Give 1 pH value where benzoic acid and dibromobenzene would be in different layers in an extraction. Assume that possible pH values are between 0 and 14.

Answer:

The grouping of elements in order of atomic number

Explanation:

law stating that the elements, when listed in order of their atomic numbers (originally, atomic weights), fall into recurring groups, so that elements with similar properties occur at regular intervals.

The non-renewable source of energy is all of the given options, which means option D is the correct choice.

Nonrenewable power source consist of coal, herbal gas, oil, and nuclear power. Once those assets are used up, they can't be replaced, that is a chief trouble for humanity as we're presently depending on them to deliver maximum of our power needs. Fossil fuels - coal, oil and fueloline - on the opposite hand, are non-renewable assets that take masses of hundreds of thousands of years to form. Fossil fuels, while burned to provide power, purpose dangerous greenhouse gas emissions, which include carbon dioxide.

Thus, coal, petroleum, natural gas are non-renewable sources of energy.

To learn more about non-renewable check the link below:

https://brainly.com/question/14432353

#SPJ4

Answer: It is possible that the seller's claims about the bone being a genuine dinosaur bone and being 400 million years old are true. However, without additional evidence or verification from independent scientists, it is also possible that the bone is not authentic or that the carbon dating results have been manipulated or misinterpreted. It is important to be skeptical and to conduct further research before making a decision about the authenticity of the bone. Additionally, it is important to consider the source of the bone and the seller's reputation and credentials. It would be wise to seek out additional opinions from experts in the field before making a decision about the authenticity of the bone.

Water with chemical formula H2O is formed by the combination of two hydrogen atoms and one oxygen atom. so there are total three atoms in one mole of H2O.

Water is formed by the combination of Hydrogen and Oxygen. According to the Law of Constant Proportions, the atoms present in a compound are combined in a fixed ratio to form that compound. As a compound of H2O is formed by the combination of H and O in the ratio of 2 : 1. Therefore, three atoms are there in one mole of H2O. Water is composed of the chemical elements hydrogen and oxygen. It exists in gaseous, liquid, and solid states. It is one of the most plentiful and essential of compounds. A tasteless and odorless liquid at room temperature, it has the important ability to dissolve many other substances.

To learn more about Water please visit:

https://brainly.com/question/1313076

#SPJ4

The grams of the mercury, Hg can be produced to from 3.55 moles of  Hg is 712 g.

The reaction is given below as :

2HgO  --->   2Hg + O₂

Given that :

The moles of HgO = 3.55 moles

2 moles of the HgO produces the 2 moles of Hg, Therefore the molar ratio is same : HgO : Hg = 2 : 2.

The number of moles of Hg = 3.55 mol

The number of moles = mass / molar mass

3.55 mol = mass / 200.59 g /mol

Mass = 712 g.

Thus , the mass of the Hg produces is 712 g.

To learn more about mass here

https://brainly.com/question/21684157

#SPJ4

The solution becomes a little bit more concentrated?

LiCl is exceptionally soluble in aqueous solution; this site quotes a solubility of 85 ⋅ g of salt in 100⋅mL of water at standard temperatures.

The third shell can hold 32 electrons. Within the shells, electrons are further grouped into subshells of four different types, identified as s, p, d, and f in order of increasing energy.

A negatively charged subatomic particle known as an electron can either be free or attached to an atom (not bound). One of the three main types of particles within an atom is an electron that is bonded to it; the other two are protons and neutrons. The nucleus of an atom is made up of electrons, protons, and neutrons together.

Early atomic researchers thought that electrons in an atom orbited its nucleus in spherical orbits at precise distances, much like planets orbit stars. The orbits that are farthest from the nucleus in this model—known as the Bohr model—contain the most energy. The atom emits electromagnetic radiation when an electron transitions from a higher energy orbit to a lower energy orbit. Letters are also sometimes used to refer to the shells. These include K, L, M, N, O, P and Q, again starting from the nucleus and working out. For instance, the third shell might be referred to as the M shell or 3m.

To learn more about electrons refers to;

https://brainly.com/question/14069394

#SPJ1

They are present in the food and beverages we consume, the clothes we wear, and the air we breathe. Students will get a better understanding of how matter is organized at the atomic level by learning how scientists identify pure substances from mixtures and solutions.

The characteristics of the mixture are determined by the separate elements. Physical techniques can be used to separate the components of the mixture. According on the properties of the constituents, the mixture's melting and boiling points will vary.

All substances can be classified according to their distinct combinations of physical and chemical characteristics. Physical qualities are those that can be ascertained about a substance without altering its chemical makeup.

To know more about mixtures visit :-

https://brainly.com/question/24898889

#SPJ1

An acid-base indicator is used in an experiment to determine the pH of a solution. It changes color depending on the acidity or basicity of the solution, indicating whether the solution is acidic, neutral, or basic.

An acid-base indicator is a weak acid or weak base that changes color when it is in an acidic or basic environment. In the acid form, an indicator is one color and in the base form it is another color. Indicators are useful because they allow the experimenter to easily determine the pH of a solution without the need for a pH meter.

In addition, acid-base indicators are used as a visual aid in titrations as well as to determine the endpoint of a titration. This is because the color change of the indicator corresponds to the point at which the acid and base being titrated are present in stoichiometric amounts.

Learn more about pH

brainly.com/question/28609181

#SPJ4

The combustion of hydrocarbons will produce carbon dioxide and water, such as in the burning of methane: CH4 + 2O2 → CO2 + 2H2 O.

Combustion is a high-temperature exothermic redox chemical reaction between fuel and an oxidant, generally atmospheric oxygen, that produces oxidized, gaseous products, in a mixture known as smoke.

General equation for complete combustion reaction is: Fuel + O2 → CO2 + H2O. Burning of charcoal is a combustion reaction or burning of any kind of Wood or Coal to heat your home. Examples of combustion reaction are: car and buses burn petrol or diesel to run or use of natural gas / LPG  on your stovetop.

To know more about combustion reaction, refer

https://brainly.com/question/13251946

#SPJ4

In ten seconds total of 5 waves crash onto the shore of the beach .

The distance between each wave crest on the water is 8 meters.

The distance between two wave crests, or the wave length, is the measurement of this distance.

We are aware that there are 8 metros between each wave's crest.

There are five wave crests in all, with the first and second wave crests separated by eight metros.

the second and third wave crests are separated by 8 metros.

Wave length is therefore 8 + 8 = 16 metros

wavelength:

To learn more about wavelength refers to;

https://brainly.com/question/30307819

#SPJ1

the given statement was false cause when the gas law constant R = 0. 0821 was used the temperature should be in K and the volume should be in liters.

define gas law constant ?

In chemistry and physics, "R" is the symbol for the gas constant, molar gas constant, ideal gas constant, or universal gas constant. In numerous equations, it is a proportionality factor that connects energy and temperature scales.

Chemistry's Gas Constant

The gas constant is also known as the ideal gas constant and the universal gas constant in chemistry.

The Boltzmann constant has a molar equivalent.

The gas constant has a SI value of 8.31446261815324 JK1mol1. The number is usually rounded to 8.314.

the given statement was false cause when the gas law constant R = 0. 0821 was used the temperature should be in K and the volume should be in liters.

To learn more about gas constant follow the given link: https://brainly.com/question/29034664

#SPJ1

Molecules that have more than one type of atom chemically bonded together are called polyatomic molecules or compounds.

These molecules are formed by the chemical combination of two or more elements in a fixed ratio by weight. The elements in a compound are chemically bonded together and have unique properties that are different from the properties of its individual elements. Compounds can be represented by chemical formulas, which specify the ratio of atoms of each element present in the compound. Some examples of polyatomic molecules are water (H2O), Carbon Dioxide (CO2), and Table salt (NaCl). Compounds can be inorganic or organic, and they can be simple or complex.

Learn more about compounds here:

https://brainly.com/question/13516179

#SPJ4

The valency of carbon in methane (CH₄) is Four.

Valency is simply defined and is equal to the number of electrons gained, lost or shared by an atom of an element to achieve the nearest Nobel gas configuration which is completing eight, eighteen etc. electrons in its last shell.

The number of atoms of other elements with which one atom of an element will combine is decided by the valency of that element.

In the given question, as carbon has four valence electrons in its last shell so its valency becomes four.

Similarly, If you were asked to find the valency of hydrogen in CH4 you can tell that it is one because it has one electron placed in its last shell.

Learn more about Valence electrons here:

https://brainly.com/question/12744547

#SPJ4

235.7 g of Sylvanite would be dug up to obtain 66. 0 g of gold.

As stated in the question, Sylvanite contains 28. 0 % gold by mass.

'By mass' is used to express concentration by mass percentage.

Mass percentage = (mass of component / total mass of compound) x 100

Hence, 28g of gold is present in 100g of  Sylvanite.

28g of gold -> 100g Sylvanite

1g of gold -> 100/28 g Sylvanite

66g of gold -> (100*66)/28  g Sylvanite = 235.7 g of Sylvanite.

Hence, 235.7 g of Sylvanite would be dug up to obtain 66. 0 g of gold.

To learn more about the 'mass percentage' try the:

https://brainly.com/question/4336659

#SPJ4

When the View from Earth is a new moon phase, the View from the Moon would be a full moon.

The Moon is known as the earth's only natural satellite and is the fifth largest satellite in the Solar System and the largest and most massive relative to its parent planet, with a diameter about one-quarter that of Earth.

When we see the moon as nearly full, others on another part of the earth would see a slim crescent Earth.

Whereas when we see a completely full moon, the moon, Earth and sun are said to be in a line – with Earth in the middle.

Learn more about the moon at: https://brainly.com/question/338746

#SPJ1

The mass of MgSO4, in grams, present in the solution is 240.73 g

Considering the query,

We need to figure out how much MgSO4 there is in the solution, in grammes.

First, we'll calculate how many moles of MgSO4 there are in the 1L stock solution at 2.0 M concentration.

1 L of volume

Using the equation

Number of moles = Volume * Concentration There are 2.0 1 = 2 moles of MgSO4 in the system.

There are 2 moles of MgSO4 in total.

Here is the mass of MgSO4 in grammes.

Using the equation

Molar mass is equal to the product of the number of moles.

Molar mass is equal to the product of the number of moles.

MgSO4's molar mass is 120.366 g/mol. The solution's mass of MgSO4 is equal to 2 120.366 grammes.

The amount of MgSO4 in the solution is 240.73 g.

Consequently, 240.73 grammes of MgSO4 are present in the solution.

To learn more about mole substance refers to;

https://brainly.com/question/3659332

#SPJ1

During the formation of a solution, the process of dissolving a solute in a solvent is always an exothermic process.

This is because the energy required to break down the solute's intermolecular bonds is greater than the energy released when the solute's particles are surrounded by the solvent particles. As a result, energy is released in the form of heat when the solute is dissolved in the solvent.

The heat released during a solution formation process is affected by several factors including the types of solute and solvent, the concentration of the solute, and temperature.

Learn more about exothermic process:

https://brainly.com/question/2924714

#SPJ4

The sequence in which the events are ranked in order to attain equilibrium is as follows.

Salt is first dissolved into its cations and anions by hydration of cations and anions.

In the second stage, hydrated anions and cations start to form a solid salt.

The rate of dissolution is equal to the rate of deposition in the last stage.

White dwarf star (WD) in a binary system is the initial state of the supernova. A companion star orbits the WD, and as it does so, it is accreting material onto it and creating an accretion disc.

Growing WD with accretion disc: The accretion disc expands as the partner star keeps dumping stuff onto the WD. The WD grows larger and more gigantic as a result of this.

WD at Chandrasekhar limit: When a WD hits its Chandrasekhar limit, it no longer has the ability to support any more mass without collapsing. When the WD has a mass that is around 1.4 times that of the Sun, this happens.

For more questions on cyclohexane

https://brainly.com/question/28559170

#SPJ4

S+O2 → SO2 (Sulphur dioxide) is a type of  combination reaction of various reactions defined in chemistry.

When two or more elements or compounds combine to create a single product, the reaction is termed as a direct combination reaction occurring as per the first line . Equations of the form X + Y XY are used to depict these reactions. A combination reaction occurs when two or more components combine to form a single compound.

Due to their high reactivity, oxygen and halogens are prone to combine with other elements to form new substances generally through Combination reaction.

To know more about combination reaction visit

https://brainly.com/question/3664113

#SPJ4

Option an is the proper answer. An atom of one element differs from another in terms of its number of protons. Protons and electrons coexist in nature in an equal number.

As a result, atoms have no electrical charge. How many protons are there in an atom is what makes it unique. Due to this, one element is different from another. How many protons are in an atom is known as its "atomic number." An element's properties are determined by its electron density. Each element is distinct from the others because they each have a different number of electrons. One of the parts of an atomic nucleus is a proton, which has a mass of one and a charge of one. Protons are denoted by the letters p or p +.

Learn more about atomic number here

https://brainly.com/question/16858932

#SPJ4

The molecular weight of  [tex]C{2}[/tex][tex]H_{11}[/tex][tex]O_{3}[/tex] is 83 u.

As given in the question:

the atomic mass of H = 1

the atomic mass of C = 12

the atomic mass of O= 16

To calculate the molecular mass of a molecule, multiply the subscript (number of atoms) by the atomic mass of each element in the molecule and add those masses together. Hence,

Molecular weight= (2 X 12) + (11 X 1) + (3 X 16)

                            = 24+ 11+ 48= 83 u.

Hence the molecular weight is 83 u.

To learn more about molecular mass try:

https://brainly.com/question/24191825

#SPJ4

Answer: 10 neutrons

Explanation: Fluorine-19 is composed of 9 protons, 10 neutrons, and 9 electrons. Its abundance is 100%; no other isotopes of fluorine exist in significant quantities.

✨

Option a - molecules with too little energy to react represent the unshaded area under the curves.

A molecule is a collection of chemically bonded atoms. The atoms in a molecule can be of the same element (such as diatomic oxygen, O2) or different elements (such as water, H2O). The chemical bond between the atoms can be covalent bond, in which the atoms share electrons, or ionic, in which the atoms transfer electrons.The number of molecules in a sample of a substance is known as the Avogadro's number (NA), which is a fundamental constant of nature and is approximately 6.022 x 10^23 per mole. The Avogadro's number is used to convert between the number of atoms or molecules in a sample and the amount of substance measured in moles.When it comes to energy, the total energy of a sample of a substance is typically measured in terms of its internal energy (U), which is the sum of the kinetic and potential energies of all the atoms or molecules in the sample.

Learn more about molecules here:

https://brainly.com/question/19922822

#SPJ4

the complete question is :

The following figure shows molecular energy distributions for two temperatures and the activation energy for a reaction. The un-shaded regions beneath the curves signify

A- molecules with too little energy to react. a molecular energy

B- distribution at the lower of the two temperatures shown.

C-molecules with enough energy to react. a molecular energy

D-distribution at the higher of the two temperatures shown.

The equilibrium constant (K) for the reaction at this temperature can be calculated using the following equation: K = ([H2]^0.4 * [I2]^1.6) / [H2I]^2 Where [H2] is the concentration of hydrogen gas, [I2] is the concentration of iodine, and [H2I] is the concentration of the hydrogen iodide product.

Assuming the reaction mixture is initially at concentration 1, the initial concentrations are: [H2] = 0.400 [I2] = 1.60 [H2I] = 0

At equilibrium, the concentrations are: [H2] = 0.24 (60% of the initial hydrogen concentration has reacted) [I2] = 0.96 [H2I] = 0.8

Therefore, the equilibrium constant (K) for the reaction is: K = ([0.24]^0.4 * [0.96]^1.6) / [0.8]^2 K = 0.088

Learn more about chemical solutions:

https://brainly.com/question/26310043

#SPJ4

Answer:

They can't be in all avobe of this beacuse they may be homogeneous , colorless , heterogeneous and may be odorless .

So they cant be any one.

By :- Utsav Xettri

Answer:

A it was so hard to answer

When gathering glassware and equipment for an experiment, we must follow safety protocols.

Following protocols must be followed while handling glassware and equipment:

To learn more about the ' safety protocol' try the:

https://brainly.com/question/17994387

#SPJ4

10.2 ml of 5.0 m copper (ii) sulfate solution must be added to 160ml of water. This involves the process of dilution.

A 5.0 m copper(ii) sulfate solution must be added to 160 ml of water to achieve a .30 m copper (ii) sulfate. This is a dilution problem where you are diluting the 5.0 M solution with water to obtain a 0.30 M solution.  

The process of dilution is said to be process that involves decreasing the concentration of a solute in a solution by mixing with more solvent like adding more water to the solution. dilution of a solution means to add more solvent without the addition of more solute.

Volume x Molarity = Volume x Molarity

V1 M1 = V2 M2

(x ml) (5.0 M) = (160 + x ml) (0.30 M)

5x = 48 + 0.3x

4.7x = 48

x = 10.2 ml

putting the value of x we get,

V1 M1 = (10.2) (5.0) = 51

V2 M2 = (170.2) (0.3) = 51

To learn more about Dilution please visit:

https://brainly.com/question/1615979

#SPJ4

Area Temperature (°C) X 22 Y 18 Z 18 , The air will move from area Y to area X. Therefore, option A is correct.

The term pressure gradient is define as the change in pressure with horizontal distance. The SI Unit of pressure gradient is Pascal per meter. Mathematically, it's the gradient of pressure as a function of position.

The pressure gradient is the rise or fall in pressure. When pressure varies over a short distance, the gradient is steep, and when it changes over a long distance, it is gentle.

According  to given data, temperate of area X is greater than both area Y and Area Z.

Thus, air will move from area Y to area X.

Learn more about pressure gradient here:

brainly.com/question/13608541

#SPJ1

The number of chlorine atoms that are present in Ferric chloride are B. 3.

The molecular formula of iron chloride is FeCl3. It is composed of one iron atom and three chlorine atoms. The oxidation state of iron in this compound is +3. In an aqueous solution, this compound is basic or alkaline in nature. The primary use of ferric chloride is to remove impurities in water and for wastewater treatment.  It is a salt of weak base and a strong acid. It is prepared by treating anhydrous iron (III) chloride can be prepared by reacting metallic iron with dichloride.

Thus, the correct option is B i.e., 3 chlorine atoms are present in ferric chloride.

To learn more about molecular formula check the link below:

https://brainly.com/question/26388921

#SPJ4