The limiting reactant will be Fe.
What are limiting reactants?They are reactants that are available in limited quantities, as compared to other reactants, during the course of reactions.
From the equation of the reaction: [tex]4Fe + 3O_2 --- > 2Fe_2O_3[/tex]
The mole ratio of Fe to O2 is 4:3.
Thus, for 0.25 mol Fe, 0.25 x 3/4 = 0.1875 mol of O2 is required.
With 0.5 mol of O2 available, it means oxygen is in excess while Fe is limited in availability.
More on limiting reactants can be found here: https://brainly.com/question/14225536
#SPJ1
The limiting reactant from the calculations is Fe.
What is the limiting reactant?The limiting reactant is the reactant that is present in the least amount in solution. Now we have the equation as; 4Fe+ 3O2 → 2Fe2O3
If 4 moles of Fe reacts with 3 moles of O2
0.25 mol of Fe reacts with 0.25 mol * 3 moles/4 moles
= 0.1875 moles of O2
It then follows that the limiting reactant is Fe.
Learn More about limiting reactant:https://brainly.com/question/14225536
#SPJ1
How many moles of ammonia are produced when 5.0 moles of hydrogen react with excess nitrogen?
Taking into account the reaction stoichiometry, 3.33 moles of ammonia are produced when 5.0 moles of hydrogen react with excess nitrogen.
Reaction stoichiometryIn first place, the balanced reaction is:
N₂ + 3 H₂ → 2 NH₃
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
N₂: 2 moles H₂: 3 molesNH₃: 2 molesMass of ammonia formedThe following rule of three can be applied: if by reaction stoichiometry 3 moles of hydrogen form 2 moles of ammonia, 5 moles of hydrogen form how many moles of ammonia?
[tex]moles of ammonia=\frac{5 moles of hydrogenx 2 moles of ammonia}{3 moles of hydrogen}[/tex]
moles of ammonia= 3.33 moles
Finally, 3.33 moles of ammonia are produced when 5.0 moles of hydrogen react with excess nitrogen.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
#SPJ1
Other than reducing greenhouse gas emissions, why would an entity switch to an alternative energy solution
Answer:
renewable energy sources such as solar and wind DONT emit carbon dioxide and other greenhouse gases that contribute to global warming
Explanation:
Molecules that have at least one carbon atom bonded to four different groups are __________ while molecules that do not contain a carbon atom bonded to four different groups are
Chiral carbon refers to compounds with at least one carbon atom connected to four different groups, whereas Achiral carbon refers to molecules without a carbon atom bonded to four separate groups.
What is Chiral carbon ?Chiral carbon centres are tetrahedrally positioned carbon atoms that have four distinct substituents bonded to them. The terms "stereogenic carbons" and "asymmetrical carbon atoms" are also used to describe chiral carbon atoms.
What is Achiral carbon ?An achiral molecule lacks "handedness" and can be superimposed on its mirror copy (think of a baseball bat, which can be used with either hand)
Learn more about Chiral carbon here:
https://brainly.com/question/17013792
#SPJ4
When testing the temperature of catalase, what would happen if you changed the temperature using the same tube with the same catalase and hydrogen oxide mixture?.
The hydrogen bonds between molecules of hydrogen peroxide loosen as temperature rises toward the optimal point, facilitating catalase's reaction with the molecules. The enzyme denatures and its structure is affected if the temperature rises above the ideal level.
What is a catalase?The catalase is an enzyme that is responsible for reducing hydrogen peroxide.
What does catalase do?This enzyme is in charge of neutralizing hydrogen peroxide through its breakdownIt hence preserves an ideal level of the molecule in the cell that is also necessary for cellular signaling processesImportance of catalase enzyme:Almost every organism that is exposed to oxygen contains the very common enzyme catalase. In order to prevent oxidative damage, which can happen when cells or other molecules in the body come into contact with oxidative chemicals, catalase serves as a protective barrier in live cells.To learn more about catalase visit:
https://brainly.com/question/1560864
#SPJ4
The hydrogen bonds between molecules of hydrogen peroxide loosen as temperature rises toward the optimal point, facilitating catalase's reaction with the molecules. The enzyme denatures and its structure is affected if the temperature rises above the ideal level.
What is a catalase?The catalase is an enzyme that is responsible for reducing hydrogen peroxide.
What does catalase do?This enzyme is in charge of neutralizing hydrogen peroxide through its breakdownIt hence preserves an ideal level of the molecule in the cell that is also necessary for cellular signaling processesImportance of catalase enzyme:Almost every organism that is exposed to oxygen contains the very common enzyme catalase.In order to prevent oxidative damage, which can happen when cells or other molecules in the body come into contact with oxidative chemicals, catalase serves as a protective barrier in live cells.To learn more about catalase visit:
brainly.com/question/1560864
#SPJ4
What type of polymer is alginic acid? Which two modified carbohydrate units make up the basic building block of this polymer?
An alginic acid is bio polymer. The two modified carbohydrate units make up the basic building block of this polymer are guluronic acid ( G) and mannuronic acid (M).
Alginic acid is a biopolymer formed from chain of polyuronic acid. Alginic acid is polysaccharide found in brown algae. Alginic acid is also known as Algin. it is linear co-polymer.
Polysaccharides are found in the food and it is most abundant carbohydrates. It is long chains of monosachharides. Polysaccharides is formed by glycosidic linkage or bonds .
Example of polysaccharides are cellulose , starch , glucogen.
lern about polysaccharide
https://brainly.com/question/780562
#SPJ4
Blood alcohol concentration (bac) is defined as the ration of alcohol in the system to?
Blood Alcohol Concentration (BAC) is defined as the ratio of alcohol in the system to Blood in the system.
Blood/Breath Alcohol concentration (BAC) is the quantity of alcohol within the bloodstream or on one's breath. BAC is expressed because of the weight of ethanol, in grams, in 100 milliliters of blood, or 210 liters of breath. BAC can be measured with the aid of breath, blood, or urine exams.
Blood alcohol content material shows the percentage of alcohol that is in a person's bloodstream. BAC is crucial to prosecutors because they accept it as true with it displays how tons an individual is impaired via alcohol.
Human beings making their own alcoholic beverages regularly calculate the percentage of alcohol by way of extent by way of measuring their relative density with a hydrometer or their sugar content material with a refractometer.
Learn more about alcohol here: https://brainly.com/question/24129981
#SPJ4
A Carnot cycle operates between the temperatures limits of 400 K and 1600 K, and produces 3600 kW of net power. The rate of entropy change of the working fluid during the heat addition process is
The rate of entropy change:
The rate of entropy change of the working fluid during the heat addition process is 3 kW/K
What is the Carnot cycle?
The Carnot Cycle is a thermodynamic cycle made up of reversible isothermal expansion, adiabatic expansion, isothermal compression, and adiabatic compression processes in succession. The ratio of the heat absorbed to the temperature at which the heat was absorbed determines the change in entropy.The entropy of a system:
The rate of heat addition is expressed as,
Q = [tex]\frac{WT_{H}}{T_{H}- T_{L}}[/tex]
The entropy of a system is a measure of how disorderly a system is getting. The rate of entropy generation during heat addition is,
[tex]S_{gen} = \frac{Q}{T_{H}} = \frac{W}{T_{H} - T_{L}}[/tex]
Calculation:
Given:
[tex]T_{L}[/tex] = 400K
[tex]T_{H}[/tex] = 1600K
W = 3600 kW
Put all the values in the above equation, and we get,
[tex]S_{gen} = \frac{W}{T_{H} - T_{L}}[/tex] = [tex]\frac{3600}{1600-400}[/tex] = 3 kW/K
The rate of entropy change is 3 kW/K
Learn more about the Carnot cycle here,
https://brainly.com/question/13002075
#SPJ4
Which way does heat flow?
When you are taking a test, you are awake and alert. this means that your brain is currently generating _____.
a. alpha wave
b. beta wave
c. theta wave
d. delta wave
When you are taking a test, you are awake and alert, which means that your brain is currently generating beta waves (Option b).
What are beta waves?The beta waves are a special type of brain waves observed by using electromagnetic devices (especially in physiology).
This type of waves are dominant during conscious thought as well as during cognitive logical thinking processes.
In conclusion, when you are taking a test, you are awake and alert, which means that your brain is currently generating beta waves (Option b).
Learn more about brain waves here:
https://brainly.com/question/10021720
#SPJ1
Which of the following are SI units? Select
all that apply.
Seconds (s)
Liters (L)
Explanation:SI units relate to the International System of Units. These units are the base, metric units that are most commonly accepted for different measurements.
Common SI Units
The most common SI units are as follows:
Length - meter (m)Time - second (s)Mass - kilogram (kg)Amount of substance - mole (mole)Electric current - ampere (A)Temperature - kelvin (K)Volume - liter (L)*Note that gram (g) is not an SI unit
Each type of measurement will only have 1 SI unit. This is the unit that will be expected for most answers. Sometimes this means converting an answer into a different unit so it is more widely accepted.
Why SI Units are Important
SI units are important for the same reason that the metric system is used. It gives a standardized list of measurements that scientists across the world can use. Also, it makes it easier to compare scientific findings and studies when all of the measurements are given in the same units.
There are times when it is unrealistic to use SI units. For example, when discussing space, using meters will not be realistic due to the size of space. Also, when measuring the mass of small elements, kilograms are too large. But otherwise, SI units should be used.
Which of the following is true about a redox reaction?
In a redox reaction, the reducing agent loses electrons..
In a redox reaction, the oxidizing agent loses electrons.
In a redox reaction, the oxidized species gains electrons.
In a redox reaction, the reduced species loses electrons
AnswerThe correct (A).
Explanation:
The true statement about the redox reaction is In a redox reaction, an electron is lost by the oxidizing agent.
Answer:A
Explanation:i took the test
According to the Arrhenius definitions of acids and bases, choose the bases from the list of acids and bases. Check all that apply.
Answer:
a
d
please give me brainliest
Answer:
A C D. All the other answers got it wrong for Edg3
Explanation:
Sodium phosphate dissolves as follows: na3po4(s) → 3na (aq) po4-(aq). How many moles of na3po4 are required to make 1. 0 l of solution in which the na concentration is 0. 15 m?
The 0.05 moles of [tex]Na_{3}PO_{4}[/tex] required to make 1 L of solution in which the [tex]Na[/tex] concentration is 0. 15 M.
Calculation,
The Sodium phosphate dissolves as follows:
[tex]Na_{3}PO_{4}(s)[/tex] → [tex]3Na^{+} (aq)+PO_{4}^{-} (aq)[/tex]
To make 1. L of solution in which the [tex]Na^{+[/tex]concentration is 0. 15 M
The morality of [tex]Na^{+[/tex]= 0.15 M = number of moles / volume in lit
The morality of [tex]Na^{+[/tex]= 0.15 M = number of moles /1 Lit
number of moles of [tex]Na^{+[/tex] = 0.15 mole
The mole ratio is 1: 3
It means, the 1 mole of [tex]Na_{3}PO_{4}(s)[/tex] required to form 3 mole of [tex]Na^{+[/tex]
So, to form 0.15 mole of [tex]Na^{+[/tex] = 1×0.15 / 3 moles of [tex]Na_{3}PO_{4}(s)[/tex]required.
Hence, number of moles of [tex]Na_{3}PO_{4}(s)[/tex] required = 0.05 moles.
learn about moles
brainly.com/question/26416088
#SPJ4
Describe the scale used to measure the basicity of a substance. Demonstrate how you could differentiate a weak base from a strong one. (10
points)
Answer:
The pH scale is used to measure the acidity or basicity of a substance.
Explanation:
pH stands for potential hydrogen. It ranges from 0 to 14, 7 being neutral. The pH of water is 7 i.e. it is neither acidic nor basic. 0 to 7 shows acidic behavior while 7 to 14 shows basic behavior.
Experiment:
Dip the pH paper in the liquid and wait for ten seconds. The pH strip starts to discolor.
For a strong acid the strip will turn red.
For a weak acid the strip will become pale red.
To find the correct pH value we can compare it with the indicator scale present on the pH scale box.
The scale used to measure the basicity of a substance is called the pH scale.
What is the pH scale?The pH scale is a logarithmic scale that ranges from 0 to 14 and is used to determine the acidity or basicity of a solution. A pH value of 7 is considered neutral, values below 7 are acidic, and values above 7 are basic.
To differentiate a weak base from a strong one, you can perform the following experiments:
pH Measurement: Measure the pH of the solution containing the base using a pH meter or pH indicator paper. A strong base will have a higher pH value, typically around 12-14, indicating a highly basic solution. A weak base will have a lower pH value, closer to 7, indicating a less basic or slightly basic solution.
Conductivity Test: Dissolve a small amount of the base in water and measure its electrical conductivity using a conductivity meter. Strong bases are good electrolytes and will conduct electricity well, resulting in a high conductivity. Weak bases, on the other hand, are poor electrolytes and will exhibit lower conductivity.
Reaction with Acids: Add a few drops of a strong acid, such as hydrochloric acid (HCl), to a solution containing the base. Strong bases will rapidly and completely neutralize the acid, resulting in a significant increase in pH. Weak bases, however, will only partially neutralize the acid, leading to a smaller increase in pH.
Learn more about pH scale at:
https://brainly.com/question/1433865
#SPJ2
The combustion of hydrogen gas releases 286 kJ per mol of hydrogen. If 13.0 L of hydrogen at STP was burned to produce electricity, how long would it power a 100-watt (W) light bulb
Combustion of hydrogen produces electricity:
It would power a 100-watt (W) light bulb in 27.66 min.
Calculation:
At STP conditions, we know that 1 mole of any gas is contained in 22.4L.
So let's make the operation:
The volume of one mole of gas at STP is 22.4 L
Then, 13.0 L may be the volume for (13.0) /22.4 = 0.58 moles.
The total energy is released = 0.58 x 286 kJ
Total energy = 165.98 kJ
Energy = Power x time
Time = energy / power
where power = 100W = 100 J/s
Therefore, Time = 165.98 kJ/ 100J/s = 1659.8 sec
Time = 1659.8 sec / 60 min = 27.66 min
∴ Time = 27.66 min
Learn more about combustion here,
https://brainly.com/question/13746752
#SPJ4
This table resembles a condensed version of the modern periodic table. Using the full periodic table as a reference, type the symbols for the elements from part A into this table based on their appropriate group and period.
re write the question.
Explanation:
it seems incomplete.
Are isotopes similar to ions, yes or no?
Answer:
Yes
Explanation:
Isotopes are atoms of the same element that have different numbers of neutrons in their nuclei. Everything else about them is the same.(If you want more explanation tell me).
The equilibrium constant for the reaction shown here is Kc=5.0×102. A reaction mixture at equilibrium contains [A]=1.0×10−3M. What is the concentration for the B mixture?
A(g)⇌B(g)
Here are the choices:
A. 1.0×10−3M
B. 5.0×102M
C. 1.0 M
D. 0.50 M
D. The concentration for the B mixture is 0.5 M.
concentration for the B mixturekc = [B]/[A]
where;
kc is equilibrium constantA is the concentration for the A mixtureB is the concentration for the B mixtureB = kc(A)
B = (5x 10²)(1 x 10⁻³)
B = 0.5 M
Thus, the concentration for the B mixture is 0.5 M.
Learn more about concentration here: https://brainly.com/question/17206790
#SPJ1
Write the empirical formula for at least four ionic compounds that could be formed from the following ions
Answer:
FeCO₃, Fe(IO₃)₂, Pb(CO₃)₂, Pb(IO₃)₄
Explanation:
Cations (positively charged ions) can only form ionic bonds with anions (negatively charged ions). However, you can't just simply put one cation and one anion together to form a compound. Each compound needs to been neutral, or have an overall charge of 0. When cations and anions do not have charges that perfectly cancel, you need to modify the amount of each ion in the compound.
1.) FeCO₃
-----> Fe²⁺ and CO₃²⁻
-----> +2 + (-2) = 0
2.) Fe(IO₃)₂
-----> Fe²⁺ and IO₃⁻
-----> +2 + (-1) + (-1) = 0
3.) Pb(CO₃)₂
-----> Pb⁴⁺ and CO₃²⁻
-----> +4 + (-2) + (-2) = 0
4.) Pb(IO₃)₄
-----> Pb⁴⁺ and IO₃⁻
-----> +4 + (-1) + (-1) + (-1) + (-1) = 0
[tex]\rm FeCO_3, Fe(IO_3)_2, Pb(CO_3)_2, Pb(IO_3)_4[/tex] are the empirical formula for at least four ionic compounds that could be formed from the given ions.
Ions, which are atoms or molecules with one or more lost or acquired electrons and an electric charge, are bonded together to create ionic compounds, a particular class of chemical complex. A metal cation (a positively charged ion) and a non-metal anion (a negatively charged ion) typically make up these compounds. Ionic bonding is a process that leads to the synthesis of ionic compounds. A non-metal atom becomes a negatively charged anion when it gets one or more electrons, while a metal atom becomes a positively charged cation when it loses one or more electrons.
To know more about ionic compounds, here:
https://brainly.com/question/30420333
#SPJ7
How many atoms are in 76.15 grams of fe
urgently needed, will mark brainliest
Answer:
See below
Explanation:
From periodic table
mole weight of Fe is 55.845 gm / mole
76.15 gm / 55.845 gm/mol * 6.022 x 10^23 atoms/mole =
8.212 x 10^23 atoms ( four signif. digits)
A gas has experienced a small increase in volume but has maintained the same pressure and number of moles. According to the ideal gas law, how has the temperature of the gas changed?
It has increased two times.
It has increased slightly.
It has decreased slightly.
It has stayed the same
According to the ideal gas law, if the volume experienced a small increase, the temperature increases slightly as well. (It has increased slightly.)
What is the ideal gas equation?It is an equation that relates the pressure (P), volume (V), number of moles (n) and temperature (T) of an ideal gas.
Let's consider the ideal gas law.
P × V = n × R × TA
T = P × V / n × R
According to the expression above, there is a direct relationship between volume and temperature. Thus, if the volume experienced a small increase, the temperature increases slightly as well.
Learn more about the ideal gas law here: https://brainly.com/question/25290815
#SPJ1
An element with 11 neutrons, 11 protons, and 11 electrons would have a mass number o?
The mass number of element is 22.
The mass number is the sum of number of electrons/proton and number of neutron .
Mass number = number of proton/electron + number of neutrons
If an element with 11 neutrons, 11 protons, and 11 electrons then mass number is calculated as,
Mass number = number of proton/electron + number of neutrons
Mass number = 11 + 11 = 22
learn about element
https://brainly.com/question/14347616
#SPJ4
What product is used in a pedicure bath to cleanse and soften the skin? a foot masque a foot soak massage oil cuticle remover submitnext
The product which is used in a pedicure bath to cleanse and soften the skin is foot soak
What is skin pedicure?Skin pedicure is a special and cosmetic treatment of the body's skin including the feet and toenails, analogous to a manicure.
So therefore, the product which is used in a pedicure bath to cleanse and soften the skin is foot soak
Learn more about skin :
https://brainly.com/question/306377
#SPJ1
Which of the following explanations accounts for the fact that the ion-solvent interaction is greater for Li than for K
Li+ has a smaller ionic radius than K+
and smaller molecules have more collisions/interactions between each other
What is ion-solvent interaction ?In the case of ion-solvent interactions, the state in which the interac-tions exist is an obvious one; it is the situation in which ions are inside the solvent.
Ions are charged particles, and charges interact with other charges. So there will also be ion-ion, as well as ion-solvent, interactions in the solution.In the process of solvation, ions are surrounded by a concentric shell of solvent. Solvation is the process of reorganizing solvent and solute molecules into solvation complexes.Learn more about Ion-solvent interaction here:
https://brainly.com/question/21307101
#SPJ4
Given that the initial rate constant is 0.0110s−1 at an initial temperature of 21 ∘C , what would the rate constant be at a temperature of 150. ∘C for the same reaction described in Part A?
Part A said: The activation energy of a certain reaction is 45.5 kJ/mol . At 21 ∘C , the rate constant is 0.0110s−1 . At what temperature in degrees Celsius would this reaction go twice as fast?
T2= 32 degrees
The rate of reaction at 150 degrees is 1.878.
What is the activation energy?We have the formula as;
ln(k2/k1) = Ea/R (1/T1 - 1/T2)
ln(2( 0.0110)/0.0110) = 45.5 * 10^3/8.314(1/294 - 1/T2)
0.693 = 5473(1/294 - 1/T2)
0.693/ 5473 = (1/294 - 1/T2)
1.27 * 10^-4 = 1/294
1/T2 = 1/294 - 1.27 * 10^-4
1/T2 = 340 * 10^-4 - 1.27 * 10^-4
T2 = 30 degrees
Again;
ln(k2/0.0110) = 45.5 * 10^3/8.314(1/303 - 1/423)
ln(k2/0.0110) = 5473(3.3 * 10^3 - 2.36 * 10^3)
ln(k2/0.0110) = 5.14
k2/0.0110 = e^5.14
k2 = 0.0110 * e^5.14
k2 = 1.878
The temperature that the reaction will go twice as fast is 30 degrees while the rate construction at 150 degrees is 1.878.
Learn more about Arrhenius equation:https://brainly.com/question/15051189
#SPJ1
Which one of the following terms is used to describe a loan wherein each payment is equal in amount and includes both interest and principal
amortized loan one of the following terms is used to describe a loan wherein each payment is equal in amount and includes both interest and principal.
What is an amortized loan?
A loan that is amortized requires the borrower to pay interest and principal over time. A three-year investment yields 5% a year in interest, paid out semi-annually.An amortized loan payment initially covers the interest cost for the period; any balance is applied to the principle balance.What does it mean when a loan is amortized?
A loan that is amortized over a predetermined period of time is a type of financing. The borrower pays the same amount over the course of the loan under this form of repayment plan, with the initial portion going toward interest and the remaining sum being applied to the existing loan principal.Learn more about amortized loan
brainly.com/question/13514748
#SPJ4
Draw the major 1,2- and 1,4-addition products that form as a result of the following reaction between one equivalent each of 2,4-hexadiene and HBr.
The major 1,2- and 1,4-addition products are 4-Bromo-2-hexene and 2-Bromo-2-hexene.
What is Markovnikov Rule ?
Markovnikov rule explains that in addition reaction of alkene react with a hydrogen halide. The hydrogen atom is attached to the carbon atom that is already bonded to the greatest number of hydrogen.
What is Addition Reaction ?An addition reaction is an organic reaction occur when two or more molecules combine to form a larger molecule without the loss of any atoms present in reactant.
Thus from the above conclusion we can say that The major 1,2- and 1,4-addition products are 4-Bromo-2-hexene and 2-Bromo-2-hexene.
Learn more about the Markovnikov Rule here: https://brainly.com/question/21496002
#SPJ1
A
What type of reaction is illustrated?
C₂H4+302 → 2CO₂ + 2H₂O
combustion
decomposition
double
replacement
Answer:
A.) combustion
Explanation:
Combustion reactions are a specific type of redox reaction which always have the same general structure: CₓHᵧ + O₂ ---> H₂O + CO₂ + heat/light
Decomposition reactions are reactions which involve a molecule breaking down into smaller compounds/elements. They have the general structure: AB ---> A + B
Double replacement reactions are reactions in which the cation of one compound is swapped with the cation of another compound. They have the general structure: AB + CD ---> AD + CB
A ____________ is a planar, six-membered ring used to represent the cyclic form of glucose and other sugars.
Answer:
Haworth projection (14.3)
please give me brainliest
Zinc Sulfide reacts with oxygen according to the reaction:
2ZnS (s) + 3 O2(g) 2 ZnO (s) +2 SO2 (g)
A reaction mixture contains 4.2 moles of zinc sulfide and 6.8 moles of oxygen. Once the reaction occurred as a completely as possible, what amount in moles is left of the excess reactant?
The amount in moles of the excess reactant left is 0.5 mole
Balanced equation2ZnS (s) + 3O₂(g) --> 2ZnO (s) + 2SO₂(g)
From the balanced equation,
2 moles of ZnS reacted with 3 moles of O₂
How to determine the excess reactantFrom the balanced equation,
2 moles of ZnS reacted with 3 moles of O₂
Therefore,
4.2 moles of ZnS will react with =(4.2 × 3) / 2 = 6.3 moles of O₂
From the calculations made above, we can see that only 6.3 moles of O₂ out of 6.8 moles given, is required to react completely with 4.2 moles of ZnS.
Thus, ZnS is the limiting reactant and O₂ is the excess reactant.
How to determine the mole of the excess reactant remainingThe excess reactant is O₂. Thus the mole remaining after the reaction can be obtained as illustrated below:
Mole of O₂ given = 6.8 molesMole of O₂ that reacted = 6.3 molesMole of O₂ remaining =?Mole of O₂ remaining = (Mole of O₂ given) - (Mole of O₂ that reacted)
Mole of O₂ remaining = 6.8 - 6.3
Mole of O₂ remaining = 0.5 mole
Learn more about stoichiometry:
https://brainly.com/question/25685654
#SPJ1