g As observed on earth, a certain type of bacteria is known to double in number every 24 hours. Two cultures of these bacteria are prepared, each consisting initially of one bacterium. One culture is left on earth and the other placed on a rocket that travels at a speed of 0.893c relative to the earth. At a time when the earthbound culture has grown to 256 bacteria, how many bacteria are in the culture on the rocket, according to an earth-based observer

Answer:

The inner and outer surfaces of a 0.5-cm thick 2-m by 2-m window glass in winter are 10°C and 3°C, respectively. If the thermal conductivity of the glass

Explanation:

Answer:

9.82 × [tex]10^{-35}[/tex] Hz

Explanation:

De Broglie equation is used to determine the wavelength of a particle (e.g electron) in motion. It is given as:

λ = [tex]\frac{h}{mv}[/tex]

where: λ is the required wavelength of the moving electron, h is the Planck's constant, m is the mass of the particle, v is its speed.

Given that: h = 6.63 ×[tex]10^{-34}[/tex] Js, m = 2.50 kg, v = 2.70 m/s, the wavelength, λ, can be determined as follows;

λ = [tex]\frac{h}{mv}[/tex]

  = [tex]\frac{6.63*10^{-34} }{2.5*2.7}[/tex]

 = [tex]\frac{6.63 * 10^{-34} }{6.75}[/tex]

 = 9.8222 × [tex]10^{-35}[/tex]

The wavelength of the object is 9.82 × [tex]10^{-35}[/tex] Hz.

Explanation:

[tex]\theta=1.22 \frac{\lambda}{D}[/tex]

And, from equation ( 2 ), we get

[tex]\theta=\frac{x}{d}[/tex]

Thus,

[tex]\frac{x}{d} &=1.22 \frac{\lambda}{D}[/tex]

[tex]D &=1.22 \frac{\lambda d}{x}[/tex]

[tex]=1.22 \frac{550 \times 10^{-9} 3.84 \times 10^{8}}{5 \times 10^{3}}[/tex]

[tex]=0.0515 \mathrm{m}[/tex]

Thus, the diameter of the telescope's mirror that would allow us to see details as small as is

Complete question:

a 2.0 kg block slides on the horizontal, frictionless surface until it counters a spring with force constant of  955 N/m. The block comes to rest after compressing the spring a distance of 4.6 cm. Find the initial speed (in m/s) of the block.

Answer:

The initial speed of the block is 1.422 m/s

Explanation:

Given;

mass of the block, m = 2.0 kg

force constant of the spring, K = 955 N/m

compression of the spring, x = 4.6 cm = 0.046 m

Apply Hook's law to determine applied force on the spring;

F = Kx

F = (955 N/m)(0.046 m)

F = 43.93 N

Apply Newton's 2nd law to determine the magnitude of deceleration of the block when it encounters the spring;

F = ma

a = F / m

a = 43.93 / 2

a = 21.965 m/s²

Apply kinematic equation to determine the initial speed of the block;

v² = u² + 2ax

where;

v is the final speed of the block = 0

u is the initial speed of the block

x is the distance traveled by the block = compression of the spring

a is the block deceleration = -21.965 m/s²

0 = u² + 2(-21.965 )(0.046)

0 = u²  - 2.021

u² =  2.021

u = √2.021

u = 1.422 m/s

Therefore, the initial speed of the block is 1.422 m/s

Answer:

Explanation:

Charge on an electron (q) = 1.6 * 10 ^ -19 C

Velocity of electron (v) = 0.3037 * 300,000,000 = 91,110,000 m/sec

We know that, Force exerted on moving particle moving through a magnetic field :

[tex]F= q * v * B ( q,v\ and\ B\ are\ mutually\ perpendicular)[/tex]

1.2498 * 10 ^ -12 = 1.6 * 10^ -19 * 91110000 * B

B =  0.08573 T

Answer:

Before the parachute opens: Immediately on leaving the aircraft, the skydiver accelerates downwards due to the force of gravity. There is no air resistance acting in the upwards direction, and there is a resultant force acting downwards. The skydiver accelerates towards the ground.

Once the parachute is opened, the air resistance overwhelms the downward force of gravity. The net force and the acceleration on the falling skydiver is upward. An upward net force on a downward falling object would cause that object to slow down. The skydiver thus slows down.

HAVE A GREAT DAY :)

Answer:

The amplitude of vibration of the spring is "24 cm"

The periodic vibrating body's motion follows a sinusoidal path. This sinusoidal path is illustrated in the attached picture.

From the picture, it can be clearly seen that the amplitude of the periodic vibration motion is the distance from its mean position to the highest point.

Since the distance of both the highest and the lowest points from the mean position is the same. Therefore, the distance between the lowest and the highest point must be equal to two times the amplitude of the wave.

Amplitude = 24 cm

Answer:

D) diffraction

Explanation:

Corona is an optical phenomenon produced by the diffraction of sunlight or moonlight, as light moves through water droplets in the atmosphere.

This phenomenon produces one or more diffuse concentric rings of light around the Sun or Moon, usually seen as colored circles.

Therefore, the explanation for these phenomena of colored concentric circles, sometimes seen with the Sun or the Moon involves diffraction.

Answer:

The  length is  [tex]l = 8.6 \ m[/tex]

Explanation:

From the question we are told that

   The frequencies of the two successive harmonics are [tex]f_1 = 220 \ Hz[/tex] ,  [tex]f_2 = 240 \ Hz[/tex]

   The speed of sound in the air is  [tex]v_s = 343 \ m/s[/tex]

Generally the frequency of a given harmonic is mathematically represented as

     [tex]f_n = \frac{n v }{2l}[/tex]

Here  n defines  the position of the harmonics

Now since the position of both harmonic is not know but we know that they successive then we can represented them mathematically as

    [tex]220 = \frac{n v}{2l}[/tex]

and  

     [tex]240 = \frac{(n+1) v}{2l}[/tex]

So

   [tex]\frac{(n + 1 ) v}{2l} - \frac{n v}{2l} = 240-220[/tex]

=>  [tex]\frac{v}{2l} = 20[/tex]

=>   [tex]l = 8.6 \ m[/tex]

Answer: d₂ = 170 mGya

Explanation:

the relationship between absonbed 'd' and exposure 'E' is given as;

D(Gv) = F . x (AS/xB)

F is a conversion coefficient depending on medium

so we can simply write

d₁/d₂ = x₁/x₂

Given that;

our x₁ = 60 mAs, x₂ = 120 mAs,  d₁ = 85 mGya, d₂ = ?

from the given formula,

d₂ = (x₂d₁ / x₁)

now we substitute

d₂ = (120 × 85) / 60

d₂ = 170 mGya

∴ if 120 mAa is used,  the new exposure will be 170 mGya

Answer:

analyze data without drawing conclusions

Explanation:

Research reports are written in order to communicate clearly, information obtained primarily from research and analysis of data.

Typical reports of scientific research endeavours are written in such a way that they convey the research process succinctly without excessive extraneous information. A report is typically made up of; summary of the contents, introduction/ background, methods, results, discussion, conclusion and recommendations.

Hence a report does not really make inferences from the research findings.

Answer

76200meters

Explanation:

we know that 1km=1000meters

to convert km into meters we we divide km by meters

=76.2/1000

=76200meters

The sign set after the slowdown of the bicycle will be positive for the position,  negative for velocity, and negative for acceleration.

The rate at which an object's position changes when observed from a specific point of view and when measured against a specific unit of time is known as its velocity.

According to Que, when a bicyclist moves in a straight line and slows down, then the velocity decrease as displacement is decreasing, and the acceleration also decreases only displacement increases.

Therefore, the sign set for the position is +ve, for velocity it is -ve, and for acceleration also -ve

To know more about Velocity:

https://brainly.com/question/19979064

#SPJ1

A biker slows down after traveling in a long, straight line at initial velocity v0. Which of the following the best \sdescribes the signs set for the initial position, initial velocity and the acceleration? Initial position Initial velocity Acceleration

A. Positive Negative Negative

B. Positive Positive Negative

C. Negative Positive Negative

D. Negative Negative Positive

E. Negative Negative Negative

Answer:

p = -q  

he distance is equal to the current distance, so the distance does not change

Explanation:

For this exercise we can solve it using the equation of the constructor

            1 / f = 1 / p + 1 / q

where f is the focal length, p the distance to the object and q the distance to the image

For a flat surface the radius is at infinity, therefore 1 / f = 0, which implies

          1 / p = - 1 / q

           p = -q

Therefore the distance is equal to the current distance, so the distance does not change

Answer:

The answer is 312.5j

Explanation:

The kinetic energy (KE):

KE=1/2*m*v^2

M= mass of the object

v= velocity of the object

We have;

m=25g

v=5m/s

KE=1/2*25g*5^2m/s

KE =312.5j

Answer:

1. Transformer 3> Transformer 1 and 2 > Transformer 4

2. Transformer 2,3,5 > Transformer 1 > Transformer 4

Explanation:

From;

Vs/Vp = Ns/Np

Where;

Vp= voltage in primary coil

Vs= voltage in secondary coil

Ns= number of turns in secondary coil

Np= number of turns in primary coil.

Vs= Ns×Vp/Np

Vs= 480 ×2000/4000

Vs= 240 V

Vs= 480 ×1000/2000

Vs=240 V

Vs= 120 × 2000/500

Vs= 480 V

Vs= 240 × 500/1000

Vs= 120 V

2. Ns/Np= Ip/Is

Is= Np×Ip/Ns

Is= 1000 × 100/2000

Is= 50 A

Is= 2000 × 100/1000

Is= 200 A

Is= 1000 × 100/500

Is= 200 A

Is= 500 × 100/2000

Is= 25 A

Is= 4000 × 100/2000

Is= 200 A

Answer:

You have not provided options but so long as the option is none of these, it's the right answer:

Electric current, Thermodynamic temperature,mass,time amount of substance,length, luminous intensity

Answer:

R = 0.992 Ω

Explanation:

En esta pregunta, dada la información que contiene, debemos calcular la resistencia de la varilla de grafito.

Matemáticamente,

Resistencia = (resistividad * longitud) / Área De la pregunta;

Resistividad = 3,5 * 10 ^ -5 Ωm

longitud = 170 cm = 1,7 m

Área = 60 mm ^ 2 = 60/1000000 = 6 * 10 ^ -5 m ^ 2

Conectando estos valores a la ecuación anterior, tenemos;

Resistencia = (3.5 * 10 ^ -5 * 1.7) / (6 * 10 ^ -5) =

(3.5 * 1.7) / 6 = 0.992 Ω

Answer:

The glove takes 1.02s to return to the pitchers hand.

Explanation:

Given;

initial velocity the pitcher's glove, u = 5 m/s

Apply kinematic equation

s = ut - ¹/₂gt²

where;

g is acceleration due to gravity = 9.8 m/s²

t is the time takes the glove to return to the pitchers hand

s is the displacement of the glove, which will be equal to zero when the glove returns to the pitchers hand. (s = 0)

0 = ut - ¹/₂gt²

ut = ¹/₂gt²

u = ¹/₂gt

gt = 2u

t = (2u) / g

t = (2 x 5) / 9.8

t = 1.02 s

Therefore, the glove takes 1.02s to return to the pitchers hand.

Answer:

[tex] \boxed{\sf Kinetic \ energy \ (KE) = 85 \ J} [/tex]

Given:

Mass (m) = 6.8 kg

Speed (v) = 5.0 m/s

To Find:

Kinetic energy (KE)

Explanation:

Formula:

[tex] \boxed{ \bold{\sf KE = \frac{1}{2} m {v}^{2} }}[/tex]

Substituting values of m & v in the equation:

[tex] \sf \implies KE = \frac{1}{2} \times 6.8 \times {5}^{2} [/tex]

[tex] \sf \implies KE = \frac{1}{ \cancel{2}} \times \cancel{2} \times 3.4 \times 25 [/tex]

[tex] \sf \implies KE =3.4 \times 25 [/tex]

[tex] \sf \implies KE = 85 \: J[/tex]

The kinetic energy of the object reported to two significant figures is: 85 Joules.

Given the following data:

To find the kinetic energy of the object:

Kinetic energy refers to an energy that is possessed by a physical object or body due to its motion.

Mathematically, kinetic energy is calculated by using the formula;

[tex]K.E = \frac{1}{2} MV^2[/tex]

Where:

Substituting the parameters into the formula, we have;

[tex]K.E = \frac{1}{2}[/tex] × [tex]6.8[/tex] × [tex]5^2[/tex]

[tex]K.E = 3.4[/tex] × [tex]25[/tex]

Kinetic energy = 85 Joules.

Therefore, the kinetic energy of the object is 85 Joules.

Read more: https://brainly.com/question/23153766

1. The ocean water collects back in the ocean.

2. Condensation is the process by which water vapor in the air is changed into liquid water. Condensation is crucial to the water cycle because it is responsible for the formation of clouds.

3. an excessive amount of water flowing from downslope along earths surface

4. A.Evaporation occurs when water is warmed by the sun.

5. The water returns into the ocean by the water cycle . It evaporates , then it condensates , then it participates ( Rains ) and then goes back into the ocean.

Hope this answer correct ✌️

Answer:

B = 1.33 10⁻⁸ T , the magnetic field must be in the y + direction

Explanation:

In an electromagnetic wave the electric and magnetic fields are in phase

         c = E / B

         B = E / c

let's calculate

          B = 4.00 / 3 10⁸

          B = 1.33 10⁻⁸ T

To determine the direction we use that the electric and magnetic fields and the speed of the wave are perpendicular.

 If the wave advances in the + Z direction and the electric field is in the + x direction, the magnetic field must be in the y + direction

Answer:

The torque decreases because as the hanging mass goes down, the moment arm about the pivot point decreases. Since the torque is directly proportional to the length of the moment arm, torque decreases.

The torque decreases because as the hanging mass goes down, the moment arm about the pivot point decreases. Since the torque is directly proportional to the length of the moment arm, torque decreases.

Atomic number of an element  is defined as total number of protons present in the nucleus,  neutrons carry no net electrical charge, so it is the charge number of the nucleus.

atomic mass of an element can be defined as the atomic weight is measured total mass of an element’s atom, the total number of neutrons and protons in the nucleus of an atom.

Both Atomic mass and an atomic number of elements are closely related if  atomic number is high, then the atomic mass is also said to be high.

For more details regarding fire mass , visit

brainly.com/question/16858932

#SPJ2

Answer:

I believe the answer is A volleyball player sliding across the court while diving for the ball.

Explanation:

Kinetic friction is a body moving on the surface experiences a force in the opposite direction of its movement.

Hope this helps! （づ￣3￣）づ╭❤～

Answer:

Fad = 28.8 kN

Fbd = 16.4 kN

Fcd = 28.1 kN

Explanation:

First, find the length of each cable.

AD = √((2 m)² + (0.5 m)² + (2.5 m)²)

AD = √10.5 m

AD ≈ 3.24 m

BD = √((1.5 m)² + (1 m)² + (2.5 m)²)

BD = √9.5 m

BD ≈ 3.08 m

CD = √((1 m)² + (1 m)² + (2.5 m)²)

CD = √8.25 m

CD ≈ 2.87 m

Next, use similar triangles to find the x, y, and z components of each tension force.

Fadx = 2/3.24 Fad = 0.617 Fad

Fady = 0.5/3.24 Fad = 0.154 Fad

Fadz = 2.5/3.24 Fad = 0.772 Fad

Fbdx = 1.5/3.08 Fbd = 0.487 Fbd

Fbdy = 1/3.08 Fbd = 0.324 Fbd

Fbdz = 2.5 / 3.08 Fbd = 0.811 Fbd

Fcdx = 1/2.87 Fcd = 0.348 Fcd

Fcdy = 1/2.87 Fcd = 0.348 Fcd

Fcdz = 2.5/2.87 Fcd = 0.870 Fcd

Now sum the forces in the x, y, and z directions:

∑Fx = ma

-0.617 Fad + 0.487 Fbd + 0.348 Fcd = 0

∑Fy = ma

-0.154 Fad − 0.324 Fbd + 0.348 Fcd = 0

∑Fz = ma

60 kN − 0.772 Fad − 0.811 Fbd − 0.870 Fcd = 0

To solve this system of equations algebraically, start by subtracting the first two equations, eliminating Fcd.

-0.463 Fad + 0.811 Fbd = 0

0.811 Fbd = 0.463 Fad

Fbd = 0.571 Fad

Substitute into either of the first two equations:

-0.617 Fad + 0.487 (0.571 Fad) + 0.348 Fcd = 0

-0.617 Fad + 0.278 Fad + 0.348 Fcd = 0

-0.339 Fad + 0.348 Fcd = 0

0.348 Fcd = 0.339 Fad

Fcd = 0.975 Fad

Now substituting into the third equation:

60 kN − 0.772 Fad − 0.811 Fbd − 0.870 Fcd = 0

60 kN − 0.772 Fad − 0.811 (0.571 Fad) − 0.870 (0.975 Fad) = 0

60 kN − 0.772 Fad − 0.463 Fad − 0.849 Fad = 0

60 kN − 2.083 Fad = 0

Fad = 28.8 kN

Solving for the other two tension forces:

Fbd = 0.571 Fad = 16.4 kN

Fcd = 0.975 Fad = 28.1 kN

Answer:

Tensions of:

DA = 28.81 KN

DB = 16.45 KN

DC = 28.07 KN

Explanation:

see attached

Answer:

1.34 mm

Explanation:

A double slit experiment is conducted with a light which has a wavelength of 620 nm

The fringes are separated 2.3 mm apart

The light is changed to a wavelength length of 360 nm

Let x represent the fringe spacing as a result of the change in wavelength

Therefore,the fringe spacing can be calculated as follows

2.3mm/x= 620nm/360nm

Multiply both sides

x × 620= 2.3×360

620x= 828

x= 828/620

x= 1.34 mm

Answer:

e) west

Explanation:

According to Lorentz left hand rule, the left hand is used to represent the motion of an electron in a magnetic field. Hold out the left hand with the fingers held out parallel to the palm, and the thumb held at right angle to the other fingers. If the thumb represents the motion of the electron though the field, and the other fingers represent the direction of the field, then the palm will push in the direction of the force on the particle.

In this case, if we point the thumb to the south (towards your body), with the palm facing up, then the fingers will point west.

Answer:

The intensity of light from the first polarizer  is [tex]I_1 = 26 W/m^2[/tex]

Explanation:

  The intensity of the unpolarized light is  [tex]I_o = 52.0 \ W/m^2[/tex]

Generally the intensity of light that emerges from the first polarized light is

            [tex]I_1 = \frac{I_o}{2 }[/tex]

 substituting values

             [tex]I_1 = \frac{52. 0}{2 }[/tex]

             [tex]I_1 = 26 W/m^2[/tex]

Answer:

chk picture for eqn

Explanation: