Answer:
Gay lussacs law
Explanation:
Which of the following is an example of a scientific theory?
Matter can be neither created nor destroyed.
Force equals mass times acceleration.
Matter behaves the way it does because it is made of atoms.
There is probably life on Mars.
C. Matter behaves the way it does because it is made of atoms.
Answer:
Matter can neither be created nor destroyed
Explanation:
Mark me. as brainliest
Calculate the energy required to heat 566.0mg of graphite from 5.2°C to 23.2°C. Assume the specific heat capacity of graphite under these conditions is ·0.710J·g−1K−1 . Be sure your answer has the correct number of significant digits.
Answer:
7.23 J
Explanation:
Step 1: Given data
Mass of graphite (m): 566.0 mgInitial temperature: 5.2 °CFinal temperature: 23.2 °CSpecific heat capacity of graphite (c): 0.710J·g⁻¹K⁻¹Step 2: Calculate the energy required (Q)
We will use the following expression.
Q = c × m × ΔT
Q = 0.710J·g⁻¹K⁻¹ × 0.5660 g × (23.2°C-5.2°C)
Q = 7.23 J
g Solution of barium hydroxide reacts with phosphoric acid to produce barium phosphate precipitate and water. How many mL of 6.50 M calcium hydroxide solution are required to react with a phosphoric acid solution of 45.00 mL that has a concentration of 8.70 M protons (hydrogen ions)
Answer:
30.12 mL.
Explanation:
We'll begin by calculating the molarity of the phosphoric acid. This can be obtained as follow:
Phosphoric acid H3PO4 will dissociate in water as follow:
H3PO4(aq) <==> 3H^2+(aq) + PO4^3-(aq)
From the balanced equation above,
1 mole of H3PO4 produces 3 moles of H+.
Therefore, XM H3PO4 will produce 8.70 M H+ i.e
XM H3PO4 = 8.70/3
XM H3PO4 = 2.9 M.
Therefore, the molarity of the acid solution, H3PO4 is 2.9 M.
Next, we shall write the balanced equation for the reaction. This is illustrated below:
2H3PO4 + 3Ba(OH)2 —> Ba3(PO4)2 + 6H2O
From the balanced equation above, we obtained the following:
Mole ratio of the acid, H3PO4 (nA) = 2
Mole ratio of the base, Ba(OH)2 (nB) = 3
Data obtained from the question include the following:
Molarity of base, Ba(OH)2 (Mb) = 6.50 M
Volume of base, Ba(OH)2 (Vb) =.?
Molarity of acid, H3PO4 (Ma) = 2.9 M
Volume of acid, H3PO4 (Va) = 45 mL
The volume of the base, Ba(OH)2 Needed for the reaction can be obtained as follow:
MaVa /MbVb = nA/nB
2.9 x 45 / 6.5 x Vb = 2/3
Cross multiply
2 x 6.5 x Vb = 2.9 x 45 x 3
Divide both side by 2 x 6.5
Vb = (2.9 x 45 x 3) /(2 x 6.5)
Vb = 30.12 mL
Therefore, the volume of the base, Ba(OH)2 needed for the reaction is 30.12 mL
3. Write the following isotope in hyphenated form (e.g., "carbon-14”): Kr
a. Krypton-109
b. Krypton -37
c. Krypton -36
d. Krypton -73
Answer:
Krypton -73
Explanation:
There are 33 known isotopes of krypton (36Kr) with atomic mass numbers from 69 through 101.
Good luck!
Answer:
D. Krypton-73
Explanation:
An isotope of an element has the same atomic number and the same number of protons but a different number of neutrons and a different atomic weight. Krypton is the 36th element on the periodic table. It has 36 protons and 48 neutrons. Krypton-73 is one of 33 known isotopes of Krypton and is the only one that actually exists from the list of choices.
Hope that helps.
Explain the difference between temperature and thermal energy.
Explanation:
the difference between temperature and thermal energy are as follow ,
• The thermal energy, or heat, of an object is obtained by adding up the kinetic energy of all the molecules within it. Temperature is the average kinetic energy of the molecules.
Sean plated an unknown metal onto his silver ring which initially weighed 1.4 g. He constructs an electrolytic cell using his ring as one of the electrodes. After running the cell, 0.022 moles of the unknown metal was plated onto his ring and the mass of the ring increased to 3.137 g. What is the atomic weight of the unknown metal in g/mol
Answer:
79 g/mol
Explanation:
Mass of unknown metal deposited = 3.137 g - 1.4 g = 1.737 g
Number of moles of metal deposited = 0.022 moles
Since;
Number of moles = reacting mass/molar mass
Molar mass = reacting mass/number of moles
Molar mass = 1.737 g/0.022 moles
Molar mass= 79 g/mol
How many atoms of oxygen are in one molecule of water (H2O)? one two four three
Answer:
there is one atom of oxygen and two atoms of hydrogen
Explanation:
Which of the following buffer systems would be the best choice to create a buffer with pH 9.10?
a) HF/KF (pKa = 3.14)
HNO2/KNO2 (pKa = 3.39)
NH3/NH4Cl (pKa = 9.25)
HClO/KClO (pKa = 7.46)
b) for the best buffer system, calculate the ratio of the molarities of the buffer components required to make the buffer
c) for the best buffer system, calculate the ratio of the masses of the buffer components required to make 1.00 L of the buffer
Answer:
a) NH3/NH4Cl (pKa = 9.25)
b) [tex]\frac{[Base]}{[Acid]} =0.708[/tex]
c)
Explanation:
Hello,
a) In this case, for a buffering capacity, if we want to select the best buffer, we should ensure that the buffer's pKa approaches the desired pH, therefore, since the buffer NH3/NH4Cl has a pKa of 9.25 that is very close to the desired pH of 9.10, we can pick it as the best choice.
b) In this case, we use the Henderson-Hasselbach equation in order to compute the molar ratio:
[tex]pH=pKa+log(\frac{[Base]}{[Acid]} )\\\\log(\frac{[Base]}{[Acid]} )=9.10-9.25=-0.15\\\\\frac{[Base]}{[Acid]} =10^{-0.15}\\\\\frac{[Base]}{[Acid]} =0.708[/tex]
c) Finally, for the ratio of masses, we use the molar mass of both ammonia as the base (17 g/mol) and ammonium chloride as the acid (53.45 g/mol) to compute it, assuming 1.00 L as the volume of the solution:
[tex]\frac{m_{Base}}{m_{Acid}} =0.708\frac{molBase}{molAcid}*\frac{17gBase}{1molBase} *\frac{1molAcid}{53.45gAcid}\\ \\\frac{m_{Base}}{m_{Acid}} =0.225[/tex]
Regards.
The best choice to create a buffer with pH 9.10 is NH₃/NH₄Cl (pKa=9.25), ratio of molarities and masses for NH₃/NH₄Cl are 0.708 & 0.225 respectively.
How do we calculate the pH of buffer solution?pH of buffer solution will be calculated by using the Henderson Hasselbalch equation as:
pH = pKa + log([base]/[acid])
From the above reaction it is clear that valu of pH is directly proportional to the value of pKa. So, the pKa value for NH₃/NH₄Cl is comparatively high which will close to the 9.10 pH.Ratio of the molarities for the NH₃/NH₄Cl buffer solution will be calculated by using the Henderson Hasselbalch equation as:log([NH₃]/[NH₄Cl]) = 9.10 - 9.25 =
log([NH₃]/[NH₄Cl]) = -0.15
[NH₃]/[NH₄Cl] = [tex]10^{-0.15}[/tex] = 0.708
Ratio of masses for the NH₃/NH₄Cl buffer solution will be calculated by using the below equation as:M = n/V, where
M = molarity
V = volume = 1L
n = moles = W(mass) / M(molar mass)
Mass(NH₃)/Mass(NH₄Cl) = 0.708 {(mol of NH₃×17g of NH₃NH₃) /
(mol of NH₄Cl×53.45g of NH₄Cl)
Mass(NH₃)/Mass(NH₄Cl) = 0.225
Hence required values are calculated above.
To know more about Henderson Hasselbalch equation, visit the below link:
https://brainly.com/question/13651361
If a sample of C-14 initially contains 1.6 mmol of C-14, how many millimoles will be left after 2250 years
Answer: 1.2 millimoles will be left after 2250 years
Explanation:
Expression for rate law for first order kinetics is given by:
[tex]t=\frac{2.303}{k}\log\frac{a}{a-x}[/tex]
where,
k = rate constant
t = age of sample
a = let initial amount of the reactant
a - x = amount left after decay process
a) for completion of half life:
Half life is the amount of time taken by a radioactive material to decay to half of its original value.
[tex]t_{\frac{1}{2}}=\frac{0.693}{k}[/tex]
[tex]k=\frac{0.693}{5730}=0.00012years^{-1}[/tex]
b) Amount left after 2250 years
[tex]2250=\frac{2.303}{k}\log\frac{1.6}{a-x}[/tex]
[tex]2250=\frac{2.303}{0.00012}\log\frac{1.6}{a-x}[/tex]
[tex]\log\frac{1.6}{a-x}=0.117[/tex]
[tex]\frac{1.6}{a-x}=1.31[/tex]
[tex]{a-x}=\frac{1.6}{1.31}=1.2[/tex]
Thus 1.2 millimoles will be left after 2250 years
An SN2 reaction is a type of _____________ in which the nucleophile attacks the electrophile.
Answer:
A bimolecular nucleophilic substitution (SN2) reaction is a type of nucleophilic substitution whereby a lone pair of electrons on a nucleophile attacks an electron deficient electrophilic center and bonds to it, resulting in the expulsion of a leaving group.
Calculate the molarity of bromide ions in 250. mL of a solution containing 25.9 g NaBr and 0.155 moles of HBr.
Answer:
[tex]1.628 M[/tex]
Explanation:
From the question we were given 0.155 moles of HBr, but Br and H are in ratio 1:1, then there are 0.155 moles of Br- ions.
We were also told that the solution contain NaBr, of 25.9 g. Then it must be converted to moles.
molar mass of NaBr =(22.99g + 79.90 )
= 102.89 g per mol.
the moles of NaBr can be calculated as 25.9 / 102.89
=0.252 moles
But Na and Br are in a ratio 1:1 , then there are 0.252 moles of Br-.
Then to get two Br- mol , we will add the first and second mol of Br- together
= 0.155 + 0.252
=0.407 moles.
The given solution has volume of 250 mL, but we know that there are 1000 ml in a liter, then if we convert to L for unit consistency we have
= 250/1000
= 0.25 L
molarity=0.407 moles/0.25 L
= 1.628 M.
Therefore, Br ion molarity is 1.628 M.
The molarity of the Br ions in the 250 ml solution has been 1.628 M.
Moles can be defined as the mass per unit molecular mass. Moles can be expressed as:
Moles = [tex]\rm \dfrac{weight}{molecular\;weight}[/tex]
Moles of NaBr = [tex]\rm \dfrac{25.9}{102.89}[/tex]
Moles of NaBr = 0.252 mol
Moles of HBr = 0.155 mol.
Since both the compounds have 1:1 ratio of atom: Br, the Br produced has been equal to the concentration of the compound.
Br from NaBr = 0.252 mol
Br from HBr = 0.155 mol.
Total Br ions = 0.407 mol.
Molarity can be expressed as:
Molarity = [tex]\rm moles\;\times\;\dfrac{1000}{Volume\;(ml)}[/tex]
Molarity of Br ions = 0.407 × [tex]\rm \dfrac{1000}{250\;ml}[/tex]
Molarity of Br ions = 1.628 M.
The molarity of the Br ions in the 250 ml solution has been 1.628 M.
For more information about the molarity, refer to the link:
https://brainly.com/question/12127540
Nombre de la siguiente estructura de compuesto orgánico
Answer:
Nombre de la siguiente estructura de compuesto orgánico
Explanation:
When 0.100 M NaOH is titrated with 25.00 mL 0.0500 M HBr, which of the following is correct for this titration?
A. Initially the pH will be less than 1.00.
B. The pH at the equivalence point will be 7.00.
C. It will require 12.50 mL of NaOH to reach the equivalence point.
When 0.100 M NaOH is titrated with 25.00 mL 0.0500 M HBr, which of the following is correct for this titration?
A. Initially the pH will be less than 1.00.
B. The pH at the equivalence point will be 7.00.
C. It will require 12.50 mL of NaOH to reach the equivalence point.
a)A, C
b) A, B
c) B, C
d) B
Answer:
c) B, C
Explanation:
NaOH(aq) + HBr(aq) -----> NaBr(aq) +H2O(l)
1) concentration of acid CA= 0.05 M
Concentration of base CB= 0.1 M
Volume of acid VA= 25.00ml
Volume of base VB= unknown
Number of moles of acid NA= 1
Number of moles of base NB= 1
CAVA/CBVB = NA/NB
CAVANB =CBVBNA
VB= CAVANB/CB NB
VB= 0.05 × 25 × 1/ 0.1 ×1
VB= 12.5 ML
2.
Solid sodium iodide is slowly added to a solution that is 0.0050 M Pb 2+ and 0.0050 M Ag +. [K sp (PbI 2) = 1.4 × 10 –8; K sp (AgI) = 8.3 × 10 –17] Calculate the Ag + concentration when PbI 2 just begins to precipitate.
Answer:
[Ag⁺] = 5.0x10⁻¹⁴M
Explanation:
The product solubility constant, Ksp, of the insoluble salts PbI₂ and AgI is defined as follows:
Ksp(PbI₂) = [Pb²⁺] [I⁻]² = 1.4x10⁻⁸
Ksp(AgI) = [Ag⁺] [I⁻] = 8.3x10⁻¹⁷
The PbI₂ just begin to precipitate when the product [Pb²⁺] [I⁻]² = 1.4x10⁻⁸
As the initial [Pb²⁺] = 0.0050M:
[Pb²⁺] [I⁻]² = 1.4x10⁻⁸
[0.0050] [I⁻]² = 1.4x10⁻⁸
[I⁻]² = 1.4x10⁻⁸ / 0.0050
[I⁻]² = 2.8x10⁻⁶
[I⁻] = 1.67x10⁻³So, as the [I⁻] concentration is also in the expression of Ksp of AgI and you know concentration in solution of I⁻ = 1.67x10⁻³M:
[Ag⁺] [I⁻] = 8.3x10⁻¹⁷
[Ag⁺] [1.67x10⁻³] = 8.3x10⁻¹⁷
[Ag⁺] = 5.0x10⁻¹⁴MWhat is the frequency of a photon having an energy of 4.91 × 10–17 ? (c = 3.00 × 108 m/s, h = 6.63 × 10–34 J · s)
Answer:
The frequency of the photon is 7.41*10¹⁶ Hz
Explanation:
Planck states that light is made up of photons, whose energy is directly proportional to the frequency of radiation, according to a constant of proportionality, h, which is called Planck's constant. This is expressed by:
E = h*v
where E is the energy, h the Planck constant (whose value is 6.63*10⁻³⁴ J.s) and v the frequency (Hz or s⁻¹).
So the frequency will be:
[tex]v=\frac{E}{h}[/tex]
Being E= 4.91*10⁻¹⁷ J and replacing:
[tex]v=\frac{4.91*10^{-17} J}{6.63*10^{-34} J.s}[/tex]
You can get:
v= 7.41*10¹⁶ [tex]\frac{1}{s}[/tex]= 7.41*10¹⁶ Hz
The frequency of the photon is 7.41*10¹⁶ Hz
1. What happens to global temperature averages that start an ice age?
Answer:
Around 46° F (7.8° C)
Explanation:
"Scientists have predicted that the global average temperature during the ice age was around 46 degrees Farenheit (7.8 degrees Celsius.) However, the polar regions were far colder, around 25 degrees Fahrenheit (14 degrees Celsius) colder than the global average."
Source: http://www.weforum.org
Name the following alkane molecule:
Br
CI
A. 6-bromo-2-chlorodecane
B. 2-chloro-6-bromodecane
C. 5-bromo-9-chlorodecane
Answer:
6- bromo- 2-chlorodecane
The name of molecule is 6- bromo- 2-chlorodecane.
What is 6- bromo- 2-chlorodecane?
It is organic molecule. There are 10 carbon present in this molecule. The bromine atom is attached with C-6 carbon where chlorine is attached with C-2 carbon.
What is molecule?A molecule is a collection of more than one atom bound together by chemical bonds; depending on the context, the phrase may or may not include ions that meet this requirement.
Therefore, the name of the given molecule will be 6- bromo- 2-chlorodecane
To know more about molecule and 6- bromo- 2-chlorodecane.
https://brainly.com/question/19922822
#SPJ2
What was one important discovery that the Curies made?
O A material's radioactivity cannot be changed by altering the material physically
O A material's radioactivity can be weakened or intensified by changing it chemically.
O Radioactive materials generally contain radium or polonium.
O Radioactive materials are found only in the form of salts.
Answer:
C is the answer to your question
Which of these species would you expect to have the lowest standard entropy (S°)?
a. CH4(g)
b. H2O(g)
c. NH3(g)
d. HF(g)
Answer:
d. HF(g)
Explanation:
Hello,
In this case, the standard entropy S° could be predicted by looking at the amount of bonds the compound has, thus, the fewer the number bonds, the lower the standard entropy, it means that d. HF(g) has lowest value as it has one bond only whereas methane has four bonds, water two bonds and ammonia three bonds.
Best regards.
Suppose a student completes an experiment with an average value of 2.9 mL and a calculated standard deviation of 0.71 mL. What is the minimum value within a 1 SD range of the average
Answer:
The correct answer is 2.2 mL.
Explanation:
Given:
Average: 2.9 mL
SD: 0.71 mL
We can define a 1 SD range in which the value of volume (in mL) will be comprised:
Volume (mL) = Average ± SD = (2.9 ± 0.7) mL
Maximum value= Average + SD= 2.9 + 0.7 mL = 3.6 mL
Minimum value= Average - SD = 2.9 - 0.7 mL = 2.2 mL
Thus, the minimum value within a 1 SD range of the average is 2.2 mL
The minimum value within 1 SD is 2.19 mL
The z score is used to determine by how many standard deviations the raw score is above or below the mean. The z score is given by:
[tex]z=\frac{x-\mu}{\sigma} \\\\where\ x\ is\ raw\ score, \mu=mean,\sigma=standard\ deviation[/tex]
Given that μ = 2.9 mL, σ = 0.71 mL; hence:
The minimum value within 1 SD range = μ ± σ = 2.9 ± 0.71 = (2.19, 3.61)
Therefore the minimum value within 1 SD is 2.19 mL
Find out more at: https://brainly.com/question/23907081
Determine which choice is an example of an endothermic process.
O A. Lighting a match
B. Respiration
C. Running a gas engine
D. Baking bread
Answer:
D. Baking bread
Explanation:
In this process, energy is absorbed and in an endothermic process energy is absorbed too.
Baking bread is an example of an endothermic process, therefore option (d) is correct .
What do you mean by endothermic process ?Endothermic reactions are chemical processes in which the reactants absorb heat from the environment to produce products.
An endothermic reaction is accompanied by an absorption of heat.
Endothermic reactions cause a cooling effect by lowering the temperature of the surrounding environment.
A decrease in temperature can be observed with the progression of the reaction. The reaction is non-spontaneous in endothermic reactions .
Baking bread is an example of an endothermic process, hence option (d) is correct .
Learn more about endothermic process ,here:
https://brainly.com/question/23184814
#SPJ5
PLEASE HELP!!
this is on USAtestprep
a)
b)
c)
d)
Answer:
C.
Explanation:
In warm air, stuff expands, and in cold air, things condense, or decrease in size.
A compound is found to contain 31.42 % sulfur, 31.35 % oxygen, and 37.23 % fluorine by weight. To answer the questions, enter the elements in the order presented above. 1. What is the empirical formula for this compound? 2. The molecular weight for this compound is 102.1 g/mol. What is the molecular formula for this compound?
Explanation:
To obtain the empirical and molecular formula of this compound from the percent composition of the elements, we follow the steps below;
Step 1: Divide the percentage composition by the atomic mass
Sulphur = 31.42 / 32 = 0.9819
Oxygen = 31.35 / 16 = 1.9594
Flourine = 37.23 / 19 = 1.9595
Step 2: Divide by the lowest number
Sulphur = 0.9819 / 0.9819 = 1
Oxygen = 1.9594 / 0.9819 ≈ 2
Flourine = 1.9595 / 0.9819 ≈ 2
This means the ratio of the elements is 1 : 2: 2
The empirical formular (simplest formular of a compound) of the compound is;
SO₂F₂
To obtain the molecular formular (Actual formular of a compound);
(SO₂F₂)n = 102.1
Inserting the atomic masses and solving for n;
(102)n = 102.1
n ≈ 1
The molecular formular is; (SO₂F₂)₁ = SO₂F₂
Indicate the peptides that would result from cleavage by the indicated reagent: a. Gly-Lys-Leu-Ala-Cys-Arg-Ala-Phe by trypsin b. Glu-Ala-Phe-Gly-Ala-Tyr by chymotrypsin
Answer:
a. Gly-Lys + Leu-Ala-Cys-Arg + Ala-Phe
b. Glu-Ala-Phe + Gly-Ala-Tyr
Explanation:
In this case, we have to remember which peptidic bonds can break each protease:
-) Trypsin
It breaks selectively the peptidic bond in the carbonyl group of lysine or arginine.
-) Chymotrypsin
It breaks selectively the peptidic bond in the carbonyl group of phenylalanine, tryptophan, or tyrosine.
With this in mind in "peptide a", the peptidic bonds that would be broken are the ones in the "Lis" and "Arg" (See figure 1).
In "peptide b", the peptidic bond that would be broken is the one in the "Phe" (See figure 2). The second amino acid that can be broken is tyrosine, but this amino acid is placed in the C terminal spot, therefore will not be involved in the hydrolysis.
Which of the following ionic lattices would have the highest melting point?
A. Potassium oxide
w
B. Boron nitride
C. Beryllium oxide
D. Lithium chloride
Answer:
I think, berryllium oxide, is answer.Explanation:
Hope it helps you....The ionic lattices would have the highest melting point Potassium oxide. option A is correct.
what is ionic lattice?An ionic compound is a giant structure of ions. The ions have a regular, repeating arrangement called an ionic lattice. The lattice is formed because the ions attract each other and form a regular pattern with oppositely charged ions next to each other.
Ionic compounds are held together by electrostatic forces between oppositely charged ions.
These forces are usually referred to as the ionic lattice contains such a large number of ions, that a lot of energy is needed to overcome this ionic bonding so ionic compounds have high melting and boiling points.
therefore, sodium oxide has the highest melting point. option A is correct
Learn more about ionic lattice here:
https://brainly.com/question/27549049
#SPJ2
1. What volume in milliliters of 0.100 M HClO₃ is required to neutralize 40.0 mL of 0.140 M KOH? 2. A 25.0 mL solution of HNO₃ is neutralized with 15.7 mL of 0.250 M Ba(OH)₂. What is the concentration of the original HNO₃ solution?
Answer:
The correct answer is 1) 56 ml and 2) 0.314 M
Explanation:
1. The reaction taking place in the given case is,
HClO₃ + KOH ⇒ KClO₃ + H2O, the molarity of HClO₃ given is 0.100 M, the molarity of KOH given is 0.140 M and the volume of KOH given is 40 ml, there is a need to find the volume of HClO₃.
Therefore, the mole of HClO₃ = mole of KOH
= MHClO₃ × VHClO₃ = MKOH × VKOH
= 0.100 M × VHClO₃ = 0.140 M × 40 ml
VHClO₃ = 0.140 M × 40 ml/0.100 M
VHClO₃ = 56 ml.
2. The reaction taking place is,
2HNO₃ + Ba(OH)₂ ⇒ Ba(NO₃)₂ + 2H₂O
The volume of HNO₃ given is 25 ml, the molarity of Ba(OH)2 is 0.250 M, the volume of Ba(OH)2 is 15.7 ml, the n or the number of moles of HNO₃ is 2, and the n of Ba(OH)2 is 1, the concentration or M of HNO₃ is,
M₁V₁/n₁ = M₂V₂/n₂
M₁ × 25/ 2 = 0.25 × 15.7/1
M₁ or molarity of HNO₃ = 0.314 M
1. The volume of HClO₃ required to neutralize the KOH is 56.0 mL
2. The concentration of the original HNO₃ solution is 0.314 M
1.
First, we will write a balanced chemical equation for the reaction
The balanced chemical equation for the reaction is
HClO₃ + KOH → KClO₃ + H₂O
This means,
1 mole of HClO₃ is required to neutralize 1 mole of KOH
From the titration formula
[tex]\frac{C_{A}V_{A} }{C_{B}V_{B}} = \frac{n_{A}}{n_{B}}[/tex]
Where
[tex]C_{A}[/tex] is the concentration of acid
[tex]C_{B}[/tex] is the concentration of base
[tex]V_{A}[/tex] is the volume of acid
[tex]V_{B}[/tex] is the volume of base
[tex]n_{A}[/tex] is the mole ratio of acid
[tex]n_{B}[/tex] is the mole ratio of base
From the given information,
[tex]C_{A} = 0.100 \ M[/tex]
[tex]C_{B} = 0.140 \ M[/tex]
[tex]V_{B} = 40.0 \ mL[/tex]
From the balanced chemical equation
[tex]n_{A} = 1[/tex]
[tex]n_{B} =1[/tex]
Putting the values into the formula, we get
[tex]\frac{0.100 \times V_{A} }{0.140 \times 40.0} = \frac{1}{1}[/tex]
∴ [tex]0.100 \times V_{A} = 0.140 \times 40.0[/tex]
[tex]V_{A}=\frac{0.140\times 40.0}{0.100}[/tex]
[tex]V_{A}=\frac{5.60}{0.100}[/tex]
[tex]V_{A}=56.0 \ mL[/tex]
Hence, the volume of HClO₃ required to neutralize the KOH is 56.0 mL
2.
First, we will write the balanced chemical equation for the reaction
The balanced chemical equation for the reaction is
2HNO₃ + Ba(OH)₂ → Ba(NO₃)₂ + 2H₂O
This means, 2 mole of HNO₃ is required to neutralize 1 mole Ba(OH)₂
From the given information,
[tex]V_{A} = 25.0\ mL[/tex]
[tex]C_{B} = 0.250 \ M[/tex]
[tex]V_{B} = 15.7 \ mL[/tex]
From the balanced chemical equation
[tex]n_{A} = 2[/tex]
[tex]n_{B} =1[/tex]
Also, Using the titration formula
[tex]\frac{C_{A}V_{A} }{C_{B}V_{B}} = \frac{n_{A}}{n_{B}}[/tex]
We get
[tex]\frac{C_{A} \times 25.0 }{0.250 \times 15.7} = \frac{2}{1}[/tex]
Then,
[tex]C_{A} = \frac{2\times 0.250 \times 15.7} {1 \times 25.0}[/tex]
[tex]C_{A} =\frac{7.85}{25.0}[/tex]
[tex]C_{A} =0.314 \ M[/tex]
Hence, the concentration of the original HNO₃ solution is 0.314 M
Learn more here: https://brainly.com/question/16870772
Atoms are indivisible spheres. 1.plum pudding model 2.Dalton model 3.Bohr model
Answer: 2. Dalton Model
Explanation:
John Dalton proposed that atoms are indivisible spheres. Although his model of an atom was not entirely new to the scientific world since the ancient Greeks has made a similar statement in the past ( all matter are made up of small indivisible particle called atom).
As of when Dalton proposed his model of an atom, electrons and nucleus where yet to be discovered.
Describe the factors influencing chemical bonds and the
characteristics of an ionic and a covalent bond.
Explanation:
factors affecting chemical bonds
a. electronegativity difference
b. size
c. charges
characteristics of Ionic bond
a. high melting point
b. they are soluble in polar solvents
c. they don't conduct electricity in solid state
characteristics of covalent bonds
a. they are insoluble in polar solvents
b. they don't conduct electricity
c. low melting point
What is the initial temperature (°C) of a system that has the pressure decreased by 10 times while the volume increased by 5 times with a final temperature of -123°C?
Answer:
27°C or 300K
Explanation
We were told that the pressureof the system decreased by 10 times implies that P2= P1/10
Where P2=final pressure
P1= initial pressure
Wew were also told that the volume of the system increased by 5 times this implies that V2= 5×V1
Where T2= final temperature =-123C= 273+(-123C)=150K
T1= initial temperature
But from gas law
PV=nRT
As n and R are constant
P1V1/T1 = P2V2/T2
T1= P1V1T2/P2V2
T1=2×T2
T1=2×150
T1=300K
=300-273
=27°C
the initial temperature (°C) of a system is 27°C
Im really confused and select all that apply questions scare me.
Answer:
The 3rd one
Explanation: