With the aid of a suitable diagram, explain what is meant by an electromagnetic wave.

Answ

In real world application Ultraviolet is not a color as it it can’t be seen by the human eye. It is a high frequency part of the Suns electromagnetic radiation. Even though UltraViolet sounds like a color, the Ultra in this case signifies that it is beyond Violet and thus beyond the visible part of the electromagnetic spectrum. They are not depicted with a color on spectrum charts, since we can’t see it we can’t truly classify it as a color no more than can we equate the other parts of the spectrum like XRays, Gamma Rays and Radio Waves with colors. These and other non-visible parts of the spectrum are measured instead with wavelengths. So the answer is no they would not be monochromatic, or any color at all.

Red, Orange, Yellow, Green, Blue, Indigo and Violet are the visible colors of the electromagnetic spectrum. They, combined together are called white light and our atmosphere acts like a prism to divide them into separate and apparently distinct colors. Outside the visible Red you have Infrared which is invisible to the human eye and is the heat we feel from the sun. Outside the Violet end of the visible spectrum is where UVA, UVB and UVC are found, and these are the eye and skin damaging rays. UV rays are also invisible to the human eye (but visible to certain birds of prey such as raptors

Explanation:

Answer:

When an object falls freely to the ground, its acceleration is uniform. Hint: When an object falls freely on the ground, the force of the gravity works on it. So the acceleration on the object is the acceleration due to gravity. So the acceleration is uniform on the freely falling body.

Answer: A) 10

Explanation:

I plugged in the numbers into a calculator.

Ex:

The formula for density is d=m/v so I divided 15 by 1.5 and it gave me 10.

Answer:1m

Explanation:

2n=0.4m

5n=?

5n×0.4/2n=1m

Answer:

REENA IS STRONGER

Explanation:

so let's just find how long each person takes to carry the load half way, to proof who is stronger.

Rahul takes 5 minutes

5/2

= 2.5

so Rahul takes 2.5 minutes to travel 100 metres with 80 kg

where as

Reena take 4 minutes

4/2

= 2

so Reena takes 2 minutes to travel 100 metres with 80 kg

__________________________________________________

Therefore Reena is stronger because, she went 30 seconds before Rahul

Answer:

hope it helps you

Explanation:

fonot judge through bad handwriting :(

Answer: √(L/g)

Explanation:

Here we only work with the units:

The unit of the period is units of time, so we have:

[T] = [s]

Now, the units of the length of the pendulum are units of distance:

[L] = [m]

And the units of the acceleration are:

[g] = [m/s^2]

Now, we want to work with those two in such way that the end result is only in seconds.

First, we can see that in g we have seconds square, so we know that we should use a square root.

Then we can divide L by g in order to remove the distance unit, and to have the time unit in the numerator

[L/g] = [m*s^2/m] = [s^2]

Now we apply the square root:

[√(L/g)] = [√s^2] = [s]

Then the combination is: √(L/g)

T = k*√(L/g)

where k is the constant of proportionality.

Answer:

C)-16 N

Explanation:

concepts used

force = mass* acceleration

equation of motion

[tex]v^2 = u^2 + 2as[/tex]

where v is the final velocity

u is the initial velocity

and s is the distance moved

______________________________________________

Given

mass = 1 kg

initial velocity (u) = 40m/s

final velocity (v) = 0 as stones comes to rest

distance moved by stone (s) = 50m

using  [tex]v^2 = u^2 + 2as[/tex]

[tex]0 = 40^2 +2a*50\\=> -1600 = 100a\\=> a = -1600/100 = -16[/tex]

Thus, acceleration is -16 m/s^2

here acceleration is negative as force of friction is opposing the motion.

Force of friction = mass of stone * acceleration of stone

Force of friction = 1*-16 kgm/s^2 = -16N       ( kgm/s^2 = 1 N)

Thus, option c -16N is correct choice.

Answer:

12.3 m/s

Explanation:

The Doppler equation describes how sound frequency depends on relative velocities:

fr = fs (c + vr)/(c + vs),

where fr is the frequency heard by the receiver,

fs is the frequency emitted at the source,

c is the speed of sound,

vr is the velocity of the receiver,

and vs is the velocity of the source.

Note: vr is positive if the receiver is moving towards the source, negative if away.

Conversely, vs is positive if the receiver is moving away from the source, and negative if towards.

Given:

fs = 894 Hz

fr = 926 Hz

c = 343 m/s

vs = 0 m/s

Find: vr

926 = 894 (343 + vr) / (343 + 0)

vr = 12.3

The speed of the car is 12.3 m/s.

Answer:

a. 960 W b. One 1 kW room heater

Explanation:

a. The rate of heat conduction P = kA(T₂ - T₁)/d where k = 2 × 0.040 W/m-K =  0.080 W/m-K since the thermal conductivity of glass wool is 0.040 W/m-K and that of the material is twice the thermal conductivity of glass wool, A = area of walls = 120 m², T₁ = outside surface temperature = 5.0 °C, T₂ = inside surface temperature = 18.0 °C and d = thickness of wall = 13.0 cm = 0.13 m

P = kA(T₂ - T₁)/d

= 0.080 W/m-K × 120 m²(18.0 °C - 5.0 °C)/0.13 m

= 9.6 Wm/K × 13 K/0.13 m

= 124.8 Wm/0.13 m

= 960 W

b. The number of 1 kW room heater required will be

n = rate of heat conduction/power of one room heater = 960 W/ 1 kW = 960 W/1000 W = 0.96 ≅ 1

So we need only one 1 kW room heater.

Answer:

His conclusion best illustrates a pessimistic outlook.

Explanation:

As seen in the question above, Ken got 20% of his final grade in the first test he did for this class, that is, there will be other tests that can provide him to reach the grade needed to pass the class. However, even if there are possibilities, he believes that he will not pass the class, he does not have a positive and optimistic view of his future in this class and is sure that he will fail. This negative view of the future is an example of a pessimistic outlook.

Answer:

2ms-¹ means that the body under consideration moves 2m in a second, and may be it will continue to move 2m in every 1 second, if there's no external unbalanced force acting on that body (those forces do include frictional forces). mark its brainlist plz. Kaneppeleqw and 6 more users found this answer helpful. Thanks 3.

Answer:

that the student has travels 2 meters every 1 second that passes

The amount of force required to move the object is 64,800N

The first step is to write out the parameters given in the question;

Mass= 1200 kg

Velocity= 54 km/hr

The amount of force required to move the object can be calculated as follows;

Force= mass × velocity

= 1200×54

= 64,800N

Hence the amount of force that is required to move the object is 64,800N

Please click on the link below to learn more

https://brainly.com/question/24256124?referrer=searchResults

Ploughing field with harrow pulled by a tractor being a modern technology​ is true.

This involves the use of scientific knowledge to tackle different life problems and has different sectors.

Ploughing field with harrow pulled by a tractor involves machines and not manual labour which makes it a modern technology.

Read more about Technology here https://brainly.com/question/7788080

#SPJ1

The answer to the digits rounded to one significant figure is 100.

Significant figures are the most important figures in a number of digits.

The closer a digit is to the beginning of a number, the more important  or significant  it is.

But, the rule for rounding up a set of numbers to the first significant or to one significant figure is that:

From the numbers 98.907, 9 is the most significant digit followed by 8.

8 is greater than 5 so we should round up by adding one to 9 making the number 100.

learn more here:

https://brainly.com/question/11566364

Answer:

3.24×10⁸ J, or 324 MJ

Explanation:

"kWh" is a kilowatt-hour.  It's the energy used by 1 kilowatt of power after one hour.

A kilowatt is a kilojoule per second.

90 kWh

= 90 kW × 1 hr

= 90 kJ/s × 1 hr

= 90 kJ/s × 3600 s

= 324,000 kJ

= 324,000,000 J

The energy is 3.24×10⁸ J, or 324 megajoules.

Explanation:

Wave front, imaginary surface representing corresponding points of a wave that vibrate in unison. ... Wave fronts for longitudinal and transverse waves may be surfaces of any configuration depending on the source, the medium, and the obstructions encountered.

Answer:

1 Watt

Explanation:

Power (P) = w / Δt

w = work done

Δt = change in time

Power (P) = 60kg / 60 seconds

Power (P) = 1 Watt

Answer:

hey mate

answer is probably voltage as per me

as

Explanation:

Voltage, electric potential difference, electric pressure or electric tension is the difference in electric potential between two points, which is defined as the work needed per unit of charge to move a test charge between the two points

Answer:

In what way is iron unique among the elements?

It has the lowest mass per nuclear particle.

Match words at the left to the correct blanks in the sentences on the right. Not all words will be used.

-The energy that drives the expansion of a star into a subgiant or red giant comes from HYDROGEN SHELL FUSION

-Stars with mass greater than about 8 solar masses are considered HIGH-MASS STARS

-The final stage of core fusion in a low-mass star is HELIUM FUSION

-Stars that are fusing hydrogen in their cores are MAIN-SEQUENCE STARS

-When it dies, a high-mass star explodes as a SUPERNOVA

-A star that is expanding (into a subgiant and then a giant) has a(n) INERT HELIUM CORE

-When it dies, a low-mass star expels a PLANETARY NEBULA

-Stars with masses less than about two solar masses are considered LOW-MASS STARS

Answer:

Well if they playing a game like that

Answer:

kinetic energy will be equal to 0

Explanation:

this is because at final position velocity of body will become zero.

kinetic energy eill be 8 times

Answer:

The ocean tides on earth are caused by both the moon's gravity and the sun's gravity. ... Even though the sun is much more massive and therefore has stronger overall gravity than the moon, the moon is closer to the earth so that its gravitational gradient is stronger than that of the sun.

The moon plays a larger role than the sun in causing tides in the oceans because it is much closer to Earth and has a stronger gravitational pull on our planet. The gravitational force between two objects is directly proportional to their masses and inversely proportional to the square of the distance between them.

Although the sun is much larger than the moon, its gravitational pull on Earth is much weaker because it is much farther away. The moon, on the other hand, is much smaller than the sun, but it is much closer to Earth and exerts a stronger gravitational force on our planet. This gravitational force causes the water in the oceans to bulge towards the moon, causing high tides.

In addition to the gravitational force, the shape of the ocean basins, the rotation of the Earth, and the positions of the sun and moon also play a role in causing tides. However, the moon's gravitational force is the primary factor that causes tides in the oceans.

Answer:

80 cm.

Explanation:

Since the metre rule is 1 m i.e 100 cm it means that the mass of the metre can be obtained at the 50 cm mark.

But the metre is pivoted at the 60 cm.

Please refer to the attached photo for details.

In the attached photo, y is the distance between the mark (that will balance the metre rule when a 50 g mass is hunged) and the pivot.

Thus, we can obtain the value of y as follow:

Anticlock wise moment = Clock wise moment

Anticlock wise moment = 100 × 10

Clock wise moment = y × 50

Anticlock wise moment = Clock wise moment

100 × 10 = y × 50

Divide both side by 50

y = (100 × 10) /50

y = 20 cm

Now, to obtain the mark, B that will balance the metre, we simply add 20 cm to 60 cm ie

B = 60 + 20

B = 80 cm

Answer:

friction

the rubbing of the surfaces create friction, giving off heat

Answer:

heat is produced by rubbing our hands  together which cause friction and during the process you can feel heat.

Answer:

the ratio of a distance through which any part of a machine moves to that which the driving part moves during the same time.pls pls mark me branilest

Answer:

Physics is the branch of science concerned with the nature and properties of matter and energy. The subject matter of physics, distinguished from that of chemistry and biology, includes mechanics, heat, light and other radiation, sound, electricity, magnetism, and the structure of atoms. And a more detailed working definition of physics may be: The science of nature, or that which pertains to natural objects, which deals with the laws and properties of matter and the forces which act upon them. Quite often, physics concentrates upon the forces having an impact upon matter, that is, gravitation, heat, light, magnetism, electricity, and others.

Physics helps us to understand how the world around us works, from can openers, light bulbs and cell phones to muscles, lungs and brains; from paints, piccolos and pirouettes to cameras, cars and cathedrals; from earthquakes, tsunamis and hurricanes to quarks, DNA and black holes. Physics helps us to organize the universe. It deals with fundamentals, and helps us to see the connections between seemly disparate phenomena.

Physics provides quantitative and analytic skills needed for analyzing data and solving problems in the sciences, engineering and medicine, as well as in economics, finance, management, law and public policy. Physics is the basis for most modern technology, and for the tools and instruments used in scientific, engineering and medical research and development. Manufacturing is dominated by physics-based technology.

To understand the fundamental principles of the universe, physics utilizes many workings from the other natural sciences. Because of this overlap, phenomena studied in physics (conservation of energy for example) are common to all material systems. The specific ways in which they apply to energy (hence, physics) are often referred to as the "laws of physics." Because each of the other natural sciences biology, chemistry, geology, material science, medicine, engineering, and others, work with systems which adhere to the laws of physics, physics is often referred to as the "fundamental science."

Answer:

Physics can be important in understanding the world and how it works. The  main goal of physics is to understand how the universe behaves.

Explanation:

Answer:

17.15 m

Explanation:

Assuming the well is empty (full of air instead of water), the speed of sound is v = 343 m/s.

The water well acts as a pipe closed at one end.  Therefore, the depth of the water well must be an odd multiple of a quarter of the resonant wavelength.

L = (2n − 1) λ/4, n = 1, 2, 3, etc.

v = λf, so λ = v/f.  Substituting:

L = (2n − 1) v/(4f)

Solving for frequency:

f = (2n − 1) v/(4L)

The difference between two successive resonant frequencies is therefore:

Δf = (2(n+1) − 1) v/(4L) − (2n − 1) v/(4L)

Δf = (2n + 1) v/(4L) − (2n − 1) v/(4L)

Δf = 2 v/(4L)

Δf = v/(2L)

Plugging in values:

50 Hz − 40 Hz = 343 m/s / (2L)

2L = 34.3 m

L = 17.15 m

tape measure?

Hope that helped!!! k

instrument is used to measure is Tape measure