The gas with an initial volume of 24.0 L at a pressure of 565 torr is compressed until the volume is 16.0 L. What is the final pressure of the gas, assuming the temperature and amount of gas does not change

Answer:

Weight 0.4326 g of sodium bicarbonate and 0.5141 g of sodium carbonate, dissolve it in distilled water and then bring the solution to a final volume of 50.0 mL using distilled water.

Explanation:

The pH of a buffered solution can be calculated using the Henderson-Hasselbalch equation:

[tex] pH = pKa + log(\frac{[Na_{2}CO_{3}]}{[NaHCO_{3}]}) [/tex]  

We have that pH = 10.3 and the Ka is 4.7x10⁻¹¹, so:

[tex] 10.3 = -log(4.7 \cdot 10^{-11}) + log(\frac{[Na_{2}CO_{3}]}{[NaHCO_{3}]}) [/tex]  

[tex] \frac{[Na_{2}CO_{3}]}{[NaHCO_{3}]} = 0.94 [/tex]  (1)

Also, we know that:

[tex] [Na_{2}CO_{3}] + [NaHCO_{3}] = 0.20 M [/tex]    (2)

From equation (2) we have:

[tex] [Na_{2}CO_{3}] = 0.20 - [NaHCO_{3}] [/tex]   (3)

By entering (3) into (1):

[tex] \frac{0.20 - [NaHCO_{3}]}{[NaHCO_{3}]} = 0.94 [/tex]

[tex] 0.94*[NaHCO_{3}] + [NaHCO_{3}] = 0.20 [/tex]

[tex] [NaHCO_{3}] = 0.103 M [/tex]  

Hence, the [Na_{2}CO_{3}] is:

[tex] [Na_{2}CO_{3}] = 0.20 - [NaHCO_{3}] = 0.20 M - 0.103 M = 0.097 M [/tex]  

Now, having the concentrations and knowing the volume of the buffer solution we can find the mass of the sodium carbonate and the sodium bicarbonate, as follows:

[tex]m_{Na_{2}CO_{3}} = C*V*M = 0.097 mol/L*0.050 L*105.99 g/mol = 0.5141 g[/tex]

[tex]m_{NaHCO_{3}} = C*V*M = 0.103 mol/L*0.050 L*84.007 g/mol = 0.4326 g[/tex]

Therefore, to prepare 50.0 mL of a 0.20 M solution that is buffered to a pH of 10.3 we need to weight 0.4326 g of sodium bicarbonate and 0.5141 g of sodium carbonate, dissolve it in distilled water and then bring the solution to a final volume of 50.0 mL using distilled water.      

I hope it helps you!

Answer:

n = 0.207 mole

Explanation:

We have,

P = 1 atm

V = 5 liter

R = 0.0821 L.atm/mol.K

T = 293 K

We need to find the value of n. The relation is as follows :

PV = nRT

Solving for n,

[tex]n=\dfrac{PV}{RT}\\\\n=\dfrac{1\times 5}{0.0821 \times 293}\\\\n=0.207\ \text{mol}[/tex]

So, the value of n is 0.207 mol.

Answer:158 days (D)

Explanation:

It will take 158 days for grass contaminated with Sr-90 to be safe for cattle to eat. Therefore, option (A) is correct.

The half-life of a radioactive material is defined as the time that is needed to reduce the initial quantity of a radioactive element to half after disintegration.

The half-life of a radioactive element can be described as the characteristic of the element and does not influence by the initial amount of the radioactive substance.

Given, the half-life of the Strontium-90 = 28 days

The rate constant of the decay can be determined as:

[tex]t_{\frac{1}{2} } =\frac{0.693}{k}[/tex]

[tex]k=\frac{0.693}{t_{\frac{1}{2} } }[/tex]

k = 0.693/28

k = 0.025 day⁻¹

The concentration of Strontium-90 reduced to less than 2% is safe. Therefore final concentration [A] = 2 % = 0.02

[tex]t = \frac{2.303}{k} log \frac{[A_o]}{[A]}[/tex]

[tex]t = \frac{2.303}{0.02475} log \frac{1}{[0.02]}[/tex]

t = 158 days

Learn more about the half-life period, here:

brainly.com/question/14521252

#SPJ5

Answer:

0.17 lb

Explanation:

78 g * (1 lb/454 g)=0.17 lb

If you want additional help with chemistry or another subject for FREE, check out growthinyouth.org.

Answer:

Temperature of the water

Explanation:

In every study, there must be independent and dependent variables. An independent variable is the variable that is changed in order to obtain a response. In this case, the temperature of the water is being changed, the response in this experiment is the respiration rate of the goldfish.

Thus the respiration rate of the goldfish is the dependent variable because it is controlled by the temperature of the water and changes accordingly.

Summarily, the independent variable is the temperature of the water while the dependent variable is the respiration rate of the goldfish.

Answer:

CO =Coordinate Covalent Bond ,H2O = Water , NE= Nickel or Neon ,KCL=Potassium Chloride and O2 = Water

Explanation:

hope you wiill get help from me please follow me

Answer:

CH3CH=NH2+>CH3CH2NH3 +

Explanation:

There are certain structural features that determine the stability of cationic species. These features that lead to the stability and higher acid strength of cations are those features that stabilize the cation.

CH3CH=NH2+ is more acidic than CH3CH2NH3 + owing to the fact that CH3CH=NH2+ contains a double bond in close proximity with the hydrogen that can be lost as a proton. Electron withdrawal by the double bond (greater s character) makes it easier for this hydrogen to be lost as a proton compared to CH3CH2NH3 +.

Answer:

Yah, it's a neutral oxide

Explanation:

[tex]{ \bf{2H_{2(g)} +O_{2(g)} \: →2H _{2}O _{(l)} }}[/tex]

Answer:

An electrochemical cell that takes in energy to carry out a nonspontaneous redox reaction

Answer:

1) The quantum number l can have values from

2 to 0

2)The total number of orbitals possible at the n = 3 energy level is 3'2=9

3) If the value of l = 3 ... The quantum number ml can have values from 3 to -3

The quantum number l determines the shape of the orbital.  In this case, if the value of n is 3, then the quantum number l can have values from 0 to (3-1), which is 2.

The total number of orbitals possible at the n = 3 energy level can be determined using the formula 2l + 1. So, for l = 0, there is 1 orbital. For l = 1, there are 3 orbitals. And for l = 2, there are 5 orbitals. Therefore, the total number of orbitals possible at the n = 3 energy level is 1 + 3 + 5 = 9.

On the other hand, the quantum number ml represents the magnetic quantum number. It specifies the orientation of the orbital in space. The value of ml ranges from -l to +l. So, if the value of l is 3, then the quantum number ml can have values from -3 to +3.

The total number of orbitals possible at the l = 3 sublevel can be determined using the formula 2ml + 1. So, for ml = -3, there is 1 orbital. For ml = -2, there is 3 orbitals. For ml = -1, there is 5 orbitals. For ml = 0, there is 7 orbitals. For ml = 1, there is 5 orbitals. For ml = 2, there is 3 orbitals. And for ml = 3, there is 1 orbital.

Therefore, the total number of orbitals possible at the l = 3 sublevel is 1 + 3 + 5 + 7 + 5 + 3 + 1 = 25.

Learn more about quantum number,here:

https://brainly.com/question/32773003

#SPJ4

Answer:

3

Explanation:

Resonance is a valence bond concept put forward by Linus Pauling to explain the fact that the observed properties of a molecule may be as a result of the fact that its actual structure lie somewhere between a given number of structural extremes called canonical structures or resonance structures.

There are three resonance structures for SO3 that obey the octet rule. All the S-O bonds in SO3 are equivalent in these resonance structures.

Seven equivalent resonance structures for the molecular of SO3 can be drawn without breaking the octet rule.

We can arrive at this answer because:

In an SO3 molecule, electrons are shared between atoms. This sharing can be done with seven resonance structures.

These structures are shown in the figure below.

More information:

https://brainly.com/question/8155254?referrer=searchResults

Answer:

The role of Chemistry in the field of Economics is as a driving force in all industries, from basic materials for industrial machinery to industrial raw materials.

Answer:

Explanation:

In all calorimetric experiment , the calorimeter must be isolated from the surrounding . Otherwise the heat change in the experiment can not be determined with precision .

The reaction is endothermic . Hence, there is lowering of temperature due to absorption of heat in the reaction equal to ΔH°. The value of ΔH° can be calculated by measuring fall in the temperature of the content . The fall in the temperature will be less when heat is allowed to come from the surrounding . Less fall of temperature will result in less ΔH° to be calculated .

Hence in the given experiment , if the student neglects to put lid on the cup , the experiment will give less value of ΔH°.

Answer:

1)Ni=1s2, 2s2, 2p6, 3s2, 3p6, 4s0, 3d10 called full-filled

2)Cr=1s2, 2s2, 2p6, 3s2, 3p6, 4s1, 3d5 called half-filled

Answer:

The number of moles of excess reagent NO₂ that are present after the reaction has completed is 7 moles.

Explanation:

The balanced reaction is:

3 NO₂ + H₂O → 2 HNO₃ + NO

By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of reactants and products participate in the reaction:

The limiting reagent is one that is consumed in its entirety first, determining the amount of product in the reaction. When the limiting reagent ends, the chemical reaction will stop.

In other words, the limiting reagent is that reagent that is consumed first in a chemical reaction, determining the amount of products obtained. The reaction depends on the limiting reagent, because the other reagents will not react when one is consumed.

You can apply the following rule of three: if by stoichiometry of the reaction 3 moles of NO₂ react with 1 mole of H₂O, 13 moles of NO₂ react with how many moles of H₂O?

[tex]moles of H_{2}O=\frac{13 moles of NO_{2}*1 mole of H_{2}O }{3 moles of NO_{2}}[/tex]

moles of H₂O= 4.33 moles

But 4.33 moles of H₂O are not available, 3 moles are available. Since you have less moles than you need to react with 13 moles of NO₂, water H₂O will be the limiting reagent.

To determine the number of moles of excess reagent NO2 that are present after the reaction is complete, you can apply the following rule of three: if by stoichiometry of the reaction 1 moles of H₂O react with 3 mole of NO₂, 3 moles of H₂O react with how many moles of NO₂?

[tex]moles of NO_{2}=\frac{3 moles of NO_{2}*3 mole of H_{2}O }{1 mole of H_{2}O}[/tex]

moles of NO₂= 6 moles

If 6 moles of NO₂ react and 13 moles of the compound are present, the amount that remains in excess is calculated as: 13 moles - 6 moles= 7 moles

The number of moles of excess reagent NO₂ that are present after the reaction has completed is 7 moles.

I think 2 answer is write

Answer:

In order from lowest to highest:

Methane < Ethane < Chloroethene < Methanol

i.e: CH4 < CH3CH3 < CH3CH2OH < CH3CH2Cl

Explanation:

Compounds with stronger molecular fore have higher boiling points, thus making the molecules more difficult to pull apart. The presence of chains also increases the molecular dispersion. The dipole force of ethanol makes it have a very high boiling point.

I'm positive this explanation would suffice. Best of luck.

The order of increasing boiling points of the substances listed is; CH4 < CH3CH3 < CH3CH2Cl < CH3CH2OH.

Intermolecular interactions occur between molecules. The boiling point and melting points of substances depends on the nature and magnitude of intermolecular interaction between the molecules of the substance.

The order of increasing boiling points of the substances listed is as follows; CH4 < CH3CH3 < CH3CH2Cl < CH3CH2OH. CH3CH2OH has the highest boiling point due to intermolecular hydrogen bonds in the molecule. Though CH4 and CH3CH3 are both alkanes, CH3CH3 has a higher molecular mass and consequently greater dispersion forces and a higher boiling point.

Learn more: https://brainly.com/question/865531

Answer:

[tex]\boxed {\boxed {\sf 3.7 * 10^{22} \ molecules \ NaCl}}[/tex]

Explanation:

We are asked to find how many molecules are in 3.6 grams of sodium chloride.

First, we convert grams to moles using the molar mass. These values are equivalent to atomic masses on the Periodic Table, but the units are grams per moles instead of atomic mass units. Look up the molar masses of the individual elements: sodium and chlorine.

There are no subscripts in the chemical formula (NaCl), so we simply add the 2 molar masses.

Now we will convert using dimensional analysis. First, set up a ratio using the molar mass.

[tex]\frac {58.4397693 \ g \ NaCl}{ 1 \ mol \ NaCl}[/tex]

We are converting 3.6 grams to moles, so we must multiply the ratio by this value.

[tex]3.6 \ g \ NaCl *\frac {58.4397693 \ g \ NaCl}{ 1 \ mol \ NaCl}[/tex]

Flip the ratio so the units of grams of sodium chloride cancel.

[tex]3.6 \ g \ NaCl *\frac { 1 \ mol \ NaCl}{58.4397693 \ g \ NaCl}[/tex]

[tex]3.6 *\frac { 1 \ mol \ NaCl}{58.4397693}[/tex]

[tex]\frac { 3.6}{58.4397693} \ mol \ NaCl[/tex]

[tex]0.06160188589 \ mol \ NaCl[/tex]

Next, we convert moles to molecules using Avogadro's Number. This is 6.022 × 10²³ and it tells us the number of particles (atoms, molecules, formula units, etc). In this case, the particles are molecules of sodium chloride. Let's set up another ratio.

[tex]\frac {6.022 \times 10^{23} \ molecules \ NaCl}{ 1 \ mol \ NaCl}[/tex]

Multiply by the number of moles we calculated.

[tex]0.06160188589 \ mol \ NaCl * \frac{6.022 \times 10^{23} \ molecules \ NaCl}{1 \ mol \ NaCl}[/tex]

The units of moles of sodium chloride cancel.

[tex]0.06160188589 * \frac{6.022 \times 10^{23} \ molecules \ NaCl}{1 }[/tex]

[tex]3.70966557*10^{22} \ molecules \ NaCl[/tex]

The original measurement of grams (3.6) has 2 significant figures, so our answer must have the same. For the number we found, that is the tenths place. The 0 in the hundredth place tells us to leave the 7 in the tenth place.

[tex]3.7 * 10^{22} \ molecules \ NaCl[/tex]

There are [tex]3.7 * 10^{22} \ molecules \ NaCl[/tex] in 3.6 grams and the correct answer is choice D.

Answer:

The correct answer is -341.2 kJ per mole.

Explanation:

The reaction given is:  

CO (g) + Cl₂ (g) ⇔ COCl₂ (g)

Kp = 5.62 × 10³⁵

T = 25 °C or 298 K

The formula for calculating ΔG is,  

ΔG° = -RTlnKp

ΔG° = -8.314 × 298 ln (5.62 × 10^35)

ΔG° = -203.9 kJ/mol

ΔG° = ∑nΔG°f (products) -∑nΔG°f (reactants)

ΔG° = ΔG°f (COCl₂ (g)) - [ΔG°f (CO(g)) + ΔG°f (Cl₂(g))]

ΔG°f (COCl₂ (g)) = ΔG° + [ΔG°f (CO (g)) + ΔG°f (Cl₂(g))]

ΔG°f (COCl₂ (g)) = -203.9 + (-137.28 + 0.00)

ΔG°f (COCl₂ (g)) = -341.2 kJ/mol

The standard Gibbs free energy [tex]\mathbf{\Delta G^o_f}[/tex] for COCl2 at 25°C is -341.25 kJ/mol

The given equation for the chemical reaction is

CO(g) + Cl2(g) ⇌ COCl2(g)

At the temperature of 25°C = (273 + 25) K, the equilibrium constant [tex]\mathbf{K_p = 5.62\times 10^{35}}[/tex]

Consider the expression for the relationship between [tex]\mathbf{\Delta G^o}[/tex] and [tex]\mathbf{K_p }[/tex] for the equilibrium reaction can be expressed as:

[tex]\mathbf{\Delta G^o = - RT In K_p}[/tex]

where;

∴

[tex]\mathbf{\Delta G^o = - (8.314 \times 10^{-3}\ kJ/K.mol \times 298 \ K) \times In (5.62 \times 10^{35} )}[/tex]

[tex]\mathbf{\Delta G^o = -2.477572\ K \times 82.31680992}[/tex]

[tex]\mathbf{\Delta G^o = 203.95 \ kJ}[/tex]

Thus, the standard free energy for the reaction is 203.95 kJ/mol

For a given reaction, the standard Gibbs free energy can be calculated by using the formula:

[tex]\mathbf{\Delta G^o_{rxn} = \sum n \Delta G^o_f (products) - \sum m \Delta G^o_f (reactants) }[/tex]

[tex]\mathbf{\Delta G^o_{rxn} =\Big [\Delta G^o_{f} (COCl_{2(g)} ) -\Big(\Delta G^o_{f} (CO)_{(g)} + \Delta G^o_{f} (Cl)_{2(g)} ) \Big ) \Big ] }[/tex]

replacing the values of and solving for COCl2 at standard free energy of formation of substances, we have:

[tex]\mathbf{-203.95 \ kJ/mol =\Big [\Delta G^o_{f} (COCl_{2(g)} ) -\Big(-137.3 kJ/mol + 0 \ kJ/mol\Big ) \Big ] }[/tex]

Collecting like terms, we have:

[tex]\mathbf{\Delta G^o_{f} (COCl_{2(g)} ) = -203.95 \ kJ/mol -137.3 kJ/mol }[/tex]

[tex]\mathbf{\Delta G^o_{f} (COCl_{2(g)} ) = -341.25 \ kJ/mol }[/tex]

Therefore, we can conclude that the standard Gibbs free energy [tex]\mathbf{\Delta G^o_f}[/tex] for COCl2 at 25°C is -341.25 kJ/mol

Learn more about standard Gibbs free energy here:

https://brainly.com/question/13318988?referrer=searchResults

Q={x:x[tex]\epsilon[/tex]n,7<n<31}

[tex]\\ \sf\longmapsto Q=\left\{8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30\right\}[/tex]

You can write it like this too

[tex]\\ \sf\longmapsto Q=\left\{8,9......30,31\right\}[/tex]

Answer:

D. Acetone is captured and cooled.

The correct answer is option D: Acetone is captured and cooled.

Distillation is a method of separation based on the difference in boiling point of two liquids.

The liquid that has a lower boiling point is first separated from the mixture. It vaporizes, cooled and collected before the liquid that has a higher boiling point.

In this case, acetone is captured and cooled before water since it has a boiling point of 56ºC and water has a boiling point of 100ºC.

https://brainly.com/question/15187318

[tex] \LARGE{ \boxed{ \rm{ \pink{Solution:}}}}[/tex]

We know, 1 m³ of space can hold 1000 l of the substance.

⇛ 1 m³ = 1000 l----(1)

And, 1 l is 1000 times more than 1 ml

⇛ 1 l = 1000 ml------(2)

So, From (1) and (2),

⇛ 1 m³ = 1000 × 1000 ml

⇛ 1m³ = 1000000 ml

We had to find,

⇛ 1.40 m³ = 1.40 × 1000000 ml

⇛ 1.40 m³ = 140/100 × 1000000 ml

⇛ 1.40 m³ = 1400000 ml

⇛ 1.40 m³ = 14,00,000 ml / 14 × 10⁵ ml / 1.4 × 10⁶ ml

☃️ So, 1.40 m³ = 14 × 10⁵ ml / 1.4 × 10⁶ ml.

━━━━━━━━━━━━━━━━━━━━

Answer:

C₃H1₂ +

Explanation:

just took the exam

Answer:

1. Zinc sulfide : about the same solubility, no common ion is found.

2. Silver chloride : less solubility due to the presence of chloride ions provided by the 0.10 M hydrochloric acid.

3. Lead iodide  : about the same solubility, no common ion is found.

4. Silver hydroxide : about the same solubility, no common ion is found.

Explanation:

Hello,

In this case, we first must remember that adding a common ion (which is related with the dissolving solid) decreases the solubility of the insoluble solid due to the fact Le Chatelier's principle states the reaction will shift leftwards (reactants) to reestablish equilibrium, therefore, we have:

1. Zinc sulfide : about the same solubility, no common ion is found.

2. Silver chloride : less solubility due to the presence of chloride ions provided by the 0.10 M hydrochloric acid.

3. Lead iodide  : about the same solubility, no common ion is found.

4. Silver hydroxide : about the same solubility, no common ion is found.

Best regards.

The question is incomplete,the complete question is as follows:

A piece of solid Fe metal is put into an aqueous solution of Cu(NO3)2. Write the net ionic equation for any single-replacement redox reaction that may be predicted. Assume that the oxidation state of in the resulted solution is 2 . (Use the lowest possible coefficients for the reaction. Use the pull-down boxes to specify states such as (aq) or (s). If a box is not needed, leave it blank. If no reaction occurs, leave all boxes blank and click on Submit.)

Answer:

Fe(s) + Cu^2+(aq) => Fe^2+(aq) + Cu(s)

Explanation:

An ionic equation is a chemical equation which shows clear image of reactions of the electrolytes in aqueous solution.

Molecular reaction equation for the reaction between iron and copper II nitrate is as follows:

Fe(s) + Cu(NO3)2(aq) => Fe(NO3)2(aq) +Cu(s)

The net ionic equation for any single-replacement redox reaction is as follows:

Fe(s) + Cu^2+(aq) => Fe^2+(aq) + Cu(s)

The structures are shown in the image attached.

A structural formula is the representation of the molecule in which all atoms and bonds in the molecule are shown.

Since the question requires that all the lone pairs, formal charges and sigma and pi bonds should be shown, then the simple condensed structural formula becomes insufficient in this case.

I have attached images of the structural formula of sodium benzoate (image 1), benzoic acid (image 2)  and tetrahydrofuran (image 3).

All the formal charges, lone pairs as well as sigma and pi bonds are fully shown.

https://brainly.com/question/9988658

Taking into account the definition of molarity and the stoichiometry of the reaction, the correct option is option C) 0.44 L of 6.9 M NaOH is needed to completely titrate 0.42 L of 2.39 M phosphoric acid.

The balanced reaction is:

H₃PO₄ (aq) + 3 NaOH (aq) → Na₃PO₄ (aq) + 3 H₂O(aq)

Then, by stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

Molarity is the number of moles of solute that are dissolved in a given volume.

Molarity is determined by:

[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]

 Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].

In this case, 0.42 L of 2.39 M phosphoric acid reacts. So, by definition of molarity, the number of moles that participate in the reaction is calculated as:

[tex]2.39 \frac{moles}{liter}=\frac{number of moles of phosphiric acid}{0.42 liters}[/tex]

Solving:

number of moles of phosphiric acid= 2.39 [tex]\frac{moles}{liter}[/tex]* 0.42 liters

number of moles of phosphiric acid= 1.0038 moles ≅ 1 mole

Approaching 1 mole of the amount of phosphoric acid required, then by stoichiometry of the reaction, 3 moles of NaOH are necessary to react with 1 mole of the acid.

Then by definition of molarity and knowing that 6.9 M NaOH is needed, you can calculate the necessary volume amount of NaOH by:

[tex]6.9 \frac{moles}{liter} =\frac{3 moles}{volume}[/tex]

Solving:

6.9 [tex]\frac{moles}{liter}[/tex]* volume= 3 moles

[tex]volume=\frac{3 moles}{6.9\frac{moles}{liter} }[/tex]

volume= 0.44 L

The correct option is option C) 0.44 L of 6.9 M NaOH is needed to completely titrate 0.42 L of 2.39 M phosphoric acid.

Learn more about molarity with this example: https://brainly.com/question/15406534?referrer=searchResults

Answer:

A precipitate will form.

[Ag⁺] = 2.8x10⁻⁵M

Explanation:

When Ag⁺ and CrO₄²⁻ are in solution, Ag₂CrO₄(s) is produced thus:

Ag₂CrO₄(s) ⇄ 2 Ag⁺(aq) + CrO₄²⁻(aq)

Ksp is defined as:

Ksp = 1.1x10⁻¹² = [Ag⁺]² [CrO₄²⁻]

Where the concentrations [] are in equilibrium

Reaction quotient, Q, is defined as:

Q = [Ag⁺]² [CrO₄²⁻]

Where the concentrations [] are the actual concentrations

If Q < Ksp, no precipitate will form, if Q >= Ksp, a precipitate will form,

The actual concentrations are -Where 500mL is the total volume of the solution-:

[Ag⁺] = [AgNO₃] = 0.12M ₓ (250mL / 500mL) = 0.06M

[CrO₄²⁻] = [Na₂CrO₄] = 0.33M × (250mL / 500mL) = 0.165M

And Q = [0.06M]² [0.165M] = 5.94x10⁻⁴

As Q > Ksp; a precipitate will form

In equilibrium, some Ag⁺ and some CrO₄⁻ reacts decreasing its concentration until the system reaches equilibrium. Equilibrium concentrations will be:

[Ag⁺] = 0.06M - 2X

[CrO₄²⁻] = 0.165M - X

Where X is defined as the reaction coordinate

Replacing in Ksp expression:

1.1x10⁻¹² = [0.06M - 2X]² [0.165M - X]

Solving for X:

X = 0.165M → False solution. Produce negative concentrations.

X = 0.0299986M

Replacing, equilibrium concentrations are:

[Ag⁺] = 0.06M - 2(0.0299986M)

[CrO₄²⁻] = 0.165M - 0.0299986M

[CrO₄²⁻] = 0.135M

Answer:

The formula is:

Sn(ClO3)2

Tin(II) Chlorate is also called stannous chlorate and is a white-colored solid. Hydrates are the addition of water molecules. Tin (II) chlorate decahydrate is represented by Sn(ClO₃)₂ . 10 H₂O.

Hydrates are the chemical compounds used to represent the water molecule (H₂O) in a compound. The water molecules are added to the compound formula as a crystalline structure.

The element tin is represented by the symbol Sn and chlorate is represented as (ClO₃)₂. The formula also has decahydrate which means it has ten molecules of water that can be represented by 10 H₂O.

The stock nomenclature is used to give the formula for the compound. The overall formula of the compound after adding the individual symbol will give, Sn(ClO₃)₂. 10 H₂O.

Therefore, Sn(ClO₃)₂ . 10 H₂O is a formula for tin (II) chlorate decahydrate.

Learn more about hydrates here:

https://brainly.com/question/11202174

#SPJ2

Answer:

(CH3)3N

Explanation:

Hydrogen bonding can be called a type of intracellular force of the attraction. It is the force that occur between molecules. It is the bonding between the molecules and of hydrogen and electronegative items in the covalent bond. This is called the hydrogen donor. An electro-negative hydrogen atoms may be a hydrogen bonded. It is also called a hydrogen acceptor.

Thus in (CH3)3N, the hydrogen atoms becomes bonded with carbon. Carbon is not electronegative atoms. Thus it does not play as donor. Nitrogen is electronegative and play as hydrogen acceptor. But there is no presence of hydrogen acceptor. Thus there is no molecules that exhibit hydrogen molecules bonding.

[tex]\bold {(CH_3)_3N}[/tex] does not have hydrogen bonding because of the absence of electronegativity difference.

Hydrogen bond:

It is an inter-molecular bond. It is due to the difference in electronegativities of constituent atoms. This creates dipole in the atoms so, atoms start to attract each other.

In [tex]\bold {(CH_3)_3N}[/tex], the hydrogen atoms are bonded with carbon. The difference between the electronegativities Carbon and hydrogen is very less.

Therefore, [tex]\bold {(CH_3)_3N}[/tex] does not have hydrogen bonding because of the absence of electronegativity difference.

To know more about Hydrogen Bond,

https://brainly.com/question/3464712