Help!!! Line B touches the circle at a single point. Line A extends through the center of the circle.
I. What is line b in reference to the circle?
2. How large is the angle between lines A and B?
Answer:
If I understand correctly. Line B is parallel to the circle. Also, the angle is less than 90.
The size of the circle determines. The diameter should not be fixed either.'Circle' is characterized as "a two-dimensional geometric figure comprising of the set of all those points in a plane that are at equal distance from the center."
1). Line B would be considered as the 'tangent' in association with the given circle.
2). The angle lying among the lines A and B would be of 90° i.e. right angle.
Given that,
A circle with line A drawn through its center
Line B moves while touching the edge of the circle and intersects line A outside the circle.
Since 'Tangent' is described as a 'straight-line touching the curve at one point without crossing it,' thus, line B would be considered as the tangent of the circle as it touches the circle's curve once. The angle that is formed at the intersection of the line A and B at the curve of the circle would be a right angle because they are perpendicular to one another. Thus, the perpendicular lines A and B form an angle of 90°.Learn more about 'circle' here:
brainly.com/question/11833983
9. Which of the following is NOT a recommendation to help you succeed in this course?
Consistently and actively work in the course on a daily basis.
Wait until the end of the semester to complete all work.
Complete all assignments in a timely manner.
Contact your instructor if you have questions.
Answer:
Wait until the end of the semester to complete all work.
Explanation:
this is the obvious answer.
please mark me brainliest
Answer:
Wait until the end of the semester to complete all work
How do we aquire knowledge in science?
Answer:
By studying.
By paying attention to what the teacher is saying.
That's the way to receive knowledge.
HAVE A GREAT DAY
Explanation:
Please give me that little crown...
AND REMEMBER TO SMILE
the speed of pendulum is slowest: a) at mountain b) at sea level
Answer:
At sea level
Explanation:
Because there is higher air pressure
How has the games changed over the years?
Answer:
The definition of the particular circumstance consists provided in the subsection on the interpretation elsewhere here.
Explanation:
Throughout the past 10-20 years, the computer games industry is experiencing some insane shifts. Several of the adjustments are responsible for the observed market developments, while others are related to just the tech boom as well as technological development across the global economy. Here is another glimpse at some instances of how and why the gaming industry has evolved in just the last few decades.Which has more mass, a 10 N object on the moon, or a 10 N object on the Earth?
Answer:
10N object on the earth
Gravity on moon is one sixth of earth
So a mass weighing 10N weighs 60N on earth .
So a 10N object on moon has more mass
Solve the following numerical problems. a) A load of 400N is lifted up by an effort of 100N. If load distance is 20cm, what will be the effort distance? (Ans: 80cm) b) Two boys, Shrijan having weight 600N and Shrijesh having weight 300N are playing see-saw. If Shrijan is sitting at 2m from fulcrum, where should Shrijesh sit from fulcrum to balance Shrijan?(Ans: 4m) c) A lever of length 1m has been used ttoko lift a load of 600N by applying an effort of 200N. If load is at 20cm from fulcrum, calculate mechanical advantage, velocity ratio and efficiency. (Ans: MA = 3, VR = 4, n=75%) d) Study the figure below and find the value of effort. (Ans: 120N) Muyn) 2.5m 600N 0.5m ? Science and Enyin
Answer:
given,
load = 400 N
effort = 100 N
load distance = 20 cm
we know that ,
E*Ed = L*Ld
=100 N* Ed = 400N * 20 cm
=100N * Ed = 8000N/cm
= Ed =( 8000N/cm ) / 100N
= Ed = 80 cm
b. soln.
given,
load = 600 N
load distance = 2 m
effort = 300 N
effort distance = ?
we know that ,
= E *Ed = L * Ld
= 300N * Ed = 600N * 2 m
= 300N * Ed = 1200N/m
=Ed =( 1200N/m ) / 300 N
= Ed = 4 m
C. soln.
given,
load = 600 N
load distance =20 cm
effort = 200 N
effort distance = ?
M.A = ?
V.R = ?
Efficiency = ?
we know that ,
= E *Ed = L *Ld
= 200N * Ed = 600 N * 20 cm
=200 N *Ed = 12000 N/cm
=Ed = ( 12000 N/cm) / 200 N
= Ed = 60 cm
Also,
M.A = load / effort
=600 N / 200 N
= 3
V.R = Ed/ Ld
= 60 cm / 20 cm
= 4
efficiency = ( M.A / V.R ) 100 %
= ( 3 / 4 ) 100%
= 75 %
d. soln.
given,
load = 600 N
load distance = 0.5 m
effort distance = 2.5 m
effort = ?
we know that ,
= E * Ed = L * Ld
= E * 2.5 m = 600 N * 0.5 m
= E * 2.5 m = 300 N / m
= E = ( 300 N / m ) / 2.5 m
= E = 120 N
A car is traveling to the right with a speed of 2.0\,\dfrac{\text m}{\text s}2.0 s m 2, point, 0, start fraction, start text, m, end text, divided by, start text, s, end text, end fraction on an icy road when the brakes are applied. The car slows down with constant acceleration for 3.0\,\text m3.0m3, point, 0, start text, m, end text until it comes to a stop. How long does it take the car to slide to a stop?
Answer:
It took the car 3 second to come to full stop
Explanation:
When the car is driving to the right at a speed of 2 m/s, and suddenly brakes giving the car a constant negative acceleration making it travel 3 meters after it stops, we can use the following kinematic equation to solve for the acceleration applied by the brakes:
[tex]v=v_0-a\,t\\0=2-a\,t\\a=\frac{2}{t}[/tex]
and we use this result in the following kinematic equation for the distance traveled to find the time it took it to stop:
[tex]x-x_0=v_0\,t-\frac{1}{2} a\,\,t^2\\3=2\,t -\frac{1}{2} (\frac{2}{t}) \,\,t^2\\3=2\,t-t\\3=t[/tex]
therefore, it took the car 3 seconds to come to a full stop.
Brandon buys a new seadoo he goes 12 km north from the beach he jumps wakes for 6 km to the east the chases a boat 10 km north what distance did he cover what was his displacement
Answer:
Distance covered 28 km
displacement is 22.8 km North-East
Explanation:
Distance shows how far apart objects or points are from each other. The distance he covered is the sum of all the distance travelled. Therefore:
Distance covered = 12 km + 6 km + 10 km = 28 km
Displacement is a vector quantity (has direction). It is the overall change in position.
The total distance traveled north = 12 km + 10 km = 22 km
The distance traveled east = 6 km
The displacement (d) is:
d² = 22² + 6² = 484 + 36
d² = 520
d = √520 = 22.8 km
Therefore the displacement is 22.8 km North-East
Distance covered 28 km
displacement is 22.8 km North-East
The calculation is as follows:
Distance covered
= 12 km + 6 km + 10 km
= 28 km
Now
The total distance traveled north = 12 km + 10 km = 22 km
And,
The distance traveled east = 6 km
So,
The displacement (d) is:
[tex]d^2 = 22^2 + 6^2\\\\ d^2 = 520\\\\d = \sqrt520[/tex]
= 22.8 km
learn more: https://brainly.com/question/10813422?referrer=searchResults
An astronaut is said to be weightlessness when he\she travels in a satellite. Does it mean that the earth does not attract him\her?
Answer:
Explanation:
The sense of weightlessness in orbiting satellite is because of the lack of any contact-forces. ... Thus, both the astronaut and the satellite have the same value of g, which is again equal to the centripetal acceleration of the satellite. These two neutralize each other, causing everything to appear weightless.
MAKE ME BRAINLIEST
Q1 b name the three tiny particles which make up atoms ? a write the charge alongside each one ?
Answer:
Protons
Neutrons
Electrons.
Protons + charge(positively charged)
Neurons no charge.
Electrons - ( negatively charged).
Explanation:
Atom is the smallest unit of a matter that constitutes chemical elements.
It is composed of three particles which are protons,neutrons and electrons.
Protons is positively charged,neuron has no charge and electrons is negatively charged.
Proton and neuron are found in the nucleus while electron is found outside the neuron.
what is the kinetic energy of a 2,000-kg car moving at 20m/s
Answer:
400k
Explanation:
Formula for KE = [tex]\frac{1}{2} mv^{2}[/tex]
Plug in:
KE = [tex]\frac{1}{2} mv^{2}[/tex]
KE = [tex]\frac{1}{2}[/tex] × 2000 × 20^2
Solve:
1000 × 400 = 400,000 or 400k
Hope this helped.
Answer : 400000J OR 4×10^4J
Kinetic energy= 1/2mv^2
Here, m=2000kg; V=20m/s
1/2×2000×20×20=400,000J
Pls help A car starts from rest and gains a velocity of 20m/s in 10 seconds calculate its acceleration and the distance covered by it in this time
Answer:
[tex] \boxed{\sf Acceleration \ (a) = 2 \ m/s^{2}} [/tex]
[tex] \boxed{\sf Distance \ covered \ (s) = 100 \ m} [/tex]
Given:
Initial velocity (u) = 0 m/s
Final velocity (v) = 20 m/s
Time taken (t) = 10 sec
To Find:
(i) Acceleration (a)
(ii) Distance covered (s)
Explanation:
[tex]\sf (i) \ From \ 1^{st} \ equation \ of \ motion:[/tex]
[tex] \sf \implies v = u + at[/tex]
[tex] \sf \implies 20 = 0 + a(10)[/tex]
[tex] \sf \implies 10a = 20[/tex]
[tex] \sf \implies \frac{10a}{10} = \frac{20}{10} [/tex]
[tex] \sf \implies a = 2 \: m/ {s}^{2} [/tex]
[tex]\sf (ii) \ From \ 2^{nd} \ equation \ of \ motion:[/tex]
[tex] \sf \implies s = ut + \frac{1}{2} a {t}^{2} [/tex]
[tex]\sf \implies s = (0)(10) + \frac{1}{2} \times 2 \times {(10)}^{2} [/tex]
[tex]\sf \implies s = \frac{1}{ \cancel{2}} \times \cancel{2} \times {(10)}^{2} [/tex]
[tex]\sf \implies s = {10}^{2} [/tex]
[tex]\sf \implies s = 100 \: m[/tex]
A 310 turn solenoid with a length of 18.0 cm and a radius of 1.60 cm carries a current of 1.90 A. A second coil of four turns is wrapped tightly around this solenoid, so it can be considered to have the same radius as the solenoid. The current in the 310 turn solenoid increases steadily to 5.00 A in 0.900 s.(a) Use Ampere's law to calculate the initial magnetic field in the middle of the 310 turn solenoid.T(b) Calculate the magnetic field of the 310 turn solenoid after 0.900 s.T(c) Calculate the area of the 4-turn coil.m2(d) Calculate the change in the magnetic flux through the 4-turn coil during the same period.Wb(e) Calculate the average induced emf in the 4-turn coil.VIs it equal to the instantaneous induced emf? Explain.(f) Why could contributions to the magnetic field by the current in the 4-turn coil be neglected in this calculation?
Answer:
Given that;
Number of turns in the solenoid N = 310
Length of the solenoid L = 18 cm = 0.18 m
Radius of the solenoid r = 1.60 cm = 0.016 m
Current in the first Circuit I₁ = 1.90A
Number of turns in second coil N₂ = 4
Final Current solenoid I₂ = 5.0 A
Time interval to change the time Δt = 0.9 s
a)
According to Ampere's law, magnetic field inside a conductor is calculated as;
B₁ = ц₀N₁I₁ / L
(ц₀ = 4π × 10⁻⁷ constant)
therefore we substitute
{(4π × 10⁻⁷) × 310 × 1.9A} / 0.18m
= 0.0041 T
b)
Magnetic field inside the solenoid after t = 0.9
B₁ = ц₀N₁I₂ / L
= {(4π × 10⁻⁷) × 310 × 5.0A} / 0.18m
= 0.0108 T
c)
Area of coil is
A = πr²
A = π × ( 0.016 )²
A = 0.000804 m²
d)
Change in magnetic influx is
dФ = (B₂ - B₁) A
= ( 0.0108 T - 0.0041 T) × 0.000804 m²
= 0.0000053868 ≈ 5.39 × 10⁻⁶
e)
Average induced emf is
e = -N₂ ( dФ / dt )
e = ( -4 ) ( 5.39 × 10⁻⁶ / 0.9)
e = - 2.39 × 10⁻⁵V ( NOTE, this is not equal to the instantaneous induced emf )
f)
The induced emf is very low, so the contributions to the magnetic field in the coil is Negative.
which method is commonly used for improving cattle breeds and why?
Answer: Cross-breeding method is commonly used for improving cattle breeds. Cross-breeding between two good varieties of cattle will produce a new improved variety. Cross breeding is defined as the process or the act of producing offspring particularly through mating two pure bred individuals but come from different breeds, varieties, or even species. Crossbreeding is undertaken to: Utilise the desired attributes of two or more breeds. Produce progeny better suited to target markets while maintaining environmental adaption. Improve productivity quicker in traits which are slow to change within a breed i.e. environmental adaption, fertility and carcass traits.
Hope it helps :)
the value of g is more in the poles of the earth,why?
Answer:
Explanation:
beacuse the poles are the cause of graIt's due to the rotation of earth about its own axis. Due to the rotation, objects placed on the surface of earth also rotates . Their rotational kinetic energy prevents them from the free fall along gravitational pull. This phenomena can also be explained sitting on the earth surface as their free fall suffers a centrifugal barrier due to the rotation. In this explanation, the term, centrifugal barrier, appears because earth is a non-inertial frame. Centrifugal force in a non intertial frame acts opposite to gravitational force.
The rotational energy / centrifugal barrier on a object depends on the radius of the circle linearly ; the circle is drawn around the axis of rotation from the point where the object placed. Now you can imagine that its radius get shorter and shorter towards the pole from the equator. Hence the barrier decreases if we move from equator to the both poles of earth. Hence garvitational force on a object i.e. its weight, so the g, becomes effectively maximum on the poles and minimum on the equator.
A negative charge feels a force when stationary in an electric field. moving parallel to an electric field. moving parallel to a magnetic field. moving perpendicular to a magnetic field. stationary in a magnetic field. moving perpendicular to an electric field.
Answer:
stationary in an electric field.
moving perpendicular to a magnetic field.
moving perpendicular to an electric field.
Explanation:
Negative charge: In physics, the term "negative charge" is defined as a phenomenon that consists of a surplus or different electrons in any field i.e magnetic or electric field.
However, the correct answer in the question above, would be:
"stationary in an electric field".
"moving perpendicular to a magnetic field".
"moving perpendicular to an electric field".
A 1000 kg car developed a snag and is standing in the middle of a road. The driver and a help pulled it with two ropes respectively with forces 200√2 N 45° east of south and 400N 30° north of east. Assuming negligible friction, find the acceleration of car
Answer:
Acceleration = 0.1464 m/s^2
Explanation:
From the question, the parameters given are:
Mass m = 1000 kg
The driver and a help pulled it with two ropes respectively with forces 200√2 N 45° east of south and 400N 30° north of east
Find the resultant force along the x axis.
(400 × cos30) - (200√2 × cos45)
346.4 - 200 = 146.4 N
therefore, the resultant force = 146.4N
The formula to use for the acceleration of the car is
F = ma
Where
F = resultant force
M = mass of the car
a = acceleration of the car
Substitute f and m into the formula
146.4 = 1000 × a
Make a the subject of formula
a = 146.4 / 1000
a = 0.1464 m/s^2
Therefore, the car accelerate at 0.1464 m/s^2
A 9V battery produces a 1.5A current in a piece of wire. What is the resistance of the wire?
8 Ω
9 Ω
6 Ω
7 Ω
Explanation:
Using Ohm's Law and a bit of substitution, we can use voltage divided by current to solve for resistance. Doing that, we'll get 6 Ohm.
An ideal gas is enclosed in a piston-cylinder apparatus with the piston being freely movable. Given that LaTeX: \DeltaΔE is positive and LaTeX: \DeltaΔH is negative following a process, ____ the system absorbs heat and expands during the process. the system absorbs heat and contracts during the process. the system loses heat and expands during the process. the system loses heat and contracts during the process. the system loses heat but neither expands nor contracts during the process.
Clear question is;
An ideal gas is enclosed in a piston-cylinder apparatus with the piston being freely movable. Given that ΔE is positive and ΔH is negative following a process,
pick one
A) the system absorbs heat and expands during the process.
B) the system absorbs heat and contracts during the process.
C) the system loses heat and expands during the process.
D) the system loses heat and contracts during the process.
E) the system loses heat but neither expands nor contracts during the process.
Answer:
Option A is correct.
Explanation:
In thermodynamics, when the change in energy which is ΔE of a system is positive, it means that the system is undergoing an endothermic process. An endothermic process is simply one where heat is absorbed from the surroundings
Now, when change in enthalpy which is ΔH is negative, it means that it's an exothermic reaction. Exothermic means it releases heat to the surroundings. This means work is positive because the system does work on the surroundings. Thus it will expand.
So the correct answer is;
heat is absorbed from the surroundings and will expand during the process.
Why do scientists not use US customary units when reporting their data?
One of the scientist's jobs is to report the results of his experiments to all the other scientists in the world.
There isn't a single real science shop anywhere in the world that uses the US customary system of units. Not one.
Even in the measly three countries that use it for measuring carpet, pumping gas, and weighing fish ... Myanmar, Liberia, an the USA ... the scientists do their work in the SI/MKS/metric system.
if a girl is running along a straight road with uniform velocity 1.5 metre per second find the acceleration
Answer:
Acceleration is 0.
Explanation:
Since the girl is running with a uniform velocity, meaning she is moving at a constant rate, she is not accelerating. Acceleration only occurs when the speed of an object increases, decreases, or if there is a change in direction.
V = ?
d= 15 m left
t = 5 s
What is the velocity?
Answer:
Velocity= 3[tex]ms^{-1}[/tex]
Explanation:
Formula to find velocity = Displacement/time taken
therefore, velocity= 15/5 ➤ Velocity = 3 [tex]ms^{-1}[/tex]
The cartesian coordinates of a point in the xy plane are x = −7.11 m, y = −4.41 m. Find the distance r from the point to the origin. Answer in units of m.
Explanation:
Use Pythagorean theorem:
r² = x² + y²
r² = (-7.11 m)² + (-4.41 m)²
r = 8.37 m
Use trig to find the angle.
tan θ = y / x
tan θ = (-4.41 m) / (-7.11 m)
θ = 31.8° or 211.8°
Since x is negative and y is negative, the point is in the third quadrant, so θ = 211.8°.
Or, if we subtract 360°, θ = -148.2°.
what is the Ramsar convention?
Bus starts from rest if the acceleration of the bus is 0.5 MS square what will be the velocity at the end of two minutes and what distance will it cover during that time
Answer:
1. 60 m/s.
2. 3600 m.
Explanation:
The following data were obtained from the question:
Initial velocity (u) = 0
Acceleration (a) = 0.5 m/s²
Time (t) = 2 mins
Final Velocity (v) =?
Distance travelled (s) =?
1. Determination of the velocity at the end of 2 minutes.
Initial velocity (u) = 0
Acceleration (a) = 0.5 m/s²
Time (t) = 2 mins = 2 x 60 = 120 secs
Final Velocity (v) =?
v = u + at
v = 0 + (0.5 x 120)
v = 60 m/s
Therefore, the velocity at the end of 2 minutes is 60 m/s.
2. Determination of the distance travelled.
Initial velocity (u) = 0
Acceleration (a) = 0.5 m/s²
Final velocity (v) = 60 m/s
Distance travelled (s) =..?
v² = u² + 2as
60² = 0 + 2 x 0.5 x s
3600 = 1 x s
s = 3600 m
Therefore, the distance travelled is 3600 m.
It takes Serina 1.72 hours to drive to school. Her route is 47 km long. What is Serina's average speed on her drive to school? Your Answer :
Explanation:
Average speed = distance / time
v_avg = 47 km / 1.72 hr
v_avg = 27.3 km/hr
numerical filing method is more scientific why give me 4 reason
Answer:
Numerical Methods are mathematical way to solve certain problems.Whether the equations are linear or nonlinear, efficient and robust numerical methods are required to solve the system of algebraic equations.
Analytical solutions are exact solutions based on mathematical principles.
However, the governing partial differential equations of fluid flow are complex and cannot be solved by analytical means. The partial differential equations are therefore converted into a system of algebraic equations that are subsequently solved through numerical methods to provide approximate solutions to the governing equations.
Although we rarely reach on exact answer , we can get really close to the exact answer much quicker than solve analytically.
Answer:
oh my god
Explanation:
how long answer is this
A rod is made up of copper and wood joined together.
After the rod is heated at the join in the centre for about a minute, where would the lowest temperature be?
my views
Explanation:
Figure (8) shows a rod made up of copper and wood joined together. The rod is heated at the joint in the centre for about a minute. At which point – A, B, C or D, would it show the lowest temperature? PLEASE GIVE REASONS ALSO(MINIMUM 2)
If the mass of a ball is 50g on a height of 8m. Calculate the kinetic energy when it has a velocity of 3m/s.
Answer:
kinetic energy is 1/2mv^2.
which is 1/2×0.05×3^2
1/2×0.05×9.
1/2×0.45=
0.45÷2=0.225~0.23J