In a survey 75 people, 60% said they have more than one tv at home. How many people have more than one tv at home?

Answer: Option D. will be the answer.

Explanation: The bowling scores for six persons have been given as 27, 142, 145, 146, 154, 162.

The most appropriate measure of the center of these scores will be the median.

Here median will be mean of 146 and 146 because number of persons are 6 which is an even number.

So there are two center scores those are 145 and 146 and median =  

Option D. will be the answer.

Answer:

weight =48.71228786pounds

Step-by-step explanation:

[tex]w = \frac{k}{ {d}^{2} } \\ 50 = \frac{k}{ {3960}^{2} } \\ \\ k = 50 \times {3960}^{2} \\ k = 50 \times 15681600 \\ k = 784080000 \\ \\ w = \frac{784080000}{ {d}^{2} } \\ w = \frac{784080000}{16120225} \\ \\ w = 48.71228786 \\ w = 48.7pounds[/tex]

If a body weighs 50 pounds when it is 3,960 miles from Earth's center, it would weigh approximately 48.547 pounds if it were 4,015 miles from Earth's center, according to the inverse square law formula.

We know the inverse square law formula:

W₁ / W₂ = D²₂ / D²₁

Where W₁ is the weight of the body at the initial distance D₁, and W₂ is the weight at the final distance D₂.

So we have,

W₁ = 50

D₁  = 3,960

D₂  = 4015

We know that the body weighs 50 pounds when it is 3,960 miles from Earth's center,

So we can plug in those values as follows:

50 / W₂ = (4,015)²/ (3,960)²

To solve for W₂, we can cross-multiply and simplify as follows:

W₂ = 50 x (3,960)² / (4,015)²

W₂ = 50 x 15,681,600 / 16,120,225

W₂ = 48.547 pounds (rounded to three decimal places)

Therefore, if the body were 4,015 miles from Earth's center, it would weigh approximately 48.547 pounds.

To learn more about inverse square law visit:

https://brainly.com/question/30562749

#SPJ2

Answer:

-6 + 14

8

Step-by-step explanation:

Given: Hank is -6 below feet. He rises +14 feet above level.

-6 + 14 = 8

Addition expression: -6 + 14

Sum: 8

Hope this helped.

Answer:

He should find 24 defective lightbulbs.

Step-by-step explanation:

1. Divide the number of defective bulbs by the total number of bulbs for each section.

2. Make sure the number you get is the same each time.

3. Divide the guessed number of bulbs (24) by the total number of bulbs (336)

4. If the number you got for step 4 matches the number you got for step 3, then he is right

Answer:

The answer is A

Step-by-step explanation:

on NCCA

Answer:

132 degrees

Step-by-step explanation:

Looking at angle A and angle B, they are alternate interior angles. That means they are congruent to one another. Knowing that, we can set up an equation A=B

We can now fill A and B with their given equations

5x-18=3x+42

Now we solve

2x=60

x=30

Now that we know x is 30, we can replace it in the equation for A

5x-18

5(30)-18

150-18

132 degrees

Answer:

132

Step-by-step explanation:

ANGLE A = ANGLE B

(INTERIOR ALTERNATE ANGLES)

5x - 18 = 3x  + 42

2x = 60

x = 30

angle a = 150 - 18

= 132

We have to convert it to m/s

[tex]\boxed{\sf 1km/h=\dfrac{5}{18}m/s}[/tex]

[tex]\\ \sf\longmapsto 40km/h[/tex]

[tex]\\ \sf\longmapsto 40\times \dfrac{5}{18}[/tex]

[tex]\\ \sf\longmapsto \dfrac{200}{18}[/tex]

[tex]\\ \sf\longmapsto 11.1m/s[/tex]

km/h > m/s

when converting km/h to m/s all you need to do is divide by 3.6

and vise versa when converting m/s to km/h multiply by 3.6

so therefore,

40km/h > m/s

= 40 / 3.6

= 11.11 m/s (4sf)

Answer:

a) No sufficient evidence to support the claim that the two machines produce rods with different mean diameters.

b) P-value is 0.80

c)  −0.3939 <μ< 0.4939

Step-by-step explanation:

Given Data:

sample sizes

n1 = 15

n2 = 17

sample means:

x1 = 8.73

x2 = 8.68

sample variances:

s1² = 0.35

s2² = 0.40

Hypothesis:

H₀ : μ₁ = μ₂

H₁ :  μ₁ ≠ μ₂

Compute the pooled standard deviation:

[tex]s_{p} = \sqrt{\frac{(n_{1} - 1)s_{1}^{2} + (n_{2} - 1)s_{2}^{2}}{n_{1} +n_{2} -2} }[/tex]

    [tex]= \sqrt{\frac{(15-1)0.35+(17-1)0.40}{15+7-2}}[/tex]

    [tex]= \sqrt{\frac{(14)0.35+(16)0.40}{30}}[/tex]

 [tex]= \sqrt{\frac{4.9+6.4}{30}}[/tex]

 [tex]= \sqrt{\frac{11.3}{30}}[/tex]

[tex]= \sqrt{0.376667}[/tex]

= 0.613732

= 0.6137

Compute the test statistic:

[tex]t = \frac{x_{1} -x_{2} }{s_{p} \sqrt{\frac{1}{n_{1} }+\frac{1}{n_{2} } } }[/tex]

[tex]= \frac{8.73-8.68}{0.6137\sqrt{\frac{1}{15}+\frac{1}{17} } }[/tex]

[tex]= \frac{0.05}{0.6137\sqrt{0.06667+0.05882} } }[/tex]

[tex]= \frac{0.05}{0.6137\sqrt{0.12549} } }[/tex]

[tex]= \frac{0.05}{0.6137(0.354246)} } }[/tex]

[tex]= \frac{0.05}{0.6137(0.354246)} } }[/tex]

= 0.05 / 0.217401

= 0.22999

t = 0.230

Compute degree of freedom:

df = n1 + n2 -2 = 15 + 17 - 2 = 30

Compute the P-value from table using df = 30

P > 2 * 0.40 = 0.80

P > 0.05 ⇒ Fail to reject H₀

Null hypothesis is rejected when P-value is less than or equals to level of significance. But here the P-value = 0.80 and level of significance = 0.05. So P-value is greater than significance level. Hence there is not sufficient evidence to support the claim that population means are different.

Construct a 95% confidence interval for the difference in mean rod diameter:

confidence = c = 95% = 0.95

α = 1 - c

  = 1 - 0.95

α = 0.05

Compute degree of freedom:

df = n1 + n2 -2 = 15 + 17 - 2 = 30

Compute [tex]t_{\alpha /2}[/tex] with df = 30 using table:

t₀.₀₂₅ = 2.042

Compute confidence interval:

= [tex](x_{1}-x_{2})-t_{\alpha/2} ( s_{p} )\sqrt{\frac{1}{n_{1} }+\frac{1}{n_{2} } }[/tex]

= (8.73 - 8.68) -  2.042 ( 0.6137 ) [tex]\sqrt{\frac{1}{15} +\frac{1}{17} }[/tex]

= 0.05 - 2.042 ( 0.6137 ) [tex]\sqrt{\frac{1}{15} +\frac{1}{17} }[/tex]

= 0.05 - 1.253175 [tex]\sqrt{0.06667+0.05882} } }[/tex]

= 0.05 - 1.253175 [tex]\sqrt{0.12549} } }[/tex]

= 0.05 - 1.253175 (0.35424))

= 0.05 - 0.443925

= −0.393925

= −0.3939

[tex](x_{1}-x_{2})+t_{\alpha/2} ( s_{p} )\sqrt{\frac{1}{n_{1} }+\frac{1}{n_{2} } }[/tex]

= (8.73 - 8.68) +  2.042 ( 0.6137 ) [tex]\sqrt{\frac{1}{15} +\frac{1}{17} }[/tex]

= 0.05 + 2.042 ( 0.6137 ) [tex]\sqrt{\frac{1}{15} +\frac{1}{17} }[/tex]

= 0.05 + 1.253175 [tex]\sqrt{0.06667+0.05882} } }[/tex]

= 0.05 + 1.253175 [tex]\sqrt{0.12549} } }[/tex]

= 0.05 + 1.253175 (0.35424))

= 0.05 + 0.443925

= 0.493925

= 0.4939

−0.3939 <μ₁ - μ₂< 0.4939

Let

ATQ

[tex]\\ \sf\longmapsto x+4x-6=94[/tex]

[tex]\\ \sf\longmapsto 5x-6=94[/tex]

[tex]\\ \sf\longmapsto 5x=94+6[/tex]

[tex]\\ \sf\longmapsto 5x=100[/tex]

[tex]\\ \sf\longmapsto x=\dfrac{100}{5}[/tex]

[tex]\\ \sf\longmapsto x=20[/tex]

Answer:

$20

Step-by-step explanation:

T is Ted

K is Katie

T+K=94.

T=4K-6

I mostly just tried a bunch of numbers.

To check:

T+20=94

T=74

74=4(20)-6

74=80-6

74=74

I hope this helps!

pls ❤ and give brainliest pls

Answer:

C but see below.

Step-by-step explanation:

If I'm reading this correctly, you mean 31/24. It really can't be much else.  The sine and cosine are both incorrect because both involve the hypotenuse which must be calculated in order for them to be considered. In addition 31/24 is greater than one which is impossible for both the Sine and the Cosine.

That leaves K and D

Tan(D) = 24/31 which is not an option.

That leaves C.

tan(K) = 31/24 which is what you have to choose. If your choice is not written this way, then there is no answer.

Answer:

The answer to this problem is C. tanK=3124

Hello, please consider the following.

We know that

[tex]a = p^{\frac{1}{3}}-p^{-\frac{1}{3}}\\\\=p^{\frac{1}{3}}-\dfrac{1}{p^{\frac{1}{3}}}[/tex]

And we can write that.

[tex](p-\dfrac{1}{p})^3=(p-\dfrac{1}{p})(p^2-2+\dfrac{1}{p^2})\\\\=p^3-2p+\dfrac{1}{p}-p+\dfrac{2}{p}-\dfrac{1}{p^3}\\\\=p^3-\dfrac{1}{p^3}-3(p-\dfrac{1}{p})[/tex]

It means that, by replacing p by [tex]p^{1/3}[/tex]

[tex](p^{1/3}-\dfrac{1}{p^{1/3}})^3=p-\dfrac{1}{p}-3(p^{1/3}-\dfrac{1}{p^{1/3}})\\\\\\\text{ So }\\\\a^3=p-\dfrac{1}{p}-3a\\\\<=>\boxed{ a^3+3a=p-\dfrac{1}{p} }[/tex]

Hope this helps.

Do not hesitate if you need further explanation.

Thank you

what

Step-by-step explanation:

pretty sure its 25 percent

Answer:

25%

Step-by-step explanation:

if you take half of 50 it is 25 so all of it is used or 25%

Hope this helps <3 Comment if you want more thanks and be sure to give brainliest (4 left) <3

Part a)

There are 52 letters (26 lowercase and 26 uppercase), 10 digits, and 6 symbols. There are 52+10+6 = 68 different characters to choose from.

Adding up those subtotals gives

68^8+68^9+68^10+68^11+68^12 = 9.9207 * 10^21

different passwords possible.

======================================================

Part b)

Let's find the number of passwords where we don't have a special symbol

There are 52+10 = 62 different characters to pick from

Adding those subtotals gives

62^8+62^9+62^10+62^11+62^12 = 3.2792 * 10^21

different passwords where we do not have a special character. Subtract this from the answer in part a) above

( 9.9207 * 10^21)  - (3.2792 * 10^21) = 6.6415 * 10^21

which represents the number of passwords where we have one or more character that is a special symbol. I'm using the idea that we either have a password with no symbols, or we have a password with at least one symbol. Adding up those two cases leads to the total number of passwords possible.

======================================================

Part c)

The answer from part a) was roughly 9.9207 * 10^21

It will take about 9.9207 * 10^21  nanoseconds to try every possible password from part a).

Divide 9.9207 * 10^21  over 1*10^9 to convert to seconds

(9.9207 * 10^21 )/(1*10^9) = 9,920,700,000,000

This number is 9.9 trillion roughly.

It will take about 9.9 trillion seconds to try every password, if you try a password per second.

------

To convert to hours, divide by 3600 and you should get

(9,920,700,000,000)/3600 = 2,755,750,000

So it will take about 2,755,750,000 hours to try all the passwords.

------

Divide by 24 to convert to days

(2,755,750,000)/24= 114,822,916.666667

which rounds to 114,822,917

So it will take roughly 114,822,917 days to try all the passwords.

------

Then divide that over 365 to convert to years

314,583.334246576

which rounds to 314,583

It will take roughly 314,583 years to try all the passwords

------------------------------

All values are approximate, and are roughly equivalent to one another.

A) 9,920,671,339,261,325,541,376 different passwords are available for this computer system.

B) 875,353,353,464,234,606,592 of these passwords contain at least one occurrence of at least one of the six special characters.

C) It would take 314,582.42 years for a hacker to try every possible password.

To determine how many different passwords are available for this computer system; how many of these passwords contain at least one occurrence of at least one of the six special characters; and how long it takes a hacker to try every possible password, assuming that it takes one nanosecond for a hacker to check each possible password, the following calculations must be performed:

Learn more in https://brainly.com/question/19912049

HA

See In Triangle DEF and Triangle XZY

[tex]\because\begin{cases}\sf \angle E=\angle Z=90° \\ \sf \ FD\sim XY=Hypotenuse\end{cases}[/tex]

Hence

[tex]\sf \Delta DEF\sim \Delta XZY(Angle-Angle)[/tex]

The theorems that verify that Δ DEF ~ Δ XZY is AA theorem of similarity.

Two triangles are said to be similar if their corresponding angles are congruent and the corresponding sides are in proportion.

Given that, two triangles, Δ DEF and Δ XZY, we need to find a theorem that will verify that, Δ DEF and Δ XZY are similar,

So, we have, ∠ X = 40°,

Therefore, ∠ Y = 90°-40° = 50°

Now, we get,

∠ Y = ∠ F = 50°

∠ E = ∠ Z = 90°

We know that,

if two pairs of corresponding angles are congruent, then the triangles are similar.

Therefore, Δ DEF ~ Δ XZY by AA rule

Hence, the theorems that verify that Δ DEF ~ Δ XZY is AA theorem of similarity.

Learn more about Similar triangles click;

https://brainly.com/question/14926756

#SPJ7

Answer:

Step-by-step explanation:

Given that :

population Mean = 15000

standard deviation= 1200

sample size n = 100

sample mean = 16000

The null and the alternative hypothesis can be computed as follows:

[tex]\mathtt{H_o : \mu = 15000 }\\ \\ \mathtt{H_1 : \mu > 15000}[/tex]

Using the standard normal z statistics

[tex]z = \dfrac{\overline X - \mu}{\dfrac{\sigma }{\sqrt{n}}}[/tex]

[tex]z = \dfrac{16000 -15000}{\dfrac{1200 }{\sqrt{100}}}[/tex]

[tex]z = \dfrac{1000}{\dfrac{1200 }{10}}[/tex]

[tex]z = \dfrac{1000\times 10}{1200}[/tex]

z = 8.333

degree of freedom = n - 1 = 100 - 1 = 99

level of significance ∝ = 0.05

P - value from the z score = 0.00003

Decision Rule: since the p value is lesser than the level of significance, we reject the null hypothesis

Conclusion: There is sufficient evidence  that the Dean claim for his graduate students earn more than average salary of $15,000

Dean's Claim of Average Salary = 16000, ie greater than 15000 : is correct

Null Hypothesis [ H0 ] : Average Salary = 15000

Alternate Hypothesis [ H1 ] : Average Salary > 15000

Hypothesis is tested using t statistic.

t = ( x - u ) / ( s / √ n ) ; where -

x = sample mean , u = population mean , s = standard deviation, n = sample size

t = ( 16000 - 15000 ) / ( 1200 / √100 )

= 1000 / 120

t  {Calculated} = 8.33,

Degrees of Freedom = n - 1 = 100 = 1 = 99

Tabulated t 0.05 (one tail) , at degrees of freedom 99 = 1.664

As Calculated t value 8.33 > Tabulated t value 1.664 , So we reject the Null Hypothesis in favour of Alternate Hypothesis.

So, conclusion : Average Salary > 15000

To learn more, https://brainly.com/question/17099835?referrer=searchResults

Answer:

An aluminum bar 4 feet long weighs 24 pounds

Step-by-step explanation:

Step-by-step explanation:

The answer is mentioned above.

Answer:

The correct answer will be option b

Step-by-step explanation:

We know that x = rcos( θ ), and y = rsin( θ ), so let's rewrite this polar equation.

r = 4( x / r ) + 2( y / r ),

r = 4x / r + 2y / r,

r = 4x + 2y / r,

r / 1 = 4x + 2y / r ( Cross - Multiply )

4x + 2y = r²

We also know that r² = x² + y², so let's substitute.

x² + y² = 4x + 2y,

x² - 4x - 2y + y² = 0,

Circle Equation : ( x - 2 )² + ( y - 1 )² = ( √5 )²,

Solution : ( x - 2 )² + ( y - 1 )² = 5

the models aren't given..

Answer: no models given

Step-by-step explanation:

Answer:

2.34

Step-by-step explanation:

A pharmacy purchased 550 products over a period of 3 months

The average inventory was 235 products during the period of 3 months

Therefore, the inventory turnover rate for this period can be calculated as follows

= 550/235

= 2.34

Hence the inventory turnover rate for this period is 2.34

Answer:

(6, ....... )  ( -3, .........)  ( 1, .......)

x,y values therefore = (6, 29) ( -3, -34) (1, -6)

as x = 0 when y = -13

we simply x 6 into equation to find 30

y = 7 x 6 -13

y = 42 - 13

y = 29  

Then for -3 we simply x by -3 to find y

y = 7 x -3 -13

y = -21 - 13

y = -34

then for 1 we simply x by 1 to find y

y = 7 x 1 -13

y = 7 - 13

y = -6

y = 7x - 13

Step 1)  Set above equation equal to 0 by remembering the methods;

Solve   y-7x+13  = 0

Step 2)  Calculate the y intercept;

Notice that when x = 0 the value of y is -13/1 so this line "cuts" the y axis at y=-13.00000   see attached to help memorize.

Step 3) Calculate the X-Intercept :

When y = 0 the value of x is 13/7 Our line therefore "cuts" the x axis at x= 1.85714

Step 4) Calculate the Slope :

Slope is defined as the change in y divided by the change in x. We note that for x=0, the value of y is -13.000 and for x=2.000, the value of y is 1.000. So, for a change of 2.000 in x (The change in x is sometimes referred to as "RUN") we get a change of 1.000 - (-13.000) = 14.000 in y. (The change in y is sometimes referred to as "RISE" and the Slope is m = RISE / RUN)

   Slope     = 14.000/2.000 =  7.000

As seen below.

 x-intercept = 13/7  =  1.85714

slope =  14000/2000 = 7000

x intercept =  13/7 = 1.85714

y intercept = 13/1 = 13.00000

Answer:

3179.25

Step-by-step explanation:

Hello!

To find the volume of a cylinder we use the equation

[tex]V = \pi r^{2} h[/tex]

V is volume

r is radius

h is height

Put in what we know. It is says to use pi as 3.14

[tex]V = 3.14 * 7.5^{2} *18[/tex]

Solve

V = 3.14 * 56.25 * 18

V = 3179.25

Hope this Helps!

Answer: 512 cm³

Explanation: Since the length, width, and height of a cube are all equal,

we can find the volume of a cube by multiplying side × side × side.

So we can find the volume of a cube using the formula v = s³.

In the cube in this problem, we have a side length of 8 cm.

So plugging into the formula, we have (8 cm)³

or (8 cm)(8 cm)(8 cm), which is 512 cm³.

So the volume of the cube is 512 cm³.

Answer:512[tex]cm^{3}[/tex]

Step-by-step explanation:

All sides are equal. Hence, volume =[tex]l^{3} = 8^{3} =512cm^{3}[/tex]

Step-by-step explanation:

ANSWER:(2x+2,y)

Answer:

6h + 12 = 30

Step-by-step explanation:

Hence, the equation obtained for number of hours worked is given as  12 + 6h = 30.

A linear equation for the given case can be written by assuming any variable as the unknown quantity. Then, as per the given data the required operations are done and it is equated to some value.

The total money required is given as $30.

Suppose the number of hours for babysitting be h.

Then, the money earned by doing it is $6h.

And, the total money with Karl is 12 + 6h.

As per the question, the following equations can be written as,

12 + 6h = 30

Hence, the equation for finding the number of hours is given as 12 + 6h = 30.

To know more about linear equation click on,

https://brainly.com/question/11897796

#SPJ2

Answer:

b

Step-by-step explanation:

b is  correct.

Answer:

the interest is 195dollars

Answer:

The first pyramid:

      63x

  39x  24x  

23x  16x  8x

The second pyramid:

     162x

 82x  80x  

4x  78x  2x

The third pyramid:

     12a+2b

9a+b   3a+b  

9a     b     3a

The fourth pyramid:

      -19a

  -5a   -14a  

3a   -8a  -6a

Step-by-step explanation:

All that an alegbra pyramid is is adding the two terms below it.

So you can see how I added the terms that lied below each number, such as in number 1:  I added 23x and 16x to get me 39x, and I added 16x and 8x to get me 24.

Hope this helped!

[tex]\bold{\text{Answer:}\quad R(t)=-0.96\sin\bigg(\dfrac{\pi}{182.5}t}\bigg)+2.3}[/tex]

Step-by-step explanation:

The equation of a sin function is: y = A sin (Bx - C) + D     where

D = 2.3

It is given that t = 0 is located at 2.30.  The sin graph usually starts at 0 so the graph has shifted up 2.3 units.  --> D = 2.3

A = -0.96

The amplitude is the difference between the maximum (or minimum) and the centerline.  A = 2.30 - 1.44 = 0.96

The minimum is given as the next point. Since the graph usually has the next point as its maximum, this is a reflection so the equation will start with a negative. A = -0.96

B = π/182.5

It is given that [tex]\frac{1}{4}[/tex] Period = 91.25  --> P = 365

B = 2π/P

  = 2π/365

  = π/182.5

C = 0

No phase shift is given so C = 0

Input A, B, C, & D into the equation of a sin function:

[tex]R(t)=-0.96\sin\bigg(\dfrac{\pi}{182.5}t-0}\bigg)+2.3[/tex]