Answer:
A
Explanation:
• Nina experiences a force equal to f.
Answer:
Nina experiences a force equal to f
Explanation:
got to get that 2nd answer slot correct too before an abusive expert verifier with an alt comes in and purposely verifies the wrong answer
You throw a 20-N rock vertically into the air from ground level. You observe that when it is a height 14.8m above the ground, it is traveling at a speed of 25.0 m/s upward.
A) Use the work-energy theorem to find its speed just as it left the ground. What is it?
B) Use the work-energy theorem to find its maximum height. What is it?
Answer:
30.25 m/s
46.68 m
Explanation:
Work Energy theorem states that
W = ½mv2² - ½mv1²
W = ½m(v2² - v1²)
Net work done by the force = -mgd
Net work done = -m * 9.8 * 14.8
Net work done = -145m
Using the work energy theorem
-145m = ½m(v2² - v1²)
-145m = ½ * m(25² - v1²)
-290m = 625m - v1²m
v1² = 625 + 290
v1² = 915
v1 = √915 = 30.25 m/s
B
-mgd = ½m(v2² - v1²), where v2 = 0, so
-mgd = ½mv1²
Making d the subject of the formula, we have
d = -½mv1²/mg
d = v1²/2g
d = 915/ 2 * 9.8
d = 915 / 19.6
d = 46.68 m
A bat emits a sound at a frequency of 30.0 kHz as it approaches a wall. The bat detects a beat frequency of 700 Hz. The speed of the bat is closest to
Answer:
3.948m/s
Explanation:
To solve this we need to apply Doppler effect theory
So
To find the frequency received by insect will be gotten when the Source and observer both are moving in same direction which is given by
f1 = f0 x (V - Vo)/(V - Vs)
f0 = 30.0 kHz
V = 344 m/s
Vs will now be the speed of the bat and
Vo will be the speed of the object which is = 0 m/s
So substituting we have
f1 = 30 x 10^3 x (344- 0)/(344- Vs)
Next to find the frequency reflected by wall we use
f2 = f1 x (V + Vs)/(V + Vo)
So substituting the value of f1 calculated above we have
f2 = 30 x 10^3 x (344 + Vs) x (344 - 0)/[(344 - Vs) x (344 + 0)]
f2 = 30 x 10^3 x (344 + Vs)/(344- Vs)
But the beat frequency detected by bat is 700 Hz,
So we say
f2 - f0 = 700 Hz
30 x 10^3 x (344+ Vs)/(344 - Vs) - 30x 10^3 = 700
(344 + Vs)/(344 - Vs) = 1 + 700/30000 = 1.023
344 + Vs = 344 x 1.023 - Vs x 1.0233
Vs = 344 x ( 1.023 - 1)/(1 + 1.023)
So finally
Vs = Speed of source that is the bat is = 3.949m/s
12. A sprinter has an acceleration of 5m/s” during the first 2 seconds of the race. What
velocity does she reach after this time?
Answer:
v=10m/s
Explanation:
[tex]a=\frac{vf-vi}{t}\\ 5m/s^{2}=\frac{vf-0}{2}\\ vf=5*2\\vf=10 m/s[/tex]
What is the variable that is manipulated by the experimenter during an experiment called
In a liquid with a density of 1400 kg/m3, longitudinal waves with a frequency of 390 Hz are found to have a wavelength of 7.60 m. Calculate the bulk modulus of the liquid. Express your answer in pascals.
Answer:
The bulk modulus of the liquid is 1.229 x 10¹⁰ Pa
Explanation:
Given;
density of liquid, ρ = 1400 kg/m³
frequency of the wave, f = 390 Hz
wavelength, λ = 7.60 m
The speed of the sound is given by;
v = fλ
v = 390 x 7.6
v = 2964 m/s
The bulk modulus of the liquid is given by;
[tex]v = \sqrt{\frac{B}{\rho}}\\\\v^2 = \frac{B}{\rho}\\\\B = \rho v^2[/tex]
where;
B is bulk modulus
B = (1400)(2964)²
B = 1.229 x 10¹⁰ N/m²
B = 1.229 x 10¹⁰ Pa
Therefore, the bulk modulus of the liquid is 1.229 x 10¹⁰ Pa
what was the average speed in km/h of a car that travels 490.0 km in 4.2 h?
Answer:
116.67 km/h
Explanation:
avarge speed = total distance / total time
Answer: 490 / 4.2 = 116.67 km/h
a ball of mass 100g moving at a velocity of 100m/s collides with another ball of mass 400g moving at 50m/s in same direction, if they stick together calculate the velocity and loss of energy
Answer:
Velocity of the two balls after collision: [tex]60\; \rm m \cdot s^{-1}[/tex].
[tex]100\; \rm J[/tex] of kinetic energy would be lost.
Explanation:
VelocityBecause the question asked about energy, convert all units to standard units to keep the calculation simple:
Mass of the first ball: [tex]100\; \rm g = 0.1\; \rm kg[/tex].Mass of the second ball: [tex]400\; \rm g = 0.4 \; \rm kg[/tex].The two balls stick to each other after the collision. In other words, this collision is a perfectly inelastic collision. Kinetic energy will not be conserved. The velocity of the two balls after the collision can only be found using the conservation of momentum.
Assume that the system of the two balls is isolated. Thus, the sum of the momentum of the two balls will stay the same before and after the collision.
The momentum of an object of mass [tex]m[/tex] and velocity [tex]v[/tex] is: [tex]p = m \cdot v[/tex].
Momentum of the two balls before collision:
First ball: [tex]p = m \cdot v = 0.1\; \rm kg \times 100\; \rm m \cdot s^{-1} = 10\; \rm kg \cdot m \cdot s^{-1}[/tex].Second ball: [tex]p = m \cdot v = 0.4\; \rm kg \times 50\; \rm m \cdot s^{-1} = 20\; \rm kg \cdot m \cdot s^{-1}[/tex].Sum: [tex]10\; \rm kg \cdot m \cdot s^{-1} + 20 \; \rm kg \cdot m \cdot s^{-1} = 30 \; \rm kg \cdot m \cdot s^{-1}[/tex] given that the two balls are moving in the same direction.Based on the assumptions, the sum of the momentum of the two balls after collision should also be [tex]30\; \rm kg \cdot m \cdot s^{-1}[/tex]. The mass of the two balls, combined, is [tex]0.1\; \rm kg + 0.4\; \rm kg = 0.5\; \rm kg[/tex]. Let the velocity of the two balls after the collision [tex]v\; \rm m \cdot s^{-1}[/tex]. (There's only one velocity because the collision had sticked the two balls to each other.)
Momentum after the collision from [tex]p = m \cdot v[/tex]: [tex](0.5\, v)\; \rm kg \cdot m \cdot s^{-1[/tex].Momentum after the collision from the conservation of momentum: [tex]30\; \rm kg \cdot m \cdot s^{-1}[/tex].These two values are supposed to describe the same quantity: the sum of the momentum of the two balls after the collision. They should be equal to each other. That gives the equation about [tex]v[/tex]:
[tex]0.5\, v = 30[/tex].
[tex]v = 60[/tex].
In other words, the velocity of the two balls right after the collision should be [tex]60\; \rm m \cdot s^{-1}[/tex].
Kinetic EnergyThe kinetic energy of an object of mass [tex]m[/tex] and velocity [tex]v[/tex] is [tex]\displaystyle \frac{1}{2}\, m \cdot v^{2}[/tex].
Kinetic energy before the collision:
First ball: [tex]\displaystyle \frac{1}{2} \, m \cdot v^2 = \frac{1}{2}\times 0.1\; \rm kg \times \left(100\; \rm m \cdot s^{-1}\right)^{2} = 500\; \rm J[/tex].Second ball: [tex]\displaystyle \frac{1}{2} \, m \cdot v^2 = \frac{1}{2}\times 0.4\; \rm kg \times \left(50\; \rm m \cdot s^{-1}\right)^{2} = 500\; \rm J[/tex].Sum: [tex]500\; \rm J + 500\; \rm J = 1000\; \rm J[/tex].The two balls stick to each other after the collision. Therefore, consider them as a single object when calculating the sum of their kinetic energies.
Mass of the two balls, combined: [tex]0.5\; \rm kg[/tex].Velocity of the two balls right after the collision: [tex]60\; \rm m\cdot s^{-1}[/tex].Sum of the kinetic energies of the two balls right after the collision:
[tex]\displaystyle \frac{1}{2} \, m \cdot v^{2} = \frac{1}{2}\times 0.5\; \rm kg \times \left(60\; \rm m \cdot s^{-1}\right)^2 = 900\; \rm J[/tex].
Therefore, [tex]1000\; \rm J - 900\; \rm J = 100\; \rm J[/tex] of kinetic energy would be lost during this collision.
Explain in your own words the interaction between the electric and magnetic fields that make up a light wave.
Answer:
They oscillates perpendicularly to one another, the oscillation of one field generates the other field.
Explanation:
In a light wave, an oscillating electric field of a light wave produces a magnetic field, and the magnetic field also oscillates to produce an electric field. The magnetic field and the electric field of a light wave both oscillates perpendicularly to one another. The resultant energy and direction of the wave generated as a result of these oscillating fields is propagated perpendicularly to both fields.
A sinusoidal transverse wave travels along a long, stretched string. The amplitude of this wave is 0.0957 m, its frequency is 3.75 Hz, and its wavelength is 1.97 m. What is the shortest transverse distance between a maximum and a minimum of the wave?
Answer:
Shortest distance = 0.1914 m
Explanation:
Given that,
Amplitude of the wave is 0.0957 m
Frequency of the wave is 3.75 Hz
Wavelength of the wave is 1.97 m
We need to find the shortest transverse distance between a maximum and a minimum of the wave.
The distance between maximum point in positive axis and the baseline is equal to amplitude.
Shortest distance = 2 A
D = 2 × 0.0957
D = 0.1914 m
So, the shortest transverse distance between a maximum and a minimum of the wave is 0.1914 m.
Jennifer has taught her pet rat to run a maze. She thinks that the rat will
go faster if she puts its favorite treat at the end. She has the rat run the
maze ten times with the favorite treat and ten times with a regular food
pellet. She uses a stopwatch to measure how long it takes for the rat to get
to the reward.
O Replication
O Repetition
In the drawing, what is the vector sum of forces A→+B→+C→ if each grid square is 7.00 N on a side? If the resultant is eastward, enter a positive value and if the resultant is westward, enter a negative value.
Answer:
resultant force = 14 N ( East direction)
Explanation:
A = √( (4*7)² + (4*7)² )
A = 39.6 N
B = 4 * 7
B = 28 N
C = 2 * 7
C = 14 N
∑ y forces = Ay - B = (4*7) - 28 = 0
∑ x forces = Ax - C = (4*7) - 14 = 14 N
so the resultant force = 14 N ( East direction)
Timmy drove 2/5 of a journey at an average speed of 20 mph.
He drove the remaining 60 miles at another speed. If the
average speed for the whole journey was 25 mph, what's the
amount of time for the whole journey?
Answer:
4hr
Explanation:
The total time Timmy spent in the whole journey is 4 hours.
The given parameters;
average speed of Timmy for [tex]\frac{2}{5}[/tex] of the journey = 20 mphthe remaining fraction of the journey = 60 milesaverage speed of the entire journey = 25 mphThe total distance of the journey is calculated as follows;
[tex]( 1 - \frac{2}{5} ) \times total = 60 \ miles\\\\\frac{3}{5} \times total = 60\\\\total = \frac{60 \times 5}{3} \\\\total = 100 \ miles[/tex]
The amount of time for the whole journey is calculated as follows;
[tex]average \ speed = \frac{total \ distance}{total \ time} \\\\total \ time = \frac{100 \ miles }{25 \ mph} \\\\total \ time = 4 \ hours[/tex]
Thus, the total time Timmy spent in the whole journey is 4 hours.
Learn more here:https://brainly.com/question/17289046
Which of the following statements are true according to the uncertainty principle? A. It is impossible to simultaneously determine both the energy and the momentum of a particle with arbitrary accuracy. B. It is impossible to determine a particle's energy with arbitrary accuracy in a finite amount of time. C. It is impossible to simultaneously determine both the position and the momentum of a particle with arbitrary accuracy. D. It is impossible to measure the position of a particle with arbitrary accuracy in a finite amount of time. E. It is impossible to simultaneously measure both the energy and position of a particle with arbitrary accuracy.
Answer and Explanation: Heisenberg's Uncertainty Principle states that if the position of the particle is known, its momentum is unknown and vice-versa.
So, it is impossible to determine both the position and the momentum of a particle with arbitrary accuracy.
The statement, " It is impossible to simultaneously determine both the position and the momentum of a particle with arbitrary accuracy" is correct. Hence, option (c) is correct.
The given problem is based on the Heisenberg's uncertainty principle. As per the Heisenberg's uncertainty principle, "It is not possible to obtain both the momentum and position of particles at same time, if one is obtained with full certainty then other comes uncertain". And the expression for the Heisenberg's principle is,
[tex]\Delta x \times \Delta p \geq \dfrac{h}{4\pi}[/tex]
Here,
[tex]\Delta x[/tex] is the uncertainty in position.
[tex]\Delta p[/tex] is the uncertainty in momentum.
h is the Planck's constant.
So, as per the above definition the statement, " It is impossible to simultaneously determine both the position and the momentum of a particle with arbitrary accuracy" is justified.
Thus, we can conclude that the statement, " It is impossible to simultaneously determine both the position and the momentum of a particle with arbitrary accuracy" is correct. Hence, option (c) is correct.
Learn more about the Heisenberg's uncertainty principle here:
https://brainly.com/question/2663406
A rough value of deceleration of a skidding automobile is about 7.0m\s^2.using this how long does it take for a car going at 30m\s to stop after the skid starts.How far dose the car go in this time??
Explanation:
Given:
v₀ = 30 m/s
v = 0 m/s
a = -7.0 m/s²
Find: t and Δx
v = at + v₀
0 m/s = (-7.0 m/s²) t + 30 m/s
t = 4.3 seconds
v² = v₀² + 2aΔx
(0 m/s)² = (30 m/s)² + 2 (-7.0 m/s²) Δx
Δx = 64 meters
light of wavelength 587.5 nm illuminates a slit of width 0.75 mm. at what distance from the slit should a screen be placed if the first minimum in the diffraction pattern is to be 0.85 mm from the central maximum?
1.085m
Explanation:
Using
a= lambda/sinစ
Sinစ= (587.5*10^-9) x 0.75*10^-3
= 0.000783
Sinစ=0.875*10^-3/d
0.000783= 0.875/d
d= 1.085m
You're driving on a straight road (in the x direction) at a constant speed of 28 m/s. In 10 seconds, you speed up to 37 m/s to pass a truck. (a) Assuming your car speeds up at a constant rate (constant force by the road on the tires), what is your average x component of velocity vavg,x during this maneuver
Answer:
The average [tex]x[/tex] component velocity [tex]V_{avg,x}[/tex] is 32.5 m/s
Explanation:
v = u +at bhjklj kj h
x = (u + v / 2 )t
Average velocity is given by
[tex]V_{avg} = \frac{Displacement}{Time} \\V_{avg} = \frac{x_{2} - x_{1} }{t_{2} - t_{1} }[/tex]
From the question,
Initial speed, u = 28 m/s
Final speed, v = 37 m/s
Time, t = 10 secs
From the formula
[tex]x = (\frac{u + v}{2})t\\[/tex]
where [tex]x[/tex] is the displacement
Put the given values into the equation to find the displacement [tex]x[/tex]
[tex]x = (\frac{28 + 37}{2}) 10\\ x = (\frac{65}{2})10\\ x = (\frac{32.5}{10})\\ x = 325 m[/tex]
Now, for the average [tex]x[/tex] component velocity [tex]V_{avg,x}[/tex]
[tex]V_{avg} = \frac{Displacement}{Time} \\V_{avg} = \frac{x_{2} - x_{1} }{t_{2} - t_{1} }[/tex]
[tex]V_{avg,x} = \frac{325 - 0}{10 - 0}\\V_{avg,x} = \frac{325}{10}\\ V_{avg,x} = 32.5 m/s[/tex]
Hence, the average [tex]x[/tex] component velocity [tex]V_{avg,x}[/tex] is 32.5 m/s
The average x component of velocity during the maneuver of the truck is 32.5 m/s.
Velocity:
The term velocity of any object is defined as the ratio of displacement covered by any object to the time taken by the object to displace.
Given data:
The magnitude of initial speed is, u = 28 m/s.
The magnitude of final speed is, v = 37 m/s.
The time interval is, t = 10 s.
The displacement covered by the truck is calculated as,
[tex]d = \dfrac{v+u}{2} \times t\\\\ d = \dfrac{37+28}{2} \times 10\\\\ d = 325 \;\rm m[/tex]
Now, the expression for the x-component of the average velocity is given as,
[tex]v_{x}=\dfrac{d}{t}[/tex]
Solving as,
[tex]v_{x}=\dfrac{325}{10}\\\\ v_{x}=32.5 \;\rm m/s[/tex]
Thus, we can conclude that the average x component of velocity during the maneuver of truck is 32.5 m/s.
Learn more about the average velocity here:
https://brainly.com/question/862972
g The velocity (V) of a particle is given by 5t2 meters, where t is in s. Find the acceleration of the particle at t=3s.
Answer:
Acceleration, [tex]a=45\ m/s^2[/tex]
Explanation:
The velocity of a particle is given by :
[tex]V=5t^2[/tex]
t is time in seconds
The acceleration in terms of velocity is given by :
[tex]a=\dfrac{dv}{dt}\\\\a=\dfrac{d(5t^2)}{dt}\\\\a=5\times \dfrac{t^3}{3}[/tex]
We need to find the acceleration of the particle at t = 3 s. Put t = 3 s in the expression of a.
So,
[tex]a=\dfrac{5\times 3^3}{3}\\\\a=45\ m/s^2[/tex]
So, the acceleration of the particle at t = 3 s is [tex]45\ m/s^2[/tex].
What is (Fnet3)x, the x-component of the net force exerted by these two charges on a third charge q3
This question is incomplete, the complete question is;
Coulomb's law for the magnitude of the force F between two particles with charges Q and Q' separated by a distance d is
|FI = |QQ'I / d²
where K = 1/4π∈0, and
∈0 = 8.854 × 10⁻¹² C²/(N.m²) is the permittivity of free space.
Consider two point charges located on the x-axis:
one charge, q₁ = -18.5 nC, is located at
x₁ = -1.715m; the charge q₂ = 30.5 nC, is at the origin ( x₂=0 )
What is (Fnet3)x, the x-component of the net force exerted by these two charges on a third charge q₃ = 51.0 nC placed between q₁ and q₂ at x₃ = -1.085 m ?
Answer: (Fnet3)x = -3.3287 × 10⁻⁵ N
Explanation:
Given that;
Q₁ = -18.5 nC Q₃ = 51 nC Q₂ = 30.5 nC
x₁ = - 1.715m x₃ = - 1.085m x₂ = 0
Now
x - component of Net force on charge Q₃ is
(Fnet3)x = -K|Q₁I|Q₃I / r₁3² - -K|Q₂I|Q₃I / r₂3²
(Fnet3)x = -(9×10⁹)(51×10⁻⁹) [ 18.5 / ((-1.085 + 1.715)²) + (30.5 / (-1.085)² ] × 10⁻⁹
(Fnet3)x = -3.3287 × 10⁻⁵ N
Which of the following does a microscope use to produce an image?
a) reflection
b) refraction
c) total internal reflection
d) two of A, B, and C
e) all of A, B, and C
Answer:
All of a,b, and c hope this helps
Describe a sound wave. Discuss what determines pitch and volume.
Answer:
The amplitude of a sound wave is a reflection of how much energy is carried, which contributes to the intensity of the sound. Intensity is measured in decibels and is perceived as sound volume. Thus, the volume is proportional to the amplitude of the sound wave. The frequency of a sound wave is perceived as pitch.
Explanation:
The amount of energy carried by a sound wave is reflected in its amplitude, which affects the sound's intensity. The perception of intensity as sound loudness is expressed in decibels. Hence, the relationship between the volume and the sound wave's amplitude is clear. Pitch is the perceived frequency of a sound wave.
What is wave ?Wave is is a disturbance in a medium that carries energy as well as momentum . wave is characterized by amplitude, wavelength and phase. Amplitude is the greatest distance that the particles are vibrating. especially a sound or radio wave, moves up and down. Amplitude is a measure of loudness of a sound wave. More amplitude means more loud is the sound wave.
Wavelength is the distance between two points on the wave which are in same phase.
Phase is the position of a wave at a point at time t on a waveform.
There are two types of the wave longitudinal wave and transverse wave.
Longitudinal wave : in which, vibration of the medium (particle) is parallel to propagation of the wave. Sound wave is a longitudinal wave.
Transverse wave : in which, vibration of the medium (particle) is perpendicular to propagation of the wave. Light wave is a Transverse wave.
To know more about sound :
https://brainly.com/question/29707602
#SPJ2.
How could you record the number 4000 and report 2 significant figures?
Explanation:
Write in scientific notation.
4000 = 4.0×10³
similarity of gravity and electromagnetic force
Answer:
Gravity is an attractive force as well as electromagnetic, but electromagnetic attracts and repels.
Explanation:
URGENT!!! Which option(s) correctly define an electric circuit? (Select all that apply) a set-up where current flows without a voltage difference an open path of conductors a set-up where current flows due to a voltage difference a closed path of conductors
Answer:
a set up where current flows without a voltage difference
Explanation:
because a circuit is a set up of different components, and throughout the circuit the voltage is the same, even with more components
Answer:
a set-up where current flows due to a voltage difference
a closed path of conductors
Explanation:
34. JAnswer this: Pure (24 carat) gold has a density of 19 g/mL. If you bought"gold" ring and found it had a volume of 0.3 ml and that it weighed 5.7 grams, is it pure gold? Show your work to support your answer.
Explanation:
Density = mass / volume
ρ = 5.7 g / 0.3 mL
ρ = 19 g/mL
Yes, it's pure gold.
Yes, it's pure gold.
How do you calculate gold density?The mass of an object divided by its volume is the formula for determining density. This is expressed mathematically as d = m/v, where d denotes density, m denotes mass, and v denotes object volume. The common measurements are kg/m³.What is the formula of volume?The basic formula for volume is length, breadth, and height, as opposed to length, width, and height for the area of a rectangular shape.What is the volume of pure gold?Gold has a specific gravity of 19.3. In light of this, 19.3 grams take up 1 cubic centimeter. 31.1 grams make up a Troy ounce. As a result, we need 31.1/19.3 = 1.61 cubic centimeters to equal 1 Troy Oz.According to the question:
Density = mass / volume.
ρ = 5.7 g / 0.3 mL.
ρ = 19 g/mL.
Hence, Yes it's pure gold.
Learn more about gold density here:
https://brainly.com/question/4935901
#SPJ2
5. What kind of mirror would you use if you needed to start a fire using a mirror? Why? At what position would you place the kindling from the mirror?
Answer:
Concave mirror
The kindling should be positioned at the focus point of the mirror
Explanation:
A concave mirror should be used, because it forms a real image, and focuses the image of an incident ray coming from a distant source on a single point. These mirrors are called "converging mirrors" because they tend to collect light that falls on them, refocusing parallel incoming rays toward a focus, and are sometimes used to collect light from a large area and focus it into a small spot, as in concentrated solar power.
Speedy Sue, driving at 35.0 m/s, enters a one-lane tunnel. She then observes a slow-moving van 160 m ahead traveling at 5.20 m/s. Sue applies her brakes but can accelerate only at −1.90 m/s2 because the road is wet. Will there be a collision?
Answer:
Hence, there will be a collision
Explanation:
First we calculate total distance covered by the speedy sue's car before coming to rest:
2as = Vf² - Vi²
where,
a = deceleration = - 1.9 m/s²
s = distance covered = ?
Vf = Final Velocity = 0 m/s (since car finally stops)
Vi = Initial Velocity = 35 m/s
Therefore,
2(-1.9 m/s²)s = (0 m/s)² - (35 m/s)²
s = 322.37 m
Now, we calculate time taken by car to stop:
Vf = Vi + at
0 m/s = 35 m/s + (-1.9 m/s²)t
t = 18.42 s
Now, we calculate distance traveled by van in this time:
s₁ = V₁t
where,
s₁ = distance traveled by van = ?
V₁ = speed of van = 5.2 m/s
Therefore,
s₁ = (5.2 m/s)(18.42 s)
s₁ = 95.78 m
Now, for collision to occur, the following relation must be satisfied:
s ≥ 160 m + s₁
using values:
322.37 m > 160 m + 95.78 m
322.37 m > 255.78 m
Hence, there will be a collision
for an ideal gas, a plot of In P versus 1 / T (in Kelvin) yields a straight line with a slope equal to
What does CWT stand for?
hundredweight cwt is a standard unit of weight or mass used in certain commodities trading contracts.
Answer:
hundredweight
Explanation:
We can model the human back as a pivoted rod?
Answer:
So the answer is yes, we can the back be shaped like a spinning rod
spinal column that is approximated by a long and narrow rod,
Explanation:
The bone system of the body is very well modeled in physics, the back has a spinal column that is approximated by a long and narrow rod, this rod is fixed in the lower part to the coccyx and has a weight in the upper part (head), this rod has longitudinal vertical movement and twisting movement around the lower part of the bar.
So the answer is yes, we can the back be shaped like a spinning rod
A stone is thrown directly upward with an initial speed of 4 m/s from a height of 20 m. After what time interval does the stone strike the ground
Given :
( Let , take upward direction +ve and downward direction -ve )
Initial speed of stone , u = 4 m/s .
Height , h = 20 m .
To Find : Time taken to reach ground .
Solution :
We know , by equation of motion .
Displacement is given by :
[tex]h=h_o+ut+\dfrac{gt^2}{2}\\\\0=20+4t-2t^2\\\\t^2-2t-10=0[/tex] ( Here , g = acceleration due to gravity = [tex]-9.8\ m/s^2[/tex] .)
Solving above equation , we get :
t = 4.32 s .
Hence , this is the required solution .