isomers of cis-1-chloro-2-methylcyclobutane with the same size ring. In cases where there is only one cyclic constitutional isomer, just draw one structure.
Answer:
The drawings are in the figure attached below.
Explanation:
"Constitutional isomers" is a term used in chemistry to refer to chemical compounds that have the same constitution and molecular formula distributed in a different structure. That is, the compound has the same atoms, but when built in a three-dimensional image, these atoms occupy different places within the same structure.
Calculate the mass of a substance with a density of 1.98 g/mL and a volume of 265 mL.
Answer:
mass = 524.7 gExplanation:
The density of a substance can be found by using the formula
[tex]Density = \frac{mass}{volume} [/tex]
Making mass the subject we have
mass = Density × volumeFrom the question
Density = 1.98 g/mL
volume = 265 mL
Substitute the values into the above formula and solve for the mass
That's
mass = 1.98 × 265
We have the final answer as
mass = 524.7 gHope this helps you
Calculate the equilibrium constant for the reaction: 2 Cr + 3 Pb2+ ----> 3 Pb + 2 Cr3+ at 25oC. Eocell = 0.61 V
Answer:
The value is [tex]K = 8*10^{61}[/tex]
Explanation:
From the question we are told that
The equation is [tex]2 Cr + 3Pb^{2+} \to 3Pb + 2Cr^{3+}[/tex]
The temperature is [tex] T = 25^oC = 298 K [room \ temperature ][/tex]
The emf at standard condition is [tex]E^o_{cell} = 0.61 \ V[/tex]
Generally at the cathode
[tex]3Pb^{2+}(aq) + 6 e- --> 3Pb(s)[/tex]
At the anode
[tex]2Cr^{3+} + 6e^- \to 2Cr[/tex]
Generally for an electrochemical reaction, at room temperature the Gibbs free energy is mathematically represented as
[tex]G = n* F * E^o_{cell} [/tex]
Here n is the no of electron with value n = 6
F is the Faraday's constant with value 96487 J/V
=> [tex]G = 6 * 96487 * 0.61[/tex]
=> [tex]G = 3.5 *10^{5} \ J[/tex]
This Gibbs free energy can also be represented mathematically as
[tex]G = RTlogK[/tex]
Here R is the cell constant with value 8.314J/K
K is the equilibrium constant
From above
=> [tex]K = antilog^{\frac{G}{ RT} }[/tex]
Generally antilog = 2.718
=>[tex]K = 2.718^{\frac{3.5 *10^5}{ 8.314* 298} }[/tex]
=> [tex]K = 8*10^{61}[/tex]
Which of the following molecules is diamagnetic according to molecular orbital theory? A) N₂⁺ B) N₂⁻ C) CN D) CN⁻
Answer:
D) CN⁻
Explanation:
Hund's Rule of Maximum Multiplicity state that electrons go into degenerate orbitals of sub-levels (p,d, and f ) singly before pairing commences. Hund's rule is useful in determining the number of unpaired electrons in an atom. As such, it explains some magnetic properties of elements.
An element whose atoms or molecules contain unpaired electrons is paramagnetic. i.e., weakly attracted to substances in a magnetic field.
On the other hand, the element whose atoms or molecules are filled up with paired electrons is known as diamagnetic, i.e., not attracted by magnetic substances.
According to the molecular orbital theory, the diamagnetic molecule is CN⁻ because of the absence of unpaired electrons.
CN⁻ is diamagnetic according to molecular orbital theory.
Hund's Rule of Maximum Multiplicity
Before partnering, electrons enter deficient orbitals of sub-levels individually.
The Hund's rule may be used to calculate the number of unattached electrons in an atom. As a result, various magnetic characteristics of elements are explained.
A paramagnetic substance has unpaired electrons in its atoms or molecules. In a magnetic field, they are slightly attracted to substances.
According to the molecular orbital theory
Because there are no unattached electrons, the diamagnetic compound is CN⁻.
Learn more:
https://brainly.com/question/13254240?referrer=searchResults
Heat is added to a substance, but its temperature does not rise. Which one of the following statements provides the best explanation for this observation? (a) the substance must be a gas. (b) the substance must be a non-perfect solid. (c) the substance undergoes a change of phase. (d) the substance has unusual thermal properties. (e) the substance must be cooler than its environment.
Answer:
C
Explanation:
Heat is added to a substance, but its temperature does not rise
because
(c) the substance undergoes a change of phase.
Does heat change during a phase change?Heat, which is energy, either comes into the material during a change of phase or heat comes out of the material during this change.
What are the four-phase changes of heat?Melting, Condensation, Vaporization & Sublimation
Learn more about phase change here
https://brainly.com/question/13067020
#SPJ2
Draw the structural formula for ethynylcyclohexane.
Answer:
See attached picture.
Explanation:
Hello,
In this case, on the attached picture, you will find the required structure wherein we can see the ethynyl radical at the first carbon which is composed by two carbon atoms bonded via a triple bond due to the "ynyl" suffix. Moreover, the cyclohexane acts as the main chain.
Best.
A cup of gold colored metal bed was measured to have a mask for 25 g. By water displacement, the volume of the bed was calculated to be 40.0 mL. Given the following densities, identify the metal. Gold equals 19.3 g/milliliters copper equals 8.86 g/milliliters bronze equals 9.87 g/milliliters
Answer : The metal is copper.
Explanation :
As we are given that:
Mass of metal = 25 g
Volume of metal = 40.0 mL
Formula used:
[tex]\text{Density of metal}=\frac{\text{Mass of metal}}{\text{Volume of metal}}[/tex]
Now putting all the given values in this formula, we get:
[tex]\text{Density of metal}=\frac{25g}{40.0mL}[/tex]
[tex]\text{Density of metal}=8.86g/mL[/tex]
From this we conclude that the metal is copper whose density is 8.86 g/mL.
Hence, the metal is copper.
What is the difference between a volume that is delivered and a volume that is contained?
Answer:
When the graduation line denotes the volume contained in the calibrated vessel, the ware is marked “TC”. When the graduation line indicates the volume delivered from the vessel, the ware is marked “TD”.
a cylinder is filled with air its radius is 6.00 cm and its height is 3.50 cm what is the volume of air
Answer:
395.84cm^3
Explanation:
volume of a cylinder:
V=π(r^2)h
V = π((6cm)^2)(3.50cm) = 395.84cm^3
7. Experimental value of acceleration due to gravity is found to be
9.842 m/s². The accepted value of acceleration due to gravity is
9.81 m/s2. What is the percent error in calculation?
a 0.326 %
b 0.316 %
C 0.981 %
d 0.613 %
Answer : The correct option is, (a) 0.326 %
Explanation :
To calculate the percentage error, we use the equation:
[tex]\%\text{ error}=\frac{|\text{ Experimental value - Accepted value}|}{\text{ Accepted value}}\times 100[/tex]
We are given:
Experimental value = 9.842 m/s²
Accepted value = 9.81 m/s²
Now put all the given values in above equation, we get:
[tex]\%\text{ error}=\frac{|9.842 m/s^2- 9.81m/s^2|}{9.81m/s^2}\times 100[/tex]
[tex]\%\text{ error}=0.326\%[/tex]
Therefore, the percent error in calculation is 0.326 %
What are the different forms of energy involved in stretching and releasing a rubber band? What other processes are similar?
Answer:
the answer is elastic potential energy to kinetic energy
Explanation:
A stretched rubber band contains potential energy (specifically called elastic potential energy because the material involved is elastic), which when released, the rubber band tries to return back to it's original shape and size. During the process of this return, the elastic potential energy is immediately converted to kinetic energy.
NOTE: Potential energy can be defined as the energy stored/present in a body at rest. It is usually as a result of the body's position or state. The potential energy stored in an elastic material is called elastic potential energy.
Kinetic energy can simply be described as the energy present in an object that is in motion.
One major process that is similar to the processes above is the mechanical energy, which is the energy involved in an object that has the ability to do work which in this case is a drawn elastic rubber that has the ability to "return" to it's initial state.
Your science teacher gives you three liquids to pour into a jar. After pouring all of them into the jar, the liquids layer as seen in the image. What property of matter prevents the three liquids from mixing together?
Answer:
density
Explanation:
The value of the equilibrium constant for a reaction is 2.65 x 10-6 at 35° Calculate the value of LaTeX: \DeltaΔG°rxn.
Answer:
234
Explanation: