Read the chemical equation. Mg + 2HCl → MgCl2 + H2 How many moles of MgCl2 are produced from 1 mole of HCl? 0.2 0.5 1.0 1.5

Answer:

[tex]Zn(s) + 2H+(aq)\Rightarrow Zn^{2+}(aq) + H_{2}(g)[/tex]

Explanation:

Given that,

Anode : Zn electrode in a solution of 0.050 M Zn(NO₃)₂

Cathode : Pt electrode with 0.500 atm H₂(g) in 0.010 M HNO₃

Anode :

[tex]Zn(s)\Rightarrow Zn^{2+}(aq) + 2e^{-}[/tex]

Cathode :

[tex]2H+(aq)+2e^{-}\Rightarrow H_{2}(g)[/tex]

We need to write the overall balanced cell reaction

Using anode and cathode

[tex]Zn(s) + 2H+(aq)\Rightarrow Zn^{2+}(aq) + H_{2}(g)[/tex]

Hence, This is required answer.

Answer:

It has denatured

Explanation:

When the temperature get high the enzymes tend to change shape and denaturing occurs.

Answer:

D) 152 g

Explanation:

a mass of 1 mol Cr2O3 = 2 × 52 + 3 × 16 = 152 g number of moles of Cr2O3.

Answer:

Zinc- anode

Copper- cathode

Sodium sulphate- salt bridge

Explanation:

A galvanic cell is an electrochemical cell in which electrical energy is produced by a spontaneous chemical reaction.

In the pictured galvanic cell, zinc is the anode since it looses electrons according to the reaction; Zn(s) -----> Zn^2+(aq) + 2e

Copper is the cathode as shown here; Cu^2+(aq) + 2e ----> Cu(s)

Sodium sulphate functions as the salt bridge. It keeps the both solutions neutral by ensuring charge balance in the both half cells.

Answer:

zinc=anode

copper=cathode

Explanation:

Answer:

Explanation:

[tex]H_3O^+[/tex] also known as hydronium ion is formed as a result of the reaction between an hydrogen proton and a water molecules.

i.e [tex]\mathtt{H^+ + H_2O \to H_3O^+}[/tex]

(molecular geometry for the hydronium ion shows that the lewis structure of hydronium ion possess a three hydrogen ion bonded to a central atom known as oxygen. The oxygen possess a lone pair with a positive ion. So we have three hydrogen atoms and a lone pair attached to the oxygen. We can now say that there are four groups as the steric number in which one of them is a lone pair. This give rise to the trigonal pyramidal shape of the [tex]H_3O^+[/tex] (hydronium ion) with a bond angle of about 109,5°

Similarly, [tex]NH_3[/tex] on the other hand also known as ammonia has a shape that can be also determined by the Lewis structure.

IN ammonia,  there are three hydrogen  and a lone pairs of electron spreading out as far away from each other  from the centre nitrogen. In essence, the valence shell electron pair around hydrogens tend to repel each other. Hence, giving it a trigonal pyramidal shape.

From above the similarities between H3O and NH3 is in their molecular geometry in which both  H3O and NH3 have the same shape.

These molecules are called isoelectronic. Why?

Isoelectronic molecules are molecules having the same number of electrons and same electronic configuration  structure. As a result H3O and NH3 possess the same  number of electrons in the same orbitals and they also posses the same structure.

Answer:

1 ethanol is right answer

Explanation:

CH3- CH2-OH

Answer:

yes it is corrwect iyt is absolitle correct

Explanation:

Answer:

323 K

Explanation:

Since it is in equilibrium, we get  Δ=0=Δ−Δ

                                                      Δ=Δ

                                                      =ΔΔ

Now we solve for T

T = ( -28.4 kJ) / (-87.9 J/K * 1kJ/1000J) = 323 K

Based on the fact that there is very little change in value with temperature, the temperature that the reaction changes to spontaneous would be 323.1K.

This can be found as:

ΔH∘ = Temperature x  ΔS∘

Temperture = ΔH∘ /  ΔS∘

Solving gives:

= - 28.4 / - 87.9

= 323.1 k

Find out more on spontaneous reactions at https://brainly.com/question/13700386.

#SPJ2

Answer:

4.16x10⁻³m

Explanation:

Molality is defined as the ratio between moles of a solute, in this case glucose, and kg of solvent.

As there are 100g of solvent, the kg are 0.1. Thus, we only need to calculate from the mass of glucose its moles to solve the molality of the solution.

Moles glucose:

There are 75mg = 0.075g of glucose. To conver mass to moles it is necessary molar mass.

Molar mass glucose:

6C = 12.01g/mol*6 = 72.06g/mol

12H = 12*1.008g/mol = 12.10g/mol

6O = 6*16g/mol = 96g/mol

72.06 + 12.10 + 96 = 180.16g/mol

Moles of 0.075g of glucose:

0.075g * (1 mol / 180.16g) =

4.16x10⁻⁴ moles of glucose

Molality of the solution:

4.16x10⁻⁴ moles of glucose / 0.1kg of solvent =

The molarity of the solution is 4.16x10⁻³m

We know that the molarity refers to the ratio that arise between the moles of a solute.

Since there are 100 g of solvent so here the kg should be 0.1.

Likewise there is 75 mg so it should be 0.075g

Now the Molar mass glucose should be

6C = 12.01g/mol*6 = 72.06g/mol

12H = 12*1.008g/mol = 12.10g/mol

6O = 6*16g/mol = 96g/mol

So,

= 72.06 + 12.10 + 96

= 180.16g/mol

Now

Moles of 0.075g of glucose:

0.075g * (1 mol / 180.16g) =

4.16x10⁻⁴ moles of glucose

Now finally

Molality of the solution:

= 4.16x10⁻⁴ moles of glucose / 0.1kg of solvent

=4.16x10⁻³m

learn more about molarity here: https://brainly.com/question/13011592

Answer:

pH of the buffer is 3.75

Explanation:

It is possible to find pH of a buffer using Hendersson-Hasselbalch equation:

pH = pKa + log [A⁻] / [HA]

Where [A⁻] is molar concentration of the conjugate base and [HA] concentration of the weak acid

In the lactic buffer, pKa = 3.86. Lactic acid is the weak acid and its conjugate base is tha lactate salt. H-H equation for this buffer is:

pH = 3.86 + log [Lactate] / [Lactic acid]

Replacing with the concentrations of the problem:

pH = 3.86 + log [0.10M] / [0.13M]

pH = 3.75

Answer:

The sun

Explanation:

The sun is the primary source of energy in most living communities. The producers or the green plants that prepare their own food by the use of sunlight and other natural resources. Carbon dioxide, water, and other minerals are used by the plants to make their food in the presence of chlorophyll. Plants are then consumed by the consumers. This chain helps in forming the food chain and the food web.

Answer:

main asteroid belt separates the inner planets from the outer planets

Answer:

A. Rank the following substances in order of decreasing standard molar entropy (S∘).

Rank the gases from largest to smallest standard molar entropy

I2(g)>Br2(g)>Cl2(g)>F2(g)

B. Rank the gases from largest to smallest standard molar entropy. To rank items as equivalent, overlap them.

H2O2(g)>H2S(g) >H2O(g)

C. Rank the gases from largest to smallest standard molar entropy. To rank items as equivalent, overlap them.

C(s, amorphous) >C(s, graphite)>C(s, diamond)

Explanation:

Hello,

In this case, we can apply the following principles to explain the order:

- The greater the molar mass, the larger the standard molar entropy.

- The greater the molar mass and the structural complexity, the larger the standard molar entropy.

- The greater the structural complexity, the larger the standard molar entropy.

A. Rank the following substances in order of decreasing standard molar entropy (S∘).

Rank the gases from largest to smallest standard molar entropy

I2(g)>Br2(g)>Cl2(g)>F2(g)

This is due to the fact that the greater the molar mass, the larger the standard molar entropy.

B. Rank the gases from largest to smallest standard molar entropy. To rank items as equivalent, overlap them.

H2O2(g)>H2S(g) >H2O(g)

This is due to the fact that the greater the molar mass and the structural complexity, the larger the standard molar entropy as the hydrogen peroxide has four bonds and weights 34 g/mol as well as hydrogen sulfide that has two bonds only.

C. Rank the gases from largest to smallest standard molar entropy. To rank items as equivalent, overlap them.

C(s, amorphous) >C(s, graphite)>C(s, diamond)

Since the molecular complexity is greater in the amorphous carbon (messy arrangement), mid in the graphite and lower in the diamond (well organized).

Regards.

Answer:

K2CO3  and NaF

Explanation:

In order to ascertain which salt would form a basic solution we have to identify the classification of each of the salts.

- NH4Br: is the salt of a weak base (NH3) and a strong acid (HBr). This means that it would form an acidic solution.

- Pb(NO3): This is a normal salt, hence would not form a basic solution.

-  K2CO3: This is salt that forms a strongly alkaline/basic solution.

- NaF: it is the salt of a strong base, NaOH, and a weak acid, HF. This means this would form a basic solution.

The compounds capable to form basic solutions are[tex]\rm \bold {K_2CO_3 }[/tex] and NaF. Thus, options C and D are correct.

The basic solution has been given with the presence of a high number of hydroxide ions, while the acidic solution has been the presence of hydrogen ions.

The solution has been considered as basic when the compound has been constituted of a strong base. The constituents of the following compounds have been:

The compounds capable to form basic solutions are[tex]\rm \bold {K_2CO_3 }[/tex] and NaF. Thus, options C and D are correct.

For more information about the basic solution, refer to the link:

https://brainly.com/question/3595168

Answer:

The mass of ammonium phosphate produced is 14.3g

Explanation:

Full question contains: "What mass of ammonium phosphate is produced by the reaction of 4.9g of ammonia"

Ammonium phosphate ((NH₄)₃PO₄) can be produced by the reaction of phosphoric acid (H₃PO₄) with ammonia (NH₃) as follows:

H₃PO₄ + 3NH₃ → (NH₄)₃PO₄

Where 1 mole of phosphoric acid reacts with 3 moles of ammonia producing 1 mole of ammonium phosphate.

To know how many grams of ammonium phosphate we need to find moles of ammonia that react, and, with the chemical equation we can find moles of ammonium phosphate and its mass as follows:

Moles ammonia (Molar mass: 17.031g/mol):

4.9g × (1mol / 17.031g) = 0.288 moles of ammonia you have in 4.9g

Moles of ammonium phosphate (149.09g/mol) and its mass:

As 0.288 moles of NH₃ are reacting and 3 moles of ammonia produce 1 mole of ammonium phosphate, moles produced are:

Moles (NH₄)₃PO₄:

0.288 moles NH₃ ₓ (1 mol (NH₄)₃PO₄  / 3 mol NH₃) = 0.0959 moles (NH₄)₃PO₄

These moles are, in grams:

0.0959 moles (NH₄)₃PO₄ ₓ (149.09g / mol) = 14.3g ammonium phosphate.

Answer:

[tex]\large \boxed{\text{0.57 g/mL; 3.7 mL; 6.6 g; 0.366 g/mL}}[/tex]

Explanation:

1. Density from mass and volume

[tex]\text{Density} = \dfrac{\text{mass}}{\text{volume}}\\\\\rho = \dfrac{m}{V}\\\\\rho = \dfrac{\text{8.6 g}}{\text{15 mL}} = \text{0.57 g/mL}\\\text{The density is $\large \boxed{\textbf{0.57 g/mL}}$}[/tex]

2. Volume from density and mass

[tex]V = \text{9.7 g}\times\dfrac{\text{1 mL}}{\text{2.6 g}} = \text{3.7 mL}\\\\\text{The volume is $\large \boxed{\textbf{3.7 mL}}$}[/tex]

3. Mass from density and volume

[tex]\text{Mass} = \text{4.1 cm}^{3} \times \dfrac{\text{1.6 g}}{\text{1 cm}^{3}} = \textbf{6.6 g}\\\\\text{The mass is $\large \boxed{\textbf{6.6 g}}$}[/tex]

4. Density by displacement

Volume of water + object = 24.6 mL

Volume of water                = 12.8 mL

Volume of object               = 11.8 mL

[tex]\rho = \dfrac{\text{4.3 g}}{\text{11.8 mL}} = \text{0.36 g/mL}\\\text{The density is $\large \boxed{\textbf{0.36 g/mL}}$}[/tex]

Your drawing showing water displacement using a graduated cylinder should resemble the figure below.

Answer:

The length the divider is to  equilibrium from Part A = 1.30 m and from Part B = 3.70 m

Explanation:

Given that:

A rectangular cube with 3.2 m breadth, 1.2 m height and 5 m in length is splitted into two parts.

The diagrammatic expression for the above statement can be found in the attached diagram below.

The container has a movable airtight divider that divides its length as necessary.

Part A has 58 moles of gas

Part B has 165 moles of a gas.

Thus, the movable airtight divider will stop at a length where the pressure on it is equal on both sides.

i.e

[tex]\mathtt{P = P_A = P_B}[/tex]

Using the ideal gas equation,

PV = nRT

where, P,R,and  T are constant.

Then :

[tex]\mathsf{\dfrac{V_A}{n_A}= \dfrac{V_B}{n_B}}[/tex]

[tex]\mathsf{\dfrac{L_A \times B \times H}{n_A}= \dfrac{L_B \times B \times H}{n_B}}[/tex] --- (1)

since Volume of a cube = L × B × H

From the question; the L = 5m

i,e

[tex]\mathsf{L_A +L_B}[/tex] = 5

[tex]\mathsf{L_A = 5 - L_B}[/tex]

From equation (1) , we divide both sides by (B × H)

Then :

[tex]\mathsf{\dfrac{L_A }{n_A}= \dfrac{L_B }{n_B}}[/tex]

[tex]\mathsf{\dfrac{5-L_B}{58}= \dfrac{L_B }{165}}[/tex]

By cross multiplying; we have:

165 ( 5 - [tex]\mathsf{L_B}[/tex] )  = 58 (

825 - 165[tex]\mathsf{L_B}[/tex]  = 58

825 = 165[tex]\mathsf{L_B}[/tex] +58

825 = 223[tex]\mathsf{L_B}[/tex]

[tex]\mathsf{L_B}[/tex] = 825/223

[tex]\mathsf{L_B}[/tex]  = 3.70 m

[tex]\mathsf{L_A = 5 - L_B}[/tex]

[tex]\mathsf{L_A = 5 - 3.70}[/tex]

[tex]\mathsf{ L_A}[/tex] = 1.30 m

The length the divider is to  equilibrium from Part A = 1.30 m and from Part B = 3.70 m

C₆H₁₂O₆ is the molecular formula of gulcozo.

Answer:

Mg+F2= Mgf2

Explanation:

F 2 is an oxidizing agent, Mg is a reducing agent. ; Pale-yellow to greenish gas with a pungent, irritating odor.

Answer:

a. Ca₃(PO₄)₂.

b. 0.010 moles of Ca₃(PO₄)₂ can we expect to be produced

c. 3.1g of Ca₃(PO₄)₂

d. Percent yield = 93.5%

Explanation:

a. Based on the reaction:

3Ca(NO₃)₂(aq) + 2Na₃PO₄(aq) → Ca₃(PO₄)₂(s) + 6NaNO₃(aq)

3 moles of calcium nitrate reacts with 2 moles of sodium phosphate producieng 1 mole of calcium phosphate.

As you can see, Ca₃(PO₄)₂ is a solid product -(s)-, that means when the reaction occurs the precipitate produced is the solid,

b. As 3 moles of calcium nitrate produce 1 mole of calcium phosphate and there are 0.030 moles of calcium nitrate

0.030 moles Ca(NO₃)₂ × (1 mol Ca₃(PO₄)₂ / 3 moles Ca(NO₃)₂) =

c. As molar mass of Ca₃(PO₄)₂ is 310.18g/mol, the mass of 0.010 moles (The expected mass) is;

0.010 moles Ca₃(PO₄)₂ × (310.18g / mol) =

d. The percent yield is defined as 100 times the ratio between the obtained yield (That is 2.9g of precipitate, Ca₃(PO₄)₂) and the expected yield, 3.1g of Ca₃(PO₄)₂:

[tex]\frac{2.9g}{3.1g} *100[/tex]

(a) The product in solid state would be the precipitate. Hence, the precipitate would be Ca3(PO4)2

(b) From the balanced equation of the reaction: 3 moles of Ca(NO3)2 is required for 1 mole of Ca3(PO4)2

If there are just 0.030 moles of Ca(NO3)2, then"

3 moles = 1

0.030 moles =    1 x 0.030/3

                         = 0.01 moles of Ca3(PO4)2

In other words, 0.01 moles of the precipitate would be expected to be produced from 0.030 moles of calcium nitrate.

(c) 0.01 moles solid (Ca3(PO4)2) is expected. Mass of Ca3(PO4)2 expected:

      mass   = mole x molar mass

molar mass of Ca3(PO4)2 = 310.18 g/mol

mass of Ca3(PO4)2 expected to be produced = 0.01 x 310.18

                                                                       = 3.1018 g

Hence, 3.1018g of solid is expected to be produced.

(d) Percentage yield = actual yield/theoretical yield x 100

                          = 2.9/3.1018 x 100

                               = 93.5%

More on precipitation reaction can be found here:  https://brainly.com/question/24158764

Answer:

CHC12

Explanation:

i am not really sure i am onna do a quick research 4 u tho

Answer:

2Cl——>Cl2+2e-

Explanation:

It shows an electron loss or gain

Answer:

ch3:-methanide

No2:-nitrogen dioxide

thank you and mark as brainliest if u find it helpful

Answer:

+ small

Explanation:

The entropy is obtained from;

∆S= ∆H/T

Where;

∆S= entropy of the system

∆H= enthalpy if the system = +23.7 KJ

T= absolute temperature of the system = 390 K

∆S= 23.7 ×10^3/390 = 60.8 JK^-

There is a small positive change in entropy.

Answer:

I think tube like ... is it right

Answer:

The actual answer is flowers have heart like structures that transport nutrients and water with in the plants.

Answer:

THE VOLUME OF THE OXYGEN GAS AFTER DEFLATION TILL A PRESSURE OF 735 TORR IS ATTAINED IS 7836.99 L

Explanation:

Using Boyle's law,

P1V1 = P2V2

P1 = 150 atm

V1 = 50 L

P2 = 735 Torr

V2 = unknown

We must first convert the pressures into the same SI unit for easy calculation

1torr = 1/760 atm

So converting 735 torr to atm; we have:

1 torr = 1/ 760 atm

735 torr = 735 * 1 / 760 atm

= 0.967 atm

In other words, P2 = 0.957 atm

So rearranging the formula by making V2 the subject of the equation, we have:

V2 = P1 V1 / P2

V2 = 150 * 50 / 0.957

V2 = 7836.99 L

The volume of the oxygen cylinder after deflation to a final pressure of 735 torr or 0.967 atm pressure is 7836.99 L.

2.96 × 10²³ molecules is required if Alex drips hydrochloric acid onto a 5.9 g piece of magnesium in a single displacement reaction

According to this question, hydrochloric acid (HCl) reacts with magnesium metal (Mg) to produce magnesium chloride and hydrogen has as follows:

2HCl(aq) + Mg(s) → MgCl2(aq) + H2(g)

Where; Mg = 24g/mol

mole = 5.9/24

mole = 0.246mol of Mg

To convert mole to number of molecules, we multiply number of moles by 6.02 × 10²³ (Avogadro's no.)

Hence, number of molecules of HCl required is 0.492mol × 6.02 × 10²³

= 2.96 × 10²³ molecules of HClHCl

Learn more: https://brainly.com/question/14948089

Answer:12.9e-12g or in short 12.9pg

Explanation:as p=1e-12

Answer:

Explanation:

hope this helps you

The mass of the marble is greater than that of the water. The marble weighs more than an equivalent volume of the water. The force from dropping the marble breaks the surface tension of the water. The marble has greater mass and volume than the water.