Answer:
Solubility = [SO₄²⁻]
Explanation:
Solubility of Ag₂SO₄ can be understood seen its Ksp equilibrium:
Ag₂SO₄(s) ⇄ SO₄²⁻ + 2Ag⁺
Where 1 mole of silver sulfate dissolves producing 1 mole of sulfate ion and 2 moles of silver ion.
Solubility is defined as: "the amount of solid that can be dissolved per liter of solution".
In the dissolution process, the moles of Ag₂SO₄ dissolved are equal to moles of SO₄²⁻.
That means:
Solubility = [SO₄²⁻]If 5.0 kJ of energy is added to a 15.5-g sample of water at 10.°C, the water is Group of answer choices
Answer:
The water is completely vaporized at this stage.
Explanation:
The complete question is
If 5.0 kJ of energy is added to a 15.5-g sample of water at 10.°C, the water is
-boiling
-completely vaporized
-frozen solid
-decomposed
-still a liquid
Energy added = 50 kJ = 50000 J
mass of water = 15.5 g = 0.0155 kg
temperature of water = 10 °C
We know that the energy posses by a mass of water at a given temperature is given as
H = mcT
where H is the energy possessed by the mass of water
m is the mass of the water
c is the specific heat capacity of water = 4200 J/ kg- °C
T is the temperature of the water
substituting values, the energy of this amount of water is
H = 0.0155 x 4200 x 10 = 651 J
If 50 kJ is added to the water, the energy increases to
50000 J + 651 J = 50651 J
Temperature of this water at this stage will be gotten from
H = mcT
we solve for the new temperature
50651 = 0.0155 x 4200 x T
50651 = 65.1 x T
T = 50651/65.1 = 778.05 °C
This temperature is well over 100 °C, which is the vaporization temperature of water, but less than 3000 °C for its molecules to decompose.
Which of the following conditions characterizes a system in a state of chemical equilibrium?
a) Reactants are being consumed at the same rate they are being produced.
b) Concentrations of reactants and products are equal.
c) Product concentrations are greater than reactant concentrations.
d) Reactant molecules no longer react with each other.
e) Rate of forward reaction has dropped to zero.
Answer:
a) Reactants are being consumed at the same rate they are being produced.
Explanation:
In a chemical reaction, chemical equilibrium is a state in which there is no change in concentration of the reactant and product. This means that as the reactants are consumed, they are also produced. Same thing with the products; immediately they are formed, they are consumed.
The option that accurately depicts a reaction at equilibrium is;
a) Reactants are being consumed at the same rate they are being produced.
150.0 grams of an isotope with a half-life of 36.0 hours is present at time zero. How long will it take
to decay to 18.75g?
Given :
Initial mass , a = 150 gm .
Half time ,
[tex]t_{\dfrac{1}{2}}=36 \ hours[/tex].
Final mass , x = 18.75 gm .
To Find :
The time taken to decay 18.75 gm .
Solution :
We know , time taken is given by :
[tex]t=\dfrac{1}{k}\times ln(\dfrac{a}{a-x})[/tex]
Here , k is a constant given by :
[tex]k=\dfrac{0.693}{t_{\dfrac{1}{2}}}\\\\\\k=\dfrac{0.693}{36}[/tex]
Putting all given value in above equation :
We get :
[tex]t=\dfrac{36}{0.693}\times ln(\dfrac{150}{150-18.75})\\\\t=6.94\ hours[/tex]
Therefore , time taken is 6.94 hours .
Hence , this is the required solution .
SpongeBob & Friends and the Scientific Method
Scenario A. Krusty Krabs Breath Mints
Mr. Krabs created a secret ingredient for a breath mint that he thinks will "cure the bad breath people get from
cating crabby patties at the Krusty Krab. He asked 100 customers with a history of bad breath to try his new
breath mint. He had fifty customers (Group A) cat a breath mint after they finished eating a crabby patty. The
other fifty (Group B) also received a breath mint after they finished the sandwich, however, it was just a regular
breath mint and did not have the secret ingredient. Both groups were told that they were getting the breath mint
that would cure their bad breath. Two hours after cating the crabby patties, thirty customers in Group A and ten
customers in Group B reported having better breath than they normally had after cating crabby patties.
1. Which people are in the control group?
2. What is the independent variable?
3. What is the dependent variable?
4. What should Mr. Krabs' conclusion be?
5. Was this a quantitative or a qualitative measurement?
6. Why do you think 10 people in group B reported fresher breath?
Answer:
1. Which people are in the control group? The people who received the mint without the secret ingredient
(Group B) would be the control group.
2. What is the independent variable? Secret ingredient in the breath mint
3. What is the dependent variable? Amount of breath odor (or bad breath)
4. What should Mr. Krabs’ conclusion be? The breath mint with the secret ingredient appears to reduce the
amount of breath odor more than half the time, but it is not 100% effective.
5. Why do you think 10 people in group B reported fresher breath? This may be due to the placebo effect.
g A sample of unknown gas has a mass of 1.95 g and occupies 3.00 L at 1.25 atm and 20 C. What is the molar mass of the unknown gas
Answer:
Molar mass = 12.51 g/mol
Explanation:
V = 3L
P = 1.25 atm
T = 20 C = 20 + 273 = 293 K (Upon conversion to kelvin temperature)
n =?
m = 1.95g
Molar mass = ?
The variables are related by the follwing equation;
pV = nRT
where r = gas constant = 0.0821 L atm K−1
Solving for n, we have;
n = pV / RT
n = (1.25 * 3 ) / (0.0821 * 293)
n = 3.75 / 24.0553 = 0.1559 mol
The relationship between number of moles, n and molar mass is given as;
n = mass / molar mass
Molar mass = Mass / n = 1.95 / 0.1559
Molar mass = 12.51 g/mol
A chemistry teacher spends 35 minutes grading 1 students lab. They have 153 students who turn in lab papers for each lab. If the class completed 25 labs, how many minutes will the teacher spend grading lab papers? I just need to know how to set up the problem and the answer, thank you!!
Answer:
13,3875 minutes or 2,231.25 hours
Explanation:
153 x 25 = 3,825
person x lab paper = all the lab papers turned in.
35 x 3,825 = 13,3875
minutes x all the lab papers turned in = amount of minutes spent on grading
The sum of gravitational potential energy and kinetic
energy is called mechanical energy. Use Figure 2 to find the mechanical energy
of an idealized pendulum at a variety of times in its cycle. Identify any pattern you
notice in the values of mechanical energy.
Answer:
Explanation:
Mechanical energy = Gravitational potential energy + kinetic energy
Time Gravitational potential energy kinetic energy Total ME
0 4 0 4
2 2 2 4
4 0 4 4
6 2 2 4
8 4 0 4
and so on .....
We see that total mechanical energy is always 4 which is constant .
So gravitational and kinetic energy changes cyclically but total mechanical energy is constant .
interpretacao gerais das praticas
sobre densidade de amostra solido e liquido
Answer:
O sólido tem densidade mais alta em comparação ao líquido.
Explicação:
A densidade da amostra sólida é maior do que a densidade do líquido porque há pouco espaço entre as partículas do sólido. A densidade tem relação inversa com o volume de uma substância, se uma substância ocupa mais espaço então sua densidade é menor, enquanto se a substância ocupa menos espaço então tem maior densidade. As substâncias sólidas ocupam menos espaço em comparação com as substâncias líquidas, então podemos dizer que a densidade do sólido é maior do que as substâncias líquidas.
At what atom of the pyridine ring will oxidation and reduction reactions take place?a. 2.b. 4.c. 3.d. 1.
Answer:
1
Explanation:
Pyridine is a six membered hetrocyclic aromatic compound. Oxidation of the pyridine ring occurs at position-1.
Just like benzene, pyridine is stable towards mild oxidizing agents, however, pyridine is oxidized by peracetic acid to yield pyridine N-oxide.
Volume pressure= .785 liters
Unknown 1 = 1884 torr
Unknown 2 = 847 torr
Now that the volume of the pressure vessel is known, the number of moles H2 gas formed can be determined for the unknown samples. Enter the corrected gas pressure after subtracting the water vapor pressure for unknowns 1 and 2
Unknown 1 corrected pressure?
Unknown 2 corrected pressure?
Use the ideal gas equation and the volume obtained above to calculate the number of moles H2 gas produced during each unknown run. Assume again that the gas temperature at the end of each run is 22 degrees C
Unknown 1?
Unknown 2?
Divide the sample mass by the number of moles of H2, calculated above to determine the ratio of sample mass to number of moles of H2, produced.
Answer:
corrected pressure : unknown 1 = 2.452 Atm, unknown 2 = 1.088 atm
number of moles : unknown 1 = 0.079 moles unknown 2 = 0.035263 moles
Explanation:
Given data:
volume pressure = 0.785 liters
Unknown 1 = 1884 torr (1884 mmhg )
Unknown 2 = 847 torr ( 847 mmhg )
vapor pressure at 22⁰c = 19.8 mmhg
Determine the number of moles of H2 gas for the unknowns
unknown corrected pressure for unknown 1 = total pressure - vapor pressure = 1884 - 19.8 = 1864.2 mmhg / 760 = 2.452 Atm
no of moles = PV / RT
T = 22 + 273.15 = 295.15 k
P = 2.452 atm
R = 0.08206L.atm/mole.K
v = 0.785
number of moles = (2.452 * 0.785 ) / (0.08206 * 295.15 ) = 0.079 moles of
Unknown corrected pressure for unknown 2 = total pressure - vapor pressure = (847 - 19.8 ) / 760 = 1.088 atm
number of moles = PV / RT
T = 22 + 273.15 = 295.15 k
R = 0.08206L.atm/mole.K
v = 0.785
P = 1.088 atm
number of moles = (1.088 * 0.785 ) / (0.08206 * 295.15 ) = 0.035263 moles
B ) determine the ratio of sample mass to number of moles
molar mass of H2 = 2.01588 g/mole
for unknown 1 = 2.01588 / 0.079 = 25.51
for unknown 2 = 2.01588 / 0.035263 = 57.167
PLEASE HELP I WILL GIVE BRAINLIEST 40+ POINTS. PLEASE
This is the periodic table(image below)
Using information from the periodic table, which diagram shows a
correct model for an atom neon(also image below)
Answer:
A.
Explanation:
Neon 19 is shown on image A.
Diagram A shows the correct model for an atom neon.
What are the properties of periodic table ?The arrangement of elements by their periodic properties and physical and chemical characteristic make a periodic table.
The chemical and physical properties of the group of the element belongs to Alkali Metals, Less dense, One loosely bound valence electron, Highly reactive, Low ionization energy, Low electronegativity
The lanthanides and actinides are also transition metals, these are softer and nonmetallic properties, all of these elements tend to have a shiny, metallic appearance, radioisotopes of other elements, actinides are radioactive.
Learn more about periodic table, here:
https://brainly.com/question/11155928
#SPJ2
Considering the redox reaction Cr + Ni²⁺ → Cr³⁺ + Ni, how many electrons are transferred in the balanced reaction?
Answer:
The correct answer is : 6 electrons
Explanation:
From the reduction-oxidation reaction, we identify the half-reactions:
Oxidation reaction: Cr (oxidation number= 0) loses 3 electrons and forms the cation Cr³⁺.
Cr → Cr³⁺ + 3 e-
Reduction reaction: the cation Ni²⁺ gains 2 electrons to form Ni (oxidation number= 0).
Ni²⁺ + 2 e- → Ni
We write the two half-reactions together and we multiply the reduction reaction by 3 and the oxidation reaction by 2 to obtain the same quantity of electrons in each half-reaction: 6.
(Ni²⁺ + 2 e- → Ni) x 3
(Cr → Cr³⁺ + 3 e-) x 2
-------------------------------
3 Ni²⁺ + 2 Cr → 3 Ni + 2 Cr³⁺ (balanced reaction)
Therefore, in the balanced reaction a total of 6 electrons are transferred.
What is all matter I’m the universe made of?
Answer:
The building block that makes up all matter in the universe is atoms.
Help! It’s for chemistry I attached a picture thank you!
Answer:
0.15 L
Explanation:
You need to first find the volume of the container. You can do this by dividing the mass by the density. This will give you the mass in mL.
5.00 kg = 5,000 g
(5,000 g)/(1.00 g/mL) = 5,000 mL
5,000 mL = 5 L
Now, find the volume the seawater will take up.
(5,000 g)(1.03 g/mL) = 4854.4 mL
4854.4 mL = 4.85 L
Subtract the two volumes to find the volume that left unfilled.
5 L - 4.85 L = 0.15 L
1) What mass of Na2CO3 is required to make 50cc of its seminormal solution?
Answer:
[tex]m=1.325gNa_2CO_3[/tex]
Explanation:
Hello,
In this case, by considering the given seminormal solution, we infer it is a 0.5-N solution which means that we can obtain the equivalent grams as shown below for the 55 cc (0.055 L) volume:
[tex]eq-g=0.5eq-g/L*0.050L=0.025eq-g[/tex]
Next, since sodium carbonate has two sodium ions with a +1 oxidation state each, we can obtain the moles:
[tex]mol=0.025eq-gNa_2CO_3*\frac{1molNa_2CO_3}{2eq-gNa_2CO_3}\\ \\mol=0.0125molNa_2CO_3[/tex]
Finally, the mass is computed by using its molar mass (106 g/mol)
[tex]m=0.0125molNa_2CO_3*\frac{106gNa_2CO_3}{1molNa_2CO_3} \\\\m=1.325gNa_2CO_3[/tex]
Regards.
When the equation Sn + HNO₃ → SnO₂ + NO₂ + H₂O is balanced in acidic solution, what is the smallest whole-number coefficient for Sn?
Answer:
1.
Explanation:
Hello,
In this case, for the given reaction we first assign the oxidation state for each species:
[tex]Sn^0 + H^+N^{5+}O^{-2}_3 \rightarrow Sn^{4+}O_2 + N^{4+}O^{2-}_2 + H^+_2O^-[/tex]
Whereas the half reactions are:
[tex]Sn^0+2H_2O \rightarrow Sn^{4+}O_2 +4H^++4e^-\\\\H^++H^+N^{5+}O^{-2}_3 +1e^-\rightarrow N^{4+}O^{2-}_2+H_2O[/tex]
Next, we exchange the transferred electrons:
[tex]1\times(Sn^0+2H_2O \rightarrow Sn^{4+}O_2 +4H^++4e^-)\\\\4\times (H^++H^+N^{5+}O^{-2}_3 +1e^-\rightarrow N^{4+}O^{2-}_2+H_2O)\\\\\\Sn^0+2H_2O \rightarrow Sn^{4+}O_2 +4H^++4e^-\\\\4H^++4H^+N^{5+}O^{-2}_3 +4e^-\rightarrow 4N^{4+}O^{2-}_2+4H_2O[/tex]
Afterwards, we add them to obtain:
[tex]Sn^0+2H_2O+4H^++4H^+N^{5+}O^{-2}_3 \rightarrow Sn^{4+}O_2 +4H^++4N^{4+}O^{2-}_2+4H_2O[/tex]
By adding and subtracting common terms we obtain:
[tex]Sn^0+4H^+N^{5+}O^{-2}_3 \rightarrow Sn^{4+}O_2 +4N^{4+}O^{2-}_2+2H_2O[/tex]
Finally, by removing the oxidation states we have:
[tex]Sn + 4HNO_3 \rightarrow SnO_2 + 4NO_2 + 2H_2O[/tex]
Therefore, the smallest whole-number coefficient for Sn is 1.
Regards.
The element rubidium forms a _______ with the charge . The symbol for this ion is , and the name is . The number of electrons in this ion is .
Answer:
The element rubidium forms a cation with a charge of +1. The symbol of this ion is Rb+, and the name is rubidium ion. The number of electrons in this ion is 36 electrons
Explanation:
Rubidium belongs to the group 1A of the periodic table of elements. It is an alkali metal. The rubidium atom has an atomic number of 37. The neutral atom also has 37 electrons.
Being a metal, it forms ions by the loss of electrons. Since it is an alkali metal, it has one valence shell electron. It loses this one electron to form the rubidium ion, Rb+ which then has 36 electrons.
Will a deflated football sink in water?
Answer:
no
Explanation:
light objects float
Sulfur and oxygen form both sulfur dioxide and sulfur trioxide. When samples of these are decomposed, the sulfur dioxide produces 3.52 g oxygen and 3.53 g sulfur, while the sulfur trioxide produces 9.00 g oxygen and 6.00 g sulfur.
Calculate the mass of oxygen per gram of sulfur for each sample and show that these results are consistent with the law of multiple proportions
Answer:
See explanation
Explanation:
For sulphur dioxide;
3.53 g of sulphur combines with 3.52 g of oxygen
1.00 g of sulphur combines with 1.00 × 3.52/ 3.53 = 0.997 g
For sulphur trioxide
6.00 of sulphur combines with 9.00 g of oxygen
1.00 g of sulphur combines with 1.00 × 9.00/6.00 =1.5 g
Ratio of mass of oxygen;
1 : 1.5
The law of multiple proportions states that, if two elements A and B combine to form more than one chemical compounds, then the various masses of element A which combines separately with a fixed mass of element B are in simple multiple ratio.
We can see that the mass of oxygen which combines separately with sulphur in sulphur dioxide and sulphur trioxide are in simple ratio of 1:1.5.
The density of mercury is 13.6 g/mL what is the density in lbs/L ( 1 lb hint =0.454 kg )
Answer:
[tex]30.0\frac{lb}{L}[/tex]
Explanation:
Hello,
In this case, since 454 g are equivalent to 1 pound and 1000 millilitres are equivalent to 1 liter, the required density is computed below by applying the corresponding conversion factor:
[tex]=13.6\frac{g}{mL} *\frac{1lb}{454g} *\frac{1000mL}{1L} \\\\=30.0\frac{lb}{L}[/tex]
Regards.
Water flows over Niagara Falss at the average rate of 2,400,000 kg/s, and the average height of the falls is about 50 m. Knowing that the graviatational potential energy of falling water per second = mass (kg) x height (m) x gravity (9.8 m/s2), what is the power of Niagara Falls? How many 15 W LED light bulbs could it power?
Answer:
1. 176 × 10^12 W ; 78400000000
Explanation:
Given the following :
Fall rate = 2,400,000kg/s
Average height of fall = 50m
Gravitational Potential of falling water = mgh = mass × acceleration due to gravity × height =
How many 15 W LED light bulbs could it power?
Recall : power = workdone / time
Workdone = gravitational potential energy
Mass of water = density * volume
Density of water = 1 * 10^3kg/m^3
Rate of fow = volume / time = 2400000
Hence,
Power = 1000 * 2,400,000 * 9.8 * 50
Power = 1176000000000
Power = 1. 176 × 10^12 W
How many 15 W LED light bulbs could it power?
1176000000000 / 15 = 78400000000
= 78400000000 15 W bulbs
What is the density of an object with a volume of 30ml and a mass of 90 grams
Answer:
Density = 3 g/mLExplanation:
Density of a substance can be found by using the formula
[tex]Density = \frac{mass}{volume} [/tex]From the question
mass = 90 g
volume = 30 mL
Substitute the values into the above formula and solve for the Density
That's
[tex]Density = \frac{90}{30} \\ = \frac{9}{3} [/tex]We have the final answer as
Density = 3 g/mLHope this helps you
Which question is most important to developmental psychology?
A. How much do parents influence who a child becomes?
B. How can violent conflicts be prevented?
C. How does brain chemistry affect how we feel and act?
D. How can people change their thinking and behavior?
Answer:
For much of the past century, scientists studying drugs and drug use labored in the shadows of powerful myths and misconceptions about the nature of addiction. When scientists began to study addictive behavior in the 1930s, people with an addiction were thought to be morally flawed and lacking in willpower. Those views shaped society’s responses to drug use, treating it as a moral failing rather than a health problem, which led to an emphasis on punishment rather than prevention and treatment.
Today, thanks to science, our views and our responses to addiction and the broader spectrum of substance use disorders have changed dramatically. Groundbreaking discoveries about the brain have revolutionized our understanding of compulsive drug use, enabling us to respond effectively to the problem.
As a result of scientific research, we know that addiction is a medical disorder that affects the brain and changes behavior. We have identified many of the biological and environmental risk factors and are beginning to search for the genetic variations that contribute to the development and progression of the disorder. Scientists use this knowledge to develop effective prevention and treatment approaches that reduce the toll drug use takes on individuals, families, and communities.
Despite these advances, we still do not fully understand why some people develop an addiction to drugs or how drugs change the brain to foster compulsive drug use. This booklet aims to fill that knowledge gap by providing scientific information about the disorder of drug addiction, including the many harmful consequences of drug use and the basic approaches that have been developed to prevent and treat substance use disorders.
At the National Institute on Drug Abuse (NIDA), we believe that increased understanding of the basics of addiction will empower people to make informed choices in their own lives, adopt science-based policies and programs that reduce drug use and addiction in their communities, and support scientific research that improves the Nation’s well-being.
Answer:
D
Explanation:
Classify each as a physical or chemical change.
Explain each answer.
a) When limestone is heated carbon dioxide and
calcium oxide result.
b) Digesting a candy bar.
c) Copper can be drawn into thin wires.
d) Ripening of fruits.
e) Ice floats on water
Answer:
a) When limestone is heated in a kiln, the calcium carbonate breaks down into calcium oxide and carbon dioxide. This type of reaction is called thermal decomposition. The process is called calcining. ... Slaked lime is used to reduce the acidity of the soil, which helps increase its fertility.
b) Mechanical digestion occurs in the mouth, stomach, and small intestine. Food is chemically changed indigestion when new, smaller substances are formed. These chemical changes are examples of chemical digestion. Chemical digestion begins in the mouth when enzymes in saliva begin to break down carbohydrates.
c) Copper is a ductile metal. This means that it can easily be shaped into pipes and drawn into wires. Copper pipes are lightweight because they can have thin walls. They don't corrode and they can be bent to fit around corners.
d) Ripening of fruits is a chemical change. During ripening the pigment present in the skin of the fruit changes and this can not be reversed back. it is a chemical change as once a fruit ripens it cannot turn raw again.
e) Ice is a unique substance because it is solid-state — ice — is less dense than its liquid state. Because of this property, ice floats in water. Physical properties are characteristics of a substance. They do not change. Physical properties include colour, smell, freezing/melting point, and density.
which variable is directly proportional to frequency?
velocity
wavelength
position
energy
Answer:
its letter D Energy I think
If a urine sample has a mass of 244 g and a volume of 242 mL, what is its density in g/mL?
Answer:
244/242 alright
Explanation:
yesss
Answer:
244/242 or 1.00826446 g/mL
Explanation:
Density can be calculated using the following formula.
d=m/v
where m is the mass and v is the volume.
The mass is 244 grams and the volume is 242 milliliters.
m= 244 g
v= 242 mL
Substitute the values into the formula.
d= 244 g / 242 mL
Divide 244 g by 242 mL.
d= 244/242 g/mL
d= 1.00826446 g/mL
The density is 244/242 or 1.00826446 grams per milliliter.
4.80 qt is the same as how many mL?
Answer:
1qt is the same as 946.35mL
Explanation:
4.80 US liquid quart is equal to 4542. 49 mL.
What is a US liquid quart?A quart is a unit for capacity used in the Imperial British and the U.S. Customary systems of measurement. It is used for both liquid and dry measurements, one standard quart is used in the British system. This is equal to two imperial pints, or one-fourth of the imperial gallon.
This is 69.36 cubic inches or 1,136.52 cubic cm. The U.S. system of measurements has two units for a quart. One is used for the liquid measurements and a slightly larger unit is used for the dry measurements.
The U.S. liquid quart unit is equal to two liquid pints, or one-fourth U.S. gallon. This is 57.75 cubic inches or 946.35 cubic cm. The dry quart is equal to two dry pints, or 1/32 bushel. This is 67.2 cubic inches or 1,101.22 cubic cm.
In this case, 1 US quart = 946.353 ml
So, 4.80 liquid quart = 4542.49 ml.
Therefore, 4.80 US liquid quart is equal to 4542. 49 mL.
Read more about US quart, here
https://brainly.com/question/5370818
#SPJ2
3.25 kcal is the same amount of energy as
Answer:
3.25 kcal has the same amount of energy as 13600 J
If 12.3 grams of a substance burns in air to produce 15.9 grams of a compound, what mass of the air reacted?
Answer:
[tex]m_{air}=3.6g[/tex]
Explanation:
Hello,
In this case, given the law of conservation of mass which states that mass cannot be created nor destroyed, since the produced mass of the compound is 15.9 g and the mass of the initial substance is 12.3 g we obtain the mass of air by applying the following equation:
[tex]m_{reactants}=m_{products}\\\\m_{substance}+m_{air}=m_{product}[/tex]
Thus, solving for the mass of air we obtain:
[tex]m_{air}=m_{product}-m_{substance}\\\\m_{air}=15.9g-12.3g\\\\m_{air}=3.6g[/tex]
Regards.
A student uses paper towels to clean up a small chemical spill in the lab.
Where should the dirty paper towels be placed?
A in the lab sink
B in the wastebasket
C in the chemical waste container
D in the hazardous waste container
Answer:
C. in the chemical wastebasket