Sarai strolls to the right with an average speed of 1.2m/s for 1500 seconds. What was Sarai's displacement in meters?

Answer:

Solution ( for fourth attachment ) : 38°C

Tip : Remember the units °C when submitting answer

Explanation:

As you mentioned, we only need the solution for the fourth attachment.

The idea here is that the heat lost by the metal will be equal to the heat gained by the water. We know that the specific heat gained or lost will always be represented by the following formula,

q = m [tex]*[/tex] c

Therefore if we substitute the know values and equate the two equations knowing that " q " is common among them --- ( 1 )

0.33 [tex]*[/tex] 448

Remember that the change in temperature of iron (ΔT) would be represented by final temperature - initial temperature, or final temperature - 693. Similarly the change in temperature of water will be final temperature - 39. Now we can pose the final temperature as a, and solve for a through substitution --- ( 2 )

0.33 [tex]*[/tex] 448

From here on take a look at the attachment. It represents how to receive get a through simple algebra. Here a, the final temperature, is about 38°C. In exact terms it will be [tex]38.03617\dots[/tex]°C.

Answer: Efficiency signifies a peak level of performance that uses the least amount of inputs to achieve the highest amount of output.

Explanation: It minimizes the waste of resources such as physical materials, energy, and time while accomplishing the desired output.

Answer:

The efficiency of a simple machine is defined as the ratio of useful work done by the machine ( output work) to the total work out into the machine ( input work).

Explanation:

If a machine overcomes a load ' L ' and the distance travelled by the load is 'Ld' , the work done by the load is L× LD. It is also called output work or useful work.

Therefore, [tex] \boxed{Output \: work \: = L \: \times \: Ld}[/tex]

Likewise, The effort applied to overcome the load is 'E' and the distance covered by effort is 'Ed' , the work done by effort is E × Ed. It is also called input work.

Therefore, [tex] \boxed{Input \: work = E \times Ed}[/tex]

The efficiency of a simple machine is defined as the ratio of output work to the input work .

Therefore, [tex] \boxed{Efficiency ( η)= \frac{outpt \: work}{input \: work} \times 100\%}[/tex]

Efficiency is expressed in percentage. It is a ratio of two works. A machine is never 100% efficient. It is because no machine is friction free and due to friction, some of the input energy is wastes in the form of heat energy.

[tex] \mathrm{Hope \: I \: helped!}[/tex]

[tex] \mathrm{Best \: regards!}[/tex]

Answer:

What separates athletes from their competitors is the word itself, separation — gaining it on the offensive side, or taking it away on the defensive side (There are exceptions of course, one being the contest of offensive linemen and defensive linemen in football where the inverse is true). Speed, strength, and power are great ways to create separation in sports. However, speed, strength, and power all have genetic ceilings

Answer:

The correct option is;

Industrial organizational psychologist

Explanation:

Industrial organizational psychology is a branch of the study of psychology that looks into the application of psychological principles and theories in industrial and organizational settings.

An industrial organizational psychologist provide support to organizations such analyzing orientation and behavior, assessment of the organization, training company personnel on how to be or become a good leader, design and development of organizational products , analysis of customer choices, the satisfaction of the customers, and the strategy the organization follows in marketing of their products such as to increase awareness and understanding of human behavior in a workplace setting.

Answer:

B. 0.2 J/g/°C

Explanation:

The solid phase is the first segment (from 0°C to 50°C).

q = mCΔT

200 J = (20 g) C (50°C)

C = 0.2 J/g/°C

Answer:

Explanation:

Heat is transferred in the following ways listed below

1. Conduction(Through direct contact of particles )

2. Convection(Through motion of hot and cold liquid )

3. Radiation(Through electromagnetic waves Through the rising of a warm gas )

1. Conduction: This has to do with the transfer of heat from one medium to another having direct contact with each other, the medium can either be solid or liquids

2. Convection: Has to do with the transfer of heat energy via molecules of the liquids in motion with different or varying temperature gradients

3. Radiation: Mostly occurs in gases, it is the transfer of energy through waves

Answer:

22.2 m/s or 80 km/h

Explanation:

Given that

Distance travelled by the car, d = 240 km

Time taken by the car, t = 3 hours.

Speed of the car, v = ? m/s

for easy calculations, we will be converting the units to meters and seconds respectively.

240 km to meters would be

240 * 1000 m = 240000 m

3 hrs to seconds would be

3 * 60 mins * 60 seconds = 10800 s

now, we have our distance and time to be

d = 240000 m

t = 10800 s

speed is defined as the ratio of distance with respect to time taken, effectively,

Speed = distance/time

speed, v= 240000 / 10800

v = 22.2 m/s

therefore, the speed of the car during the time is 22.2 m/s, or if the speed is needed in km/h, we can convert it

22.2 * 3600/1000 =

80 km/h

Answer:

Iron expands because heating increases the space between the molecules

Explanation:

According to the kinetic molecular theory, all matter is composed of atoms and molecules which are in constant motion.

When a substance is heated, molecules of the substance begin to vibrate faster. This faster vibration leads to increased space between the molecules (expansion) . The kind of motion motion and degree of spacing of the molecules determine the state of matter in which the substance is found.

Hence, when an iron bar is heated, it expands due to increased motion of its molecules leading to spaces between them.

Answer:

Explanation:

Gravitational force is important because:

1.  because of the gravitational force of the earth, the atmosphere is present around its surface, which is crucial for sustainability of life on earth

2. we are able to perform motion due to the force of gravity

Answer:

Fuel + O2 → CO2 + H2O

Explanation:

Answer:

the pendulum differs from 300 inches

realtion between applied force.and pressure is more force exerts more pressure whereas less force exerts less pressure

confused in another one

Answer:

See below

Explanation:

1) Applied Force and Pressure

Pressure = Force / Area

This shows that Applied force and pressure are in direct relationship. This means that If the Applied force is more, the Pressure is also More and vice versa.

2) Surface Area of Contact and Pressure

Pressure = Force / Surface Area of Contact

This shows that Pressure and Surface area of contact are inversely related. This means that if pressure is increased on an object, the surface area of contact decreases and vice versa.

Answer:

football

Explanation:

I took the 2.10 quiz and got it wrong so it must be football

Answer:

degrees

Explanation:

If a direction is somewhere between north and east, it is measured in degrees.

This measurement will be possible thanks to the existence of geographical coordinates that are some 'imaginary lines' that help us find our location on the earth's surface. These lines are called latitude and longitude, both of which are measured in degrees.

It is like a sea battle game where you have to combine the rows and columns in order to identify where the targets are located. Geographic coordinates work the same way, you must combine the rows and columns of the planisphere to identify the locations of the planet. So the lines would be the latitudes and the columns the longitudes.

Answer:

According to Arrhenius definition, an acid is a substance that releases hydrogen ion or hydronium ion.

there are also other definition like bronsted and lewis.

I HOPE IT WILL HELP

Answer:

If max height = 1.1 meters, then initial velocity is 3.28 m/s

If max height is 1.1 feet, then the initial velocity is 5.93  ft/s

Explanation:

Recall the formulas for vertical motion under the acceleration of gravity;

for the vertical velocity of the object we have

[tex]v=v_0-g \,t[/tex]

for the object's vertical displacement we have

[tex]y-y_0=v_0\,t - \frac{g}{2} \,t^2[/tex]

If the maximum height reached by the object is given in meters, we use the value for g in [tex]m/s^2[/tex] which is: [tex]9.8\,\,m/s^2[/tex]

If the maximum height of the object is given in feet, we use the value for g in  [tex]ft/s^2[/tex]  which is : [tex]32\,\,ft/s^2[/tex]

Now, when the ball reaches its maximum height, the ball's velocity is zero, so that allows us to solve for the time (t) the process of reaching the max height takes:

[tex]v=v_0-g \,t\\0=v_0-g \,t\\g\,\,t=v_0\\t=\frac{v_0}{g}[/tex]

and now we use this to express the maximum height in the second equation we typed:

[tex]y-y_0=v_0\,t - \frac{g}{2} \,t^2\\max\,height=v_0\,(\frac{v_0}{g}) - \frac{g}{2} \,(\frac{v_0}{g})^2\\max\,height= \frac{v_0^2}{2\,g}[/tex]

Then if the max height is 1.1 meters, we use the following formula to solve for [tex]v_0[/tex]:

[tex]1.1= \frac{v_0^2}{2\,9.8}\\(9.8)\,(1.1)=v_0^2\\v_0=10.78\\v_0=\sqrt{10.78} \\v_0=3.28\,\,m/s[/tex]

If the max height is 1.1 feet, we use the following formula to solve for [tex]v_0[/tex]:

[tex]1.1= \frac{v_0^2}{2\,32}\\(32)\,(1.1)=v_0^2\\v_0=35.2\\v_0=\sqrt{35.2} \\v_0=5.93\,\,ft/s[/tex]

Answer:

11

Explanation:

for khan academy, this is the answer

Answer:

From the graph, at t = 5 seconds, the velocity = 50 m/s as shown also in the above table

Please find attached the graph

Explanation:

The initial velocity of the body =  m/s

The acceleration of the body = 8 m/s²

The velocity after 5 seconds can be determined graphically and by calculation as follows;

Graphically, we have the data points which can be found by the straight line relation  v = u + a×t,

Where ,

a = The slope = 8 m/s²

u = 10 m/s = The y-intercept

Which gives;

v = 10 + 8 × t

The following data can be calculated for various time t;

Time, t     Velocity , v

0,             10

1,              18

2,             26

3,             34

4,             42

5,             50

6,             58

From the graph, at t = 5 seconds, the velocity = 50 m/s as shown also in the above table

Please find attached the graph

By calculation, we have;

v = u + a×t

Where;

v = The final velocity

u = The initial velocity = 10 m/s

a = The acceleration = 8 m/s²

t = The time = 5 seconds

v = 10 + 5× 8 = 50 m/s.

Answer:

lathe

perfectly symmetrical

Answer: A lathe is used to turn wood . It rotates and carves wood to produce a perfectly symmetrical form .

First one is lathe .

Second one is perfectly symmetrical .

Explanation: I just took the test on Plato and had 100%

Answer:

Hey there!

Mixtures are physically combined and can be separated. For example, sand and water is a mixture.

Pure substances are samples of matter with definite, and unchangeable chemical properties. For example, diamond is a pure substance.

Let me know if this helps :)

a pure substance is a substance that has not been mixed with anything, a mixture has been mixed with another substance. an example is

dirt +water=mud iron is an example of a substance

Answer:

1. direction of propagation of sound

2.medium through which sound trsnsmitted

Answer:

The correct answer is

Explanation:

Character 1: Why are these comic books so hard to read? Can u read them?

Character 2: No it's easy to read Tigger. It's because you are an animal an I am a human being. U don't know how to read.

Hope this helps....

Have a nice day!!!!

Answer:

Dialogue 1:

Hey buddy! Can you tell me what is written in this book? Its really hard to read:(

Dialogue 2:

Yeah! Its a story about a friendly tiger! And it is hard for you to read cause you don't know how to read.

Tip:

Try to make it more engaging  :)

Answer:CcCcccccc

Explanation:

Rfsgqh

Answer:

Unconscious wish fulfillment

Explanation:

Unconscious wish fulfillment

(In the unconscious wish fulfillment theory, the actual wishes of the dreamer that are threatening to the dreamer's conscious awareness are disguised.)

Answer:

The energy that can be stored in the capacitor is 239 nJ

Explanation:

We first calculate the capacitance of each material. Let C₁ be the capacitance of pyrex glass and C₂ be the capacitance of polystyrene.

C₁ = κ₁ε₀A/d where κ₁ = dielectric constant of pyrex glass = 5, A = area of plates = L² where L = length of square plate = 7.40 cm = 7.40 × 10⁻² m and d = thickness of pyrex slab = 1.60 mm = 1.60 × 10⁻³ m and ε₀ = permittivity of free space = 8.854 × 10⁻¹² F/m

C₁ = κ₁ε₀A/d = κ₁ε₀L²/d = 5 × 8.854 × 10⁻¹² F/m × (7.40 × 10⁻² m)²/1.60 × 10⁻³ m = 2424.2252/1.60 × 10⁻¹¹ F = 1515.14 × 10⁻¹¹ F = 15.2 × 10⁻⁹ F = 15.2 nF

C₂ = κ₂ε₀A/d where κ₂ = dielectric constant of polystyrene = 3, A = area of plates = L² where L = length of square plate = 7.40 cm = 7.40 × 10⁻² m and d = thickness of polystyrene slab = 1.60 mm = 1.60 × 10⁻³ m and ε₀ = permittivity of free space = 8.854 × 10⁻¹² F/m

C₁ = κ₁ε₀A/d = κ₁ε₀L²/d = 3 × 8.854 × 10⁻¹² F/m × (7.40 × 10⁻² m)²/1.60 × 10⁻³ m = 1454.5351/1.60 × 10⁻¹¹ F = 909.08 × 10⁻¹¹ F = 9.09 × 10⁻⁹ F = 9.09 nF

Since the capacitors are in series, we find their effective capacitance C from

1/C = 1/C₁ + 1/C₂

C = C₁C₂/(C₁ + C₂)

= 15.2 × 10⁻⁹ F × 9.09 × 10⁻⁹ F/(15.2 × 10⁻⁹ F + 9.09 × 10⁻⁹ F)

= 138.168 × 10⁻¹⁸/24.29 × 10⁻⁹ F

= 5.69 × 10⁻⁹ F

The amount of electrical energy stored in a capacitor is given by W = 1/2CV² where C = capacitance and v = voltage applied. Now C = 5.69 × 10⁻⁹ F and V = 84.0 V for this capacitor

So W = 1/2 × 5.69 × 10⁻⁹ F × 84.0 V

= 238.98 × 10⁻⁹ J

≅ 239 × 10⁻⁹ J

= 239 nJ

So the energy that can be stored in the capacitor is 239 nJ

Answer:

Therefore the laws of physics are the same for the two observers, whoever is standing under the tree observes a vertical movement of free fall.

The person who is running observes a movement parabolic

Explanation:

To answer this question we must establish that as two people have inertial reference systems from which to make their observations, the inertial systems are systems with constant velocity.

Therefore the laws of physics are the same for the two observers, whoever is standing under the tree observes a vertical movement of free fall.

The person who is running observes a movement parabolic composed of the vertical movement and horizontal movement ladies go running, therefore it is a parabolic movement

Traslate

Para responder eta pregunta debemos establecer que as dos personas tiene sistema de referencia inerciales de des donde realizar sus observación, los sistema inerciales son sistema con velocidad constante.

Por lo tanto las leyes de la fisica son la misma para los dos observadores, el que esta parado bajo el árbol observa un movimiento vertical de caída libre.

La persona que va corriendo observa un movimiento compuesto por el movimiento vertical y damas movimiento horizontal ir corriendo, por lo cual es un movimiento parabólico

Answer:

Its inductance L = 166 mH

Explanation:

Since a current, I = 0.698 A is obtained when a voltage , V = 5.62 V is applied, the resistance of the coil is gotten from V = IR

R = V/I = 5.62/0.698 = 8.052 Ω

Since we have a current of I' = 0.36 A (rms) when a voltage of V' = 35.1 V (rms) is applied, the impedance Z of the coil is gotten from

V₀' = I₀'Z where V₀ = maximum voltage = √2V' and I₀ = maximum current = √2I'

Z = V'/I' = √2 × 35.1 V/√2 × 0.36 V = 97.5 Ω

WE now find the reactance X of the coil from

Z² = X² + R²

X = √(Z² - R²)

= √(97.5² - 8.05²)

= √(9506.25 - 64.8025)

= √9441.4475

= 97.17 Ω

Now, the reactance X = 2πfL where f = frequency of generator = 93.1 Hz and L = inductance of coil.

L = X/2πf

= 97.17/2π(93.1 Hz)

= 97.17 Ω/584.965 rad/s

= 0.166 H

= 166 mH

Its inductance L = 166 mH

Answer:

9 kg

Explanation:

Momentum is mass times velocity.

p = mv

36 kgm/s = m (4 m/s)

m = 9 kg

The mass of the bicycle is 9 kg.

The momentum of the bicycle is the product of mass and velocity of the bicycle.

P = mv

where;

m = P/v

m = 36/4

m = 9 kg

Thus, the mass of the bicycle is 9 kg.

Learn more about momentum here: https://brainly.com/question/7538238

Answer:

The maximum induced emf is 15.08 V

Explanation:

Given;

number of turns of the generator, N = 6 turns

area of the loop, A = 0.04 m

magnetic field of the loop, B = 0.2 T

frequency of loop, f = 50 Hz

The  maximum induced emf is given by;

E = NBAω

Where;

ω is the angular speed = 2πf

E = NBA(2πf)

E = 6 x 0.2 x 0.04 x (2 x 3.142 x 50)

E = 15.08 V

Therefore, the maximum induced emf is 15.08 V

Answer:

1) 20 m/s

2) 5 m/s

3) 2 m/s

4) 395,000m/9000s

5) 16 km/0.25h

Explanation:

i dunno

Answer:

If effort distance was 4 times, efficiency would be 100%.

Since it takes 5 times for effort distance, efficiency drops to output/input

output is 1*F

input is (1/4*F)*5

so: F/1/5*F/4 = 4F/5F = .8 or 80%

The efficiency of the lever is 80%.

To calculate the efficiency of the lever, we can use the formula for mechanical advantage and efficiency.

Mechanical Advantage (MA) is the ratio of the load (L) to the effort (E) in a lever system:

MA = Load / Effort

Given that the load is four times the effort applied:

Load = 4 * Effort

Also, the effort distance (dEffort) is five times the load distance (dLoad):

dEffort = 5 * dLoad

Now, we can write the formula for efficiency (η) of a lever system:

Efficiency (η) = (Mechanical Advantage / Ideal Mechanical Advantage) * 100%

The Ideal Mechanical Advantage (IMA) is the ratio of the effort distance to the load distance:

IMA = dEffort / dLoad

Substitute the given values into the IMA equation:

IMA = (5 * dLoad) / dLoad

IMA = 5

Now, we can calculate the Mechanical Advantage (MA) using the relationship between the load and effort:

MA = Load / Effort

MA = (4 * Effort) / Effort

MA = 4

Finally, we can calculate the efficiency (η):

Efficiency (η) = (Mechanical Advantage / Ideal Mechanical Advantage) * 100%

η = (4 / 5) * 100%

η = 0.8 * 100%

η = 80%

The efficiency of the lever is 80%.

To know more about efficiency here

https://brainly.com/question/31458903

#SPJ2