Answer:
Explanation:
We can conclude that the forces of the two teams are equal and opposite and hence they cancel each other. Therefore none of the teams won as the rope did not move.
hope this helps
plz mark as brainliest!!!!!!!
A fan rotating with an initial angular velocity of 1500 rev/min is switched off. In 2.5 seconds, the angular velocity decreases to 400 rev/min. Assuming the angular acceleration is constant, answer the following questions.
How many revolutions does the blade undergo during this time?
A) 10
B) 20
C) 100
D) 125
E) 1200
Answer:
The blade undergoes 40 revolutions, so neither of the given options is correct!
Explanation:
The revolutions can be found using the following equation:
[tex]\theta_{f} = \theta_{i} + \omega_{i}*t + \frac{1}{2}\alpha*t^{2}[/tex]
Where:
α is the angular acceleration
t is the time = 2.5 s
[tex]\omega_{i}[/tex] is the initial angular velocity = 1500 rev/min
First, we need to find the angular acceleration:
[tex] \alpha = \frac{\omega_{f} - \omega_{i}}{t} = \frac{400 rev/min*2\pi rad*1 min/60 s - 1500 rev/min *2\pi rad*1 min/60 s}{2.5 s} = -46.08 rad/s^{2} [/tex]
Now, the revolutions that the blade undergo are:
[tex]\theta_{f} - \theta_{i} = \omega_{i}*t + \frac{1}{2}\alpha*t^{2}[/tex]
[tex]\Delta \theta = 1500 rev/min *2\pi rad*1 min/60 s*2.5 s - \frac{1}{2}*(46.08 rad/s^{2})*(2.5)^{2} = 248.7 rad = 39.9 rev[/tex]
Therefore, the blade undergoes 40 revolutions, so neither of the given options is correct!
I hope it helps you!
A fireworks rocket is launched vertically upward at 40 m/s. At the peak of its trajectory, it explodes into two equal-mass fragments. One reaches the ground t1 = 2.71s after the explosion.When does the second reach the ground?t=?
Answer:
6.13 seconds
Explanation:
At the peak of the fireworks trajectory, the velocity of the firework would be zero. Using equation of motion, we have:
v² = u² + 2gh
0 = 40² - (2)(9.81)(h)
0 = 1600 - 19.62h
19.62h = 1600
h = 1600/19.62
h = 81.55 m
Now during the process of explosion, the two parts gained equal vertical momentum but in opposite directions.
We are told the first piece lands in a time of 2.71 s,
Using 3rd equation of motion, we have;
h = ut + ½gt²
81.55 = u(2.71) + ½(9.81 × 2.71²)
81.55 = 2.71u + 36.0228
2.71u = 81.55 - 36.0228
2.71u = 45.5272
u = 45.5272/2.71
u = 16.8 m/s
The time it takes a projectile to return back to its original launch point assuming the projectile was launched
vertically with speed u = 16.8 m/s is;
t = 2u/g
t = (2 × 16.8)/9.81
t = 3.43 s
Thus total time it takes the second mass to reach the ground = 3.43 + 2.71 = 6.13 seconds
Explain how blood circulation takes place in humans?
Blood comes into the right atrium from the body, moves into the right ventricle and is pushed into the pulmonary arteries in the lungs. After picking up oxygen, the blood travels back to the heart through the pulmonary veins into the left atrium, to the left ventricle and out to the body's tissues through the aorta.
Hope it helps you
Mark my answer as brainlist
have a nice day
Explain why the two plates of a capacitor are charged to the same magnitude when a battery is connected to the capacitor.
Answer:
This is because the same electron removed from the positively charged plate is what is taken to the negatively charged plate, maintaining the same amount of electron according to the conservation of charge in an electric circuit.
Explanation:
In any circuit, electrons are neither created nor destroyed according to the laws of conservation of charge, but are transferred from one point to another on the circuit. When the plates of a capacitor are connected to battery, the battery pushes the electron to move due to its potential difference. Electrons are then moved from the positive plate, at a steady rate, to the negative plate. The removal of electrons from the positive plate is what leaves it positively charged from deficiency of electrons, and the addition of electrons at the negatively charged plate is what leaves the plate negatively charge from excess of electrons. From this, we can see that the same electrons removed from the positively charged plate are taken to the negatively charged plate.
) Calculate current passing in an electrical circuit if you know that the voltage is 8 volts and the resistance is 10 ohms
Explanation:
Hey, there!
Here, In question given that,
potential difference (V)= 8V
resistance (R)= 10 ohm
Now,
According to the Ohm's law,
V= R×I { where I = current}
or, I = V/R
or, I = 8/10
Therefore, current is 4/5 A or 0.8 A.
(A= ampere = unit of current).
Hope it helps...
"How many wavelengths wide must a single slit be if, at a point 8o from the central maximum, there is a 72 rad phase difference between the top and bottom rays?"
Answer
82.3 wavelengths
The Milky Way has a diameter (proper length) of about 1.2×105 light-years. According to an astronaut, how many years would it take to cross the Milky Way if the speed of the spacecraft is 0.890 c?
Answer:
t = 134834.31 years
Explanation:
First we find the speed of the ship:
v = 0.890 c
where,
v = speed of the ship = ?
c = speed of light = 3 x 10⁸ m/s
Therefore, using the values, we get:
v = (0.89)(3 x 10⁸ m/s)
v = 2.67 x 10⁸ m/s
Now, we find the distance in meters:
Distance = s = (1.2 x 10⁵ light years)(9.461 x 10¹⁵/1 light year)
s = 11.35 x 10²⁰ m
Now, for the time we use the following equation:
s = vt
t = s/v
t = (11.35 x 10²⁰ m)/(2.67 x 10⁸ m/s)
t = (4.25 x 10¹² s)(1 h/3600 s)(1 day/24 h)(1 year/365 days)
t = 134834.31 years
Parallel light rays with a wavelength of 563 nm fall on a single slit. On a screen 3.30 m away, the distance between the first dark fringes on either side of the central maximum is 4.70 mm . Part A What is the width of the slit
Answer:
The width of the slit is 0.4 mm (0.00040 m).
Explanation:
From the Young's interference expression, we have;
(λ ÷ d) = (Δy ÷ D)
where λ is the wavelength of the light, D is the distance of the slit to the screen, d is the width of slit and Δy is the fringe separation.
Thus,
d = (Dλ) ÷ Δy
D = 3.30 m, Δy = 4.7 mm (0.0047 m) and λ = 563 nm (563 ×[tex]10^{-9}[/tex] m)
d = (3.30 × 563 ×[tex]10^{-9}[/tex] ) ÷ (0.0047)
= 1.8579 × [tex]10^{-6}[/tex] ÷ 0.0047
= 0.0003951 m
d = 0.00040 m
The width of the slit is 0.4 mm (0.00040 m).
Open the sash half way up, take the beaker containing the dry ice / water out of the hood, and slowly move it from right in front of the hood all the way down to the floor. At what point do the fumes stop getting sucked up by the fume hood?
Answer:
The fumes stop getting sucked up by the fume hood once the beaker is pulled out of the hood.
Suppose you observed the equation for a traveling wave to be y(x, t) = A cos(kx − ????t), where its amplitude of oscillations was 0.15 m, its wavelength was two meters, and the period was 2/15 s. If a point on the wave at a specific time has a displacement of 0.12 m, what is the transverse speed of that point?
Answer:
15m/sExplanation:
The equation for a traveling wave as expressed as y(x, t) = A cos(kx − [tex]\omega[/tex]t) where An is the amplitude f oscillation, [tex]\omega[/tex] is the angular velocity and x is the horizontal displacement and y is the vertical displacement.
From the formula; [tex]k =\frac{2\pi x}{\lambda} \ and \ \omega = 2 \pi f[/tex] where;
[tex]\lambda \ is\ the \ wavelength \ and\ f \ is\ the\ frequency[/tex]
Before we can get the transverse speed, we need to get the frequency and the wavelength.
frequency = 1/period
Given period = 2/15 s
Frequency = [tex]\frac{1}{(2/15)}[/tex]
frequency = 1 * 15/2
frequency f = 15/2 Hertz
Given wavelength [tex]\lambda[/tex] = 2m
Transverse speed [tex]v = f \lambda[/tex]
[tex]v = 15/2 * 2\\\\v = 30/2\\\\v = 15m/s[/tex]
Hence, the transverse speed at that point is 15m/s
1. Why do only some people get addicted to
drugs?
Answer:
When drugs are taken in are body are brain release dopamine: which make us feel so pleasure and good, and for this some people are addicted to drugs which makes them feel good. on other hand damaging their health.
A 6.7 cm diameter circular loop of wire is in a 1.27 T magnetic field. The loop is removed from the field in 0.16 ss . Assume that the loop is perpendicular to the magnetic field.
Required:
What is the average induced emf?
Answer:
The induced emf is [tex]\epsilon = 0.0280 \ V[/tex]
Explanation:
From the question we are told
The diameter of the loop is [tex]d = 6.7 cm = 0.067 \ m[/tex]
The magnetic field is [tex]B = 1.27 \ T[/tex]
The time taken is [tex]dt = 0.16 \ s[/tex]
Generally the induced emf is mathematically represented as
[tex]\epsilon = - N * \frac{\Delta \phi}{dt}[/tex]
Where N = 1 given that it is only a circular loop
[tex]\Delta \phi = \Delta B * A[/tex]
Where [tex]\Delta B = B_f - B_i[/tex]
where [tex]B_i[/tex] is 1.27 T given that the loop of wire was initially in the magnetic field
and [tex]B_f[/tex] is 0 T given that the loop was removed from the magnetic field
Now the area of the of the loop is evaluated as
[tex]A = \pi r^2[/tex]
Where r is the radius which is mathematically represented as
[tex]r = \frac{d}{2}[/tex]
substituting values
[tex]r = \frac{0.067}{2}[/tex]
[tex]r = 0.0335 \ m[/tex]
So
[tex]A = 3.142 * (0.0335)^2[/tex]
[tex]A = 0.00353 \ m^2[/tex]
So
[tex]\Delta \phi = (0- 127)* (0.00353)[/tex]
[tex]\Delta \phi = -0.00448 Weber[/tex]
=> [tex]\epsilon = - 1 * \frac{-0.00448}{0.16}[/tex]
=> [tex]\epsilon = 0.0280 \ V[/tex]
What is the force that attracts objects with mass toward each other?
Explanation:
gravitional force attracts objects with mass toward each other.
12. A concave lens has a focal length of 10 cm. An object 2.5 cm high is placed 30 cm from the lens. Determine the position and size of the image. (3)
Answer:
I think 9.5
Explanation:
............
Peer assessment is a unique educational model. Think back to how you felt about peer assessment at the beginning of the term, and compare that to your feeling now. How have your feeling changed? Are you more comfortable with peer assessment? Have you learned something new while assessing your peer's work?
Answer:
In the beginning, I was not familiar to assess assessments of the other students. Ifelt a little bit weird that is it possible to check assignments while having an instructor.I was also a bit frustrated, to be honest, that why do we have to assess thoseassessments. It was kind of extra burden for me. But after few weeks assessingmore assignments, my feeling had changed because I was learning lots of thingsthat were changing my perspectives. I was gaining extra knowledge from my peersin the form of assessments. Yes, I am comfortable with assessing assessments,because I got to learn many vocabularies and making structures of the sentencecorrectly by improving grammatically as I am not a native English speaker. Thus, inthis way, I was learning something new in each and every assessment.
5. The speed of a transverse wave on a string is 170 m/s when the string tension is 120 ????. To what value must the tension be changed to raise the wave speed to 180 m/s?
Answer:
The tension on string when the speed was raised is 134.53 N
Explanation:
Given;
Tension on the string, T = 120 N
initial speed of the transverse wave, v₁ = 170 m/s
final speed of the transverse wave, v₂ = 180 m/s
The speed of the wave is given as;
[tex]v = \sqrt{\frac{T}{\mu} }[/tex]
where;
μ is mass per unit length
[tex]v^2 = \frac{T}{\mu} \\\\\mu = \frac{T}{v^2} \\\\\frac{T_1}{v_1^2} = \frac{T_2}{v_2^2}[/tex]
The final tension T₂ will be calculated as;
[tex]T_2 = \frac{T_1 v_2^2}{v_1^2} \\\\T_2 = \frac{120*180^2}{170^2} \\\\T_2 = 134.53 \ N[/tex]
Therefore, the tension on string when the speed was raised is 134.53 N
(4) Use the preliminary observations to answer these questions; Compared to no polarizer or analyzer in the optical path, by what percent does the light intensity decrease when (a) The polarizer is introduced into the optical path? (b) The both polarizer and analyzer are introduced into the optical path?
Answer:
a) I = I₀/2, b) I = I₀/2 cos² θ
Explanation:
To answer these questions, let's analyze a little the way of working of a polarized
* When a non-polarized light hits a polarizer, the electric field that is not in the direction of the polarizer is absorbed, so the transmitted light is
i = I₀ / 2
and is polarized in the direction of the polarizer
* when a polarized light reaches the analyzer it must comply with Malus's law
I = I₁ cos² θ
where the angle is between the polarized light and the analyzer.
With this, let's answer the questions
a) When a polarizer is placed in the non-polarized light path, half of it is absorbed and only the light that has polarization in the direction of the polarizer is transmitted with an intensity of
I = I₀/2
b) when a polarizer and an analyzer are fitted, the intensity of the light transmitted by the analyzer is
I = I₀/2 cos² θ
where the final value depends on the angle between the polarizer and the analyzer.
Let's look at two extreme cases
θ = 0 I = Io / 2
θ = 90º I = 0
A car travels down the road for 535 m in 17.3 s. What is the velocity of the car in m/s and in km/h?
Answer:
30.92m/sExplanation:
[tex]Distance = 535m\\Time = 17.3s\\\\Velocity = \frac{Distane}{Time} \\\\V = \frac{535m}{17.3s} \\\\Velocity = 30.92m/s[/tex]
[tex]Distance = 535m\\\\535m \:to \: km=0.535km\\\\Time = 17.3s\\\\17.3s = 0.004805556hours\\\\Velocity = \frac{Distance}{Time}\\\\ V= \frac{0.535}{0.004805556} \\\\ V=111.329469472\\\\=111.33km/h[/tex]
g To decrease the intensity of the sound you are hearing from your speaker system by a factor of 36, you can
Answer:
Increase the distance by a factor of 6.
Explanation:
The intensity at a distance r is given by :
[tex]I=\dfrac{P}{4\pi r^2}[/tex]
Here,
P is power emitted
r is distance from source
It means that the intensity is inversely proportional to the distance from the source.
To decrease the intensity of the sound you are hearing from your speaker system by a factor of 36, we can increase the distance by a factor of 6. Hence, this is the required solution.
Snell's Law: Light goes from material having a refractive index of n 1 into a material with refractive index n 2. If the refracted light is bent away from the normal, what can you conclude about the indices of refraction
Answer:
a) the light is close to normal therefore the reference incidence of medium 1 is less than medium n2 where the ray is transmitted.
b) The ray is far from normal in this case the refractive index of medium 1 is greater than index of medium 2
Explanation:
The expression for the angle of refraction is
n₁ sin θ₁ = n₂ sin θ₂
refractive index n₁ is for incident light and n₂ is for transmitted light.
We have two cases
a) the light is close to normal therefore the reference incidence of medium 1 is less than medium n2 where the ray is transmitted.
b) The ray is far from normal in this case the refractive index of medium 1 is greater than index of medium 2
A flatbed truck is supported by its four drive wheels, and is moving with an acceleration of 7.4 m/s2. For what value of the coefficient of static friction between the truck bed and a cabinet will the cabinet slip along the bed surface?
Answer:
The value is [tex]\mu = 0.76[/tex]
Explanation:
From the question we are told that
The acceleration is [tex]a = 7.4 \ m /s^2[/tex]
Generally the force by which the truck bed (truck) is moving with is mathematically represented as
[tex]F = ma[/tex]
Now for the truck cabinet to slip from the truck bed then the frictional force between the truck cabinet is equal the force by which the the truck bed is moving with that is
[tex]F_f = F[/tex]
Here [tex]F_f[/tex] is the frictional force which is mathematically represented as
[tex]F_f = \mu * m * g[/tex]
substituting into above equation
[tex]\mu * m * g = ma[/tex]
=> [tex]\mu = \frac{a}{g}[/tex]
substituting values
[tex]\mu = \frac{ 7.4 }{ 9.8}[/tex]
[tex]\mu = 0.76[/tex]
How to do this question
Answer:
(a) 10 m/s
(b) 22.4 m/s
Explanation:
(a) Draw a free body diagram of the car when it is at the top of the loop. There are two forces: weight force mg pulling down, and normal force N pushing down.
Sum of forces in the centripetal direction (towards the center):
∑F = ma
mg + N = mv²/r
At minimum speed, the normal force is 0.
mg = mv²/r
g = v²/r
v = √(gr)
v = √(10 m/s² × 10.0 m)
v = 10 m/s
(b) Energy is conserved.
Initial kinetic energy + initial potential energy = final kinetic energy
½ mv₀² + mgh = ½ mv²
v₀² + 2gh = v²
(10 m/s)² + 2 (10 m/s²) (20.0 m) = v²
v = 22.4 m/s
g When a high-energy proton or pion traveling near the speed of light collides with a nucleus, it may travel 3.2 10-15 m before interacting. From this information, find the time interval required for the strong interaction to occur.
Answer:
Time, [tex]t=1.07\times 10^{-23}\ s[/tex]
Explanation:
Given that,
When a high-energy proton or pion traveling near the speed of light collides with a nucleus, it may travel [tex]3.2\times 10^{-15}\ m[/tex] before interacting.
Let t is the time interval required for the strong interaction to occur. It will move with the speed of light. So,
[tex]t=\dfrac{d}{c}\\\\t=\dfrac{3.2\times 10^{-15}}{3\times 10^8}\\\\t=1.07\times 10^{-23}\ s[/tex]
So, the time interval is [tex]1.07\times 10^{-23}\ s[/tex]
An emf is induced in response to a change in magnetic field inside a loop of wire. Which of the following changes would increase the magnitude of the induced emf? A. Straighten the wire out to be flat B. Reduce the resistance of the wire of which the loop is made C. Turning the plane of the loop to be parallel to the magnetic field D. Reducing the diameter of the loop
Answer:
changing the magnetic field more rapidly
Explanation:
According to Faraday's law, whenever there is a change in the magnetic lines of force, it leads the production of induced emf. The magnitude of induced emf is proportional to to the rate of change of flux.
Hence if the magnetic field inside a loop of wire is changed rapidly, the magnitude of induced emf increases in accordance with Faraday's law of electromagnetic induction stated above when the magnetic field is changed more rapidly, hence the answer.
A uniform bar has two small balls glued to its ends. The bar is 2.10 m long and with mass 3.70 kg , while the balls each have mass 0.700 kg and can be treated as point masses.
Required:
Find the moment of inertia of this combination about an axis
a. perpendicular to the bar through its center.
b. perpendicular to the bar through one of the balls.
c. parallel to the bar through both balls.
d. parallel to the bar and 0.500 m from it.
Answer:
Explanation:
a )
moment of inertia in the first case will be sum of moment of inertia of two balls + moment of inertia of bar
= 2 x .700 x (2.1 / 2 )² + 3.7 x 2.1² / 12
= 1.5435 + 1.35975
= 2.90325 kg m²
b )
moment of inertia required
= moment of inertia of bar + moment of inertia of the other ball
= 3.70 x (2.1² / 3 ) + .7 x 2.1²
= 5.439 + 3.087
= 8.526 kg m²
c )
In this case moment of inertia of the combination = 0 as distance of masses from given axis is zero .
d )
masses = 3.7 + .7 = 4.4 kg
distance from axis = .5 m
moment of inertia about given axis
= 4.4 x .5²
= 1.1 kg m².
2. The nuclear model of the atom held that
a. electrons were randomly spread through "a sphere of uniform positive
electrification."
b. matter was made of tiny electrically charged particles that were smaller than the
atom
C. matter was made of tiny, indivisible particles.
d. the atom had a dense, positively charged nucleus.
Answer:
the atom had a dense, positively charged nucleus.
Explanation:
Ernest Rutherford, based on the experiment carried out by two of his graduate students, established the authenticity of the nuclear model of the atom.
According to the nuclear model, an atom is made up of a dense positive core called the nucleus. Electrons are found to move round this nucleus in orbits. This is akin to the movement of the planets round the sun in the solar system.
A sample of gas is enclosed in a container of fixed volume. Identify which of the following statements are true. Check all that apply.If the container is heated, the gas particles will lose kinetic energy and temperature will increase.
Answer:
B. If the container is cooled, the gas particles will lose kinetic energy and temperature will decrease.
C. If the gas particles move more quickly, they will collide more frequently with the walls of the container and pressure will increase.
E. If the gas particles move more quickly, they will collide with the walls of the container more often and with more force, and pressure will increase.
#FreeMelvin
At what temperature (degrees Fahrenheit) is the Fahrenheit scale reading equal to:_____
(a) 3 times that of the Celsius and
(b) 1/5 times that of the Celsius
Answer:
C = 26.67° and F = 80°C = -20° and F = -4°Explanation:
Find:
3 times that of the Celsius and 1/5 times that of the CelsiusComputation:
F = (9/5)C + 32
3 times that of the Celsius
If C = x
So F = 3x
So,
3x = (9/5)x + 32
15x = 9x +160
6x = 160
x = 26.67
So, C = 26.67° and F = 80°
1/5 times that of the Celsius
If C = x
So F = x/5
So,
x/5 = (9/5)x + 32
x = 9x + 160
x = -20
So, C = -20° and F = -4°
for an answer to be complete,the units needs to be specified.why
Explanation:
unit is necessary to communicate values of the physical quantity for example can main to someone a particular length without using some sort of unit is impossible because a length cannot be described without a reference used to make sense of the value given
You measure the power delivered by a battery to be 4.26 W when it is connected in series with two equal resistors. How much power will the same battery deliver if the resistors are now connected in parallel across it
Answer:
The power delivered by the battery is 17.04 W
Explanation:
Power through a circuit is given as
P = IV ....1
where P is the power
I is the current through the circuit
V is the voltage through the circuit
The voltage in a circuit is given as
V = IR ....2
Let us take the value of each resistor as equal to R
when connected in series, the total resistance will be
[tex]R_{t}[/tex] = R + R = 2R
If we assume constant voltage through the circuit, then from equation 2, the current in this case is
I = V/2R
If the resistors are connected in parallel, then the total resistance will be
[tex]\frac{1}{R_{t} }[/tex] = [tex]\frac{1}{R}[/tex] +
[tex]R_{t}[/tex] = R/2
The current in this case will be increased since the resistance is reduced
I = 2V/R
comparing the two situations, we can see that the current increased when connected in parallel to a ratio of
[tex]\frac{2V}{R}[/tex] ÷ [tex]\frac{V}{2R}[/tex] =
This means that the current increased 4 times
From equation 1, we can see that electrical power is proportional to the current at a constant voltage, therefore, the power will also increase by four times to
P = 4 x 4.26 = 17.04 W