What scientific instrument is sensitive enough to detect a planet transiting a star?

Answer:

The water cycle or hydrologic is a continuous cycle where water evaporates, travels into the air and becomes part of a cloud, falls down to earth as precipitation, and then evaporates again. This repeats again and again in a never-ending cycle. Water keeps moving and changing from a solid to a liquid to a gas, over and over again.

Precipitation creates runoff that travels over the ground surface and helps to fill lakes and rivers. It also percolates or moves downward through openings in the soil to replenish aquifers under the ground. Some places receive more precipitation than others do. These areas are usually close to oceans or large bodies of water that allow more water to evaporate and form clouds. Other areas receive less precipitation. Often these areas are far from water or near mountains. As clouds move up and over mountains, the water vapor condenses to form precipitation and freezes. Snow falls on the peaks.

The continual movement of water on, above, and below the Earth's surface is referred to as the water cycle, also known as the hydrological cycle.

The water cycle demonstrates how water is constantly moving both inside the Earth and in the atmosphere. It is a complicated system with a wide range of processes.

Water vapor is created when liquid water evaporates, and this water vapor then condenses to form clouds and falls back to earth as rain and snow.

The constant flow of water between the ground and the atmosphere is known as the water cycle. Water travels to land as precipitation, like snow and rain.

The cycle is then completed by the water evaporating, condensing into clouds in the atmosphere, and precipitating once more on earth. The water cycle is composed mostly of four processes: evaporation, convection, precipitation, and collection.

Thus, The continual movement of water on, above, and below the Earth's surface is referred to as the water cycle.

To learn more about the water cycle, follow the link;

https://brainly.com/question/1151425

#SPJ2

Answer:

The accuracy of the measuring ruler is given as tenth of a centimetre and given that the image above the ruler is measuring in between a tenth of a centimetre, it is therefore measuring at a higher accuracy than the ruler

The least count of the vernier scale =  (Main scale's smallest reading)/(Number of vernier scale divisions)

Where;

Main scale's smallest reading = 0.1 cm

Number of vernier scale divisions = 10

We have;

The least count of the vernier scale =0.1/10 = 0.01

The image above the ruler, (the vernier scale measurement) should therefore measure at hundredth of a centimetre and the value of the measurement given to two places of decimal, 2.XX, as such 2.755 which is of a level of accuracy of a thousandth for the vernier scale would not be correct.

Explanation:

Answer:

The answer is 97.2g .

Explanation:

Given that 1 mL is equals to 1 cm². Then we have to apply Density formula :

[tex]density = \frac{mass}{volume} [/tex]

[tex]let \: density = 2.7 \: , \: volume = 36[/tex]

[tex]2.7 = \frac{mass}{36} [/tex]

[tex]mass = 2.7 \times 36[/tex]

[tex]mass = 97.2 \: grams[/tex]

Answer:

write in English bro? can you?

Explanation:

I can't understand your language sorry .

[tex]HELLO![/tex]

To completely describe an electron in an atom, four quantum numbers are needed:

                                          [tex]MiraculousAlejandra[/tex].

Answer:

0.5cm²

Explanation:

the volume is found by dividing the mass over the density

v=m/d

=7g/14g/cm²

=0.5cm²

i hope this helps

Answer:

[tex]\boxed {\boxed {\sf 0.5 \ or \ \frac {1}{2} \ cm^3}}[/tex]

Explanation:

We are asked to find the volume of a solid given the density and mass. The formula for density is:

[tex]d= \frac {m}{v}[/tex]

We know the solid's density is 14 grams per cubic centimeter and the mass is 7 grams.

Substitute the known values into the formula.

[tex]14 g/cm^3 = \frac{7 \ g}{v}[/tex]

We are solving for the volume of the solid, so we must isolate the variable v. First, cross multiply. Multiply the first numerator by the second denominator, then the first denominator and second numerator.

[tex]\frac {14 g/cm^3}{1} = \frac{7 \ g}{v}[/tex]

[tex]14 \ g/cm^3 * v= 7 \ g * 1[/tex]

[tex]14 \ g/cm^3 * v= 7 \ g[/tex]

Now the variable is being multiplied by 14 grams per cubic centimeters. The inverse operation of multiplication is division, so we divide both sides by 14 g/cm³.

[tex]\frac {14 \ g/cm^3 * v}{14 \ g/cm^3}= \frac {7 \ g }{14 \ g/cm^3}[/tex]

[tex]v= \frac {7 \ g }{14 \ g/cm^3}[/tex]

The units of grams cancel.

[tex]v= \frac {7 }{14 \ cm^3}[/tex]

[tex]v= \frac {1}{2} \ cm^3[/tex]

The volume of the solid is 1/2 or 0.5 cubic centimeters.

Answer: nHCl = 12/36,5= 0,38(mol)

nZn = 6,5/65 = 0,1(mol)

Ta có pt: Zn + 2HCl --> ZnCl2 + H2

Vì 2n Zn = 0,2 < n HCl = 0,38 nên HCl dư

Theo PTHH :

n H2 = n Zn = 0,1(mol)

V H2 = 0,1.22,4 = 2,24(lít)

Explanation:

Answer:

The correct option is;

a. Delocalised electrons

Explanation:

The particles that enable electrical conductivity are the delocalised electrons

The metallic structure consists of identically shaped elements having positive ions that have a resultant alignment, surrounded by a vast array of deloclised electrons, which move freely in the metallic structure such that a metallic part usually has a high electrical conductivity.

Therefore, the freely moving delocalised electron in a metal give them the property of good conductors of electricity.

Answer:

29

Explanation:

Copper is a chemical element with the symbol Cu and atomic number is 29

Explanation:

Answer:

a colloid and a solution

Explanation:

When solute particles completely dissolve in a solvent, a true solution is formed. The solute particles in this case are so little that they can not be seen with naked eyes. A true solution does not scatter rays of light.

In a false solution, the solute particles are larger than the solute particles in true solutions but are not large enough to be seen with naked eyes. False solutions scatter rays of light. False solutions are also called colloids.

The major difference between a solution and a colloid is that colloids scatter light rays (Tyndall effect) while a true solution does not scatter light rays.

Answer:

Explanation:

48000 minutes [ 1 hour  / 60 min ] 1 day / 24 hours ] [365 days / year]

48000 * [ 1/(60 * 24 * 365)]

48000 * [1 / 525600]

There are 0.0930954years in 48000 minutes

Answer: I did the quiz and got it correct

Explanation:  

Biosphere- B  

Ecosystem- C  

Biome- D  

Habitat- A

Scientific Method

What is Scientific Method

A method or procedure that consists of systematic observation, measurement, and experiment, and the formulation, testing, and modification of hypotheses.

Experiment- The growth of green algae is recorded every day for several weeks and compared

Conclusion- Under the same temperature and water conditions, green algae is grown under natural light, blue light, and green light.

Research-Based on what other scientists have done, algae life cycles are affected by light.

Analysis- The data recorded in the experiment supports the hypothesis about how algae reproduce.

For more information visit

https://brainly.com/question/497944

Answer:

Explanation:

[tex]Move \: the\:decimal \:point\:,\\3 \:times\:to\:the \:right = 24\\\\When \:the\:decimal\:point \: moves\\\:to\:the \:right\:it\:becomes\:a \:negative\:power\\\\0.024= 24 \times 10^-^3[/tex]

Answer:

Explanation:

           The world is made up of ​living beings .    

Answer:

The answer is D. Hydrochloric acid solution with a pH of 1.

Explanation:

I just took the same quiz

Hydrochloric acid solution with a pH of 1. Hence, option D is correct.

An acid is an electrolyte that hydrolyses in water to release hydrogen ions.

The lower the pH the greater the concentration of H+ ions. Hydrochloric acid with a pH of 1 is a strong acid and is highly ionised in solution.  It has the most H+ ions.

Hence, option D is correct.

Learn more about acid here:

https://brainly.com/question/13380222

#SPJ5

Answer:

(b) A and C belongs to same group.

(c) D is a non metal.

Explanation:

The Electronic Configuration of E is

[tex]1s {}^{2} 2s {}^{2}2p {}^{6} 3s {}^{2} 3p {}^{6} 4s {}^{2} [/tex]

Answer:

c. 1.0 mole C5H5N and 1.5 mole C5H5NHCl

Explanation:

We can determine pH of a buffer using H-H equation:

pH = pKa + log [A⁻] / [HA]

Where [A⁻] is concentration of conjugate base and [HA] concentration of weak acid. These concentrations can be computed as moles of each species.

We need to determine pKa of both NH₃ and C₅H₅N buffers, thus:

pKb = -log Kb

NH₃ pKb = -log 1.8x10⁻⁵ = 4.74

C₅H₅N pKb = -log 1.7x10⁻⁹ = 8.77

And pKa = 14 - pKb:

NH₃ pKa = 14 - 4.74 = 9.26

C₅H₅N pKb = 14 - 8.77 = 5.23

A buffer works only under pH's between pKa-1 and pKa + 1. As pKa NH₃ buffer is 9.23 is not possible to produce a buffer with pH 5.05 for this system.

Thus, we only will compute the buffers made with C₅H₅N:

c. 1.0 mole C5H5N (Weak base) and 1.5 mole C5H5NHCl (Conjugate acid)

pH = pKa + log [A⁻] / [HA]

pH = 5.23+ log [1.0 moles] / 1.5 moles]

d. 1.5 mole C5H5N and 1.0 mole C5H5NHCl

pH = pKa + log [A⁻] / [HA]

pH = 5.23+ log [1.5 moles] / 1.0 moles]

Right solution is:

Answer:

The mass of 3.491 × 10¹⁹ molecules of Cl₂  of Cl₂ is 4.11 × 10⁻³ grams

Explanation:

The number of particles in one mole of a substance id=s given by the Avogadro's number which is approximately 6.023 × 10²³ particles

Therefore, we have;

One mole of Cl₂ gas, which is a compound, contains 6.023 × 10²³ individual molecules of Cl₂

3.491 × 10¹⁹ molecules of Cl₂ is equivalent to (3.491 × 10¹⁹)/(6.023 × 10²³) = 5.796 × 10⁻⁵ moles of Cl₂

The mass of one mole of Cl₂ = 70.906 g/mol

The mass of 5.796 × 10⁻⁵ moles of Cl₂ = 70.906 × 5.796 × 10^(-5) = 4.11 × 10⁻³ grams

Therefore;

The mass of 3.491 × 10¹⁹ molecules of Cl₂  of Cl₂ = 4.11 × 10⁻³ grams.

Answer:

0,5 seconds = 500 millisecondes

2 km = 200 meters

Explanation:

Answer:

The answer is "6.68 [tex]\frac{ml} {hr}[/tex]".

Explanation:

It's going to be 18.18 kg to turn body mass to kg.  

Size 1mg / kg / hr, therefore = 1 x 18.18

                                               = 18.18 kg / hr  

now we adding 30 mg / ml of dextrose = 30 x 15

                                                                 [tex]=\frac{450mg}{15 ml +150 ml}[/tex]

of dextrose, from 15 ml to 150 ml;  

Therefore, now 450 mg in 165m:    

[tex]= \frac{ 450}{165}\\ \\=2.72 \frac{mg} {ml}[/tex]  

now divide the   18.18 by 2.72:

[tex]=\frac{18.18}{2.72}[/tex]

= 6.68 [tex]\frac{ml} {hr}[/tex]

Answer:

This is called a hypothesis, which can be identified by the if... then... format.

So, the correct option is B. Form a hypothesis.

Let me know if this helps!

Answer:

C

Explanation:

Answer:

Einstein also in 1905 mathematically proved the existence of atoms, and thus helped revolutionize all the sciences through the use of statistics and probability. Atomic theory says that any liquid is made up of molecules (invisible in 1905)

Explanation:

Answer:

The discoveries of Albert Einstein led to development in the understanding of the atom through the study of quantum mechanics and the electron cloud. In this model, there is still a nucleus with protons and neutrons. But unlike the Bohr model, the electrons exist in a cloud outside the nucleus, much like the fruit around the pit of a peach.

Explanation:

you can determine this by

Answer:

High levels of turbidity can affect aquatic life in several ways.

Explanation:

Turbidity is the measure of relative clarity of a liquid. The higher the intensity of scattered light, the higher the turbidity. Material that causes water to be turbid include clay, silt, very tiny inorganic and organic matter, algae, dissolved colored organic compounds, and plankton and other microscopic organisms

Answer:

Distillation:

Distillation is the process in which two or more liquids are separated on the basis of their boiling points.

Process:

Liquid mixture is heated. The liquid which is of low boiling point evaporates first and is condensed separately. This is followed by the liquid having more boiling point than the previous one and so on.

Reason:

A mixture of liquids having almost same boiling points cannot be separated. This is because both the liquids will evaporate at almost the same time when heated and thus, we will obtain the same liquid mixture again. No separation will occur.

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

Answer:

Oxygen does not burn. It is not flammable, but it is an oxidizer.

Explanation

I think you are misunderstanding what is meant by "fire burns up air". Fire does use oxygen when it burns. But it also produces carbon dioxide. An oxygen molecule has two oxygen atoms in it. Fires use this to produce carbon dioxide by adding a single carbon atom from the fire’s fuel (wood, for instance).

hope it'll help:)

Answer:

there are 6 significant figures in 107.051

Answer:

There Are 6 Significant Numbers

Explanation: But some problems stop at the . so it could 3 if im right but go with 6!

Answer:

.75 Tons

Explanation:

1 Ton is equal to 2,000 pounds

The correct statement that describes the relationship between thermal energy and particle movement is "As thermal energy increases, there is more particle movement".

WHAT IS THERMAL ENERGY?

Hence, as thermal energy of substance increases, there is more particle movement of that substance.

Learn more: https://brainly.com/question/24291347