your organization is having a third party come in and perform an audit on the financial records. you want to ensure that the auditor has access to the data they need while keeping the customers' data secure. to accomplish this goal, you plan to implement a mask that replaces the client names and account numbers with fictional data. which masking method are you implementing?

We follow the following steps, to perform a removal from a hash table that uses linear probing to resolve collisions where we do not use a special marker to represent deleted elements. that is, we must rearrange the contents so it appears that the removed entry was never inserted in the first place:

This technique keeps your table tidy at the expense of slightly slower deletions.

What is linear probing?

In computer programming, linear probing is a technique for dealing with collisions in hash tables, which are data structures for storing a variety of key-value combinations and locating the value corresponding to a particular key. When a collision happens in linear probing, we continue probing until an empty. Although linear probing is simple to compute, clustering is its biggest drawback. It takes time to look for an element or to find an empty bucket since it creates numerous consecutive items that clump together.

To learn more about linear probing, use the given link
https://brainly.com/question/17238698
#SPJ4

The minimum pixel depth, in bytes, that would be needed to store percentages as integer values is 1 byte.

Digital information is stored in units called bytes, which typically have eight bits. The byte is the lowest addressable unit of memory in various computer architectures because it was historically the amount of bits needed to encode a single character of text in a computer.

Network protocol specifications such as The Internet Protocol (RFC 791) refer to an 8-bit byte as an octet to distinguish them from the ordinary 8-bit definition. Depending on the bit endianness, an octet's bits are typically counted from 0 to 7 or 7 to 0, respectively. Since the first bit is a zero, the eighth bit is a seven.

To know more about byte click here:

https://brainly.com/question/2280218

#SPJ4

Answer:

a

Explanation:

because it has knot in the name it is so obvious based on the name

gaia.cs.umass.edu is Not a ethernet address. It is a 12-digit hexadecimal number that occupies 6 bytes.

To learn more about  Ethernet  address refer,

https://brainly.com/question/28930681

#SPJ13

gaia.cs.umass.edu is Not a ethernet address. It is a 12-digit hexadecimal number that occupies 6 bytes.

To learn more about  Ethernet  address refer,

brainly.com/question/28930681

#SPJ13

A stateful DHCPv6 server gives hosts IPv6 addresses in addition to "other information."Additionally, it monitors how each assignment is progressing.

To learn more about  ipv6 refer

https://brainly.com/question/28837313

#SPJ4

To change attributes that the editor cannot change in the HTML code on a website when using a web page editor. Thus, option A is correct.

HTML, meaning Hypertext Markup Language is a  fundamental component of both the Internet is web pages, which are created for internet browsers. It outlines the purpose and organization of internet content.

When utilizing a Web page editor to modify features that perhaps the operator is unable to modify, the HTML language on a webpage. One may study HTML by using editing software as well as use them to complete tasks.

However, so that they can improve productivity, the majority of software developers choose web page editors rather than word processors. Therefore, option A is the correct option.

Learn more about HTML, here:

https://brainly.com/question/15093505

#SPJ1

Marilee can sue for breach of contract, because Les had a preexisting duty to do all of the work.

What is hard drive ?

The physical device that houses all of your digital stuff is a hard disk. Digital stuff that is kept on a hard drive includes your papers, photos, music, videos, applications, application preferences, and operating system. There are internal and external hard drives.

What is software?

Software is a collection of instructions, data, or computer programs that are used to run machines and carry out particular activities. It is the antithesis of hardware, which refers to a computer's external components. A device's running programs, scripts, and applications are collectively referred to as "software" in this context.

What does running program means?

Double-click the executable file or the shortcut icon pointing to the executable file on Windows to start the program. If you find it difficult to double-click an icon, you can highlight it by clicking it once and then using the Enter key on the keyboard.

Learn more about hardware and software click here:

https://brainly.com/question/24231393

#SPJ4

Create a guest access WLAN that separates guest WLAN traffic from other clients on the same access point and uses open authentication.

The most frequent cause of failure is a lack of user knowledge of the policy's contents. Even the finest security policy can provide a false sense of security that puts crucial assets at risk if user education and enforcement are lacking. One of the most crucial best practices for wireless network security is using a strong password. A strong password consists of a minimum of eight characters, a mix of capital and lower-case letters, numbers, and symbols. To keep passwords secure, they should be changed frequently.

Learn more about security here-

https://brainly.com/question/5042768

#SPJ4

In order to use the functions included in the '.funcs' file in a script, you can modify either your login script or your scripts to load the '.func' function into memory. Therefore, options B and D hold the correct answers.

In the context of computer programming, a script is a  sequence of instructions or a program that executes without being complied.

Based on the case where you save a set of sorted functions in the '.funcs' file for using them in the future. Whenever you need to have access to these saved functions to write them in scripts:

"

The complete question is as follows:

you have written a set of functions that are stored in the .funcs file. how can you use the functions in this file in scripts that you write? (choose all that apply.)

A. By calling this file .funcs, the functions in the file are automatically available whenever you log in.

B. Modify your login script, so the login script loads the .funcs functions into memory.

C. Use the call scripts .func command in your scripts.

D. Modify your scripts so that they load .funcs into memory.

"

You can learn more about Scripts at

https://brainly.com/question/26121358

#SPJ4

Python's built-in input() function is known for always returning an object of the str(string) class.  

To Learn more About  built-in input() function Refer to:

https://brainly.com/question/28875510

#SPJ4

In a router buffer, the packet experiences a queuing delay while it waits to be transmitted onto the link.

= (N*(N-1)L)/(2*R*N)

=(N-1)L/2R.

To Learn more About queuing delay Refer to:

https://brainly.com/question/14498367

#SPJ4

Since all network configuration settings have been verified but since the application is new, a good first step in troubleshooting the problem is option C. Uninstall and reinstall the application.

Finding and fixing problems with complicated machines, electronics, computers, and software systems frequently involves troubleshooting, a methodical approach to problem-solving.

Note that Finding the root of a computer system error and fixing the corresponding hardware and software problems are done systematically through troubleshooting. The key to a successful resolution of a problem is to approach it logically and methodically.

Therefore, A program's associated files are deleted from the hard drive of a computer during an uninstall. The delete function only removes a portion of a program or a selected file, as opposed to the uninstall feature, which safely and effectively deletes all associated files.

Learn more about  troubleshooting from

https://brainly.com/question/26417401
#SPJ1

See full question below

A: You are testing a new client server application and the application doesn't appear to be communicating successfully between the client and server. All network configuration settings have been verified but since the application is new, you are unsure of all the protocols that are used. What is a good first step in troubleshooting the problem?

a. configure the firewall to use a different profile

b. disable the firewall

c. uninstall and reinstall the application

d. reset the switch and router

The dynamic routing protocol that was developed as an exterior gateway protocol to interconnect different internet providers is BGP.

The external gateway protocol is known as BGP. It was created to exchange routing data between various networks, or autonomous systems (ASes).

In contrast to static routing, which requires administrators to configure events for any changes, dynamic routing relies on routers that automatically learn the routing information and add the route to their routing database. When a router employs a dynamic routing protocol, it can identify a backup route in case the primary one fails and saves the best route to its routing database.

An Internet service provider is a business that offers both individuals and businesses Internet access and services (ISP).

To know more about dynamic routing click here:

https://brainly.com/question/14285971

#SPJ4

FIFO

// C++ implementation of FIFO page replacement

// in Operating Systems.

#include<bits/stdc++.h>

using namespace std;

// Function to find page faults using FIFO

int pageFaults(int pages[], int n, int capacity)

{

   // To represent set of current pages. We use

   // an unordered_set so that we quickly check

   // if a page is present in set or not

   unordered_set<int> s;

   // To store the pages in FIFO manner

   queue<int> indexes;

   // Start from initial page

   int page_faults = 0;

   for (int i=0; i<n; i++)

   {

       // Check if the set can hold more pages

       if (s.size() < capacity)

       {

           // Insert it into set if not present

           // already which represents page fault

           if (s.find(pages[i])==s.end())

           {

               // Insert the current page into the set

               s.insert(pages[i]);

               // increment page fault

               page_faults++;

               // Push the current page into the queue

               indexes.push(pages[i]);

           }

       }

       // If the set is full then need to perform FIFO

       // i.e. remove the first page of the queue from

       // set and queue both and insert the current page

       else

       {

           // Check if current page is not already

           // present in the set

           if (s.find(pages[i]) == s.end())

           {

               // Store the first page in the

               // queue to be used to find and

               // erase the page from the set

               int val = indexes.front();

               // Pop the first page from the queue

               indexes.pop();

               // Remove the indexes page from the set

               s.erase(val);

               // insert the current page in the set

               s.insert(pages[i]);

               // push the current page into

               // the queue

               indexes.push(pages[i]);

               // Increment page faults

               page_faults++;

           }

       }

   }

   return page_faults;

}

// Driver code

int main()

{

   int pages[] = {7, 0, 1, 2, 0, 3, 0, 4,

               2, 3, 0, 3, 2};

   int n = sizeof(pages)/sizeof(pages[0]);

   int capacity = 4;

   cout << pageFaults(pages, n, capacity);

   return 0;

}

LRU

//C++ implementation of above algorithm

#include<bits/stdc++.h>

using namespace std;

// Function to find page faults using indexes

int pageFaults(int pages[], int n, int capacity)

{

   // To represent set of current pages. We use

   // an unordered_set so that we quickly check

   // if a page is present in set or not

   unordered_set<int> s;

   // To store least recently used indexes

   // of pages.

   unordered_map<int, int> indexes;

   // Start from initial page

   int page_faults = 0;

   for (int i=0; i<n; i++)

   {

       // Check if the set can hold more pages

       if (s.size() < capacity)

       {

           // Insert it into set if not present

           // already which represents page fault

           if (s.find(pages[i])==s.end())

           {

               s.insert(pages[i]);

               // increment page fault

               page_faults++;

           }

           // Store the recently used index of

           // each page

           indexes[pages[i]] = i;

       }

       // If the set is full then need to perform lru

       // i.e. remove the least recently used page

       // and insert the current page

       else

       {

           // Check if current page is not already

           // present in the set

           if (s.find(pages[i]) == s.end())

           {

               // Find the least recently used pages

               // that is present in the set

               int lru = INT_MAX, val;

               for (auto it=s.begin(); it!=s.end(); it++)

               {

                   if (indexes[*it] < lru)

                   {

                       lru = indexes[*it];

                       val = *it;

                   }

               }

               // Remove the indexes page

               s.erase(val);

               // insert the current page

               s.insert(pages[i]);

               // Increment page faults

               page_faults++;

           }

           // Update the current page index

           indexes[pages[i]] = i;

       }

   }

   return page_faults;

}

// Driver code

int main()

{

   int pages[] = {7, 0, 1, 2, 0, 3, 0, 4, 2, 3, 0, 3, 2};

   int n = sizeof(pages)/sizeof(pages[0]);

   int capacity = 4;

   cout << pageFaults(pages, n, capacity);

   return 0;

}

You can learn more about this at:

https://brainly.com/question/13013958#SPJ4

The program that prints the smallest each time a number is inputted is as follows:

myList = []

for i in range(6):

   num = int(input("Enter a number: "))

   myList.append(num)

   myList.sort()

   print(f"Smallest : {myList[0]}")

From the question, we have the following parameters:

Number of inputs = 6

Requirement = Print the smallest of the numbers entered so far

This means that we make use of iteration for a range of 6

Also, we need to make use of a list

So, the program in Python is as follows:

# initialize a list

myList = []

# Iterate to get 6 inputs and perform the required operations

for i in range(6):

   # Get each input

   num = int(input("Enter a number: "))

   # Append input to a list

   myList.append(num)

   # Sort the list

   myList.sort()

   # Print the smallest

   print(f"Smallest : {myList[0]}")

Note that comments are used to explain each line

Read more about programs at

https://brainly.com/question/26497128

#SPJ1

A standardized programming language called Structured Query Language (SQL) is used to administer relational databases and carry out various operations on the data they contain.

Python is arguably the most well-known general-purpose language, and it has hooks everywhere. from database administration and integration to online tools and systems management. A sort of software application called antimalware was developed to safeguard computers and information technology (IT) systems from malware. Computer systems are scanned by antimalware tools to prevent, identify, and remove malware. A Trojan cloaks itself as desired software or code. The Trojan can take control of victims' systems for harmful reasons after being downloaded by unwary users.

Learn more about antimalware here-

https://brainly.com/question/28025826

#SPJ4

In order to uncover hidden patterns that can be utilized to forecast future trends and behaviors, data mining is used to examine enormous volumes of data. Let's say you excel at math and statistics.

If you want to become a data scientist, you will need to expand your skill set to include programming. Analyzing a vast amount of data to find patterns and trends is known as data mining. Large data sets are sorted through in data mining in order to find patterns and relationships that can be used in data analysis to help solve business problems. Enterprises can forecast future trends and make more informed business decisions thanks to data mining techniques and tools. Large amounts of data from various sources are centralized and consolidated in a data warehouse.

Learn more about programming here-

https://brainly.com/question/11023419

#SPJ4

A J Frame background color change must be performed on the event dispatch thread  it is true.

Generally, to change the backdrop color of a J Frame, simply call the J Frame set Background method using the following syntax: j frame. place Background (Color. RED)

Java's Abstract Window Toolkit (AWT) graphical user interface event queue is processed by the event dispatching thread (EDT), a background thread.

A new JFrame is created when the programme first launches. A thread is established and started as soon as the user clicks the start button.

A top-level container called J Frame offers a window on the screen. In reality, a frame serves as the foundational window onto which other elements such as the menu bar, panels, labels, text fields, buttons, etc. The J Frame window opens when almost any other Swing application first launches.

To learn more about J frame refer to:

https://brainly.com/question/20216710

#SPJ4

Containers access an operating system is option B:containers use a shared base operating system stored in a shared runtime layer.

The host OS is shared by all containers, so they are not required to boot an OS or load libraries. This makes containers much lighter and more efficient. Applications that are containerized can start quickly, and compared to VM scenarios, many more instances of the application can be installed on the machine.

Note that without the traditional need for virtual machines, containers can share access to an OS kernel. Partitioning from the 1960s and chroot process isolation from Unix in the 1970s are the foundations of container technology.

Hence, Operating system virtualization is a technique used with containers. From a small software process or microservice to a more complex application, anything can be run inside of a single container.

Learn more about operating system from

https://brainly.com/question/22811693
#SPJ1

Bitcoin is a decentralized digital money that may be purchased, sold, and exchanged whereas gigawatt hour is a measure of energy that equals one million kilowatt hours.

Bitcoin's creator, Satoshi Nakamoto, originally described the need for “an electronic payment system based on cryptographic proof instead of trust.” Digital currency known as Bitcoin is completely decentralized and not subject to bank or governmental regulation. Instead, cryptography and peer-to-peer software are employed. A public ledger, a copy of which is stored on servers throughout the world, records every bitcoin transaction.

1 Kilowatt hour [kWh] = 0.000 001 Gigawatt hour [GWh]

1,449 kilowatt hours (kWh) of energy to mine a single bitcoin.

0.001449 GWh

To know more about Cryptography visit:

https://brainly.com/question/88001

#SPJ1

Answer:

def max(x,y,z):

if (x>z and x>y):

return (x)

elif (y>x and y>z):

return y

else:

return z

Explanation:

Using the knowledge in computational language in python it is possible to write a code that  write the definition of a function named max that has three integer parameters and returns the largest of the three parameters.

def max(x,y,z):

if (x>z and x>y):

return (x)

elif (y>x and y>z):

return y

else:

return z

See more about python at brainly.com/question/12975450

#SPJ1

FOR LOOPS and WHILE LOOPS are two popular types of loops. While a While loop runs a fixed number of times, a For loop runs a variable number of times.

For Loop: A for loop is an iteration technique that works best when the number of iterations is known in advance. The initialization, expression, and increment statements always come after it. A test-at-the-bottom loop is another name for a guarded loop. A test-at-the-bottom loop is another name for an unprotected loop. The loop actions are always run at least once in an unguarded loop. A do while loop delays evaluating the condition until the end of the loop. As a result, a do while loop always runs at least once.

Learn more about loop here-

https://brainly.com/question/14390367

#SPJ4

According to the system. Disabling interrupts is preferable in some real-time processes, but the interval during which they are deactivated MUST be brief enough to prevent problems.

It would respond in 50 microseconds, whereas using an interrupt would take more over 100. I used it once to handle a somewhat messy device (saving and restoring registers and such). Consequently, a loop without interruptions and with a countdown timer. The device was tagged as "offline" and interruptions were enabled again if the countdown limit was reached. Interrupts were re-enabled if the device responded. Thus, interrupt blocking was quicker and took a manageable amount of time so that other devices weren't starved.

Learn more about devices here-

https://brainly.com/question/11599959

#SPJ4

Attach the Signature option should he choose from the ribbon. Thus, option D is correct.

An email has taken the place of all other ways of communication because it allows us to email quick attachments like images and even films, and we're able to do it from where ever using any tool we happen to possess at the time.

Before the signer's title comes one of several symbols used to identify a digital form of a signature that can be represented.  This digital form weill help to evaluate who has to send the email to the colleague.

Therefore, option D is the correct option.

Learn more about email, here:

https://brainly.com/question/28087672

#SPJ1

A pool of routable IP addresses which is smaller than the number of computers can be shared by several computers thanks to dynamic NAT.

To learn more about dynamic NAT refer to :

https://brainly.com/question/14281371

#SPJ4

Since the CUMIPMT function has the syntax CUMIPMT, the type that you can enter for the Type argument is option B and D:

The following arguments are used with the CUMIPMT function:

Rate is the amount of interest charged every period (necessary argument). The total number of payment periods for which the loan or investment must be repaid, Nper (necessary argument).

Pv (mandatory argument) - The Present Value of the loan or investment is represented by this. Start period is the initial period's number that must be used to calculate interest (mandatory argument). It must be an integer with a value between 1 and the given NPER.

Lastly, End period is the final time frame for interest calculations (mandatory parameter). It has to be an integer with a value between 1 and the given NPER. Type is a necessary argument that can either be 0 or 1. It is an integer that indicates if the interest is paid.

Learn more about Function from

https://brainly.com/question/12336270
#SPJ1

See full question below

The CUMIPMT function has the syntax CUMIPMT(Rate, Nper, Pv, Start, End, Type). What do you enter for the Type argument? a. Enter the starting and ending payment periods. b. Enter 0 if payments are made at the end of the period, or enter 1 if payments are made at the start. c. Enter the number of payment periods. d. Enter the interest rate of the loan or investment.

Wildcard character is a symbol that can be used as a general substitute for other characters or commands.

To learn more about wildcard character refer to:

https://brainly.com/question/28269734

#SPJ4

When you have a DVD-ROM disc with no label, and you want to know if it has any important files on it and after you insert the DVD-ROM into your optical media drive, then you double-click the drive letter for the optical drive to see the contents of the disc and if he DVD-ROM is not a valid disc, it will display the error message "no media".

What is an error message?

When an unexpected issue arises, information is shown in the form of an error message, typically on a computer or other device. Error message is frequently shown using dialog boxes on contemporary operating systems with graphical user interfaces. An error message is, to put it simply, a message that is delivered to the user by an operating system or program whenever an unexpected circumstance occurs. Error message is necessary to pass crucial cautions or when user intervention is required.

To learn more about error messages, use the link given
https://brainly.com/question/28501392
#SPJ4

A relational database management system is the name of the program used to store, administer, query, and retrieve data from a relational database (RDBMS).

The RDBMS offers administrative services for controlling data storage, access, and performance as well as an interface between users, applications, and the database. Relevance: The information must be appropriate for the intended usage. Completeness: There shouldn't be any missing numbers or records in the data. Timeliness: The information must be current. Consistency: The information should be cross-referenceable and have the expected data structure. A database is a logically organized collection of records or files.

Learn more about database here-

https://brainly.com/question/6447559

#SPJ4

Invading software known as malware is created specifically to harm and incapacitate computers and computer systems. The term "malicious software" often shortened to "malware."

To Learn more About malicious software Refer to:

https://brainly.com/question/399317

#SPJ4