If the theoretical yield of a reaction is 332.5 g and the percent yield for the reaction is 38 percent, what's the actual yield of product in grams? \

A. 8.74 g
B. 12616 g
C. 116.3 g
D. 126.4 g

Answer:

d. None of the above

Explanation:

A buffer works when pH of the buffer is ± 1. Out of this range, the buffering capacity is very low.

Acetic acid, CH₃CO₂H, has a pKa of 4.74. That means its buffering capacity is between 3.74 and 5.74 of pH. Is not a good buffer to pH 7

Pyridine is a weak base with pKa of 5.52. Its buffering capacity is between 6.52 and 4.52. Is not a good buffer to pH 7

HCl is a strong acid. Just weak acids and bases can produce a buffer with its conjugate base. HCl can't produce a buffer.

Thus, right answer is:

Answer:

CH3CO2H

Explanation:

A weak acid, such as acetic acid, paired with its conjugate base (here, the acetate ion) will be an ideal system for creating an acidic buffer solution with a pH below 7.

Answer:

[tex]\huge\boxed{Density}[/tex]

Explanation:

This is because of density. Since Ice is less dense than water, the ice even formed inside the pond then starts floating on the surface of water. Because of this density, Ice floats on water and thus the water freezes at the surface.

Answer:

Density

Explanation:

Water is less dense as a solid than as a liquid, so as ponds freeze, the ice floats at the top and the pond freezes from the top-down.

Answer:

It is difficult because of C

Explanation:

The correct answer is:Some substances keep the same molecular structure when they break down, and others do not.

Some substances change their form when they dissolve and some do not. Dissolution can sometimes be regarded as a sort of reaction between a chemical substance and water.

Usually, we can consider dissolution of a substance in water as a sort of chemical reaction for some substances. For instance, an ionic substance interacts with water to form ions. similarly, some salts become hydrolysed in water and give acidic/basic solutions as  result of that.

However, some substances do not interact with water upon dissolution. They rather remain as molecular entities because they are not composed of ions.

We can see that some substances keep the same molecular structure when they break down, and others do not keep the same molecular structure  when they dissolve hence it is difficult to classify dissolving as a physical or a chemical change.

https://brainly.com/question/1161517

Answer:

[tex]H_2O[/tex]

Explanation: Research has proven that ;

Water is a Polar Covalent Molecule

It consists of 2 Hydrogen molecules bonded to one Oxygen molecule and  the two hydrogen atoms are not evenly distributed around the oxygen atom.

Explanation:

why is because I never did this class

hxhdhdvhshwhzhzbs dsybsj hshsjshdvsk hate and hensksnsb show hxbshsn Hicks ay the back

Answer:

0.05 mole of Br2.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

C2H4 + Br2 —› C2H4Br2

From the balanced equation above,

1 mole of C2H4 reacted with 1 mole of Br2 to produce 1 mole of C2H4 Br2.

Finally, we shall determine the number of moles bromine that will react with 0.05 mole of C2H2.

The number of mole of Br2 needed for the reaction can be obtained as follow:

From the balanced equation above,

1 mole of C2H4 reacted with 1 mole of Br2.

Therefore, 0.05 mole of C2H4 will also react with 0.05 mole of Br2.

Therefore, 0.05 mole of Br2 is needed for the reaction.

Answer:

1229.08975 kPa

Explanation:

Given that:

The depth of the water = 100 m below the surface of the water.

The density of the water = 1150 kgm

The mass of the water = depth of the water × density of the water

The mass of the water = 100 m × 1150 kgm

The mass of the water = 115000 kgf/m²

The mass of the water is the pressure of the water at a depth of 100 m below the surface of the water.

Since 1 kgf/m² = 0.00980665 kPa

Then  115000 kgm² = (115000  ×  0.00980665) kPa

=  1127.76475 kPa

At standard temperature and pressure , the atmospheric pressure = 101.325 kPa.

Therefore, the pressure below the surface of sea water  = 1127.76475 kPa +   101.325 kPa

= 1229.08975 kPa

Answer:

[tex]E=2.06\times 10^{-19}\ J[/tex]

Explanation:

Given that,

The wavelength of electromagnetic radiation is 963.5 nm.

We need to find the energy of a photon with this wavelength.

The formula used to find the energy of a photon is given by :

[tex]E=\dfrac{hc}{\lambda}\\\\E=\dfrac{6.63\times 10^{-34}\times 3\times 10^8}{963.5\times 10^{-9}}\\\\E=2.06\times 10^{-19}\ J[/tex]

So, the energy of a photon is [tex]2.06\times 10^{-19}\ J[/tex].

Answer:

A. Saturated acids  -  1. myristic acid, 4. palmitic acid

B. Monounsaturated acids  - 2. oleic acid

C. Polyunsaturated acids -  3. linoleic acid

Explanation:

Saturated fatty acids are the fats combined together with a single bond and no double or triple bond while unsaturated fatty acids are the fats having a double or triple bond between them.

Monosaturated acids have only one double or triple bond while polyunsaturated acids have more than one double or triple bond.

So, an appropriate match of given acids are:

A. Saturated acids  - Myristic acid (CH3(CH2)12COOH) and Palmitic acid (CH3(CH2)14COOH) dont have any double or triple bonds.

B. Monounsaturated acids  - Oleic acid (CH3(CH2)7CH=CH(CH 2)7COOH) have only one double bond.

C. Polyunsaturated acids - Linoleic acid (HOC–7CH=CH–CH 2–CH=CH–3H) has two double bonds.

Hence, the correct answer is:

A. Saturated acids  -  1. myristic acid, 4. palmitic acid

B. Monounsaturated acids  - 2. oleic acid

C. Polyunsaturated acids -  3. linoleic acid

Answer: NaCl would give the higher pressure

Explanation:

Osmotic pressure depends only on the number of ions.

NaCl dissociates as Na+ and Cl- ; CsBr  dissociates as Cs+ and Br-

But the concentration of the solutions are different.  

Concentration (morality ) of NaCl = Moles /Litre = (1 g /58.44g/mol)/0.01L

Total number of ions in NaCl solution = 2 x (1 g /58.44g/mol)/0.01L ( 1 mol NaCl gives 2 moles ions, 1 mol Na+ and 1 mol Cl-)  

= 1.71×2RT

Similarly total number of ions in CsBr solution = 2 x (1 g /212.80 g/mol)/0.01L

= 0.47×2RT

Therefore osmotic pressure is higher in NaCl solution.

Answer:

Here are four possible voltaic cells.  

Explanation:

1. Standard reduction potentials

                                         E°/V

I₂(s) + 2e⁻ ⟶ 2I⁻(aq);        0.54

Cu²⁺(aq) + 2e⁻ ⟶ Cu(s);   0.34

Fe²⁺(aq) + 2e⁻ ⟶ Fe(s);   -0.41

Zn²⁺(aq) + 2e⁻ ⟶ Zn(s);   -0.76

2. Possible Voltaic cells

(a) Zn/I₂

                                                                       E°/V

Anode:     Zn(s) ⟶ Zn²⁺(aq) + 2e⁻;                 0.76

Cathode:  I₂(s) + 2e⁻ ⟶ 2I⁻(aq);                     0.54

Cell:         Zn(s) +  I₂(s) ⟶  Zn²⁺(aq) + 2I⁻(aq); 1.30

Zn(s)|Zn²⁺(aq)∥I⁻(aq)|I₂(s)|C(s, graphite)

Zn is the anode; graphite is the cathode.

(b) Zn/Cu²⁺

                                                                          E°/V

Anode:     Zn(s) ⟶ Zn²⁺(aq) + 2e⁻;                    0.76

Cathode:  Cu²⁺(aq) + 2e⁻ ⟶ Cu(s);                  0.34

Cell:          Zn(s) +  Cu²⁺(s) ⟶  Zn²⁺(aq) + Cu(s); 1.10

Zn(s)|Zn²⁺(aq)∥Cu²⁺(aq)|Cu(s)

Zn is the anode; Cu is the cathode.

(c) Zn/Fe²⁺

                                                                            E°/V

Anode:     Zn(s) ⟶ Zn²⁺(aq) + 2e⁻;                     0.76

Cathode:  Fe²⁺(aq) + 2e⁻ ⟶ Fe(s);                    -0.41

Cell:          Zn(s) +  Fe²⁺(s) ⟶  Zn²⁺(aq) + Fe(s);  0.35

Zn(s)|Zn²⁺(aq)∥Fe²⁺(aq)|Fe(s)

Zn is the anode; Fe is the cathode.

(d) Fe/I₂

                                                                         E°/V

Anode:     Fe(s) ⟶ Fe²⁺(aq) + 2e⁻;                   0.41

Cathode: I₂(s) + 2e⁻ ⟶ 2I⁻(aq);                     0.54

Cell:         Zn(s) +  I₂(s) ⟶  Zn²⁺(aq) + 2I⁻(aq); 0.95

Fe(s)|Fe²⁺(aq)∥I⁻(aq)|I₂(s)|C(s, graphite)

Fe is the anode; graphite is the cathode.

Answer:

C. electronegativity

Explanation:

THE ELEMENT WITH THE GREATE ELECTRONEGATIVITY IS ASSIGNED A NEGATIVE OXIDATION NUMBER EQUAL TIO ITS CHARGE

Answer:

the chemical equation of ethanol as fuel is

C2H5OH(l)+3 02(g)------2CO2(g)+3H2O(g)

the preparation process of ethanol from cassava is

cassava flour---liquification---saccharification---cooling---fermentation---distillation---ethanol

Question is incomplete, the complete question is as follows:

A student wants to examine a substance by altering the bonds within its molecules. Which of the following properties of the substance should the student examine?

A. Toxicity, because it can be observed by altering the state of the substance

B. Boiling point, because it can be observed by altering the state of the substance

C. Toxicity, because it can be observed by replacing the atoms of the substance with new atoms

D. Boiling point, because it can be observed by replacing the atoms of the substance with new atoms

Answer:

B.

Explanation:

A student can examine a substance without altering the bonds within the molecules by examining its boiling point.

The boiling point is the property of a substance, at which the substance changes its state, which is from solid to liquid, liquid to gas and others. So, examining the boiling point will alter the bonds within the molecules as the state of substance will change.

Hence, the correct answer is "B".

Answer:

8 CO₂(g)

Explanation:

just took the exam

Answer:

d) NH4F

Explanation:

Hello,

In this case, the base resulting from mixing a weak acid and a weak base is d) NH4F since ammonium hydroxide is a wear base and hydrofluoric acid is a weak acid.

Ammonium hydroxide is a weak base since it is not completely ionized in ammonium and hydroxyl ions:

[tex]NH_4OH\rightarrow NH_4^++OH^-[/tex]

Moreover, hydrofluoric acid is a weak acid since it is not completely ionized in hydrogen and fluoride ions:

[tex]HF\rightleftharpoons H^++F^-[/tex]

For the both of the substances, the limit is established by the basic and the acid dissociation constant respectively.

Regards.

Answer:

[tex]SF_4[/tex]

Explanation:

The first thing would be to calculate the number of moles of each element in the compound.

No of moles of sulfur (S) = mass/molar mass

                                        = 29.68/32.065 = 0.9256

No of moles of fluorine (F) = mass/molar mass

                                       = 70.32/18.998 = 3.7014

Then, let us find the atomic ratio of each of the element in the compound by dividing by the no of moles by the smallest no of mole:

            S            :             F

      [tex]\frac{0.9256}{0.9256}[/tex] = 1       :       [tex]\frac{3.7014}{0.9256}[/tex] = 4

Therefore, the empirical formula for the compound is [tex]SF_4[/tex]

Answer:

[tex]6.4knips[/tex]

Explanation:

Hello,

In this case, given the stated equivalences, we can use the following proportional factor in order to compute the required knips:

[tex]knips=1.00knop*\frac{6bippy}{1knop} *\frac{8pringle}{10bippy}* \frac{3blip}{18pringle} *\frac{4clips}{5blips} *\frac{10knip}{1clip} \\\\=6.4knips[/tex]

Regards.

1 knop=6.4 knips

First convert knop to bippy:-

[tex]1\ knop\times\frac{6\ bippy}{1\ knop} =6\ bippy[/tex]

Now, Convert 6 bippy to pringle:-

[tex]6\ bippy\times\frac{8\ pringle}{10\ bippy} =4.8\ pringle[/tex]

Now, convert 4.8 pringle to blip:-

[tex]4.8\ pringle\times\frac{3\ blip}{18\ priangle} =0.8\ blip[/tex]

Now, convert 0.8 blip to clips as follows:-

[tex]0.8\ blip\times\frac{4\ clips}{5\ blip} =0.64\ clip[/tex]

Now, convert 0.64 clip to knips:-

[tex]0.64\ clip\times\frac{10\ knip}{1\ clip} =6.4\ knip[/tex]

Hence, the following conversion is as follows:-

1.00 knop=6.4 knips

To know more about:-

https://brainly.com/question/17229463

Answer:

They are mostly located in group 18 (column 18), or far right

Answer:

D. The Ca[OH]2 solution may have been unsaturated

Explanation:

The solubility product constant Ksp of any given chemical compound is a term used to describe the equilibrium between a solid and the ions it contains solution. The value of the Ksp indicates the extent to which any compound can dissociate into ions in water. A higher the Ksp, implies more greater solubility of the compound in water.

If the Ksp is more than the value in literature, this false value must have arisen from the fact that the solution was unsaturated hence it appears to be more soluble than it should normally be when saturated.

Answer:

Two constitutional isomers for the compound C3H8S are shown in the attachment below

Explanation:

Constitutional isomers are isomers that have the same molecular formula but different connectivity. Two constitutional isomers for the compound C3H8S are shown in the attachment below.

As per the concept of structural isomers, the  two constitutional isomers that share the molecular formula C₃H₈S are attached in attachment below.

Structural isomers are defined as the isomers  in which atoms are completely  arranged  in a different order but the molecular formula remains the same.

They are the molecules which have same molecular formula but different  connectivities  of atoms  which depend on the order they are put together. An increase in the number of carbon atoms leads to an increase  in the structural isomers.

Learn more about structural isomers,here:

https://brainly.com/question/33929317

#SPJ6

Answer:

hydrogen nitrate + sodium hydrochlorate- sodium nitrate+ water + co2 (acid base reaction)

silver nitrate + calcium chloride - silver chloride+ calcium nitrate ( double displacement reaction)

hydrogen + nitrogen - ammonia gas ( simple contact reaction)

hydrogen peroxide - water + oxygen ( single displacement reaction)

Hope it helps :)

Answer:

Underneath the frozen upper layer, the water remains in its liquid form and does not freeze. Also, oxygen is trapped beneath the layer of ice. As a result, fish and other aquatic animals find it possible to live comfortably in the frozen lakes and ponds. ... This irregular expansion of water is called anomalous expansion.

Explanation:

so pretty much its because there is water under the top frozen layer and air is trapped underneath the ice

Answer:

Molar mass is the mass of one mole of a substance and is ontained by adding atomic mases of all the constituent atoms and group of atoms.

Atomic masses: Cu = 63.55 g/mol,

S = 32.07 g/mol

O x 4 = 16.00 g/mol x 4 = 64.00 g/mol

H = 1.008 g/mol,

So, H2O = (2*1.008+16.00)*5 = 90.10 g/mol

Molar mass of CuSO4,5H2O = 249.72 g/mol.

Out of that 249.72 grams, 90.10 grams is water,

So, percentage by mass of water in CuSO4,5H2O

= 90.10*100/249.72 = 36.08.

I think this is what you are asking. hope this helps

Answer:

A

Explanation:

The change in entropy for the surroundings in a situation where heat flows from a hotter system to a cooler surrounding is Greater than Zero.

Here the randomness of the molecules increase as the temperature of the surrounding increases.( it absorbs heat from the system).

Answer:

Option a (Greater than zero) is the correct answer.

Explanation:

Some other three choices don't apply to either the situations in question. And the correct approach will be Options A.

Answer:

False

Explanation:

Reaction rates is a field under chemical kinetics that deals with the measure of speed of a chemical reaction. It is the change in the concentration of a reactant or product per unit time.

Activation Energy is a theory been  put forward to explain why different chemical reactions proceed at different rates.

Activation Energy theory postulates that for a reactant to transform into a product , the colliding particles or molecules of the reactant must possess a certain amount of energy so as to overcome the reaction barrier.

An important factor which may influence the attainment of activation energy by colliding particles of reactants is the temperature at which the reaction is carried out. The higher the temperature, the  greater is the fraction of the reactant particles which possess the activation energy and thus the faster the reaction becomes. SO , in essence increasing the temperature of a reaction system do not decreases the activation energy of the reaction but rather also increases  the activation energy of the reaction.

Answer:

105/22*(1.251-0.620)

105/22*0.631

4.772*0.631

3.011132

Hope it helps

Answer:

3.0

Explanation:

First, complete the operations inside the parenthesis according to the normal rules for significant figures. Because there are subsequent calculations, keep at least one extra significant figure when possible: (4.7727) × (0.631).

The final product will be rounded to two significant figures because it can’t be more precise than the least precise number in the problem, 22. The final product is 3.0.

Answer:

The reaction given is:

In (g) + H₂ (g) ⇔ InH₂ (g), the Kp is 1.48 at 973 K.

The partial pressures measured in the reaction vessel is Partial pressure of In is 0.0540 atm, partial pressure of H₂ is 0.0250 atm, and the partial pressure of InH₂ is 0.0780 atm. By using the table given in the attachment below, the value of PInH₂ is (0.078-x), PIn is (0.054 + x), and the value of PH2 is (0.025 + x).

Kp = PInH₂/PIn × PH₂ = (0.078 - x) / (0.054 +x) (0.025 + x)

1.48 = (0.078 - x) / (0.054 +x) (0.025 + x)

x = 0.06689

Now the partial pressures of In, H₂ and InH₂ will be,

PH₂ = 0.025 + x = 0.025 + 0.0668 = 0.0918 atm

PIn = 0.054 + 0.0668 = 0.1208 atm

PInH₂ = 0.078 - 0.0668 = 0.0112 atm

Now the Qp or the reaction quotient will be,

Qp = (0.078) / (0.054) (0.025) = 57.78.

The compound that has been soluble in water will be LiCl. Thus option E is correct.

The compounds that form stable bonds in water and are easy to dissociate are soluble in water. Generally, ionic compounds are easily soluble in water.

It has been an ionic compound, but the dissociation of AgCl will simultaneously form AgCl again making the compound insoluble in water.

It has been a covalent compound, thus it has been insoluble in water.

The compound is covalent in nature, thus it has been hard to dissociate in water.

The copper in the compound has been hard to dissolve and precipitate in the solution.

It has been an ionic compound and can be easily dissociated in the water.

Thus the compound that has been soluble in water will be LiCl. Thus option E is correct.

For more information about the soluble compounds, refer to the link:

https://brainly.com/question/1397002

Answer:

Explanation:

True