Answer:
a. Rate = k×[A]
b. k = 0.213s⁻¹
Explanation:
a. When you are studying the kinetics of a reaction such as:
A + B → Products.
General rate law must be like:
Rate = k×[A]ᵃ[B]ᵇ
You must make experiments change initial concentrations of A and B trying to find k, a and b parameters.
If you see experiments 1 and 3, concentration of A is doubled and the Rate of the reaction is doubled to. That means a = 1
Rate = k×[A]¹[B]ᵇ
In experiment 1 and to the concentration of B change from 1.50M to 2.50M but rate maintains the same. That is only possible if b = 0. (The kinetics of the reaction is indepent to [B]
Rate = k×[A][B]⁰
Rate = k×[A]b. Replacing with values of experiment 1 (You can do the same with experiment 3 obtaining the same) k is:
Rate = k×[A]
0.320M/s = k×[1.50M]
k = 0.213s⁻¹How many atoms of oxygen are in one molecule of water (H2O)? one two four three
Answer:
there is one atom of oxygen and two atoms of hydrogen
Explanation:
Which of the following buffer systems would be the best choice to create a buffer with pH 9.10?
a) HF/KF (pKa = 3.14)
HNO2/KNO2 (pKa = 3.39)
NH3/NH4Cl (pKa = 9.25)
HClO/KClO (pKa = 7.46)
b) for the best buffer system, calculate the ratio of the molarities of the buffer components required to make the buffer
c) for the best buffer system, calculate the ratio of the masses of the buffer components required to make 1.00 L of the buffer
Answer:
a) NH3/NH4Cl (pKa = 9.25)
b) [tex]\frac{[Base]}{[Acid]} =0.708[/tex]
c)
Explanation:
Hello,
a) In this case, for a buffering capacity, if we want to select the best buffer, we should ensure that the buffer's pKa approaches the desired pH, therefore, since the buffer NH3/NH4Cl has a pKa of 9.25 that is very close to the desired pH of 9.10, we can pick it as the best choice.
b) In this case, we use the Henderson-Hasselbach equation in order to compute the molar ratio:
[tex]pH=pKa+log(\frac{[Base]}{[Acid]} )\\\\log(\frac{[Base]}{[Acid]} )=9.10-9.25=-0.15\\\\\frac{[Base]}{[Acid]} =10^{-0.15}\\\\\frac{[Base]}{[Acid]} =0.708[/tex]
c) Finally, for the ratio of masses, we use the molar mass of both ammonia as the base (17 g/mol) and ammonium chloride as the acid (53.45 g/mol) to compute it, assuming 1.00 L as the volume of the solution:
[tex]\frac{m_{Base}}{m_{Acid}} =0.708\frac{molBase}{molAcid}*\frac{17gBase}{1molBase} *\frac{1molAcid}{53.45gAcid}\\ \\\frac{m_{Base}}{m_{Acid}} =0.225[/tex]
Regards.
The best choice to create a buffer with pH 9.10 is NH₃/NH₄Cl (pKa=9.25), ratio of molarities and masses for NH₃/NH₄Cl are 0.708 & 0.225 respectively.
How do we calculate the pH of buffer solution?pH of buffer solution will be calculated by using the Henderson Hasselbalch equation as:
pH = pKa + log([base]/[acid])
From the above reaction it is clear that valu of pH is directly proportional to the value of pKa. So, the pKa value for NH₃/NH₄Cl is comparatively high which will close to the 9.10 pH.Ratio of the molarities for the NH₃/NH₄Cl buffer solution will be calculated by using the Henderson Hasselbalch equation as:log([NH₃]/[NH₄Cl]) = 9.10 - 9.25 =
log([NH₃]/[NH₄Cl]) = -0.15
[NH₃]/[NH₄Cl] = [tex]10^{-0.15}[/tex] = 0.708
Ratio of masses for the NH₃/NH₄Cl buffer solution will be calculated by using the below equation as:M = n/V, where
M = molarity
V = volume = 1L
n = moles = W(mass) / M(molar mass)
Mass(NH₃)/Mass(NH₄Cl) = 0.708 {(mol of NH₃×17g of NH₃NH₃) /
(mol of NH₄Cl×53.45g of NH₄Cl)
Mass(NH₃)/Mass(NH₄Cl) = 0.225
Hence required values are calculated above.
To know more about Henderson Hasselbalch equation, visit the below link:
https://brainly.com/question/13651361
Which of these species would you expect to have the lowest standard entropy (S°)?
a. CH4(g)
b. H2O(g)
c. NH3(g)
d. HF(g)
Answer:
d. HF(g)
Explanation:
Hello,
In this case, the standard entropy S° could be predicted by looking at the amount of bonds the compound has, thus, the fewer the number bonds, the lower the standard entropy, it means that d. HF(g) has lowest value as it has one bond only whereas methane has four bonds, water two bonds and ammonia three bonds.
Best regards.
When 0.100 M NaOH is titrated with 25.00 mL 0.0500 M HBr, which of the following is correct for this titration?
A. Initially the pH will be less than 1.00.
B. The pH at the equivalence point will be 7.00.
C. It will require 12.50 mL of NaOH to reach the equivalence point.
When 0.100 M NaOH is titrated with 25.00 mL 0.0500 M HBr, which of the following is correct for this titration?
A. Initially the pH will be less than 1.00.
B. The pH at the equivalence point will be 7.00.
C. It will require 12.50 mL of NaOH to reach the equivalence point.
a)A, C
b) A, B
c) B, C
d) B
Answer:
c) B, C
Explanation:
NaOH(aq) + HBr(aq) -----> NaBr(aq) +H2O(l)
1) concentration of acid CA= 0.05 M
Concentration of base CB= 0.1 M
Volume of acid VA= 25.00ml
Volume of base VB= unknown
Number of moles of acid NA= 1
Number of moles of base NB= 1
CAVA/CBVB = NA/NB
CAVANB =CBVBNA
VB= CAVANB/CB NB
VB= 0.05 × 25 × 1/ 0.1 ×1
VB= 12.5 ML
2.
What was one important discovery that the Curies made?
O A material's radioactivity cannot be changed by altering the material physically
O A material's radioactivity can be weakened or intensified by changing it chemically.
O Radioactive materials generally contain radium or polonium.
O Radioactive materials are found only in the form of salts.
Answer:
C is the answer to your question
Place the following compounds in order of increasing strength of intermolecular forces. CH4 CH3CH2CH3 CH3CH3 Group of answer choices CH3CH2CH3 < CH4 < CH3CH3 CH4 < CH3CH3 < CH3CH2CH3 CH3CH2CH3 < CH3CH3 < CH4 CH4 < CH3CH2CH3 < CH3CH3 CH3CH3 < CH4 < CH3CH2CH3
Answer:
CH4 < CH3CH3 < CH3CH2CH3
Explanation:
Alkanes are saturated aliphatic hydrocarbons that undergoes intermolecular Van der waals forces. Van der waals forces are the attractive forces which make it possible for non-polar molecules to form liquids and solids.
Van der waals force are described as intermolecular forces arising from induced fluctuating dipoles in atoms and molecules brought about by movement of electrons around the atomic nucleus.
An example of the Van der waals force is the london dispersion force that occurs in the alkane family. It is the weakest of all electrical forces that act between atoms and molecules, These forces are responsible for liquefaction or solidification of non-polar substances at low temperature.
The strength of the intermolecular forces is based on the number of electrons surrounding the molecule and the surface area of the molecule. SO, in alkanes, the longer the carbon chain, the more stronger the intermolecular forces.
If 100-mL of 1.0 M Sr(OH)2 is added to 100 mL of 1.0 M HCl, the pH of the mixture would be _____. Group of answer choices
Answer:
pH = 13.7
Explanation:
A strong acid (HCl) reacts with a strong base Sr(OH)₂ producing water and a salt, thus:
2HCl + Sr(OH)₂ → 2H₂O + SrCl₂
To solve this problem, we need to find initial moles of both reactants and, with the chemical equation find limiting reactant and moles in excess to find pH as follows:
The initial moles of HCl and Sr(OH)₂ are:
100mL = 0.1L ₓ (1.0mol / L) = 0.100 moles of both HCl and Sr(OH)₂
As 2 moles of HCl reacts per mole of Sr(OH)₂, moles of Sr(OH)₂ that reacts with 0.100 moles of HCl are:
0.100 moles HCl ₓ (1 mol Sr(OH)₂ / 2 mol HCl) = 0.050 moles Sr(OH)₂
That means HCl is limiting reactant and after reaction will remain in solution:
0.100 mol - 0.050mol =
0.050 moles of Sr(OH)₂
Find pH:
1 mole of Sr(OH)₂ contains 2 moles of OH⁻, 0.050 moles contains 0.050×2 = 0.100 moles of OH⁻. In 200mL = 0.2L:, molar concentration of OH⁻ is:
0.100 moles / 0.2L =
[OH⁻] = 0.5M
As pOH of a solution is -log[OH⁻],
pOH = -log 0.5M
pOH = 0.301
And knowing:
pH = 14 - pOH
pH = 14 - 0.301
pH = 13.7A central atom has two lone pairs on opposite sides and four single bonds. What is the molecule geometry of the result?
A. octahedral
B. tetrahedral
C. square planar
D. linear
The correct answer is C. square planar
According to the Valence Shell Electron Pair Repulsion Theory(VSEPR), The shape of a molecule depends on the number of electron pairs in the molecule.
VSEPR theory was first coined by Gillespie and Nyhlom in 1957 as an improvement over the Sidgwick - Powell theory.
According to this theory, the shape of a molecule is determined by the number of electron pairs that surround the valence shell of the central atom in the molecule. The electron pairs are positioned as far apart in space as possible to minimize repulsion of electron pairs.
However, the presence of lone pairs distorts the shape anticipated for the molecule on the basis of VSEPR.
For a molecule having six electron pairs, an octahedral geometry is expected(electron domain geometry). However, the presence of two lone pairs which are positioned at opposite side of the four single bonds leads to an observed square planar molecular geometry.
https://brainly.com/question/13591921
Answer:
square planar
Explanation:
Plzzz help and solve this using factor labeling
Answer:
there are 37,8541 liters in 10 gallons
If a sample of C-14 initially contains 1.6 mmol of C-14, how many millimoles will be left after 2250 years
Answer: 1.2 millimoles will be left after 2250 years
Explanation:
Expression for rate law for first order kinetics is given by:
[tex]t=\frac{2.303}{k}\log\frac{a}{a-x}[/tex]
where,
k = rate constant
t = age of sample
a = let initial amount of the reactant
a - x = amount left after decay process
a) for completion of half life:
Half life is the amount of time taken by a radioactive material to decay to half of its original value.
[tex]t_{\frac{1}{2}}=\frac{0.693}{k}[/tex]
[tex]k=\frac{0.693}{5730}=0.00012years^{-1}[/tex]
b) Amount left after 2250 years
[tex]2250=\frac{2.303}{k}\log\frac{1.6}{a-x}[/tex]
[tex]2250=\frac{2.303}{0.00012}\log\frac{1.6}{a-x}[/tex]
[tex]\log\frac{1.6}{a-x}=0.117[/tex]
[tex]\frac{1.6}{a-x}=1.31[/tex]
[tex]{a-x}=\frac{1.6}{1.31}=1.2[/tex]
Thus 1.2 millimoles will be left after 2250 years
g Solution of barium hydroxide reacts with phosphoric acid to produce barium phosphate precipitate and water. How many mL of 6.50 M calcium hydroxide solution are required to react with a phosphoric acid solution of 45.00 mL that has a concentration of 8.70 M protons (hydrogen ions)
Answer:
30.12 mL.
Explanation:
We'll begin by calculating the molarity of the phosphoric acid. This can be obtained as follow:
Phosphoric acid H3PO4 will dissociate in water as follow:
H3PO4(aq) <==> 3H^2+(aq) + PO4^3-(aq)
From the balanced equation above,
1 mole of H3PO4 produces 3 moles of H+.
Therefore, XM H3PO4 will produce 8.70 M H+ i.e
XM H3PO4 = 8.70/3
XM H3PO4 = 2.9 M.
Therefore, the molarity of the acid solution, H3PO4 is 2.9 M.
Next, we shall write the balanced equation for the reaction. This is illustrated below:
2H3PO4 + 3Ba(OH)2 —> Ba3(PO4)2 + 6H2O
From the balanced equation above, we obtained the following:
Mole ratio of the acid, H3PO4 (nA) = 2
Mole ratio of the base, Ba(OH)2 (nB) = 3
Data obtained from the question include the following:
Molarity of base, Ba(OH)2 (Mb) = 6.50 M
Volume of base, Ba(OH)2 (Vb) =.?
Molarity of acid, H3PO4 (Ma) = 2.9 M
Volume of acid, H3PO4 (Va) = 45 mL
The volume of the base, Ba(OH)2 Needed for the reaction can be obtained as follow:
MaVa /MbVb = nA/nB
2.9 x 45 / 6.5 x Vb = 2/3
Cross multiply
2 x 6.5 x Vb = 2.9 x 45 x 3
Divide both side by 2 x 6.5
Vb = (2.9 x 45 x 3) /(2 x 6.5)
Vb = 30.12 mL
Therefore, the volume of the base, Ba(OH)2 needed for the reaction is 30.12 mL
Arrange the compounds in order of decreasing magnitude of lattice energy:
a. LiBr
b. KI
c. CaO.
Rank from largest to smallest.
Answer:
The correct answer is CaO > LiBr > KI.
Explanation:
Lattice energy is directly proportional to the charge and is inversely proportional to the size. The compound LiBr comprises Li+ and Br- ions, KI comprises K+ and I- ions, and CaO comprise Ca²⁺ and O²⁻ ions.
With the increase in the charge, there will be an increase in lattice energy. In the given case, the lattice energy of CaO will be the highest due to the presence of +2 and -2 ions. K⁺ ions are larger than Li⁺ ion, and I⁻ ions are larger than Br⁻ ion.
The distance between Li⁺ and Br⁻ ions in LiBr is less in comparison to the distance between K⁺ and I⁻ ions in KI. As a consequence, the lattice energy of LiBr is greater than KI. Therefore, CaO exhibits the largest lattice energy, while KI the smallest.
Arranging the chemical compounds in order of decreasing magnitude of lattice energy, we have:
c. CaO.
a. LiBr
b. KI
Lattice energy can be defined as a measure of the energy required to dissociate one (1) mole of an ionic compound into its constituent anions and cations, in the gaseous state.
Hence, it is typically used to measure the bond strength of ionic compounds.
Generally, lattice energy is inversely proportional to the size of the ions and directly proportional to their electric charges.
Lithium bromide (LiBr) comprises the following ions:
[tex]Li^+[/tex] and [tex]Br^-[/tex]Potassium iodide (KI) comprises the following ions:
[tex]K^+[/tex] and [tex]I^-[/tex]Calcium oxide (CaO) comprises the following ions:
[tex]Ca^{2+}[/tex] and [tex]O^{2-}[/tex]From the above, we can deduce that there is an increase in the charge possessed by the ionic chemical compounds and as such this would result in an increase in the lattice energy.
In order of decreasing magnitude of lattice energy, the chemical compounds are arranged as:
I. CaO.
II. KI.
III. LiBr.
Read more: https://brainly.com/question/24605723
Which of the following ionic lattices would have the highest melting point?
A. Potassium oxide
w
B. Boron nitride
C. Beryllium oxide
D. Lithium chloride
Answer:
I think, berryllium oxide, is answer.Explanation:
Hope it helps you....The ionic lattices would have the highest melting point Potassium oxide. option A is correct.
what is ionic lattice?An ionic compound is a giant structure of ions. The ions have a regular, repeating arrangement called an ionic lattice. The lattice is formed because the ions attract each other and form a regular pattern with oppositely charged ions next to each other.
Ionic compounds are held together by electrostatic forces between oppositely charged ions.
These forces are usually referred to as the ionic lattice contains such a large number of ions, that a lot of energy is needed to overcome this ionic bonding so ionic compounds have high melting and boiling points.
therefore, sodium oxide has the highest melting point. option A is correct
Learn more about ionic lattice here:
https://brainly.com/question/27549049
#SPJ2
Determine which choice is an example of an endothermic process.
O A. Lighting a match
B. Respiration
C. Running a gas engine
D. Baking bread
Answer:
D. Baking bread
Explanation:
In this process, energy is absorbed and in an endothermic process energy is absorbed too.
Baking bread is an example of an endothermic process, therefore option (d) is correct .
What do you mean by endothermic process ?Endothermic reactions are chemical processes in which the reactants absorb heat from the environment to produce products.
An endothermic reaction is accompanied by an absorption of heat.
Endothermic reactions cause a cooling effect by lowering the temperature of the surrounding environment.
A decrease in temperature can be observed with the progression of the reaction. The reaction is non-spontaneous in endothermic reactions .
Baking bread is an example of an endothermic process, hence option (d) is correct .
Learn more about endothermic process ,here:
https://brainly.com/question/23184814
#SPJ5
Explain the difference between temperature and thermal energy.
Explanation:
the difference between temperature and thermal energy are as follow ,
• The thermal energy, or heat, of an object is obtained by adding up the kinetic energy of all the molecules within it. Temperature is the average kinetic energy of the molecules.
Suppose a student completes an experiment with an average value of 2.9 mL and a calculated standard deviation of 0.71 mL. What is the minimum value within a 1 SD range of the average
Answer:
The correct answer is 2.2 mL.
Explanation:
Given:
Average: 2.9 mL
SD: 0.71 mL
We can define a 1 SD range in which the value of volume (in mL) will be comprised:
Volume (mL) = Average ± SD = (2.9 ± 0.7) mL
Maximum value= Average + SD= 2.9 + 0.7 mL = 3.6 mL
Minimum value= Average - SD = 2.9 - 0.7 mL = 2.2 mL
Thus, the minimum value within a 1 SD range of the average is 2.2 mL
The minimum value within 1 SD is 2.19 mL
The z score is used to determine by how many standard deviations the raw score is above or below the mean. The z score is given by:
[tex]z=\frac{x-\mu}{\sigma} \\\\where\ x\ is\ raw\ score, \mu=mean,\sigma=standard\ deviation[/tex]
Given that μ = 2.9 mL, σ = 0.71 mL; hence:
The minimum value within 1 SD range = μ ± σ = 2.9 ± 0.71 = (2.19, 3.61)
Therefore the minimum value within 1 SD is 2.19 mL
Find out more at: https://brainly.com/question/23907081
which law states that the pressure and absolue tempeture of a fixed quantity of gas are directly proportional under constant volume conditions?
Answer:
Gay lussacs law
Explanation:
PLEASE HELP!!
this is on USAtestprep
a)
b)
c)
d)
Answer:
C.
Explanation:
In warm air, stuff expands, and in cold air, things condense, or decrease in size.
A student is performing a Benedict’s test on an unknown substance. He adds the reagent (the chemical required to make a color change), and nothing happens. What can he conclude? A- The substance is glucose-based. B- The substance is not glucose-based. C- The test was inconclusive because he needed to also test with iodine or vinegar. D- The test was inconclusive because he forgot to add heat.
Answer:
The correct answer is : option D. The test was inconclusive because he forgot to add heat.
Explanation:
Benedict's test is a test that is used to confirm the presence of the simple carbohydrates (mono saccharides and some disaccharides). It is a reagent made by mixture of solution of CuSO4 with sodium citrate and Na2CO3.
Benedict's reagent is added to the substance to test and then heated if it turns yellow to orange or red the presence of simple sugar is confirmed.
Thus, the correct answer is : option D. The test was inconclusive because he forgot to add heat.
Answer:
The test was inconclusive because the student forgot to add heat.
Explanation:
If the test revealed it was not glucose, then the student could run these tests. The student, however, does not need these substances to run the glucose test properly.
Calculate the energy required to heat 566.0mg of graphite from 5.2°C to 23.2°C. Assume the specific heat capacity of graphite under these conditions is ·0.710J·g−1K−1 . Be sure your answer has the correct number of significant digits.
Answer:
7.23 J
Explanation:
Step 1: Given data
Mass of graphite (m): 566.0 mgInitial temperature: 5.2 °CFinal temperature: 23.2 °CSpecific heat capacity of graphite (c): 0.710J·g⁻¹K⁻¹Step 2: Calculate the energy required (Q)
We will use the following expression.
Q = c × m × ΔT
Q = 0.710J·g⁻¹K⁻¹ × 0.5660 g × (23.2°C-5.2°C)
Q = 7.23 J
what are the monomers of bakelite
Answer:
Bakelite is a polymer made up of the monomers phenol and formaldehyde. This phenol-formaldehyde resin is a thermosetting polymer.
Answer: The monomers of bakelite are formaldehyde and phenol
Explanation:
Which of the following is an example of a scientific theory?
Matter can be neither created nor destroyed.
Force equals mass times acceleration.
Matter behaves the way it does because it is made of atoms.
There is probably life on Mars.
C. Matter behaves the way it does because it is made of atoms.
Answer:
Matter can neither be created nor destroyed
Explanation:
Mark me. as brainliest
What is the frequency of a photon having an energy of 4.91 × 10–17 ? (c = 3.00 × 108 m/s, h = 6.63 × 10–34 J · s)
Answer:
The frequency of the photon is 7.41*10¹⁶ Hz
Explanation:
Planck states that light is made up of photons, whose energy is directly proportional to the frequency of radiation, according to a constant of proportionality, h, which is called Planck's constant. This is expressed by:
E = h*v
where E is the energy, h the Planck constant (whose value is 6.63*10⁻³⁴ J.s) and v the frequency (Hz or s⁻¹).
So the frequency will be:
[tex]v=\frac{E}{h}[/tex]
Being E= 4.91*10⁻¹⁷ J and replacing:
[tex]v=\frac{4.91*10^{-17} J}{6.63*10^{-34} J.s}[/tex]
You can get:
v= 7.41*10¹⁶ [tex]\frac{1}{s}[/tex]= 7.41*10¹⁶ Hz
The frequency of the photon is 7.41*10¹⁶ Hz
1. What volume in milliliters of 0.100 M HClO₃ is required to neutralize 40.0 mL of 0.140 M KOH? 2. A 25.0 mL solution of HNO₃ is neutralized with 15.7 mL of 0.250 M Ba(OH)₂. What is the concentration of the original HNO₃ solution?
Answer:
The correct answer is 1) 56 ml and 2) 0.314 M
Explanation:
1. The reaction taking place in the given case is,
HClO₃ + KOH ⇒ KClO₃ + H2O, the molarity of HClO₃ given is 0.100 M, the molarity of KOH given is 0.140 M and the volume of KOH given is 40 ml, there is a need to find the volume of HClO₃.
Therefore, the mole of HClO₃ = mole of KOH
= MHClO₃ × VHClO₃ = MKOH × VKOH
= 0.100 M × VHClO₃ = 0.140 M × 40 ml
VHClO₃ = 0.140 M × 40 ml/0.100 M
VHClO₃ = 56 ml.
2. The reaction taking place is,
2HNO₃ + Ba(OH)₂ ⇒ Ba(NO₃)₂ + 2H₂O
The volume of HNO₃ given is 25 ml, the molarity of Ba(OH)2 is 0.250 M, the volume of Ba(OH)2 is 15.7 ml, the n or the number of moles of HNO₃ is 2, and the n of Ba(OH)2 is 1, the concentration or M of HNO₃ is,
M₁V₁/n₁ = M₂V₂/n₂
M₁ × 25/ 2 = 0.25 × 15.7/1
M₁ or molarity of HNO₃ = 0.314 M
1. The volume of HClO₃ required to neutralize the KOH is 56.0 mL
2. The concentration of the original HNO₃ solution is 0.314 M
1.
First, we will write a balanced chemical equation for the reaction
The balanced chemical equation for the reaction is
HClO₃ + KOH → KClO₃ + H₂O
This means,
1 mole of HClO₃ is required to neutralize 1 mole of KOH
From the titration formula
[tex]\frac{C_{A}V_{A} }{C_{B}V_{B}} = \frac{n_{A}}{n_{B}}[/tex]
Where
[tex]C_{A}[/tex] is the concentration of acid
[tex]C_{B}[/tex] is the concentration of base
[tex]V_{A}[/tex] is the volume of acid
[tex]V_{B}[/tex] is the volume of base
[tex]n_{A}[/tex] is the mole ratio of acid
[tex]n_{B}[/tex] is the mole ratio of base
From the given information,
[tex]C_{A} = 0.100 \ M[/tex]
[tex]C_{B} = 0.140 \ M[/tex]
[tex]V_{B} = 40.0 \ mL[/tex]
From the balanced chemical equation
[tex]n_{A} = 1[/tex]
[tex]n_{B} =1[/tex]
Putting the values into the formula, we get
[tex]\frac{0.100 \times V_{A} }{0.140 \times 40.0} = \frac{1}{1}[/tex]
∴ [tex]0.100 \times V_{A} = 0.140 \times 40.0[/tex]
[tex]V_{A}=\frac{0.140\times 40.0}{0.100}[/tex]
[tex]V_{A}=\frac{5.60}{0.100}[/tex]
[tex]V_{A}=56.0 \ mL[/tex]
Hence, the volume of HClO₃ required to neutralize the KOH is 56.0 mL
2.
First, we will write the balanced chemical equation for the reaction
The balanced chemical equation for the reaction is
2HNO₃ + Ba(OH)₂ → Ba(NO₃)₂ + 2H₂O
This means, 2 mole of HNO₃ is required to neutralize 1 mole Ba(OH)₂
From the given information,
[tex]V_{A} = 25.0\ mL[/tex]
[tex]C_{B} = 0.250 \ M[/tex]
[tex]V_{B} = 15.7 \ mL[/tex]
From the balanced chemical equation
[tex]n_{A} = 2[/tex]
[tex]n_{B} =1[/tex]
Also, Using the titration formula
[tex]\frac{C_{A}V_{A} }{C_{B}V_{B}} = \frac{n_{A}}{n_{B}}[/tex]
We get
[tex]\frac{C_{A} \times 25.0 }{0.250 \times 15.7} = \frac{2}{1}[/tex]
Then,
[tex]C_{A} = \frac{2\times 0.250 \times 15.7} {1 \times 25.0}[/tex]
[tex]C_{A} =\frac{7.85}{25.0}[/tex]
[tex]C_{A} =0.314 \ M[/tex]
Hence, the concentration of the original HNO₃ solution is 0.314 M
Learn more here: https://brainly.com/question/16870772
Solid sodium iodide is slowly added to a solution that is 0.0050 M Pb 2+ and 0.0050 M Ag +. [K sp (PbI 2) = 1.4 × 10 –8; K sp (AgI) = 8.3 × 10 –17] Calculate the Ag + concentration when PbI 2 just begins to precipitate.
Answer:
[Ag⁺] = 5.0x10⁻¹⁴M
Explanation:
The product solubility constant, Ksp, of the insoluble salts PbI₂ and AgI is defined as follows:
Ksp(PbI₂) = [Pb²⁺] [I⁻]² = 1.4x10⁻⁸
Ksp(AgI) = [Ag⁺] [I⁻] = 8.3x10⁻¹⁷
The PbI₂ just begin to precipitate when the product [Pb²⁺] [I⁻]² = 1.4x10⁻⁸
As the initial [Pb²⁺] = 0.0050M:
[Pb²⁺] [I⁻]² = 1.4x10⁻⁸
[0.0050] [I⁻]² = 1.4x10⁻⁸
[I⁻]² = 1.4x10⁻⁸ / 0.0050
[I⁻]² = 2.8x10⁻⁶
[I⁻] = 1.67x10⁻³So, as the [I⁻] concentration is also in the expression of Ksp of AgI and you know concentration in solution of I⁻ = 1.67x10⁻³M:
[Ag⁺] [I⁻] = 8.3x10⁻¹⁷
[Ag⁺] [1.67x10⁻³] = 8.3x10⁻¹⁷
[Ag⁺] = 5.0x10⁻¹⁴MCite examples of how copper deposits occur. Choose one or more: A. as an agglomeration metal B. as a native metal C. in carbonate ore minerals D. in sulfide ore minerals
Answer:
A. as an agglomeration metal
B. as a native metal
D. in sulfide ore minerals
Explanation:
Copper is a metal with symbol Cu and atomic number 29. It has a pinkish-orange color and is malleable, ductile and has a high thermal and electrical conductivity. This is why it is often used in electrical appliances.
Copper exists as an agglomeration metal, as a native metal or in sulfide ore minerals such as Cu2S.
The examples of copper deposits are agglomeration metal, as a native metal or in sulfide ore minerals. Option A, B, and D are correct.
Copper is a metal with high thermal and electrical conductivity. hence, it is often used in electrical appliances.
Copper found as an agglomeration metal, as a native metal or in sulfide ore minerals such as [tex]\bold { Cu_2S.}[/tex]
Therefore, the examples of copper deposits are agglomeration metal, as a native metal or in sulfide ore minerals. Option A, B, and D are correct.
To know more about agglomeration metal,
https://brainly.com/question/17191919
Calculate the molarity of bromide ions in 250. mL of a solution containing 25.9 g NaBr and 0.155 moles of HBr.
Answer:
[tex]1.628 M[/tex]
Explanation:
From the question we were given 0.155 moles of HBr, but Br and H are in ratio 1:1, then there are 0.155 moles of Br- ions.
We were also told that the solution contain NaBr, of 25.9 g. Then it must be converted to moles.
molar mass of NaBr =(22.99g + 79.90 )
= 102.89 g per mol.
the moles of NaBr can be calculated as 25.9 / 102.89
=0.252 moles
But Na and Br are in a ratio 1:1 , then there are 0.252 moles of Br-.
Then to get two Br- mol , we will add the first and second mol of Br- together
= 0.155 + 0.252
=0.407 moles.
The given solution has volume of 250 mL, but we know that there are 1000 ml in a liter, then if we convert to L for unit consistency we have
= 250/1000
= 0.25 L
molarity=0.407 moles/0.25 L
= 1.628 M.
Therefore, Br ion molarity is 1.628 M.
The molarity of the Br ions in the 250 ml solution has been 1.628 M.
Moles can be defined as the mass per unit molecular mass. Moles can be expressed as:
Moles = [tex]\rm \dfrac{weight}{molecular\;weight}[/tex]
Moles of NaBr = [tex]\rm \dfrac{25.9}{102.89}[/tex]
Moles of NaBr = 0.252 mol
Moles of HBr = 0.155 mol.
Since both the compounds have 1:1 ratio of atom: Br, the Br produced has been equal to the concentration of the compound.
Br from NaBr = 0.252 mol
Br from HBr = 0.155 mol.
Total Br ions = 0.407 mol.
Molarity can be expressed as:
Molarity = [tex]\rm moles\;\times\;\dfrac{1000}{Volume\;(ml)}[/tex]
Molarity of Br ions = 0.407 × [tex]\rm \dfrac{1000}{250\;ml}[/tex]
Molarity of Br ions = 1.628 M.
The molarity of the Br ions in the 250 ml solution has been 1.628 M.
For more information about the molarity, refer to the link:
https://brainly.com/question/12127540
2. Which one is the odd one
out and why?
o Water
• Hydrogen
Chlorine
o Aluminum
Answer:
Reaction of Chlorine with Hydrogen Chlorine and Hydrogen mixed together explodes when exposed to sunlight, which produces Hydrogen Chloride. In the dark away from sunlight, no reaction occurs, so light energy is required for a reaction. Cl2 + H2 = 2 HCl Reaction of Chlorine with Non-Metals Chlorine directly combines with most non-metals.
Explanation:
I hope this helps bro
A compound is found to contain 31.42 % sulfur, 31.35 % oxygen, and 37.23 % fluorine by weight. To answer the questions, enter the elements in the order presented above. 1. What is the empirical formula for this compound? 2. The molecular weight for this compound is 102.1 g/mol. What is the molecular formula for this compound?
Explanation:
To obtain the empirical and molecular formula of this compound from the percent composition of the elements, we follow the steps below;
Step 1: Divide the percentage composition by the atomic mass
Sulphur = 31.42 / 32 = 0.9819
Oxygen = 31.35 / 16 = 1.9594
Flourine = 37.23 / 19 = 1.9595
Step 2: Divide by the lowest number
Sulphur = 0.9819 / 0.9819 = 1
Oxygen = 1.9594 / 0.9819 ≈ 2
Flourine = 1.9595 / 0.9819 ≈ 2
This means the ratio of the elements is 1 : 2: 2
The empirical formular (simplest formular of a compound) of the compound is;
SO₂F₂
To obtain the molecular formular (Actual formular of a compound);
(SO₂F₂)n = 102.1
Inserting the atomic masses and solving for n;
(102)n = 102.1
n ≈ 1
The molecular formular is; (SO₂F₂)₁ = SO₂F₂
An aqueous solution of potassium bromide, KBr, contains 4.34 grams of potassium bromide and 17.4 grams of water. The percentage by mass of potassium bromide in the solution is 20 %.
Answer:
True
Explanation:
The percentage by mass of a substance in a solution can be calculated by dividing the mass of the substance dissolved in the solution by the total mass of the solution. This can be expressed mathematically as:
Percentage by mass = mass of substance in solution/mass of solution x 100
In this case;
mass of KBr = 4.34 grams
mass of water = 17.4 grams
mass of solution = mass of KBr + mass of water = 4.34 + 17.4 = 21.74
Percentage by mass of KBr = 4.34/21.74 x 100
= 19.96 %
19.96 is approximately 20%.
Hence, the statement is true.