which one is more powerful hydrogen bomb or atom bomb and why?​

Answer:

Hey there!

PE=mgh, so as height decreases, so does the potential energy.

KE=mv^2, so as velocity increases, kinetic energy increases.

Thus, the correct answer would be Decreases, Increases.

Let me know if this helps :)

Answer:

6.9kgm²

Explanation:

For an axis through the center of the rectangle, I = m[(w²+L²)/12

Using the parallel axis theorem, the added value of I = mR² = m[(w²/4 + L²/4]

Adding the 2 expressions,

I = (m/3)*(w²+L²)

I =6.95 kg∙m²

Answer:

At 3 meter distance, the per-second count is 222.22 and at a 10 meter distance, the per-second count is 20.

Explanation:

The number of particles (N)  counts are inversely proportional to the distance between the source and the detector.  

By using the below formula we can find the number of counts.

[tex]N2 = \frac{(D1)^2}{(D2)^2} \times N1 \\N1 = 2000 \\D 1 = 1 \ meter \\D2 = 3 \\[/tex]

The number of count per second, when the distance is 3 meters.

[tex]= \frac{1}{3^2} \times 2000 \\= 222.22[/tex]

Number of count per second when the distance is 10 meters.

[tex]= \frac{1}{10^2} \times 2000 \\= 20[/tex]

Answer:

The  speed of the water wave is [tex]v = 88 \ m/s[/tex]

Explanation:

From the question we are told that

      The  width of the tube is  [tex]L = 55 \ m[/tex]

     The fundamental  frequency is  [tex]f = 0.80 \ Hz[/tex]

Generally the fundamental frequency is mathematically represented as

      [tex]f = \frac{v}{2 * L }[/tex]

=>    [tex]v = f * 2 * L[/tex]

substituting values

       [tex]v = 0.8 * 2 * 55[/tex]

       [tex]v = 88 \ m/s[/tex]

The speed of the water wave will be 88 m/s.

Given information:

When you slosh the water back and forth in a tub at just the right frequency, the water alternately rises and falls at each end, remaining relatively calm at the center.

The frequency of the standing wave is [tex]f=0.8[/tex] Hz.

The width of the tub is [tex]w=55[/tex] m.

Let v be the speed of the standing wave.

The speed of the wave can be calculated as,

[tex]v=2wf\\v=2\times 55\times 0.8\\v=88\rm\; m/s[/tex]

Therefore, the speed of the water wave will be 88 m/s.

For more details, refer to the link:

https://brainly.com/question/1967686

Answer:

A)a red giant star

Answer:

total current = 12.417 A

so it will not fuse as current is less than 15 A

Explanation:

given data

toaster = 1140-W

blender = 270-W

lamp = 80-W

voltage = 120 V

solution

we know that current is express as

current = power ÷ voltage   ......................1

here voltage is same in all three device

so

current by toaster is

I = [tex]\frac{1140}{120}[/tex]

I = 9.5 A

and

current by blender

I = [tex]\frac{270}{120}[/tex]

I = 2.25 A

and

current by lamp is

I = [tex]\frac{80}{120}[/tex]

I = 0.667 A

so here device in parallel so

total current is = 9.5 A + 2.25 A + 0.667 A

total current = 12.417 A

so it will not fuse as current is less than 15 A

Answer:

bcz we want to have fun there lolol

Answer:

for emergency, treatment, medicines,etc.....

Answer:

Explanation:

Answer:

quantum entanglement is thought to be one of the trickiest concepts in science, but the core issues are simple. And once understood, entanglement opens up a richer understanding of concepts such as the “many worlds” of quantum theory.

Explanation:

Answer:

The magnification is  [tex]m = 12[/tex]

Explanation:

From the question  we are told that

   The object distance is [tex]u = 36.2 \ cm[/tex]

     The focal length is  [tex]v = 39.5 \ cm[/tex]

From the lens equation we have that

         [tex]\frac{1}{f} = \frac{1}{u} + \frac{1}{v}[/tex]

=>     [tex]\frac{1}{v} = \frac{1}{f} - \frac{1}{u}[/tex]

substituting values

       [tex]\frac{1}{v} = \frac{1}{39.5} - \frac{1}{36.2}[/tex]

       [tex]\frac{1}{v} = -0.0023[/tex]

=>   [tex]v = \frac{1}{0.0023}[/tex]

=>   [tex]v =-433.3 \ cm[/tex]

The magnification is mathematically represented as

         [tex]m =- \frac{v}{u}[/tex]

substituting values

        [tex]m =- \frac{-433.3}{36.2}[/tex]

         [tex]m = 12[/tex]

Answer:

Answer in explanation

Explanation:

Water is mainly used as coolant in heating systems like hot-water radiators. The main function of water in such systems, is to absorb as much heat as possible, in order to decrease the temperature of the system and as a result cool it.

The specific heat capacity is the measure of heat energy that is required to raise the temperature of unit mass of a substance through 1 °C. In other words, specific heat capacity quantifies the amount of heat that can be stored by a unit mass of a substance having a degree rise in temperature.

Thus, the more specific heat a substance has, the more heat it can absorb from the hot system. Hence, the specific heat capacity of a coolant must be high.

This is the reason why water, with its high specific heat capacity, is utilized for heating systems, such as radiators.

Image is missing, so i have attached it

Answer:

19.04 × 10⁻⁴ T in the +x direction

Explanation:

We are told that the point P which is equidistant from the wires. (R = 5.00 cm). Thus distance from each wire to O is R.

Hence, the magnetic field at P from each wire would be; B = μ₀I/(2πR)

We are given;

I = 2.4 A

R = 5 cm = 0.05 m

μ₀ is a constant = 4π × 10⁻⁷ H/m

B = (4π × 10⁻⁷ × 2.4)/(2π × 0.05)

B = 9.6 × 10⁻⁴ T

To get the direction of the field from each wire, we will use Flemings right hand rule.

From the diagram attached:

We can say the field at P from the top wire will point up/right

Also, the field at P from the bottom wire will point down/right

Thus, by symmetry, the y components will cancel out leaving the two equal x components to act to the right.

If the mid-point between the wires is M, the the angle this mid point line to P makes with either A or B should be same since P is equidistant from both wires.

Let the angle be θ

Thus;

sin(θ) = (1.3/2)/5

θ = sin⁻¹(0.13) = 7.47⁰

The x component of each field would be:

9.6 × 10⁻⁴cos(7.47) = 9.52 × 10⁻⁴ T

Thus, total field = 2 × 9.52 × 10⁻⁴ = 19.04 × 10⁻⁴ T in the +x direction

The magnitude of the magnetic field at the point P will be "9.6 × 10⁻⁴ T".

The region of the environment close to something like a magnetic entity or a current-carrying body wherein this same magnetic forces caused by the body as well as a current might well be sensed.

According to the question,

Current, I = 2.4 A

Radius, R = 5 cm or,

                = 0.05 m

Constant, μ₀ = 4π × 10⁻⁷ H/m

We know the relation,

The magnetic field, B = [tex]\frac{\mu_0 I}{2 \pi R}[/tex]

By substituting the values in the above relation, we get

                                    = [tex]\frac{4 \pi\times 10^{-7}\times 2.4}{2 \pi\times 0.05}[/tex]

                                    = 9.6 × 10⁻⁴ T

Thus the above answer is appropriate.

Find out more information about magnetic field here:

https://brainly.com/question/14411049

Answer:

photon density = 1.0 × [tex]10^{16}[/tex] photon/m³

Explanation:

given data

frequency f = 100 mhz = 100 × [tex]10^{6}[/tex] Hz

we consider here intensity I = 0.2 W/m²

solution

we take here plank constant is h i.e = 6.626 × [tex]10^{-34}[/tex] s

and take energy density is E

so here

E × C = I  

E = [tex]\frac{I}{C}[/tex]   ................1

here C = 3 × [tex]10^{8}[/tex] m/s

so photon density is

photon density = [tex]\frac{I}{C} \times \frac{1}{f \times h}[/tex]     ...............2

photon density = [tex]\frac{0.2}{3 \times 10^8} \times \frac{1}{100 \times 10^6 \times 6.626 \times 10^{-34} }[/tex]

photon density = 1.0 × [tex]10^{16}[/tex] photon/m³

Answer:

f. 80 and 90

Explanation:

1 x 10⁻¹² W/m² sound intensity falls within 0 sound level

1 x 10⁻¹¹ W/m² sound intensity falls within 10 sound level

1 x 10⁻¹⁰ W/m² sound intensity falls within 20 sound level

1 x 10⁻⁹ W/m² sound intensity falls within 30 sound level

1 x 10⁻⁸ W/m² sound intensity falls within 40 sound level

1 x 10⁻⁷ W/m² sound intensity falls within 50 sound level

1 x 10⁻⁶ W/m² sound intensity falls within 60 sound level

1 x 10⁻⁵ W/m² sound intensity falls within 70 sound level

1 x 10⁻⁴ W/m² sound intensity falls within 80 sound level

1 x 10⁻³ W/m² sound intensity falls within 90 sound level

Given sound intensity (3.66 x 10⁻⁴ W/m²) falls with 1 x 10⁻⁴ W/m² of intensity which is within 80 and 90 sound level.

f. 80 and 90

Answer:

1.6×10²⁰

Explanation:

An ampere is a Coulomb per second.

1 A = 1 C / s

The amount of charge after 5 seconds is:

5.0 A × 5 s = 25 C

The number of electrons is:

25 C × (1 electron / 1.6×10⁻¹⁹ C) = 1.6×10²⁰ electrons

Answer:

The separation of the two slits is 0.456 mm.

Explanation:

Given the wavelength of light = 519 nm

The indifference pattern = 4.6 m

Adjacent bright fringes = 5.2 mm

In the interference, the equation required is Y = mLR/d

Here, d sin theta = mL

L = wavelgnth

For bright bands, m is the  order = 1,2,3,4  

For dark bands,  m = 1.5, 2.5, 3.5, 4.5

R = Distance from slit to screen (The indifference pattern)

Y = Distance from central spot to the nth  order fringe or fringe width

Thus,  here d = mLR/Y

d = 1× 519nm × 4.6 / 5.2mm

d = 0.459 mm

Answer:

y = 1/2at^2

we could also write it as-

y = (at^2)/2

2y = at^2

2y/a = t^2

√2y/a = t

hope it helps

Answer:

The tension in the cord provides by centripetal force

T = Fc

= mv^2/r

= 2kg ( 6)^2/2

=36 N

Answer:

option D thinking so

Explanation:

okay na your whish

Answer:

None of the above

Explanation:

The formula of the magnetic field of a point next to a wire with current is:

B = 2×10^(-7) × ( I /d)

I is the intensity of the current.

d is the distance between the wire and the point.

● B = 2*10^(-7) × (20/5) = 8 ×10^(-7) T

Answer:

Knowledge of vectors is important because many quantities used in physics are vectors. If you try to add together vector quantities without taking into account their direction you'll get results that are incorrect.

Explanation:

An example of the importance of vector addition could be the following:

Two cars are involved in a collision. At the time of the collision car A was travelling at 40 mph, car B was travelling at 60 mph. Until I tell you in which directions the cars were travelling you don't know how serious the collision was.

The cars could have been travelling in the same direction, in which case car B crashed into the back of car A, and the relative velocity between them was 20 mph. Or the cars could have been travelling in opposite directions, in which case it was a head on collision with a relative velocity between the cars of 100 mph!

Answer:

Explanation:

The phase angle of an RLC circuit  ϕ is expressed as shoen below;

ϕ = [tex]tan^{-1} \dfrac{X_l-X_c}{R}[/tex]

Xc is the capacitive reactance = 1/2πfC

Xl is the inductive reactance = 2πfL

R is the resistance = 25.0Ω

Given C = 35.5 μF, L = 0.0940 H, and frequency f = 70.0Hz

Xl = 2π * 70*0.0940

Xl = 41.32Ω

For the capacitive reactance;

Xc = 1/2π * 70*35.5*10⁻⁶

Xc = 1/0.0156058

Xc = 64.08Ω

Phase angle ϕ = [tex]tan^{-1} \frac{41.32-64.08}{25} \\\\[/tex]

ϕ = [tex]tan^{-1} \frac{-22.76}{25} \\\\\\\\[/tex]

[tex]\phi = tan^{-1} -0.9104\\\\\phi = -42.31^0[/tex]

Since tan is negative in the 2nd quadrant;

[tex]\phi = 180-42.31^0\\\\\phi = 137.69^0[/tex]

Hence the phase angle ϕ of the circuit in degrees is 137.69°

The phase angle ϕ of the series RLC circuit that is driven at a frequency of 70.0 Hz is ϕ = 137.69°

Given that:

capacitance C = 35.5 μF,

Inductance L = 0.0940 H,

The resistance R = 25.0Ω

and frequency f = 70.0Hz

The capacitive reactance is given by:

Xc = 1/2πfC

Xc = 1/2π × 70 × 35.5× 10⁻⁶

Xc = 1/0.0156058

Xc = 64.08Ω

The inductive reactance is given by:

Xl = 2πfL

Xl = 2π × 70 × 0.0940

Xl = 41.32Ω

The phase angle of an RLC circuit ϕ  is given by:

[tex]\phi=tan^{-1}\frac{X_l-X_c}{R}\\\\\phi=tan^{-1}\frac{41.32-64.08}{25}[/tex]

Ф = -42.31°

Since tan is negative in the 2nd quadrant, thus:

ϕ = 180° - 42.31°

ϕ = 137.69°

Learn more about RLC circuit:

https://brainly.com/question/372577?referrer=searchResults

[tex]19.2\:\text{m/s}[/tex]

Explanation:

At the top of the tree, the velocity of the pebble is purely horizontal so we can calculate it as

[tex]v_{y} = v_{0y} = v_0\cos 40° = (25\:\text{m/s})(0.766)[/tex]

[tex]\:\:\:\:\:= 19.2\:\text{m/s}[/tex]

The height of the tree is approximately 12.5 meters when velocity of the pebble as it passes over the top of the tree.​

Let's calculate the height of the tree step by step:

Given:

Initial velocity (v0) = 25 m/s

Launch angle (θ) = 40° above the horizontal

Time after launch (t) = 2 seconds

Acceleration due to gravity (g) = -9.8 m/s² (negative because it acts downward)

Step 1: Calculate the vertical component of the initial velocity (Vy):

Vy = v0 * sin(θ)

Vy = 25 m/s * sin(40°)

Vy ≈ 25 m/s * 0.6428 ≈ 16.07 m/s (rounded off to two decimal places)

Step 2: Calculate the vertical displacement (change in height) of the pebble after 2 seconds:

d = vot + (1/2)at²

d = (16.07 m/s) * (2 s) + (1/2) * (-9.8 m/s²) * (2 s)²

d ≈ 32.14 m - 19.6 m

d ≈ 12.54 m (rounded off to two decimal places)

Step 3: The height of the tree is equal to the vertical displacement of the pebble:

Height of the tree ≈ 12.54 m ≈ 12.5 m (rounded off to one decimal place)

The height of the tree is approximately 12.5 meters.

To know more about Acceleration here

https://brainly.com/question/460763

#SPJ2

Answer:

R₁ = 14.7 10³ Ω , R₂ = 8.18 10³ Ω ,  R₃ = 1.72 10³ Ω ,  R₄ = 5.4 10³ Ω    1/8 W resistor

Explanation:

For this exercise we must use a series circuit since the sum of the voltage on each resin is equal to the source voltage (V = 30 V)

Therefore we build a circuit with 4 resistors in series, in such a way that

   V = i R

let the voltage

1st resistance

         V = i R

         R₁ = V / i

         R₁ = 14.7 / 1 10⁻³

         R₁ = 14.7 10³ Ω

power is

        P = V i

        P = 14.7 1 10⁻³

        P = 14.7 10⁻³ W = 0.0147 W

a resistance of ⅛ W is indicated

2nd resistance

          R₂ = 8.18 / 1 10⁻³

          R₂ = 8.18 10³ Ω

Power

          P = 8.18 1 10⁻³

          P = 0.00818W

a 1/8 W resistor

3rd resistance

this resistance is calculated in such a way that

          V₁ + V₂ + V₃ = 24.6

          V₃ = 24.6 - V₁ -V₂

          V₃ = 24.6 - 14.7 - 8.18

          V₃ = 1.72 V

          R₃ = 1.72 / 1 10⁻³

          R₃ = 1.72 10³ Ω

power

          P = Vi

          P = 1.72 10⁻³

          P = 0.00172 W

a resistance of ⅛ W

To obtain the voltage of 24.6 we use this three resistors together

4th resistance

The value of this resistance is calculated so that the sum of all the voltages reaches the source voltage

           30 = V₁ + V₂ + V₃ + V₄

           V₄ = 30 - V₁ -V₂ -V₃

           V₄ = 30 -14.7 - 8.18 - 1.72

           V₄ = 5.4 V

          R₄ = 5.4 / 1 10⁻³

          R₄ = 5.4 10³ Ω

Power

         P = V i

         P = 5.4 10⁻³

         P = 0.0054 W

⅛ W resistance

The values ​​of these resistance are commercially

Let's check the consumption of the circuit

  R_total = R₁ + R₂ + R₃ + R₄

  R_total = (14.7 + 8.18 + 1.72 + 5.4) 10³

   R_total = 30 10³

the current circulating in the circuit is

     i = V / R_total

     i = 30/30 10³

     i = 1 10⁻³ A

therefore it is within the order requirement.

for connections see attached diagram

Answer:

where is the attachment

Explanation:

Answer:

variable

Explanation:

Answer:

South and West

Explanation:

Those people are pushing the hardest. It will move south faster than it moves west.

Answer:

The amplitude [tex]A(5) = 1 \ m[/tex]

Explanation:

From the question we are told that

     The  spring constant is  [tex]k = 100 \ N/m[/tex]

      The  damping constant is  [tex]b = 8.0 *10^{-3} \ kg \cdot m/s[/tex]

       The mass is  [tex]m = 0.050 \ kg[/tex]

       The  maximum displacement is [tex]A_o = 1.5 \ m \ at t = 0[/tex]

       The  time  considered is  t =  5.0 s

Generally the displacement(Amplitude) of damped harmonic motion is mathematically represented as

           [tex]A(t) = A_o * e ^{ - \frac{b * t}{2 * m} }[/tex]

substituting values

         [tex]A(5) = 1.5 * e ^{ - \frac{ 8.0 *10^{-3} * 5}{2 * 0.050} }[/tex]

         [tex]A(5) = 1 \ m[/tex]

Answer:

As in explanation.

Explanation:

A) Centre of Curvature: This is defined as the point in the center of the sphere from which the mirror was sliced. It is represented by the letter "C"

B) Vertex: It is defined as the point on the mirror's surface where the principal axis meets the mirror. It is represented by the letter A.

C) Focal Point: This is defined as the Midway point between the vertex and the center of curvature. It is represented by the letter "F"

D) Radius of Curvature: This is defined as the distance from the vertex to the center of curvature. It is represented by the letter "R"

E) Focal Length: This is defined as the distance from the mirror to the focal point. It's represented by the letter "f"

Answer:

v/c = 0.76

Explanation:

Formula for Length contraction is given by;

L = L_o(√(1 - (v²/c²))

Where;

L is the length of the object at a moving speed v

L_o is the length of the object at rest

v is the speed of the object

c is speed of light

Now, we are given; L = 65%L_o = 0.65L_o, since L_o is the length at rest.

Thus;

0.65L_o = L_o[√(1 - (v²/c²))]

Dividing both sides by L_o gives;

0.65 = √(1 - (v²/c²))

Squaring both sides, we have;

0.65² = (1 - (v²/c²))

v²/c² = 1 - 0.65²

v²/c² = 0.5775

Taking square root of both sides gives;

v/c = 0.76