Density of a piece of ebony wood is 1. 174 g/ml. What is the volume in quarts of a 2. 1549 lb piece of this ebony wood?

When two aqueous solutions of ionic compounds reacts, the most common reaction that happens will be a double displacement reaction.

Double displacement reaction occurs when the anions and cations are exchanged between the reactants. It can be depicted through this equation.

     A⁺ X⁻ + B⁺Y⁻ → A⁺Y⁻ + B⁺X⁻

Here the anions and cations are swapped with each other.

Double displacement reactions occurs in two types.

Neutralization reactions : Here an acid and base reacts with each other, to produce salt and water.

Eg : H⁺Cl⁻ + Na⁺OH⁻  ⇒ Na⁺Cl⁻ + H⁺OH⁻

Precipitation reactions : Two aqueous solution of reagents reacts to form a insoluble product, which precipitates.

Eg : Ag⁺(NO₃)²⁻ + Na⁺Cl⁻ ⇒  Ag⁺Cl⁻  + Na⁺(NO₃)²⁻

In this reaction silver chloride precipitates and called precipitate. The solution part is the supernatant.

So when ionic compounds reacts, usually double displacement reaction occurs.

To know more about double displacement reactions, kindly refer

https://brainly.com/question/29307794

#SPJ4

As this reaction takes place at higher temperatures, it is observed that the equilibrium shifts toward the products. The reaction is an endothermic reaction.

The term endothermic reaction defined as when the reactants take in heat energy from their environment to create products. These reactions produce a cooling effect by bringing the temperature of the space around them down.

Heat is released during an exothermic reaction, raising the temperature of the immediate environment. The environment is cooled through an endothermic process that absorbs heat.

Thus, As this reaction takes place at higher temperatures, it is observed that the equilibrium shifts toward the products. The reaction is an endothermic reaction.

To learn more about an endothermic reaction, follow the link;

https://brainly.com/question/10373907

#SPJ1

0.12 g of Fe metal is plated out if the efficiency is 90% in the electrolysis.

Electrolysis is a process in which electrons are forced through a chemical cell causing a chemical reaction. It is the study of chemical processes that cause electrons to move. This movement of electrons is called electricity which can be generated by movements of electrons from one element to another in a reaction. This reaction is known as an oxidation-reduction reaction.

If an electrolysis cell with [tex]Fe(NO_{3}) _{3}[/tex] solution is operated for 2.0 hours at a constant current of 0.10 A then,

=  0.10 (C / sec) × 2 × 3600sec

= 720C.

Efficiency = 720C. 1M / 96485C. 1mol Fe/ 3M . 55.8gFe / 1molFe . 0.90

                = 0.12g of Fe.

To learn more about Electrolysis please visit:

https://brainly.com/question/12994141

#SPJ4

Discomfort due to the regurgitation of stomach acid is Gastroesophageal reflux disease (GERD).

Gastroesophageal reflux disease (GERD) is a very common condition that makes the stomach ingredients directing backward of stomach into the esophagus or food pipe. in general , Food travels from your mouth to the stomach through your esophagus while GERD irritate these passages food pipe and results in heartburn and other related symptoms.

So, Acid reflux is also termed  as gastroesophageal reflux (GER),that is a backward flow of stomach acid into the tube that connects your throat to your stomach (esophagus) as a result in acid reflux, you notice or feel a burning sensation in your chest.

To learn more about Gastroesophageal reflux disease (GERD) , here

brainly.com/question/29520560

#SPJ4

The notation axq represents an ion with an atomic mass (A) of 80 and 45 neutrons (x).

The charge (q) on the ion is determined by the number of protons and electrons in the atom. Since the atomic mass is 80, the number of protons must be

80 - 45 = 35.

The number of electrons is equal to the number of protons, so the charge on the ion must be 35 - 35 = 0. Therefore, the notation for the ion formed from an atom with a mass number of 80 and 45 neutrons is 80x0.

Learn more about atoms:

https://brainly.com/question/1494948

#SPJ4

There are 6.022 × 10²³ atoms present in 1 mole of sulfur.

According to Avogadro’s law, "under the same conditions of temperature and pressure, equal volumes of different gases contain an equal number of molecules." This law is valid for real gases at high temperature and  low pressure.

This relation can be derived from the kinetic theory of gases for the assumption of a perfect or ideal gas.

Therefore 1 mole of any substance is equal to 6.022 × 10²³ atoms , molecules of ions present in it.

6.022 × 10²³ is known as Avogadro's number.

The atomic weight of sulfur is 16g.

So, molar mass of sulfur atom is 16g/mol. Therefore, 1 mole of atomic sulfur, i.e 16g/mol sulfur will contain 6.022 × 10²³ atoms of sulfur.

To know more about mole here

https://brainly.in/question/39503530

#SPJ4

The h−c−h bond angle in etheene is approximately 120°.

Bond is a debt security issued by a government or corporation. It is a loan that the issuer agrees to repay to the bondholder with interest at specified intervals. Bonds are typically issued with maturity dates of one year or more, although some bonds mature in as little as six months. Bondholders receive regular interest payments until the bond matures. At that point, the issuer pays back the principal amount of the bond.

This is because ethene is a planar molecule with two double bonds, so the two carbon atoms are sp2 hybridized and the two hydrogen atoms are sp3 hybridized. This creates a trigonal planar geometry, with one double bond and one single bond, resulting in an h−c−h bond angle of 120°.

To learn more about bond
https://brainly.com/question/29794367
#SPJ4

The height will be 0.3278meters or 31.78 cm.

According to the principle of buoyancy, the weight of a floating body is equals to the weight of the liquid displaced by its submerged part. Therefore, the ship can float over water. Because its weight will be equal to the weight of the water which you are trying to displace. Each float will displaces the swimming liquid by its own weight.

The weight of the container must be equal to the weight of the volume of water which will displaced by the container. Displacement is the amount of water a ship will displaces. If the buoyancy is equals to the object's weight, then the object will remain buoyant at the current depth. Buoyancy always exists whether an object is submerged, or floating in a liquid. When the boat will floats, its weight is equals to the weight of the volume of water will displaced.

To know more about height here

https://brainly.com/question/21982748

#SPJ4

Ionic bonds is also called electrovalent bonds because the bond is made between the atoms with opposite charges and the forces acting between them is electrovalent force. Ionic bonds of oxygen and potassium is that they transfer two electrons per atom between them to make an ionic bond.

Ionic bond is the force that is generated between the two charged species and it is particular that one has excess of electrons and the other one has loss of electrons so that they can generate opposite charges between them in order to attract them to each other. this is the strongest force between the atoms. ionic bonds have the most attractive force in the atom and the most strong it. by this primary information, we can firmly consider that ionic  bonds are called electrovalent bonds because the bond is made between the atoms with opposite charges and ionic bonds of oxygen and potassium is that they transfer two electrons per atom between them to make an ionic bond.

Learn more about Ionic Bonds:

brainly.com/question/11527546

#SPJ4

Metallic minerals are often found near previously or currently active convergent plate boundaries because of the process of subduction.

Subduction occurs when one tectonic plate moves under another and sinks into the Earth's mantle. As the plate sinks, it melts and the molten materials that are created can rise to the surface and cool, forming new crust and the metallic minerals that are commonly associated with this process, such as copper, gold, and silver. This is known as a mineral deposit generated by fluid transport and is one of the pieces of evidence that support that metallic minerals are frequently found near previously or currently active convergent plate boundaries.

To know more about tectonic plate, visit:

https://brainly.com/question/19317822

#SPJ1

If the plate had been developed with 5% ethyl acetate in hexanes, it would likely have different solvent properties compared to the original plate development process.

Ethyl acetate is a polar solvent, while hexanes are nonpolar, so the addition of ethyl acetate to the hexanes would likely result in a more polar solvent system.

This could affect the solubility and migration of the compounds on the plate, potentially leading to different separation patterns and band intensities.

It is also possible that the 5% ethyl acetate in hexane solution may lead to better separation of the compounds on the plate, as the polar and nonpolar properties of the solvents may work together to enhance the separation.

However, it would depend on the types of compounds present on the plate and their individual solubility properties.

In conclusion, the plate developed with 5% ethyl acetate in hexanes may have different solvent properties and may lead to different separation patterns and band intensities, but it is not possible to determine the exact result without further experimentation and analysis of the specific compounds present on the plate.

Learn more about solvents at

https://brainly.com/question/14797683

#SPJ4

Yes, the energy is released when ATP is hydrolyzed, basically it results in the release of very high amount of energy.

Specifically, the hydrolysis of ATP results in the release of free energy in the form of a high energy phosphate bond, which can then be used to drive cellular processes. ATP (adenosine triphosphate) is a molecule that stores and transports chemical energy within cells. It is often referred to as the "molecular currency" of energy transfer because it is so widely used in cellular metabolism. ATP consists of an adenine molecule, a sugar molecule (ribose), and three phosphate groups. The energy stored in ATP is primarily in the bonds between the phosphate groups. When ATP is hydrolyzed (broken down by the addition of water), one of the phosphate groups is removed, releasing energy and forming ADP (adenosine diphosphate) and a free phosphate molecule. This process is exothermic, meaning it releases energy in the form of heat.

To know more about energy please refer: https://brainly.com/question/9558735

#SPJ4

The force of attraction between two helium atoms is so weak that at a temperature of only 4.2 K they have sufficient kinetic energy to overcome the forces of attraction between them and escape into the gas phase.

Forces of attraction  is a force by which atoms in a molecule  combine. it is basically an attractive force in nature.  It can act between an ion and an atom as well.It varies for different  states  of matter that is solids, liquids and gases.

The forces of attraction are maximum in solids as  the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.

Learn more about forces of attraction,here:

https://brainly.com/question/2122941

#SPJ1

Option C: all of the above are false because vacancy concentration is exponentially dependent on temperature.

Temperature affects flaws that are vacant. Mathematically, the number of vacancies in a specific volume of a solid at a specific temperature can be stated as follows: At a specific temperature, [tex]N_{v}[/tex] is the total number of vacancies per unit volume of solid (vacancies/[tex]m^{3}[/tex]):

[tex]N_{v}[/tex] = exp(−ΔGv/RT)

Vacancy concentration is, thus, not independent of temperature, but rises with it. Also, it is not necessary that vacancies will only be present at high temperatures only but can also be present at relatively low temperatures so as to make the crystal in equilibrium. Hence, all of the given statements are false.

When an atom is absent from its original lattice location, a vacancy is created. As a result, vacancy results in the vacant lattice site shown below. Vacancy is a zero-dimensional flaw, just as other points of defects. The tension between the nearby atoms is caused by the vacancy defect. The vacancy defect causes the density of the crystalline solid to decrease since there are fewer atoms present.

To know more about crystalline solids, refer:

https://brainly.com/question/14101276

#SPJ4

The total number of electrons in 1.0 g of CH4 is 0.0625.

Methane is a chemical compound having chemical formula CH4 means one carbon atom bonded to the four hydrogen atoms. It is a group-14 hydride, the simplest alkane, as well as the main constituent of natural gas. Naturally occurring methane is found both below ground and under the seafloor as well as it is formed by both geological and biological processes. Molecular weight of methane will be 16.043.

1 mole of methane having 10 electrons

So, 0.0625 mole of CH4 have 10 x 0.0625 = 0.625electron

Or 0.625 x Avogadro's number

To know more about electrons here

https://brainly.com/question/28977387

#SPJ4

Answer:

false

Explanation:

Fire is not considered a hazard associated with excavations. Therefore, the given statement is false.

In fact, fire is a risk that is connected to excavations. Working with machinery, tools, and materials that might produce heat or sparks, including electrical systems or welding equipment, is a common task when excavating. These heat sources have the potential to start fires at the excavation site if sufficient safety precautions are not taken. Additionally, gas and other subterranean utility lines are susceptible to rupturing during excavations, which can result in explosive fires. Therefore, when undertaking excavations, fire safety procedures should be followed.

Therefore, the given statement is false.

To know more about excavations, here:

https://brainly.com/question/33846654

#SPJ6

The ascending material collides with the unyielding lithosphere and becomes immobile.

For more information on convection cell kindly visit to

https://brainly.com/question/906132

#SPJ1

Yes, Ca and O do form an ionic compound.

Calcium (Ca) is a metal and Oxygen (O) is a non-metal. Ca loses 2 electrons to form a cation (positively charged ion) - Ca+2 ion. Oxygen gains 2 electrons to form an anion (negatively charged ion) - O2- ion. Therefore, they cross react to form an ionic compound : CaO (Calcium oxide). In other words, calcium has 2 valence electrons in its outermost shell and has a tendency to lose them, whereas, oxygen has 6 valence electrons in its outermost shell and has a tendency to gain 2 more. Therefore, Ca forms Ca+2 by donating these 2 electrons to oxygen. Oxygen gains these 2 electrons and the compound formed is an ionic compound named CaO (Calcium oxide).

To know more about ionic bonds, click here: https://brainly.com/question/957239

#SPJ4

An oxidation-reduction process, commonly referred to as a redox reaction, is what happens when copper reacts with oxygen gas.

In this reaction, the oxygen gas (O2) acquires electrons to form negatively charged oxygen ions while the copper (Cu) loses electrons to become copper(II) oxide (CuO) (O2-). Copper and oxygen gas, when combined, form copper oxide. The reaction can be represented by the chemical equation: 2Cu + O2 -> 2CuO. This reaction typically occurs at high temperatures, such as those produced by a flame. Copper oxide is a black powder and is commonly used in ceramics and as a fungicide.

To know more about oxygen gas please refer:

https://brainly.com/question/1064242

#SPJ4

The type of reaction given H2 O2 → h2o is a : combination reaction.

When two or more compounds combine to create a single new substance, this reaction is called a combination reaction. Synthesis reactions are another name for combination reactions. A+B-->AB is the standard format for a combination reaction. Two components combining to generate a compound is an example of a combination reaction.

By counting the number of reactants and products, you can identify a combination reaction. Two reactants combine to form a single product in the given reaction. Two elements, two compounds, or a compound and an element can combine in a reaction.

To know more about combination reaction, refer

https://brainly.com/question/15092182

#SPJ4

Molecules made up of only one type of atom are called monatomic molecules.

Examples of monatomic molecules include the noble gases like helium (He), neon (Ne), argon (Ar), and so on. These molecules are composed of a single atom of the corresponding element and are chemically unreactive. They are also called diatomic molecules, meaning that they are composed of only two atoms.

Another example of a monatomic molecule is the metallic atom, which is formed when metal atoms lose one or more electrons. These neutral atoms are also called metallic atoms and have unique properties.

Monatomic molecules are not common in nature, and they are not easily formed because they lack chemical reactivity.

Learn more about monatomic molecules here:

https://brainly.com/question/3842005

#SPJ4

Answer:he balanced chemical equation is

H

2

​

SO

4

​

+2NaOH→Na

2

​

SO

4

​

+2H

2

​

O

Thus, 1 mole H

2

​

SO

4

​

 will react with 2 moles of NaOH.

The molecular weights of H

2

​

SO

4

​

 and NaOH are 98 g/mol and 40 g/mol respectively.

The mass is divided with molecular weight to obtain the number of moles.

The number of moles of H

2

​

SO

4

​

=

98

98

​

=1 mole.

The number of moles of NaOH =

40

40

​

=1 mole.

Thus 1 mole of H

2

​

SO

4

​

 and 1 mole of NaOH are present.

0.5 mole of H

2

​

SO

4

​

 will react with 1 mole of NaOH.

Thus H

2

​

SO

4

​

 is the excess reagent and NaOH is limiting reactant.

1 mole of H

2

​

SO

4

​

 will produce 1 mole of Na

2

​

SO

4

​

Hence, 0.5 mole of H

2

​

SO

4

​

 will produce 0.5 mole of Na

2

​

SO

4

​

The molecular weight of Na

2

​

SO

4

​

 is 142 g/mol.

The mass of Na

2

​

SO

4

​

 produced is 0.5×142=71 g.

Explanation:

The equilibrium potential for an ion is primarily determined by the ion's concentration gradient across the membrane, but it is also influenced by the ion's charge and the membrane's permeability to that ion. The Nernst equation, which calculates the equilibrium potential for an ion, takes into account these factors by relating the equilibrium potential to the logarithm of the ion's concentration ratio inside and outside the cell, the ion's charge, and the temperature.

In other words, the equilibrium potential for an ion will change if any of these factors change.

To learn more about equilibrium potential for an ion:

https://brainly.com/question/14970534

#SPJ4

Answer:abc

Explanation:abc

It will take approximately 24 minutes to electroplate 1.00 g of gold using a current of 1.5 A.

Electroplating is a process in which a metal coating is applied to a conductive surface by means of electrolysis. The metal to be plated (referred to as the "deposit metal") is dissolved in a solution and placed in contact with the surface to be plated (referred to as the "substrate").

An electric current is passed through the solution, causing the deposit metal to be deposited onto the substrate in the form of a thin layer.

Calculate the number of moles of gold needed:

1.00 g of gold x (1 mole / 196.967 g) = 0.005062 moles of gold

Calculate the amount of charge needed:

0.005062 moles of gold x (96,485 coulombs / mole) = 487.6 coulombs of charge

Calculate the time required:

487.6 coulombs of charge / (1.5 A x 60 sec / A) = 24 minutes

For more questions like Current click the link below:

https://brainly.com/question/29772322

#SPJ4

The electron configurations of main-group elements end in s or p.

In atomic physics and quantum chemistry, electron configuration is the distribution of electrons in atomic or molecular orbitals of an atom or molecule. The electron configuration of a neon atom, for example, is 1s2 2s2 2p6, indicating that the 1s, 2s, and 2p subshells are filled by 2, 2, and 6 electrons, respectively.

Each electron in an orbital moves independently in an average field generated by all other orbitals, according to electronic configurations. Configurations are mathematically characterised by Slater determinants or configuration state functions. According to quantum mechanics regulations, for systems with only one electron, a level of energy is linked with each electron configuration, and electrons can migrate from one configuration to another under particular conditions by emitting or absorbing a quantum of energy in the form of a photon.

To learn more about electron configurations, here

https://brainly.com/question/20985070

#SPJ4

Among the following ions the k+ ion have the largest radius.

what was radius called ?

The radius of a monatomic ion in an ionic crystal structure, denoted by the symbol rion. Although neither atoms nor ions have clear boundaries, they are regarded as if they were hard spheres with radii such that the sum of the cation and anion ionic radii yields the distance between the ions in a crystal lattice. Ionic radii are commonly expressed in picometers (pm) or angstroms (), with 1 = 100 pm. The typical range is from 31 pm (0.3) to over 200 pm (2).

The notion may be extended to solvated ions in liquid solutions by taking the solvation shell into account.

Among the following ions the k+ ion have the largest radius.

To learn more about radius follow the given link: https://brainly.com/question/9936001

#SPJ1

The identity of the unknown metal would be potassium.

At STP, 1 mole of gas = 22.4 liters of 22400 mL

Thus, 251 mL would be:  251/22400 = 0.0112 mol of gas.

X and hydrochloric acid react to produce hydrogen according to the following chemical equation:

[tex]X + 2HCl --- > XCl_2 + H_2[/tex]

The mole ratio of X and hydrogen gas is 1:1. Thus, the equivalent mole of X that reacted would be 0.0112 mol.

Recall that: mole = mass/molar mass

Molar mass = mass/mole = 0.45/0.0112 = 40.18 g/mol

In other words, the molar weight of the metal is approximately 40. The metal with a molar weight that is close to 40 is potassium. Thus, X is potassium.

More on stoichiometric problems can be found here: https://brainly.com/question/14465605

#SPJ1

A stable atom is a small, three-part subatomic particle made up of electrons, protons, and neutrons. An atom is said to be oxidized when it loses electrons, and the process of losing electrons is referred to as oxidation.

First, oxidation is defined as the addition of oxygen atoms. Let's look at an illustration of a chemical reaction that includes oxygen addition:

2Mg+O₂→2MgO

In the aforementioned reaction, magnesium and oxygen combine to generate magnesium oxide. The magnesium atom gained the oxygen atoms in this reaction.

Magnesium and oxygen are initially in their zero oxidation states. Magnesium is in the +2 oxidation state and oxygen is in the 2 oxidation state in magnesium oxide. Thus, it is evident that magnesium experiences an electron loss.

Thus, the definition of oxidation is defined as the loss of electrons when an oxygen atom is added to any atom, which results in the loss of electrons in that atom or compound.

Leran more about oxidation at https://brainly.com/question/13495616

#SPJ4

ΔG can be calculated using the expression of Gibb's free energy. Gibb's free energy is expressed as ,

            ΔG = ΔH - TΔS

The term Gibbs free energy (G) is a value that defines how spontaneous a reaction is. G with a negative value meaning the reaction is spontaneous and a positive value meaning the reaction is nonspontaneous. The G value is the combination of enthalpy (H) and entropy (S). The reaction is said to be spontaneous reaction which favors the formation of the products. Reactions which have a decrease in energy and an increase in entropy is said to be spontaneous reaction. In the Gibbs free energy, the temperature remains constant throughout the reaction and the pressure remains constant throughout the reaction.

To learn more about Gibb's free energy please visit:

https://brainly.com/question/9179942

#SPJ4