Answer:
Benzene
Explanation:
You have to find the freezing point for each of these (make sure they're in Celsius). You might want to double check these but:
Benzene: 5.5
Water: 0
Butane: -138
Nitrogen: -210
The substances that will solidify before the temperature reaches 0°C is benzene. The correct option is A.
What is freezing point?Freezing, also known as solidification, is a phase transition that occurs when the temperature of a liquid falls below its freezing point.
If the intermolecular forces between its molecules are strong, the freezing point is high.
When the forces are weak, the freezing point is low. The freezing point of a liquid or the melting point of a solid occurs when the solid and liquid phases are in equilibrium.
Pure benzene has a freezing point of 5.48 degrees Celsius. Because of the salt in it, fresh water freezes at 32 degrees Fahrenheit, but seawater freezes at around 28.4 degrees Fahrenheit.
Thus, as per the given scenario, the correct option is A.
For more details regarding freezing, visit:
https://brainly.com/question/3121416
#SPJ2
Một hỗn hợp X gồm CH3OH; C2H5OH; phenol có khối lượng 28,9 gam phản ứng vừa hết với 100ml dung dịch NaOH 2M. Phần trăm theo khối lượng phenol là ? Biết C = 12; O = 16; H = 1; Na = 23. *
Answer:
nNaOH = 0,2 mol
Trong hỗn hợp các chất đề bài cho chỉ có phenol tác dụng với NaOH
C6H5OH + NaOH → C6H5ONa + H2O
0,2 ← 0,2 (mol)
⟹ mphenol = 0,2.94 = 18,8 gam
⟹
%mC6H5OH=18,8/28,9 x100%= 65,05%
Explanation:
If the hydrogen ion concentration, (H+), in a solution is 5.39 x 10-8 M,
what is [OH-]?
A.1.86 x 1021 M
B. 1.86 x 10-7 M
Answer: 1.86*10^-7M
Explanation:
Answer:
B. 1.86 x 10^-7 M
Explanation:
career in chemistry list ten
Answer:
Analytical Chemist
Forensics
Toxicologist
Biochemist
Chemical Engineer
Laboratory Technician
Pharmacologist
Chemical Technician
Materials Scientist
Environmental Chemist
If I add sugar into water then _________________
Pls help
Explanation:
When adding sugar to water it became a syrupy solution. Here sugar acts as solute, the water acts as solvent and syrupy acts as solution. When adding sugar to water, the disaccharide of sucrose is converted into monosaccharides of glucose and fructose
Answer:
syrupy solution
please answer
√In the morning, when the sun rises in the east, your shadow will be seen on the
•East
•West
•North
•South
√From which part of plant cotton and jute obtained
Answer:
hi
Explanation:
1 east
2 the flower bud for cotton and for jute the leaves
plz mark me as a BRAINLIST
ANSWER ASAP WILL GIFT BRANILIEST Which of the following happens to a molecule of an object when the object is cooled? A Its temperature increases. B It loses kinetic energy. C Its size increases. D It moves faster.
Answer:
It loses kinetic energy.
Explanation:
The definition of heat is molecules moving fast, so it cooling would mean they slow down.
Answer:
B, It loses kinetic energy.
Explanation:
question 3 chemistry help
ca and o is one ca s is two and the other one is s and o
Sarah measures out 151 grams of SO2. How many moles is this? Express your answer to three significant figures.
Answer:
[tex]\boxed {\boxed {\sf 2.36 \ mol \ SO_2}}[/tex]
Explanation:
We are asked to convert grams to moles. We will use the molar mass and dimensional analysis to perform this conversion.
1. Molar MassThe molar mass is the mass of 1 mole of a substance. These values are found on the Periodic Table because they are equivalent to the atomic masses, but the units are grams per mole instead.
We are given a mass of sulfur dioxide (SO₂). Look up the molar masses of the individual elements.
Sulfur (S): 32.07 g/mol Oxygen (O): 15.999 g/molNotice that the formula of the compound contains a subscript. The subscript after O means there are 2 moles of oxygen in 1 mole of sulfur dioxide. We must multiply oxygen's molar mass before adding sulfur's.
O₂: 15.999 * 2 = 31.998 g/mol SO₂= 32.07 + 31.998 = 64.068 g/mol2. Convert Grams to Moles
Now we will use dimensional analysis to convert grams to moles. From the molar mass, we know there are 64.068 grams of sulfur dioxide per mole, so we can set up a ratio.
[tex]\frac {64.068 \ g \ SO_2} {1 \ mol \ SO_2}[/tex]
We are converting 151 grams to moles, so we multiply by this value.
[tex]151 \ g \ SO_2 *\frac {64.068 \ g \ SO_2} {1 \ mol \ SO_2}[/tex]
Flip the ratio so the units of grams of sulfur dioxide cancel.
[tex]151 \ g \ SO_2 *\frac {1 \ mol \ SO_2}{64.068 \ g \ SO_2}[/tex]
[tex]151 *\frac {1 \ mol \ SO_2}{64.068 }[/tex]
[tex]\frac {151}{64.068 } \ mol \ SO_2[/tex]
[tex]2.356870825 \ mol \ SO_2[/tex]
3. RoundThe original measurement of grams (151) has 3 significant figures, so our answer must have the same. For the number we calculated, that is the hundredth place. The 6 in the thousandth place tells us to round the 5 in the hundredth up to a 6.
[tex]2.36 \ mol \ SO_2[/tex]
151 grams of sulfur dioxide is approximately 2.36 moles of sulfur dioxide.
Electric current is the flow of charged particles called ________ protons. electrons. sparks. static.
Answer: Electrons
Explanation: Electric current is the flow of charged particles called electrons.
Electric current is the flow of charged particles called electrons. Therefore, option (B) is correct.
What is electric current?An electric current can be described as the stream of charged particles such as electrons flowing through a conductor. The electric current can be determined as the net flow of the charge through the surface of the conductor.
The S.I. unit of the current is ampere which can be defined as the rate of flow of 1-coulomb charge in 1 second.
Electric current can be described as the flow of electrons through the electric conductor. The flow of the free electrons in the conductor creates the electric current.
A continuous source of electrons is needed to generate the electric current. The circuit must be closed so that the electrons can easily flow then only the electric current will flow through it.
Therefore, electrons are the charged particles whose flow produces an electric current.
Learn more about electric current, here:
brainly.com/question/2264542
#SPJ6
A piece of wood displaces 12.5 mL of water and has a density of 0.97 g/ml. what is the mass of the piece of wood? what will happen if the wood is placed in water?
HELP PLEASE! ASAP YOUR DA BEST! 15 POINTS YALL
Density=0.97g/mL
Volume=12.5mL
[tex]\\ \sf \longmapsto Density=\dfrac{Mass}{Volume}[/tex]
[tex]\\ \rm\longmapsto Mass=Density(Volume)[/tex]
[tex]\\ \sf \longmapsto Mass=0.97(12.5)[/tex]
[tex]\\ \sf \longmapsto Mass=12.125g[/tex]
3. How many meters above sea level is the base of your landform?
How many meters above sea level is the top of your platform?
Answer:
Base is 715 and top is 850.
Explanation:
715 meters above sea level is the base of my landform and 850 meters above sea level is the top of my platform. Base of landform from a sea level is a starting point of a city or region having same topography. This region has a specific height where it spreads we called it top of the platform. The starting point of my location is 715 meters above sea level spreads up to 850 meters of elevation.
2 Figure 3.1 shows two different forms of carbon, A and B.
A
B
Figure 3.1
a Name the two forms of carbon shown.
Answer:
show the pictures pls specify
7. In a remote area of Columbia, kids have to travel to school on a zip-line!
Would school attendance increase if all kids has to get to school on a fun
zip line?
Make a hyphotesis
Help plz!!!
Answer:
yes
Explanation:
Kids like fun things, and school is not fun , so if kids got to go to school on a zipline, attendance would be through the roof!
If a gas displays a solubility of 0.00290M at a partial pressure of 125 kPa, what is the proportionality constant for this gas in this solvent and at this temperature?
Answer:
The proportionality constant ( Henry’s constant) = 2.32 * 10^-5 M/kPa
Explanation:
Here in this question, we are concerned with calculating the proportionality constant for this gas.
Mathematically, we can get this from Henry law
From Henry law;
Concentration = Henry constant * partial pressure
Thus Henry constant = concentration/partial pressure
Henry constant = 0.00290 M/125 kPa = 2.32 * 10^-5 M/kPa
How do weathering and deposition differ? Weathering breaks down rocks; deposition leaves them in new places. Weathering has to do with air; deposition has to do with plants. Weathering occurs only in summer; deposition occurs year-round. Weathering can be chemical or physical; deposition is only chemical
Answer:
A. Weathering breaks down rocks; Deposition leaves them in new places.
Explanation:
Weathering is basically the complete process of rocks breaking apart. In contrast, deposition is when the rocks are moved and carried away from their original place and put in new locations.
Answer:
a
Explanation:
What is the voltage of an electrolytic cell with nickel and copper electrodes?
A. -0,09 V
B. 0.59 V
C. 0.09 V
D. -0.59 V
SUBMIT
Answer:
The answer is D. -0.59V
Explanation:
Answer:
-.59v
Explanation:
Which of these equations for the
formation of an oxide ion is correct?
0 + 2e" --> 02-
0 --> 02- + 2e
Answer:
A
Explanation:
Because of the cathode
Which element would have the lowest electronegativity? (1 point)
O an element with a small number of valence electrons and a small atomic radius
O an element with a small number of valence electrons and a large atomic radius
an element with a large number of valence electrons and a large atomic radius
Dan element with a large number of valence electrons and a small atomic radius
The element that will have the lowest electronegativity is an element with a small number of valence electrons and a large atomic radius.
Electronegativity of an element is the ability or power of that element in a molecule to attract electrons to its Valence electrons. The following are the properties of electronegativity:
It increases across a period from left to right of the periodic table,It decreases down the periodic table groupsGroup 1 elements are the least (lowest) electronegative elements. These elements have the lowest valence electrons with a large atomic radius. Group 7 elements are the most electronegative elements.Atomic radius of elements increase down a group because of a progressive increase in the number of shells occupied by electrons which increases the size. But it decreases across a period because electrons are accommodated within the same shell leading to greater attraction by the protons in the nucleus.
Learn more about electronegativity of elements here:
https://brainly.com/question/20348681
Answer: Its B the guy above me is correct
Which of the following molecules does not have a permanent dipole?
A CF4
B CHF3
C CH2F2
D CH3F
Explain please ❤️
Answer:
I think no b
Explanation:
because in chemistry I have nothing listen
CHF3
Does Na2 gas posses metallic character? Explain your answer..
Explanation:
It contains Na2 molecules and the atoms in this molecule are held together by a purely covalent bond because the electronegativity of the two atoms is identical.Metallic bonding would not kick in until you make clusters of quite a few atoms. Such clusters would likely not be very stable because thermodynamically the larger the clump of material the more stable it gets. So they tend to coalesce until you have chunk of metal.Metallic bonding is in a sense a form of covalent bonding, but it is very collective (delocalized over a great many atoms) and electron deficient (there are more states than electrons to fill them up with, leading to conductive properties. This means that “a metallic bond” is a bit of an oxymoron like a forest with only one tree.Reply me in commentsYes, Na2 gas possesses a metallic character.
Does NA contain metallic bonds?In the stable state, metal sodium functions as an array of Na+ ions which can be surrounded by way of a sea of 3s electrons. However, it would be wrong to consider metal sodium as an ion when you consider that the ocean of electrons is shared by using all of the sodium cations, quenching the nice fee.
Sodium most effective has one valence electron. So, in metallic bonding, it is able to only donate one electron to be delocalized at some point of the structure. In steel bonding, the real bonding is the electrostatic force between the effective cations and the delocalized electrons.
Learn more about metallic bonds here: https://brainly.com/question/20536777
#SPJ2
2. Bottled Italian salad dressing is an example of *
O a suspension
a colloid
a solution
O a homogeneous mixture
What is the outcome of all chemical changes when two substances are combined?
Answer:
This is called a chemical reaction. gas may form.heat may be produced and the color may change
100 cm^3 of oxygen diffuses through a Porous in 3second how long will it take 150 cm^3 of sulphur (iv) oxide diffuse through the same pot? ( oxygen= 16 sulphur = 32)
Answer:
3.18 seconds
Explanation:
Given the following :
Volume of oxygen (V1) = 100cm^3
Time taken (t1) = 3 seconds
Volume of Sulphur (iv) oxide (v2) = 150cm^3
From Graham's Law of diffusion:
(r1/r2) = √(m1/m2)
Where r = rate of diffusion
m = molar mass
Note rate (r) = (volume / time)
[(V1/t1) ÷ (v2/t2)] = √(m1/m2)
(v1/t1) * (t2/v2) = √(m1/m2)
m1 = 02 = (16 * 2) = 32
m2 = SO2 = (32 + (16 * 2)) = 64
(100/3) * (t2/150) = √(32/64)
100t2 / 450 = √(32/64)
100t2 / 450 = √32 / 8
100t2 / 450 = √32 / 8
100t2 * 8 = 450 * √32
800t2 = 2545.5844
t2 = 2545.5844 / 800
t2 = 3.1819805
t2 = 3.18 seconds
It will take 3.18s for 150cm^3 of Sulphur (iv) oxide to diffuse through the same pot.
Balance in basic solution: O2(g) + Cr³+ (aq) → H₂O2 (1) + Cr₂O7²- (aq)
cr2o72+H2o2-(r3+o2)
Explanation:
r62o72+H2o2-(r3+o2)
to Separate camphor from sand we use_______process.
Answer:
to Separate camphor from sand we use sublimation process.Hope it is helpful to youWhich option describes the structure of the electron shells in a neutral carbon atom? (1 point)
O The inner shell is complete with four electrons. The outer shell is incomplete with two electrons.
O The inner shell is incomplete with three electrons. The outer shell is incomplete with three electrons.
O The inner shell is complete with three electrons. The outer shell is incomplete with three electrons.
O The inner shell is complete with two electrons. The outer shell is incomplete with four electrons.
Answer:
The inner shell is complete with two electrons. The outer shell is incomplete with four electrons.
Explanation:
There can only be 2 electrons on the first (inner) shell, so it would be complete with two and there needs to be 8 electrons on the outer shell for it to be complete, so it would be incomplete with 4.
Hope this helps :)
Answer:
(Question 1) Metallic bonds are responsible for many properties of metals, such as conductivity. Why is this possible?
(Answer) The bonds can shift because valence electrons are held loosely and move freely.
(Question 2) Between which types of elements do ionic bonds occur, and how do electrons act within the bond?
(Answer) metals and nonmetals, electrons transferred
(Question 3) Which kind of bond would occur between sodium (Na, Group IA) and chlorine (Cl, Group VIIA)?
(Answer) ionic
(Question 4) Why is carbon said to provide a “backbone” in many molecules?
(Answer) Carbon atoms can form chains and branches with each other, and other atoms can attach to these.
(Question 5) Which option describes the structure of the electron shells in a neutral carbon atom?
(Answer) The inner shell is complete with two electrons. The outer shell is incomplete with four electrons.
Explanation:
i just finished the quick check. enjoy <3
what is the requirements to obtain citizenship?
please answer it correctly
Answer:
Age. ...
Residency. ...
Residence and Physical Presence.
Good Moral Character.
Attachment to the Constitution.
Language.
U.S. Government and History Knowledge.
Oath of Allegiance.
These are some requirements for obtaining citizenship .
Which term is defined as “anything that has mass and occupies space”? a -compound b - element c - substance d - matter
Answer:
D) Matter
Explanation:
Difference between atomic number and atomic weight any 2 points
Answer:
According to the definitions given, atomic mass which is also called atomic weight is the measured total mass of an element's atom. Whereas, atomic number is nothing but the total number of neutrons and protons in the nucleus of an atom....
can u talk to in comment section
what is second explain it briefly
Explanation:
it is that when an object is moving 25 m per sec to calculate its time we can simply divide 1.5 by 25 and multiply by 1